Tender For Beautification Of Central Median From Kazi Para More To Shibpur Burning Ghat Cr Of Jagat Baneerjee Ghat Road.
Tender Value
1.45 Crore
Estimated cost
Bid Submission
24 Oct 2026
11 days left
EMD
2.90 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Howrah → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Beautification Of Central Median From Kazi Para More To Shibpur Burning Ghat Cr Of Jagat Baneerjee Ghat Road.
BOQ
| Sl. No. | Item Description |
| 1 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared . CPWD 2023 V-I, P-91 , CN-2.31 |
| 2 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge .CPWD 2023 V-II, P-220 , CN-15.7.4 |
| 3 | Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per direction of Engineer-in-charge .CPWD 2023 V-II, P-221 , CN-15.19 |
| 4 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m . CPWD 2023 V-I, P-87 , CN-2.8.1 |
| 5 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete . CPWD 2023 V-I, P-90 , CN-2.27 |
| 6 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. CPWD 2023 V-I, P-90 , CN-2.25 |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 . CPWD 2023 V-I, P-96 , CN-4.1.5 |
| 8 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) . CPWD 2023 V-I, P-105 , CN-5.1.2 |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form work for :Foundations, footings, bases for columns etc. CPWD 2023 V-I, P-98 , CN-4.3.1 |
| 10 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars . CPWD 2023 V-I, P-110 , CN-5.22.1 |
| 11 | Providing, designing, fabricating, supplying and installing in position heritage/historical image panels of 4 mm thick exterior grade Aluminium Composite Panel (ACP), consisting of 3 mm FR-grade mineral core sandwiched between two aluminium sheets of 0.5 mm thickness each, including preparation of approved artwork/design and CNC/router cutting of the ACP sheet to approved historical/heritage image/profile, including all cutting, shaping, edge finishing and drilling; providing and fabricating necessary secondary supporting frame of mild steel hollow sections/structural sections including perimeter and intermediate members, cleats and connection plates; welding, cutting, grinding and fixing; applying one coat of approved zinc-rich/anti-corrosive primer and two coats of approved exterior-grade protective paint/aluminium finish to MS framework; providing stainless steel screws, bolts, nuts, washers, spacers, cleats, sealant and other necessary fixing accessories; fixing the complete ACP panel and MS secondary MSH of 40 mm x 40 mm x 3 mm supporting frame to the existing MS supporting structure, including all necessary connections, alignment, plumbing, lifting, transportation, loading/unloading, tools and tackles, wastage, cleaning and finishing complete as per approved drawing/design, manufacturer's specifications and as directed by the Engineer-in-Charge. . Rate Analysis |
| 12 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete . CPWD 2023 V-I, P-170 , CN-10.2 |
| 13 | Providing and fixing mild steel round holding down bolts with nuts and washer plates complete . CPWD 2023 V-I, P-172 , CN-10.19 |
| 14 | Providing, supplying, fitting and fixing 4 mm thick Aluminium Composite Panel (ACP) cladding/paneling on existing MS supporting frame, consisting of 3 mm FR-grade mineral core sandwiched between two aluminium sheets each 0.5 mm thick, exterior grade and PVDF/fluoropolymer coated, including cutting to required size, edge preparation, drilling, providing necessary cleats/brackets, stainless steel screws, bolts, nuts, washers, spacer tape, weather/structural sealant, backer rods and all other necessary accessories, fixing the ACP panels to the MS supporting frame, maintaining proper alignment, level and uniform joints, including all labour, transportation, loading/unloading, handling, tools and tackles, wastage and cleaning of completed work, complete as per approved drawing, manufacturer's specifications,and as directed by the Engineer-in-Charge . Rate Analysis |
| 15 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth . Cement mortar 1:6 CPWD 2023 V-I, P-118 , CN-6.1.2 |
| 16 | 15 mm cement plaster of mix :1:6 . CPWD 2023 V-II, P-200 , CN-13.2.2 |
| 17 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : 13.61.1 Two or more coats on new work . CPWD 2023 V-II, P-204 , CN-13.61.1 |
| 18 | Cleaning works of Park premises with maintenance and watering plant and shurb . Unskilled Worker (Mali, Grass Cutter, Jamadars) for 5 Yrs Refer:Govt. of WB, No : 27/Stat/14/RW/24/2023/LCS/JLC, Dt : 22/06/26 |
| 19 | Excavating, supplying, stacking and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all lift . CPWD 2023 V-I, P-90 , CN-2.25 |
| 20 | Supplying and stacking at site dump manure from approved source, including carriage upto 5 km lead complete (manure measured in stacks will be reduced by 8% for payment) :Screened through sieve of I.S. designation 20 mm .CPWD Horticulture and landscaping 2025 P-101 It-2.4.1 |
| 21 | Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately). .CPWD Horticulture and landscaping 2025 P-101 It-2.8 |
| 22 | Planting and Maintaining of Flowering Plants and Shrubs (Reference to MORT&H's specification 307).Planting flowering plants and shrubs in central verge. PWD NH Wing P-227 It-8 |
| 23 | B (Electrical Work)Supplying & Erection of mini size feeder pillar box of Size Each 7053.00 (918 x 561 x 382 mm) made up of 2 mm thick MS Plate along with suitable M.S. Angle. The P.B. have double hinge door at the front & back with suitable locking arrangement. The box will be painted by 2 cores of aluminiam paint over 1 coat of red oxide paint. Suitable arrangement should be provided for fixing of Timer unit, fuse unit & other accessories. Leg of the pillar box will be 900 mm in length by made up of (35 x 35 x 3 mm MS Angle with suitable base Plate. Legs of the Pillar box will be erected at 300 mm below the ground level with cement concrete (6:3:1). Rest portion coverd by 5\\" Brick Wall with plastering & net cement & bottom portion filled with silver sand as drawing & direction of E.I.C . UDMA/Elec.-Mech.works/2018/P-7/I-38 |
| 24 | Supply and fixing of 240/230 volt, 50 Hz, T.P., power contactor (Make: L&T/ABB/ Schneider/Simence/GE) having contact block of the following range. 32-55 Amp UDMA/Elec.-Mech.works/2018/P-16/I-18(f) |
| 25 | Supply and delivery of Electronic Timer suitable for 240/ 360/415V, 50 Hz (Make: &T/ABB/Schneider/Simence/GE/Minilic) of the following time (Second) range:12.0 to 120.0 UDMA/Elec.-Mech.works/2018/P-19/I-31(b) |
| 26 | Supplying and fixing Sheet steel Main Switches on Flat iron frame on wall 32A, Havells Make. 240V DP with fuse on L&NPWD/Elec.works/2017/P-D-1/1-a |
| 27 | Supplying & fixing sheet metal (16 SWG) Iron Clad Busbar chambers on angle iron frame on wall, incl. earthing attachment and painting as required( As per Drawing no. 470 of PWD Specification Book - May 1991)2 bar, 240 V 63A.PWD/Elec.works/2017/P- D-12/I-19(a) |
| 28 | Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.2+4 way, Enclosure (DHDPSNODRW04), Havells Make. PWD/Elec.works/2017/P-D-9/I-13 |
| 29 | Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and nécessary connection.40A, DP, Havels Make PWD/Elec.works/2017/P- D-5/I-6 |
| 30 | supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection .6-32A, SP, Havells Make PWD/Elec.works/2017/P- D-6/I-7 |
| 31 | Supply and fixing of Town Glow Post Top IP66/IK10 Post Top lantern with symmetric Light distribution complete with all accessories to be fixed on suitable pole incl. bolts and nuts incl making drilled holes etc to fixing up the landscape lighting pole complete.Make: Havells, 50W LED . I & WD (M & E)2022 /P-112/I-5.3-F-13.0.2 |
| 32 | Supplying & fixing of LED Bollard Light complete with all accessories. Make Crompton 10Watt I & WD (M&E)2022/P-112/I-5.3-F-14.0.4 |
| 33 | Distribution wiring in 1.1 KV single core stranded FR: PVC insulated & unsheathed copper wire. (Brand approved by EIC) in 20mm size PVC ngid conduit 'FR (Precision make) incl.necy. fittings as required 2 x 22/0.3(1.5 x sqmm) + 1 x 22 / 0.3 (1.5 sqmm) ECC . PWD/Elec.works/2017/P- E-14/I-a(1) |
| 34 | S/F M.S. loop box (14 SWG) of size 10 cm x 10 cm x 7.5 cm Each suitable for housing the water-tight switch and providing the wire lead in lead out arrangement for switch and lamp holder connection. One side of the cover lid of the box is to be hinged type and the other side with proper clamping and locking arrangement the box. The set is to be fixed in suitable position on iron leg on wall as per direction of Engineer-In-Charge. UD&MA/Electrical-Mechanical works/2018/P-6/I-32 |
| 35 | Supplying & wiring in 6.0 sqmm 'FR' stranded Copper wire single core inside feeder piller box as per direction of E.I.C. Ref: PWD/Elec.works/2017/P-K-2/Sl No.-73 |
| 36 | Supply and delivery of LT power cable Aluminium conductor, 2 core, 6 sqmm armouredUD&MA/Electrical-Mechanical works/2018/P-11/I-1(b/1) |
| 37 | Laying of cable upto 2 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc as necy. mending good damages and painting PWD/Elec.works/2017/P- F-1/I-2-a |
| 38 | Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (hot Dip) wire (4 Mts.long), 13 mm dia x 80 mm long GI bolts, double nuts,double washers incl. S&F 15 mm dia GI pipe protection (1 Mt.long)to be filled with bitumen partly under the ground level and partly above groung level driven to an average depth of 3.65 Mts.below the ground level. By ISI-Medium G.I Pipe. PWD/Elec.works/2017/P-G-1/I-2(a) |
| 39 | Supplying & Delivery of LED Garden Spike Light with die cast aluminium housing,IP65 Protection, Make- PhilipsMarket Rate (Online) |
| 40 | Hoisting fixing and commissioning of luminaries including making necessary connection and earthing attachment:HPMV/HPSV luminaries/LED fittings of any wattage.UD&MA/Electrical-Mechanical works/2018/P-35/I-7 |
| 41 | Supply and fixing of Sky Cove LED Strip Light (5M length) with driver and necessary connection. Make : Havells, LED Strip SKYCove 5M WW with driver I & WD (M & E)2022 /P-112/I-5.3 F.12.01 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysOct 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender