Defence Statutory Bodies & Commissions/Committees Closing in 18 days TDR #57858298

Tender For Provision Of Otm Accn For Certain Unit At Jaisalmer Mil Station

Issued by Statutory Bodies & Commissions/Committees · Jaisalmer, Rajasthan
Tender Value
10.40 Crore
Estimated cost
Bid Submission
30 Nov 2026
18 days left
EMD
8.45 Lakhs
Bank guarantee accepted
Document Fee
3000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Jaisalmer → Rajasthan
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Provision Of Otm Accn For Certain Unit At Jaisalmer Mil Station

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 06-Oct-2026 Corrg TD Other 24-Oct-2026
2 06-Oct-2026 Arch3 Other 24-Oct-2026
3 06-Oct-2026 Arch2 Other 24-Oct-2026
4 06-Oct-2026 Corrigendum No 01 Other 24-Oct-2026
5 06-Oct-2026 Arch6 Other 24-Oct-2026
6 06-Oct-2026 Arch5 Other 24-Oct-2026
7 06-Oct-2026 Arch4 Other 24-Oct-2026
8 06-Oct-2026 Strdrg Other 24-Oct-2026
9 14-Oct-2026 Corrigendum No 02 Date 07-Nov-2026
10 29-Oct-2026 Corrigendum No 03 Date 16-Nov-2026
11 08-Nov-2026 Corrigendum No 04 Date 30-Nov-2026

BOQ

Name of Work:- PROVISION OF OTM ACCN FOR CERTAIN UNIT AT JAISALMER MIL STATION
Sl. No. Item Description
1Lump Sum price worked out by the contractor for \\"BUILDING & STRUCTURE\\" as listed in Schedule ‘A’ Part-I representing percentage (+ or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No.
2Lump Sum price worked out by the contractor for \\"SITE CLEARANCE, EXCAVATION & EARTH WORK \\" as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No.
3Lump Sum price worked out by the contractor for \\"INTERNAL WATER SUPPLY\\" as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES B/F from Sl page No.
4Lump Sum price worked out by the contractor for \\"INTERNAL ELECTRIFICATION\\" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No.
5Lump Sum price worked out by the contractor for \\"SEWAGE DISPOSAL\\" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No.
6Lump Sum price worked out by the contractor for \\"AREA DRAINAGE\\" as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 49
7Lump Sum price worked out by the contractor for \\"ROAD, PATH & CULVERT \\" as listed in Schedule ‘A’ Part-VII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No.
8Lump Sum price worked out by the contractor for \\"FENCING\\" as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES B/F from Sl page No.
9Lump Sum price worked out by the contractor for \\"EXTERNAL WATER SUPPLY\\" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES B/F from Sl page No.
10Lump Sum price worked out by the contractor for \\"EXTERNAL ELECTRIC SUPPLY\\" as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No.
11Lump Sum price worked out by the contractor for \\"LIGHTNING PROTECTION\\" as listed in Schedule ‘A’ Part-XI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No.
12Lump Sum price worked out by the contractor for \\"SUMMER APPLIANCES\\" as listed in Schedule ‘A’ Part-XII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No.
13Lump Sum price worked out by the contractor for \\"HOT WATER SUPPLY\\" as listed in Schedule ‘A’ Part-XIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No.
14Lump Sum price worked out by the contractor for \\"ABORICULTURE\\" as listed in Schedule ‘A’ Part-XIV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No.
15Sch 'A' PART-XV (MISCELLANEOUS B&R AND E&M WORKS) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as \\"Rs 0.00\\" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items which categorically includes for same shall be measured and paid separately under respective schedule.
16Internal Water SupplyS & F of CP wall mixer with provision for overhead shower with 115mm long bend plpe on upper side, connecting legs & wall flanges and fixed complete all as specified and directed.Make - Jaquar fusion Series Cat Part No FUS - CHR - 29273UPR or equivalent.
17S & F overhead shower 150 x 150mm of square shape single flow with rubit cleaning system ABS body come plated with gray face plate with arm having swivel joint chromium compete all as specified and directed.Make - Jaquar Queen Series Cat Part No OHS - 35495 or equivalent.
18S & F health faucet with 1200mm long flexible mild steel tube 15mm dia with wall hook and complete all as specified and directed.Make - Jaquar Queen Series Cat Part No ALD - 573 or equivalent.
19S & F of 15mm bore fancy type chromium plated bib taps with wall flange, screwed for iron pipe or CPVC pipes or for brass ferrule and fixed complete all as specified and directed.Make - Jaquar Cat Part No FUS - CHR - 29037 or equivalent
20S & F of 15mm bore fancy type chromium plated angular stop cock screwed for iron pipe or CPVC pipes or for brass ferrule and fixed complete all as specified and directed.Make - Jaquar Cat Part No ORP - CHR - 10053 PM or equivalent
21S & F two way bib cock with wall flange chromium plated fancy type 15 bore complete all as specified and directed.Make - Jaquar Cat Part No LYR - CHR - 38041 or equivalent
22INTERNAL ELECTRIFICATION Supply and Fix wall/ceiling mounted touch control and motion sensor modular kitchen chimney with auto clean feature cutting edge technology, oil collector, suction 1400+/-100 Cubic Meter per hours, 230 Volt, size 90cm / 3 feet, noise less than 58 Db suitable for properly removing the smoke, odour, steam and heat from inside of kitchen complete all as specified and directed
23S & F LED light fittins table mounting type with hifgh output diffuser 10 Watt, 2' length , 220 Volt AC decorative type with driver holder and connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed.
24S & F LED LED light fittins 36 Watt, 2 x 2 LED panel light, surface / ceiling mounting , slim square , backlist panel luminaires including LED driver holder and connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed.
25Supply & fix 12 Watt LED Downlight having luminous efficacy of > 120, input voltage range 140-270 Volt, input frequency 50-60 Hz complete all as specified and as directed.
26S & F LED security light fitting made out of pressure die cast aluminium powder coated housing high impact resistant 4mm thick toughened glass cover and matrix of power LEDs inbuilt electronic driver up to 4 KV surge protection fitted with adjustable pole adapter to enable on site tilt angle setting depending on road geometry CCT 5500-6500 CRI greater than 70 , input power 30 Watt output operating voltage 140-280 Volt with connection by three core PVC insulated multistranded copper conductor sheathed cable of size 1.0 Sqmm fixed with & including bracket made of GI pipe 40mm bore light grade, 1.6 Mtr long bent to shape required with 2 No MS clamps of suitable size and length, nuts & bolts complete all as specified and as directed.
27Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 Volt to 250 Volt with output voltage stabilized at 230 Volt with accuracy of ± 2.5% and of capacity 4 KVA complete all as specified and directed. Make :- Servo or Equivalant as given in Appdx 'C' list of makes
28Supply and fixing load line distribution board TPN vertical, 4 way double door type, fixed on wall semi flush with incoming MCCB 4 poles 100 Amps, 16 KA, busbars , neutral link, blanking plates complete with all accessories all as specified and as directed. Note : Outgoing MCBs shall be measured and paid separately.
29S & F Modular type RJ-11 Gang with shutter (Telephone Jack) with all accessories all as specified and as directed.
30S & F Modular modular type TV Co-axial socket with all accessories all as specified and as directed.
31EXTERNAL WAER SUPPLYConstruction of brick masonry valve pit of size 90cm x 90cm X 90cm (internal dimensions) with one brick thick wall in cement mortar 1:4 on 100mm thick PCC 1:4:8 type D-2 (using 40mm graded broken stone aggregate) as in foundation lean concrete, including PCC 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) as in benching and coping and 10mm thick cement plaster in CM (1:4) internally and externally upto 15cm below ground level providing valve pit cover 40x 40 x 6mm angle iron frame all-round fixed by means of 4 Nos holdfast 150mm long made out of flat iron 40 x 6mm embedded in PCC block 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) of size 230 x 200 x 100mm including provn of hinges welded with angle iron frame and MS cover 3mm thick sheet, MS handle of suitable length and size welded with MS cover and suitable locking arrangement and applying two coats of synthetic enamel paint over a coat of red oxide primer including necessary excavation and earth work in soft / loose soil complete all as shown on drawing and as specified.
32All as per item No 31 above but of size 60cm x 60cm x 60cm (internal dimensions)
33EXTERNAL ELECTRIC SUPPLY Supply and fixing, commissioning & testing of LT weather proof panel board powder coated outdoor typ, double door shutter, made out of CRCA 3.00mm thick outer and 1.6mm thick for inner door confirming to IS-8623 with angle iron 50 x 50 x 6mm outoor, floor mounting type with closed bus bar, chamber and with Aluminium bus bar with necessary insulator suitable for 3 phase, 4 wire 50 Hz AC supply as per CPRI approved including provn of digital ammeter 0-500 Amps, digital voltemeter 0-500 Volts, CT's of suitable ratio, indicator lamps R-Y-B, selector switches and internal wiring including making PCC block type 0.6 Mtr above ground level grouting etc all as specified and directed with the following Work also includes provision of suitable size of cable glands, cable lugs, nut, bolts, washers etc. The bottom portion of enclosure shall be minimum 60cm above ground level of legs of angle iron complete all as specified and directed including the following :- (Main Panel from 100 KVA Transformer) (a) Aluminium bus bar capacity 300 Amps for Phase-R-Y-B - 3 Nos & one for neutral -1 No (b) MCCB FP 200 Amp, 25 KA - 01 No (c) MCCB FP 100 Amp, 16 KA - 01 No (O/G to FP 1)(d) MCCB FP 63 Amp, 16 KA - 02 Nos (O/G to FP 2) (e) MCB TPN 25 Amp-01 No (O/G to Street light 3 phase junction box)(f) MCB SPN 10 Amp, 10 KA - 02 Nos (O/G to Storage Accn& Sentry Post)(g) Timer with synchronous timer 0-24 Hrs suitable for street light control and with suitable ML 3 contactor three phase 20 Amps capacity - 01 Set
34Supply and fixing, commissioning & testing of LT weather proof panel board powder coated outdoor typ, double door shutter, made out of CRCA 3.00mm thick outer and 1.6mm thick for inner door confirming to IS-8623 with angle iron 50 x 50 x 6mm outoor, floor mounting type with closed bus bar, chamber and with Aluminium bus bar with necessary insulator suitable for 3 phase, 4 wire 50 Hz AC supply as per CPRI approved including provn of digital ammeter 0-500 Amps, digital voltemeter 0-500 Volts, CT's of suitable ratio, indicator lamps R-Y-B, selector switches and internal wiring including making PCC block type 0.6 Mtr above ground level grouting etc all as specified and directed with the following Work also includes provision of suitable size of cable glands, cable lugs, nut, bolts, washers etc. The bottom portion of enclosure shall be minimum 60cm above ground level of legs of angle iron complete all as specified and directed including the following :- (Feeder Panel - 01 for Adm bldg & Guard house)(a) Aluminium bus bar capacity 150 Amps for Phase-R-Y-B - 3 Nos & one for neutral -1 No (b) MCCB FP 63 Amp, 25 KA - 01 No (I/C)(c) MCCB FP 63 Amp, 16 KA - 01 No (O/G to Adm bldg )(d) MCB SPN 32 Amp, 10 KA - 01 No (O/G to Guard house)
35Supply and fixing, commissioning & testing of LT weather proof panel board powder coated outdoor typ, double door shutter, made out of CRCA 3.00mm thick outer and 1.6mm thick for inner door confirming to IS-8623 with angle iron 50 x 50 x 6mm outoor, floor mounting type with closed bus bar, chamber and with Aluminium bus bar with necessary insulator suitable for 3 phase, 4 wire 50 Hz AC supply as per CPRI approved including provn of digital ammeter 0-500 Amps, digital voltemeter 0-500 Volts, CT's of suitable ratio, indicator lamps R-Y-B, selector switches and internal wiring including making PCC block type 0.6 Mtr above ground level grouting etc all as specified and directed with the following Work also includes provision of suitable size of cable glands, cable lugs, nut, bolts, washers etc. The bottom portion of enclosure shall be minimum 60cm above ground level of legs of angle iron complete all as specified and directed including the following :- (Feeder Panel - 02 for Mt & garage) (a) Aluminium bus bar capacity 100 Amps for Phase-R-Y-B - 3 Nos & one for neutral -1 No (b) MCCB FP 63 Amps, 25 KA - 01 No (I/C)(c) MCB TPN 63 Amp - 01 No (O/G to MT Office) (d) MCB TPN 16 Amp - 01 No (O/G to Washing Ramp) (e) MCB SPN 10 Amp, 10 KA - 02 Nos (O/G to Garrage I &II)
36Supply and fixing , commissioning & testing of LT weather proof panel board powder coated outdoor typ, double door shutter, made out of CRCA 3.00mm thick outer and 1.6mm thick for inner door confirming to IS-8623 with angle iron 50 x 50 x 6mm outoor, floor mounting type with closed bus bar, chamber and with Aluminium bus bar with necessary insulator suitable for 3 phase, 4 wire 50 Hz AC supply as per CPRI approved including provn of digital ammeter 0-500 Amps, digital voltemeter 0-500 Volts, CT's of suitable ratio, indicator lamps R-Y-B, selector switches and internal wiring including making PCC block type 0.6 Mtr above ground level grouting etc all as specified and directed with the following Work also includes provision of suitable size of cable glands, cable lugs, nut, bolts, washers etc. The bottom portion of enclosure shall be minimum 60cm above ground level of legs of angle iron complete all as specified and directed including the following :- (Feeder Panel - 03 for SM Barrack) (a) Aluminium bus bar capacity 150 Amps for Phase-R-Y-B-3 Nos & one for neutral -1 No (b) MCCB FP 100 Amp 25 KA - 1 No (I/C)(c) MCCB FP 63 Amp 16 KA - 03 Nos (O/G for SM Barrack & cook house, Spare)
37Supply and fixing , commissioning & testing of LT weather proof Bus bar Box powder coated, outdoor type, double door shutter, made out of CRCA 3.00mm thick outer and 1.6 mm thick for inner door confirming to IS-8623 with angle iron 50 x 50 x 6mm outoor, floor mounting type with closed bus bar, chamber and with Aluminium bus bar with necessary insulator suitable for 3 phase, 4 wire 50 Hz AC supply as per CPRI approved including making PCC block type 0.6 Mtr above ground level grouting etc all as specified and directed includes provision of suitable size of cable glands,cable lugs, nut, bolts, washers etc . The bottom portion of enclosure shall be minimum 60cm above ground level of legs of angle iron complete all as specified and directed.
38Supply and fixing street light bracket made out of 32mm dia GI Pipe of length 1.50 Mtr long including fixing with MS clamps - 2 Nos made out of 50mm wide, 5mm thick flat iron with M.S nuts bolts 75mm long 12mm dia - 4 Nos with flat washer (3mm thick) - 02 Nos for each including painting with aluminium paint over one coat of red oxide to the M.S clamps & bracket etc complete all as specified and directed..
39Supply & fix sintex box of size 280 x 170 x 130mm Hinged (L) with 2 way connector mounted on epoxy insulators for looping of cable for 1 Phase and 1 neutral fixed on pole with the help of MS nuts, bolts and MS clamps - 02 Nos of size 40mm x 4mm thick with one No MCB SP 6 Amp capacity mounted on din rail inside box including making suitable hole in pole to take out connections to fitting if required at site and provisioning of 1 Sqmm 3.0 Core flexible PVC insulated copper cable from junction box to conector of street light complete all as specified and as directed. Make : Sintex/Hensel or Techno commercial equivalent as given in list of makes. Cat No GS-JB-2817
40Supply & fix sintex box of size 280 x 170 x 130mm Hinged (L) with 2 way connector mounted on epoxy insulators along with MCB TPN 25 Amp for looping of cable for 3 Phase and 1 neutral fixed on pole with the help of MS nuts, bolts and MS clamps - 2 Nos of size 40mm X 4mm thick with one No MCB SP 6 Amp capacity mounted on din rail inside boxincluding making suitable hole in pole to take out connections to fitting if required at site and provisioning of 1 Sqmm 3.0 Core flexible PVC insulated copper cable from junction box to conector of street light complete all as specified and as directed. Make : Sintex/Hensel or Techno commercial equivalent as given in list of makes. Cat No GS-JB-2817
41M & L Cable route indicator of size 100mm dia embossed as LT round shaped 10mm thick with marking of 1.1 KV, LT welded bolted on angle iron of 25 x 25 of 60cm length grouted in PCC (1:3:6) type C-2 using block size of 150 x 150 x 150mm embedded in ground including not exceeding earth work complete all as specified and directed.
42Cable route indicator of size 100mm dia embossed as HT round shaped 10mm thick with marking of 11 KV, LT welded bolted on angle iron of 25 x 25 of 60cm length grouted in PCC (1:3:6) type C-2 using block size of 150 x 150 x 150mm embedded in ground including not exceeding earth work complete all as specified and directed.
43SUMMER APPLIANCES Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 Volt to 250 Volt with output voltage stabilized at 230 Volt with accuracy of ± 2.5% and of capacity 4 KVA complete all as specified and directed. Make :- Servo or Equivalant as given in Appdx 'C' list of makes
44Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 Volt to 250 Volt with output voltage stabilized at 230 Volt with accuracy of ± 2.5% and of capacity 1 KVA complete all as specified and directed. Make :- Servo or Equivalant as given in Appdx 'C' list of makes
45Supply and fix Refrigerator, electric driven (single phase), capacity 190/195 Litres, BEE, 5 Star rated, all as specified and directed. Make :- Voltas / LG / Samsung / Godrej Please Enable Macros to View BoQ information
46Supply and fix Refrigerator, electric driven (single phase), capacity 190/195 Litres, BEE, 5 Star rated, all as specified and directed. Make :- Voltas / LG / Samsung / Godrej Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 57858298
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 10.40 Crore
LAST DATE 30-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Provision Of Otm Accn For Certain Unit At Jaisalmer Mil Station
Basic Detail
Tender No 800626/JSLR/E8
Bidding Type Tender
Location
City Jaisalmer
State Rajasthan
Key Dates
Publish Date 08 Nov 2026
Submission Date 30 Nov 2026
Open Date 08 Dec 2026
Finance
Tender Value 10.40 Crore
Tender Fee 3000
EMD 8.45 Lakhs
Exemption Available
Document List
800626tender.pdf
864d588c-ab6f-4d1a-88f9-d9d40e5b6818.html
BOQ_888389.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 08, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Oct 24, 2026
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Completed
Oct 24, 2026
18:00 IST

Corrigendum-2 Issued

Clarifications on tender conditions and amendments issued.

Completed
Oct 24, 2026
18:00 IST

Corrigendum-3 Issued

Clarifications on tender conditions and amendments issued.

Completed
Oct 24, 2026
18:00 IST

Corrigendum-4 Issued

Clarifications on tender conditions and amendments issued.

Completed
Oct 24, 2026
18:00 IST

Corrigendum-5 Issued

Clarifications on tender conditions and amendments issued.

Completed
Oct 24, 2026
18:00 IST

Corrigendum-6 Issued

Clarifications on tender conditions and amendments issued.

Completed
Oct 24, 2026
18:00 IST

Corrigendum-7 Issued

Clarifications on tender conditions and amendments issued.

Completed
Oct 24, 2026
18:00 IST

Corrigendum-8 Issued

Clarifications on tender conditions and amendments issued.

Completed
Nov 07, 2026
18:00 IST

Corrigendum-9 Issued

Clarifications on tender conditions and amendments issued.

Completed
Nov 16, 2026
18:00 IST

Corrigendum-10 Issued

Clarifications on tender conditions and amendments issued.

Upcoming · 4 days
Nov 30, 2026
18:00 IST

Corrigendum-11 Issued

Clarifications on tender conditions and amendments issued.

Upcoming · 18 days
Nov 30, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 18 days
Dec 08, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 26 days

Tender Documents

Download All (ZIP) ↓
pdf

800626tender.pdf

html

864d588c-ab6f-4d1a-88f9-d9d40e5b6818.html

xls

BOQ_888389.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender