Tender For Special Repair To electrical installation And Renewal Of Led Fittings, Ceiling Fans, Plug Sets, 1 Kva Ups And Power Mains To The Health Sub Center At A.N.Valasai In Tirupathur District.
Tender Value
1.98 Lakhs
Estimated cost
Bid Submission
21 Oct 2026
10 days left
EMD
1980
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tirupathur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To electrical installation And Renewal Of Led Fittings, Ceiling Fans, Plug Sets, 1 Kva Ups And Power Mains To The Health Sub Center At A.N.Valasai In Tirupathur District.
BOQ
| Sl. No. | Item Description |
| 1 | Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with Module Plastic surface mounting box on wall with 6A one way module switch with module front plate with painting of Suitable colour for Open PVC Light point / fan point (for electronic regulator) 5 points / coils Higher End |
| 2 | Renewal by supply and fixing of 9W LED bulb for Existing BH point . |
| 3 | Renewal by Supply and fixing of 4 Feet LED 20W Fitting with LED 20W tube (Higher End) complete with TW round blocks on wall or ceiling with PVC unsheathed FRLS Copper leads from terminals to the fitting |
| 4 | Renewal by Supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm dia GI bend complete on the existing post/ on wall with PVC unsheathed FRLS copper leads with MS clamps and with painting |
| 5 | Renewal by supply and fixing of 1200mm (48\\") sweep AC ceiling fan complete ( Higher end) with 2 module 100W fan step regulator (Higher end) with 600mm down rod on the existing fan clamp |
| 6 | Supply and fixing of 5A flush type switch on existing switch box |
| 7 | Renewal by Supply and fixing of 5A flush type socket on existing switch box |
| 8 | Renewal by Supply and fixing of 1 no.6A two module 3 pin socket , 1 no. 6A one module switch on suitable module surface mounting Box (Plastic) with module cover plate (plastic) on wall with connections. Higher End |
| 9 | Renewal by supply and fixing of 2 nos.6/16A two module socket , 2 nos. 16A one module switch on suitable module surface mounting Box (Plastic) with module cover plate (plastic) on wall with connections. Higher End |
| 10 | Renewal by Supply and fixing of 3 nos.6A two module 3 pin socket , 3 nos. 6A one module switch on suitable module surface mounting Box ( Plastic ) with module cover plate (plastic) on wall with connections. Higher End |
| 11 | Renewal by Supply and fixing of AC / DC 76mm buzzer / call bell suitable for 230 volts 50 c/s single phase AC supply on suitable TW board with push switch |
| 12 | Renewal by Supply and fixing of 12V 1 KVA Automatic Inverter with input Voltage range 180V-260V and output Voltage 200V-230V 50Hz with micro controller based design for 1 Hrs Back up like microtek/Aftha/equivalent with 1 Nos 12V- 150AH Tubular battery/equivalent and testing complete. |
| 13 | Renewal by Supply and fixing of Meter box of size 3 ft x 2 ft x 1 ft consisting of 16 SWG Sheet suitable AI frame work and Spray Painting with 2 coats or Red Oxide and 2 coats of enamel Painting for existing meter board |
| 14 | Renewal by Supply and run of 2 of 1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with painting of suitable colour |
| 15 | Renewal by Supply and run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 4 sq.mm copper wire with painting of suitable colour |
| 16 | Earthing as per PWD standard with an earth electrode of 2 metre Class'B'GI pipe of dia not less than 32mm complete with necessary masonry work |
| 17 | Renewal by Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection |
| 18 | Less credit |
| 19 | GST @ 18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysOct 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender