Tender For Repair/Maintenance To Sewage Line, Manholes, Septic Tanks And Misc Work At Adm Regt, Mh, Asc Unit, Mes, Hq Army Ad College, Kurukshetra Trg Area, Ad Static Wks, Offrs Mess Of Zone A Area And Other Misc Work Under Ge (I) Gos
Tender Value
Ref. Documents
Estimated cost
Bid Submission
26 Oct 2026
8 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ganjam → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maintenance To Sewage Line, Manholes, Septic Tanks And Misc Work At Adm Regt, Mh, Asc Unit, Mes, Hq Army Ad College, Kurukshetra Trg Area, Ad Static Wks, Offrs Mess Of Zone A Area And Other Misc Work Under Ge (I) Gos
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 15-Oct-2026 | AMENDMENT | Other | 26-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete un reinforced in ground floor and paving n exc 15cm thick (below or above ground level) complete all as specified and directed. |
| 2 | M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed. |
| 3 | M&L for PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in surface channels and drains complete all as specified and directed. |
| 4 | M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in lintels upto 1.5 m clear span, coping, benching, bed block, lintel band, plinth courses etc and similar work including weathering,slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed. |
| 5 | M&L for 100 mm thick Cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base complete all as specified and directed. |
| 6 | M&L for 100mm thick PCC 1:2:4 Type B-1 using 20mm graded stone aggregate in pavement/hard-standing laid in alternative panels, surface finished even and smooth with using extra cement, including necessary form work, complete all as specified and directed. |
| 7 | M/L hard core gauge n.exc 63 mm deposited spread & levelled in layars n exc 15 cm thick watered & rammed in a true surface using broken stone or boulder . |
| 8 | Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 9 | M&L for walling of squared rubble, regular coursed, well bonded, bedded and solidly hearted built in cement mortar 1:6 complete all as specified and directed. |
| 10 | M&L old size Brick work using fly ash bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed. |
| 11 | M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surface of wall and to be finished even and smooth with out using extra cement complete with water proofing compound @ 3% by wt. of cement all as specified and directed |
| 12 | M&L for rendering 15mm thick in CM 1:4 on other than fair faces of brick work or concrete surface of wall and to be finished even and smooth with out using extra cement complete all as specified and directed |
| 13 | Supply only integral water proofing compound all as specified and directed. |
| 14 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for and removal of rubbish from site complete all as specified and directed |
| 15 | M&L for Precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in CM 1:4 complete all as specified and directed. |
| 16 | Providing reinforced cement concrete type B-l, 1:2:4 (20 mm graded aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area n exc 100 sq. cm, with or without chamfered angles and flat, splayed, rounded or mitred tops as directed and fixed |
| 17 | M&L for reinforced cement concrete type B-l, 1:2:4 (20 mm graded aggregate) as in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilaster and buttresses complete |
| 18 | M&L for Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter |
| 19 | Dismantling fencing wire mesh any size or type,and removing the site complete all speciified and directed |
| 20 | Supply only PVC coated chain link of 3.16mm dia mild steel galvanised fencing of mesh size 75 mmx 75mm as per IS : 2721-2003 weight n exc 4.00 kg per sqm in including binding wire etc fixed to any type of standards posts ,complete all as specified and as directed. |
| 21 | Fixing only chain link fencing including line wires, any mesh size and type of to any type of standards, rails, straining bolts etc including provision 10mm dia MS bars as line wire welded to fencing posts and MS flat iron for fixing fencing wire mesh including taking down existing fencing complete all as specified and as directed.Note : supply only chain link mesh and 10mm dia round bars shall be measured and paid vide relevent item. However, labour aspect for fixing is deemed to be included in this item. |
| 22 | S&F Flat Iron strip 40 mm x 6 mm for securing chain link fencing with RCC posts incl drilling holes, notching for wire etc. for inserting bolts incl all necessary drilling, bolting or riveting etc. complete |
| 23 | S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) |
| 24 | M&L TMT bar 10 mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 25 | Demolition and breaking up drain pipe (salt glazed ware, AC or reinforced concrete ) set in cement mortor for 150 mm internal dia of pipe complete all as specified and directed. |
| 26 | M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors of 150 mm bore of pipe etc complete all as specified and directed. |
| 27 | S & F ultra plus PE, DWC ( Double Wall corrugated ) pipes confirming IS-16098 Part - 2 : 2013 pertaining structured wall plastics pining system for Non - pressure drainage and sewerage 150 mm bore pipe and fittings with non smooth surface, type B complete all as specified and directed. |
| 28 | S&F in repair RCC NP3 pipe laid and joineted ,with coollar 150 mm dia complete all as specified and directed by Engr-in-Charage. |
| 29 | Demolition and breaking up drain pipe (salt glazed ware, AC or reinforced concrete ) set in cement mortor for 200 mm internal dia of pipe complete all as specified and directed. |
| 30 | S & F ultra plus PE, DWC ( Double Wall corrugated ) pipes confirming IS-16098 Part - 2 : 2013 pertaining structured wall plastics pining system for Non - pressure drainage and sewerage 200 mm bore pipe and fittings with non smooth surface, type B complete all as specified and directed. |
| 31 | S&F in repair RCC NP3 pipe laid and joineted ,with coollar 200 mm dia complete all as specified and directed by Engr-in-Charge. |
| 32 | M&L for cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 150 mm bore of pipe with cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate complete all as specified and directed. |
| 33 | M&L for cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 200 mm bore of pipe with cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate complete all as specified and directed. |
| 34 | Comprehensive maintenance of sewage line, Manholes, of various diameter and depth and floor/Nahani gully traps water closet of various size in buildings located with the following :- (a) Cleaning and removal of blockage/clogging in sewer lines including rodding by manual/machineries. (b) -ditto- all as per item 34(a) hereinbefore but in manholes. (c) -ditto- all as per item 34(a) hereinbefore but in floor/Nahani/Gully traps. (d) Removal of blockage/clogging in all water closets. (e) Removal of sludge obtained from Item Ser No 34(a) to 34(d) shall be properly removed to a pit and filled up with earth and spraying of lime as directed by Engineer-in-Charge. Notes (i) The unit rate quoted by the tenderer is inclusive of requirement of number of persons for attending day to day maintenance of sewer lines and manholes etc. The requirement shall be assessed by the tenderer and accordingly the unit rates shall be arrived at. No extra cost whatsoever shall be admissible on this account. (f) The following areas of unit shall be maintained by the contractor under the item 34 (g) to (h) mentioned above:- (g) All OTM Accn of Adm Regt, MH, ASC unit, MES, HQ Army AD College, Kurukshetra Trg Area, AD Static Wks, Offrs Mess MH, Dental, Takshashila, ARO, Stn HQ, Postal Unit, Stn Offrs Mess, of Zone 'A' Area etc. all as directed by Engr-In-Charge at GMS under AGE B/R-I. (h) The contractor shall provide the sufficient number(Minimum two) of labourers for the above works and they should report daily in the morning at 08.30 AM to AGE B/R-I office to cleaning and moping the offices and sweeping of AGE B/R-I area thereafter receive complain slip for rectification of complain whichever is as under the item No 34 (a) to (j) in case the contractor failed to complete the complaint given within two days from the date of receiving complaint slip, a penalty of Rs 1500/- per day shall be recovered from the contractor. |
| 35 | (j) The contractor shall providing and engaging minimum two (02) persons for keeping fully smooth functional of the sewage lines/sewage system etc. and any type of blockages by manually or through pumping or mechanical sucker/modified tractor etc and keeping area clean, neat and tidy with use of brooms, Harpic, Pheniol etc and T&P throughout the day i.e from 0830hrs to 1700hrs complete all as specified and all as directed. Note:- (i) Period of maintaining the sewage line starts after the date of physically completion of the work. Entire work shall be carried out in the areas under AGE B/R-I for All OTM Accn of Adm Regt, MH, ASC unit, MES, HQ Army AD College, Kurukshetra Trg Area, AD Static Wks, Offrs Mess MH, Dental, Takshashila, ARO, Stn HQ, Postal Unit, Stn Offrs Mess, of Zone 'A' Area etc. or other units as and when required basis at Gopalpur Mil Stn and all as directed by Engr-In-Charge Note- (i) Rate quoted above shall be deemed to including the cost of adequate T&P equipment, safety devices etc to full fill the requirment to the satisfaction of Engr-in-Charge Note (ii) The pump/mechanical sucker and all other necessary requirement at site for cleaning the same will be provided by the contractor without any extra cost on this ground Note (iii) The personnel engaged under this item will be available/report to office of AGE B/R-I at 0830 hrs to receive complaint slip for rectification of complaint whichever is as under the item No 34 (a) to (j) in case the contractor failed to complete the complaint given within two days from the date of receiving complaint slip, a penalty of Rs 1500/- per day shall be recovered from the contractor Note (iv) If the persons are found absent, no payment will be made for that calendar days and In addition a penal recovery will be made double the rate quoted against the day.Note (v) Any dispute related to above shall be discussed with accepting officer and his decission shall be final Note (vi) Comprehensive maintenance of sewage line, Manholes, of various diameter and depth and floor/Nahani/ gully traps water closet of various size in buildings located as above. |
| 36 | M&L for removing of sludge from septic tanks using vehicle mounted sewer suction machine (Honey sucker) or through mechanically operated jetting system including disposal of liquid/solid content in all respect and removing the sludge to distance not exceeding 500 mtrs and burried in to the ground and making to a true surface and covering with loose soil and as directed by Engr-In-Charge(The rate included excavation and filling ) |
| 37 | Excavation in trenches not exceeding 1.5m wide and depth not exc. 1.5m for foundation etc or for shafts, wells cesspits manholes pier holes etc not exceeding 10 Sqm on plan and not exceeding 1.5 m depth in soft /loose soil etc complete all as specified and directed |
| 38 | Excavation in trenches not exceeding 1.5m wide and depth exc.1.5 m but not exc. 3.0 m for foundation etc or for shafts, wells cesspits manholes pier holes etc not exceeding 10 Sqm on plan and in soft /loose soil etc complete all as specified and directed |
| 39 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in any type of soil etc complete all as specified and directed |
| 40 | Removal of excavated materials not exc. 50 m and depositing where directed complete all as specified and directed |
| 41 | M&L Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc complete all as specified and directed. |
| 42 | M&L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished ,and reforming benching as required for 150 mm internal dia of pipe complete all as specified and directed. |
| 43 | Providing and laying 60mm thick machine pressed precast concrete interlocking paver block of M-30 grade pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, and including 50mm thick compacted bed of fine sand,compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified. |
| 44 | Providing and laying 60mm thick factory made chamfered edge cement concrete prepolished interlocking paver block of M-30 grade with approved colour,design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand,compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified. |
| 45 | Providing and laying 80mm thick factory made chamfered edge cement concrete prepolished interlocking paver block of M-35 grade with approved colour,design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand,compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified. |
| 46 | M&L for chequered cement concrete tiles of size 200 mm x 200 mm x 25 mm thick set jointed and pointed in neat cement slurry in floor with no grey cement and pigment, including 20 mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 47 | M&L for prepolished chequered cement concrete tiles of size 200 mm x 200 mm x 25 mm thick set jointed and pointed in neat cement slurry in floor and cut and polished with grey cement and pigment, including 20 mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 48 | Taking down chowkhat or frames n exc 1.50 Sqm each with shutters (without taking off shutters from the frame) and removing to or from store complete all as specified and directed |
| 49 | Taking down chowkhat or frames exc 1.50 Sqm and n exc 4 Sqm each with shutters (without taking off shutters from the frame) and removing to or from store complete all as specified and directed |
| 50 | S & F for solid PVC door frame of size 50x47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplied and fixing in opening as specified and shown on drawing made on section 8 of SSR 2010 Part-II complete all as specified and directed |
| 51 | S & F factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC “C” channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, S & F in the frame as per specifications and complete all as specified and directed |
| 52 | S&F 100 mm long butt hinges extruded aluminium alloy with galvanised mild steel hinge pin anodised type B-21 complete all as specified and directed. |
| 53 | S&F 150 mm size extruded aluminium alloy handles fabricated type anodised of complete all as specified and directed. |
| 54 | S&F 150 mm long aluminium,anodised, barrel tower bolts of extruded section complete all as specified and directed. |
| 55 | S&F in repair 100 mm long butt hinges extruded aluminium alloy with galvanised mild steel hinge pin anodised type B-21 complete all as specified and directed. |
| 56 | S&F in repair 150 mm size extruded aluminium alloy handles fabricated type anodised of complete all as specified and directed. |
| 57 | S&F in repair 150 mm long aluminium,anodised, barrel tower bolts of extruded section complete all as specified and directed. |
| 58 | S&F in repair 300 mm long aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 59 | S & F in repair bevelled edge Looking mirror of any size without frame of selected quality glass mounted on wall with chromium plated stainless screws complete all as specified and directed |
| 60 | S&F in repair brass shower rose 125 mm dia any type fixed to plugs with chromium plated brass screws complete all as specified and directed |
| 61 | S&F as in repair glass shelf assembly consisting of 5.5mm thick sheet 12cm wide with chromium plated bracket guard railing 60cm long complete all as specified and directed |
| 62 | S&F as in repair cornner glass shelf of size 9\\"*9\\" shelf and frond,circle in design fixed over chromium plated brackets of heavy duty with frond linings with glass fixed in wall with necessary screws complete all as specified and directed. |
| 63 | S & F in repair LDPE waste pipe for WHB, sink, urinal etc. pipes of pressure rating 6 kgf/sq. cm complete. |
| 64 | S & F in repair HDPE waste pipe 32 mm dia for EWC,Flushing cistern etc. pipes of pressure rating 6 kgf/sq. cm complete. |
| 65 | S & F in repair 32mm dia Bottle trap of PTMT having minimum water seal of 25 mm all as spd. |
| 66 | S&F in repairs PVC connection 15mm size with PTMT nuts, of 450mm length complete all as specified and directed. |
| 67 | S & F in repair 32mm dia bore Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc.with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed as in repairs |
| 68 | Demolition and breaking up drain pipe (salt glazed ware, AC or reinforced concrete,PVC ) set in cement mortor for any size & type complete all as specified and directed. |
| 69 | M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls or in floors of 75 mm bore of pipe etc complete all as specified and directed. |
| 70 | M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints,fixed to walls or in floors of 110 mm bore of pipe etc complete all as specified and directed. |
| 71 | S&F PVC (SWR) bends any radius of 75 mm bore with out access door complete all as specified and directed. |
| 72 | S&F PVC (SWR) bends any radius of 110 mm bore with out access door complete all as specified and directed. |
| 73 | S&F PVC (SWR) bends any radius of 75 mm bore with access door complete all as specified and directed. |
| 74 | S&F PVC (SWR) bends any radius of 110 mm bore with access door complete all as specified and directed. |
| 75 | S&F PVC (SWR) vent cowl 75 mm bore complete all as specified and directed. |
| 76 | S&F PVC (SWR) vent cowl 100 mm bore complete all as specified and directed. |
| 77 | S&F in repair PVC low level flushing cistern (white) 10 Ltrs capacity with inlet, ball valve, float and handle internal fitting, push button operated type with and including brackets etc complete. |
| 78 | S/F in repair CP health faucet with flex pipe and hand shover ,the length of hose 1.50 mtr fitted to the tap.complete all as specified. Make : Shakti, Parryware, hindware or equivalent. |
| 79 | S&F in repairs EWC seat cover of any pattern including cover and Mild steel chromium plated hinging devices of any colour all as specified and directed. Make : Shakti, Parryware, hindware or equivalent. |
| 80 | S&F Iin repair CP Grating doom 75 mm dia with PVC (SWR) nahani/floor trap incl jointing with solvent cement complete all as specified and directed. |
| 81 | S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed. |
| 82 | S & F in repairs Vitreous China urinals, bowl type flat back size of 465 x 355 x 265 mm white (minimum) with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement etc complete all as sapecified and directed. |
| 83 | S&F in repair PVC low level flushing cistern (white) 10 Ltrs capacity with inlet, ball valve, float and handle internal fitting, push button operated type with and including brackets etc complete. |
| 84 | S&F in repair bib tap cast copper alloy chromium plated with crutch or butterfly handle fixed to 15 mm dia GI tube/CPVC pipe all as specified and directed. Make : Shakti, Parryware, hindware or equivalent. |
| 85 | Supplying and laying of 20mm bore dia, CPVC pipes SDR 11 & plain and brass CPVC SDR 11 fittings incl all brass reducers,unions,Tee fixed on walls/ceiling or laid in floors, etc,including cutting chases in bricks wall brass fittings and taking down GI 15mm pipe complete all as specified and directed. |
| 86 | S&F in repair 15 mm fancy type pillar taps chromium plated cast copper alloy with capstan heads screwed down high pressure with or without lettered ‘Hot’ or ‘cold’ with long screwed shanks and fly nuts . |
| 87 | S&F in repair 15 mm fancy type stop valve/angle valve cast copper alloy chromium plated screwed high pressure with crutch or butter fly handle screwed both ends for iron or union and fixed to 15 mm GI tube complete all as specified and directed by Engineer-in-Charge. |
| 88 | S & F in repairs, vitreous china wash basin, white, flat back, size 550x400mm with brackets, inc.cutting for fixing & pinning in ends of brackets complete all as directed by Engr-in-Chrg |
| 89 | M&L for preparation of old distempered surfaces of walls and ceiling and also applying one coat of oil bound distemper on walls all as specified and directed. |
| 90 | Supply and fixing factory made UPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), UPVC extruded glazing beads of appropriate dimension,including Pinhead Glass with thickness of 4mm required for fixing & louvers strips, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc.Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. Note: For UPVC frame, sash and mullion extruded profiles minus 5% tolerance in imension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made and 4mm thick glazing with selected quality glass and including taking down aluminium/wooden/steel/uPVC ventilator (Note: The unit rate quoted by contractor include cost of glass and includes all other connected accessories). |
| 91 | Supply and fixing factory made uPVC white colour casement door with 3D hinges made of (big series) frame 67 x 64 mm & ash 67 x 110 mm both having wall thickness of 2.3+ or - 0.2 mm and sinle glazing bead/double glazing bead of appropriate dimension. (area of ddor up to 2.00 Sqm) comprising of uPVC multi-chambered frame, sash and million (where ever required) ex truded rofiles duly reinforced with 1.60+ or - mm thick galvanied mild steel section made from roll forming process of requied length (shape & size according to UPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, Zinc alloy white powder coated 3D higes and one handle on each side of panels along with zick plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, GI fasterners 100 x 8 size for fixing frame to finished wall and necessary stainless stell screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and draingage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete and including WPC/PVC board as required size and thickness and 4 mm thickness glass and including taking down aluminium/wooden/steel/uPVC door all as secified and directed by Engr-in-Charge. |
| 92 | Supply and fixing factory made UPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. and provided with Clear glass of Saint Gobain / Modiguard make with thickness of 4mm and stainless steel wire cloth of 0.19mm nominal dia. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified. Note: For UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made and 4mm thick glazing with selected quality glass (Note: The unit rate quoted by contractor include cost of glass and includes all other connected accessories and taking down aluminium/wooden/steel/uPVC windows) all as directed by Engr-in-Charge. |
| 93 | S&F in repairs viterious china squatting pan orissa pattern size 580x440mm white integal foot rest including concrete bedding & including P or S trap 100mm complete all as directed by Engr-in-Charge. |
| 94 | S & F in repairs, vitreous china wash down water closet pan (pedestal pattern), white, incl 'P' or 'S' trap and plastic water closet seat, black, closed pattern with flat bottom and cover & MS chromium plated or aluminised hinging device, including seat cover complete all as directed by Engr-in-Charge. |
| 95 | M&L for Non skid ceramic coloured tiles of design as approved by GE 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed in cement mortor 1:6 complete all as specified and directed. |
| 96 | M&L for Non skid ceramic coloured tiles vertical surfaces area of each tile exceeding 0.06 sq m but not exceeding 0.11 sqm as skirting non skid ceramic tiles ncluding 10 mm thick rendering in CM 1:4 complete all as specified and directed. |
| 97 | M&L for anti non skid ceramic coloured tiles matt finish of design as approved by GE 10 mm thick (square) area of each tile size 600mm x 600 mm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 20 mm thick screed bed in cement mortor 1:6 complete all as specified and directed. |
| 98 | M&L for glazed ceramic coloured tiles 350 x 250 x 7 mm / 450 x 350 x 7 mm thick coloured on vertical surface such as dado /skirting / risers to steps etc jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles over and including rendering 10 mm thick in cement mortor 1:4 complete all as specified and directed. |
| 99 | Dismantling of AC/GI plain/Corrugated / semi corrugated roof sheets any type and any size complete all as specified and directed. |
| 100 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified and directed. |
| 101 | Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and as directed by Engineer-in-Charge. |
| 102 | S&F Mild steel work in tubular poles & trusses (framed) including purlins,rafters and special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS-1161-1979 grade St-240 complete all as specified and as directed by Engineer-in-Charge. |
| 103 | S & F steel Fe-410-W (Gde 250 Quality-A) work in tubular stanchion/post including special shaped washer etc. complete using one of more tubes or induction butt welded tubes conforming to IS-1161- 1979 grade St.-240 complete all as specified and directed. |
| 104 | M&L for MS Framed work of Fe 410 W (Gde-E-250) Quality A, as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete |
| 105 | M&L for preparation of new/old or previously untreated surfaces of steel or rollong shutters up to height 12 Mtr of any description, over 10cm in width or girth and apply two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 106 | Excavation in post holes (or similar holes) each n exc. 0.5cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layer n.exc. 25cm complete all as specified |
| 107 | M&L for two coats of white wash on previously untreated new surface of bk wall incl preparation of surface complete |
| 108 | M&L for Preparation of old surfaces of Wall and applying One coat of white wash over old decorated surface of walls all as specified and directed by Engineer-in-Charge. |
| 109 | M&L for Preparation of old surfaces of Wall and applying one coat of Cement Base Paint on walls all as specified and directed by Engineer-in-Charge. |
| 110 | M&L for preparing old plastered surfaces of walls, Facias, cornices etc and apply one coat of weather proof exterior emultion (Make as approved by GE) Complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 15, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 26, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 8 daysOct 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender