Tender For special Repair For Conversion Of Lt Oh Line To Ug Cable And Connected Wks At Meal Det Khaltsi And Convoy Ground & special Repairs For Security Lights And Connected Works At 192 Mtn Bde At Biamah In The Aor Of Age B/R-Ii Under Ge Khumbathan
Tender Value
Ref. Documents
Estimated cost
Bid Submission
23 Oct 2026
14 days left
EMD
73600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kargil → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair For Conversion Of Lt Oh Line To Ug Cable And Connected Wks At Meal Det Khaltsi And Convoy Ground & special Repairs For Security Lights And Connected Works At 192 Mtn Bde At Biamah In The Aor Of Age B/R-Ii Under Ge Khumbathang
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtrs in depth for laying of cables including getting out in hard soil complete all as specified and directed. |
| 2 | Returning filling in including spreading, levelling ,and well ramming, in layers not exceeding 25 cm each layer of any kind of soil. |
| 3 | Removing surplus excavated material from site not exceeding 50 mtrs from starting point and depositing where directed at level not exceeding 1.5 mtr above the starting point. |
| 4 | Supply and laying sand as in cushioning for underground cables laid in trenches with layer of sand 8 cm thick before laying of cable and 15 cm after laying of cable incl spreading, levelling and hand punning complete all as specified and directed .Note: Only punned thickness 18cm shall be measured and paid |
| 5 | Supplying and laying un-reinforced precast concrete cable cover, class LV, Type-1, flat, size 250mm x 150mm x 40mm complete all as specified and directed |
| 6 | Supply and laying under ground XLPE insulated armoured heavy duty electric power cable with aluminium conductor cable 1100 volts grade laid in trenches / passing through GI pipe / on pole / on wall of size 120 sq mm 3.5core complete all as specified . |
| 7 | Supply and laying under ground XLPE insulated armoured heavy duty electric power cable with aluminium conductor cable 1100 volts grade laid in trenches / passing through GI pipe / on pole / on wall of size 95 sq mm 3.5 core complete all as specified . |
| 8 | Supply and laying under ground XLPE insulated armoured heavy duty electric power cable with aluminium conductor cable 1100 volts grade laid in trenches / passing through GI pipe / on pole / on wall of size 70 sq mm 3.5 core complete all as specified . |
| 9 | Supply and laying under ground XLPE insulated armoured heavy duty electric power cable with aluminium conductor cable 1100 volts grade laid in trenches / passing through GI pipe / on pole / on wall of size 50 sq mm 3.5core complete all as specified . |
| 10 | Supply and laying under ground XLPE insulated armoured heavy duty electric power cable with aluminium conductor cable 1100 volts grade laid in trenches / passing through GI pipe / on pole / on wall of size 35 sq mm 3.5core complete all as specified . |
| 11 | Supply and laying under ground XLPE insulated armoured heavy duty electric power cable with aluminium conductor cable 1100 volts grade laid in trenches / passing through GI pipe / on pole / on wall of size 16 sq mm 4core complete all as specified .(for security lights) |
| 12 | Supply and laying under ground XLPE insulated armoured heavy duty electric power cable with aluminium conductor cable 1100 volts grade laid in trenches / passing through GI pipe / on pole / on wall of size 16 sq mm 2core complete all as specified . |
| 13 | Supply and laying under ground XLPE insulated armoured heavy duty electric power cable with aluminium conductor cable 1100 volts grade laid in trenches / passing through GI pipe / on pole / on wall of size 10 sq mm 2core complete all as specified . |
| 14 | Supply and laying under ground XLPE insulated armoured heavy duty electric power cable with aluminium conductor cable 1100 volts grade laid in trenches / passing through GI pipe / on pole / on wall of size 06 sq mm 2core complete all as specified . |
| 15 | Supply and fixing in replacement of G I tubing 80 mm dia light grade galvanised with all fitting and fixed fix on wall ceiling or laid in floors complete all as specified and directed at site . ( for cable protection ) |
| 16 | Supply and fixing in replacement of G I tubing 50 mm dia light grade galvanised with all fitting and fixed fix on wall ceiling or laid in floors complete all as specified and directed at site . ( for cable protection ) |
| 17 | Dismantling of ACSR conductor from steel tubular pole complete all as specified and directed. |
| 18 | Dismantling of insulator any type from pole complete all as specified and directed. |
| 19 | Dismantling of cross arms any size complete all as specified and directed. |
| 20 | Taking down old Unserviceable security light fitting/flood light any size complete all as specified and directed . |
| 21 | S&F LED security light fitting 60 watts made of pressure diecast aluminium housing with acrylic cover as diffuser with IP65 and IK -07 protection , THD<10%, lumen output >= 110 lumen per watts with integrated electronic driver incl copper connecting wire three core of suitable size up to connector of ceiling rose complete all as specified and directed. |
| 22 | S&F LED flood light 100 watt 230 volts AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp and making necessary connections complete all as specified and directed. |
| 23 | S&F in replacing GI mounting pipe of building security lights of size 32 mm to 40 mm size upto 1.2 mtr length bend into sizes incl mounting clamps made of MS flat saddles, nut bolt and washers all as specified and directed . |
| 24 | S & f in replacement PVC insulated stranded copper conductor FRLS 1.5 sqmm for connection from pole junction box to connector of street light fitting complete all including taking down all as specified and directed.( For street light jn box to connector) |
| 25 | S&F in repairs Bollard 20 watts fully aluminium cast body finished with poly urethane paint ( with prior treatment ) of length 647 mm and circular base dimeter of leg of bollard 76 mmsurrounded with fully cast aluminium body finished with polyurethane paint with acrylic diffuser with B 22 base for fixing warm white/milky white LED bulb . Total length of bollard fitting 1181 mm complete all as specified and directed .Model No MBL-D-002 of make Mepro electricals / equivalent make of Crompton/Bajaj |
| 26 | Taking down old Unserviceable LT pole for security light fitting/flood light for replacing it with architectural lights incl necessary excavation , breaking of PCC complete all as specified and directed. |
| 27 | S&F cast aluminium heavy pole designer leg and broader designer base with broader plate 422MM x 422 MM finished with polyurethane paint(with prior treatments) Max diameter of one leg at middle is approx. 65 mm and at edges is approx. 75 mm. Outer dia for spigot entry 60 MM . 03 Nos T shaped bolts with nuts & washers provided for concrete foundation. Total length of the pole including base and legs (base with plate x03 nos legs) is 2515 MM (8 feet 3 inches) complete all as specified and directed by Engineer in Charge Model No MCPL-02 of make Mepro electricals / equivalent in Crompton/Bajaj |
| 28 | Supply and fix fully cast aluminium finished with polyurethane paint ( with prior treatment ) square junction with max projection breadth of 950 MM suitable for 02 nos and three nos post top lantern for 2.5 meter and 3 meter pole. Model No of square junction is CDPB04 of mepro electricals or its equivalent / Bajaj/Crompton |
| 29 | M&L for post top lantern fully cast-iron body finished with polyurethane paint (with prior treatment) with acrylic window cover with total length 606 mm and Max breadth 330 mm with B22 brass holder provided with aluminium cover for fixing in architectural pole. Spigot entry 78 mm as per IS 10322 part-5 section 1 latest 2017 suitable for 20 to 40 W LED bulb complete all as specified and directed. Model No of post top: PTL-003 of mepro electricals or its equivalent / Bajaj/Crompton |
| 30 | M&L for post top lantern fully cast iron body finished with polyurethane paint ( with prior treatment ) with acrylic window cover with total length 434 mm and Max breadth 234 mm with B22 brass holder provided with aluminium cover for fixing in architectural pole . Spigot entry 62 mm as per IS 10322 part-5 section 1 latest 2017 suitable for 05 to 15 W LED bulb complete all as specified and directed. Model No of post top: PTL-03 of mepro electricals or its equivalent / Bajaj/Crompton |
| 31 | M&L for shifting of LT steel tubular swaged pole 09 Mtr pole by breaking the coping, PCC foundation, securing the pole with rope for safety, shifting the pole from existing location to another location as directed incl refixing the same in new suitable location all as specified and directed. Note: Rate for excavation, earth work, foundation PCC, coping incl all tools and tackles will deemed be included in the unit rate |
| 32 | Supply installing, testing and commissioning of LT Panel outdoor kiosk type double door factory made of angle iron 65mmx 65mmx 6mm on all side welded to 3.15 mm thick CRCA sheet steel for outer compartment and 2.0 mm thick for inner compartment with openable shutteron both sides ( front and rear) , having locking arrangement totally enclosed weather proof outdoor spray painted internally and externally with two coats of synthetic enamel paint over a coat of primer suitable for 440 volts, 3 phase, 4 wire, 50 Hz with Aluminium bas bar of capacity 200 Amps AC supply, electrically connected as per norms and fitted with following accessories all as specified and directed by the Engr-in Charge. (Note:- LT panel shall be mounted on PCC 1:2:4 type B-1 with 20 mm graded stone aggregate foundation block of suitable size upto 40 cm above ground level as directed. The cost of the PCC block shall be deemed to be included in the unit rate quoted for the item & width of the panel not less than 75 cm) . The panels shall be of CPRI approved. ( LT Panel No 2)(a) Before bring the matirial at site. The contractor shall submit the product approval certificate from MES alongwith CPRI approved certificate for our approval of make (b) Contractor shall submit the drg of LT panel for approval by GE before execution at site.INCOMMER Incoming MCCB, 415V, 4 pole, 400 Amps, 36 KA, Ics =100% IcuIndicator Lamp-01 Set (Set of three)Voltmeter 0-500 Volt , 415V , 50 Hz ,with selector switches -01 setAmmeter 0- 500 Amps with CTs, 415V 50 Hz with selector switches -01 setOUTGOINGMCCB, 415V, 4 pole, 250 Amps, 25 KA -01 No MCCB 4 pole 200 amp, 415V, 36 KA, 4 pole , 01NosMCCB 4 pole 63 amp, 415V, 16 KA, 4 pole , 01 Nos MCB SPN 40 Amps , 230V, 50 Hz - 01 Nos |
| 33 | Supply installing, testing and commissioning of LT Panel outdoor kiosk type double door factory made of angle iron 65mmx 65mmx 6mm on all side welded to 3.15 mm thick CRCA sheet steel for outer compartment and 2.0 mm thick for inner compartment with openable shutteron both sides ( front and rear) , having locking arrangement totally enclosed weather proof outdoor spray painted internally and externally with two coats of synthetic enamel paint over a coat of primer suitable for 440 volts, 3 phase, 4 wire, 50 Hz with Aluminium bas bar of capacity 200 Amps AC supply, electrically connected as per norms and fitted with following accessories all as specified and directed by the Engr-in Charge. (Note:- LT panel shall be mounted on PCC 1:2:4 type B-1 with 20 mm graded stone aggregate foundation block of suitable size upto 40 cm above ground level as directed. The cost of the PCC block shall be deemed to be included in the unit rate quoted for the item & width of the panel not less than 75 cm) . The panels shall be of CPRI approved. ( LT Panel No 2)(a) Before bring the matirial at site. The contractor shall submit the product approval certificate from MES alongwith CPRI approved certificate for our approval of make (b) Contractor shall submit the drg of LT panel for approval by GE before execution at site.INCOMMER Incoming MCCB, 415V, 4 pole, 400 Amps, 36 KA, Ics =100% IcuIndicator Lamp-01 Set (Set of three)Voltmeter 0-500 Volt , 415V , 50 Hz ,with selector switches -01 setAmmeter 0- 500 Amps with CTs, 415V 50 Hz with selector switches -01 setOUTGOINGMCCB, 415V, 4 pole, 250 Amps, 25 KA -01 No MCCB 4 pole 200 amp, 415V, 36 KA, 4 pole , 01NosMCCB 4 pole 63 amp, 415V, 16 KA, 4 pole , 01 Nos MCB SPN 40 Amps , 230V, 50 Hz - 01 Nos |
| 34 | Supply installing, testing and commissioning of LT Panel outdoor kiosk type double door factory made of angle iron 65mmx 65mmx 6mm on all side welded to 3.15 mm thick CRCA sheet steel for outer compartment and 2.0 mm thick for inner compartment with openable shutteron both sides ( front and rear) , having locking arrangement totally enclosed weather proof outdoor spray painted internally and externally with two coats of synthetic enamel paint over a coat of primer suitable for 440 volts, 3 phase, 4 wire, 50 Hz with Aluminium bas bar of capacity 150 Amps AC supply, electrically connected as per norms and fitted with following accessories all as specified and directed by the Engr-in Charge. (Note:- LT panel shall be mounted on PCC 1:2:4 type B-1 with 20 mm graded stone aggregate foundation block of suitable size upto 40 cm above ground level as directed. The cost of the PCC block shall be deemed to be included in the unit rate quoted for the item & width of the panel not less than 75 cm) . The panels shall be of CPRI approved (LT Panel No 03 , 04 & 05) (a) Before bring the matirial at site. The contractor shall submit the product approval certificate from MES alongwith CPRI approved certificate for our approval of make (b) Contractor shall submit the drg of LT panel for approval by GE before execution at site.INCOMMER Incoming MCCB, 415V, 4 pole, 400 Amps, 36 KA, Ics =100% IcuIndicator Lamp-01 Set (Set of three)Voltmeter 0-500 Volt , 415V , 50 Hz ,with selector switches -01 setAmmeter 0- 500 Amps with CTs, 415V 50 Hz with selector switches -01 setOUTGOINGMCCB, 415V, 4 pole, 250 Amps, 25 KA -01 No MCCB 4 pole 200 amp, 415V, 36 KA, 4 pole , 01NosMCCB 4 pole 63 amp, 415V, 16 KA, 4 pole , 01 Nos MCB SPN 40 Amps , 230V, 50 Hz - 01 Nos |
| 35 | Supply installing, testing and commissioning of Bus bar junction box panel (Appx. Size 0.75 x 0.6 x 0.3 Mtr)outdoor kiosk type factory made of angle iron 65mmx 65mmx 6mm on all side welded to 3.15 mm thick CRCA sheet steel for outer compartment and 2.0 mm thick for inner compartment with openable shutteron both sides ( front and rear) , having locking arrangement totally enclosed weather proof outdoor spray painted internally and externally with two coats of synthetic enamel paint over a coat of primer suitable for 440 volts, 3 phase, 4 wire, 50 Hz with Aluminium bas bar of capacity 250 Amps AC supply, electrically connected as per norms and fitted with following accessories all as specified and directed by the Engr-in Charge. (Note:- Bus bar junction box shall be mounted on PCC 1:2:4 type B-1 with 20 mm graded stone aggregate foundation block of suitable size upto 40 cm above ground level as directed. The cost of the PCC block shall be deemed to be included in the unit rate quoted Note : (a) Before bring the matirial at site. The contractor shall submit the product approval certificate from MES alongwith CPRI approved certificate for our approval of make (b) Contractor shall submit the drg of LT panel/ bus bar for approval by GE before execution at site.INCOMMER/OUT GOINGIncoming MCCB, 415V, 4 pole, 400 Amps, 36 KA, Ics =100% Icu -01 nosIndicator Lamp-01 Set (Set of three) |
| 36 | Supply installing, testing and commissioning of Bus bar junction box panel (Appx. Size 0.75 x 0.6 x 0.3 Mtr)outdoor kiosk type factory made of angle iron 65mmx 65mmx 6mm on all side welded to 3.15 mm thick CRCA sheet steel for outer compartment and 2.0 mm thick for inner compartment with openable shutteron both sides ( front and rear) , having locking arrangement totally enclosed weather proof outdoor spray painted internally and externally with two coats of synthetic enamel paint over a coat of primer suitable for 440 volts, 3 phase, 4 wire, 50 Hz with Aluminium bas bar of capacity 100 Amps AC supply, electrically connected as per norms and fitted with following accessories all as specified and directed by the Engr-in Charge. (Note:- Bus bar junction box shall be mounted on PCC 1:2:4 type B-1 with 20 mm graded stone aggregate foundation block of suitable size upto 40 cm above ground level as directed. The cost of the PCC block shall be deemed to be included in the unit rate quoted ( B/B panel No 2 for LT distribution )Note : (a) Before bring the matirial at site. The contractor shall submit the product approval certificate from MES alongwith CPRI approved certificate for our approval of make (b) Contractor shall submit the drg of LT panel/ bus bar for approval by GE before execution at site.INCOMMER/OUT GOINGIncoming MCCB, 415V, 4 pole, 400 Amps, 36 KA, Ics =100% Icu -01 nosIndicator Lamp-01 Set (Set of three) |
| 37 | M&L plain cement concrete ratio 1:3:6 type C2 using 40 mm graded stone aggregate as in foundation filling andf mass concrete for stay/pole foundation complete incl necessary form work all as specified and directed. |
| 38 | M&L plain cement concrete ratio 1:2:4 type B1 using 20 mm graded stone aggregate as in foundation filling andf mass concrete for coping including necessary form work complete all as specified and directed. |
| 39 | M&L plain cement concrete ratio 1:4:8 type B2 using 40 mm graded stone aggregate as in foundation filling andf mass concrete for base (bottom of pit of bed concerete) incl necessary form work complete all as specified and directed. |
| 40 | S&F in replacing FRP junction box for security lights and size not less than 300x200x120 mm ( cable entry size upto 25 sqmm 4 core ) , IP 66 protection water proof and temperature resistant .The junction box comprises of DIN rail and terminal for 3 phase with 01 Nos MCB SP 6 Amps 'C' curve with mounting clamps made out of 02 x MS flat 40x4 mm size with nut bolt and washers complete all as specified and directed. |
| 41 | Earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 Mtr below normal ground level connected to and including galvanised iron strip 25X4 mm as earthing lead by means of bolts, nuts, check nuts & washers etc made of GI and connected to earthing test point all as shown in electrical plate No. 3 of SSR Part I of 2009.00 & as specified or indicated and testing on completion including exaction/earth work in any type of strata PCC ( 1:3:6 ) type C1 earthing chamber, pre cast slab 50 mm thick in cement concrete ( 1: 2 : 4 ) type B 1 ( reinforced with welded steel wire fabric (XPM) weight not less than 4 Kg / Sqm), funnel with wire mesh, I watering pipe of 20 mm bore medium grade and lugs, including galvanised iron strip 25X4 mm with GI protection pipe of 40 mm medium grade 7.5 meter long, etc complete all as specified.( 02x earthing for LT panel and 01x earthing for Bus bar panel) |
| 42 | Supply and laying double walled corrugated HDPE pipe of size63 mm inner dia as per IS 16205 , anti termite, anti rodency ,non flame propagation property etc for protection of LT cables complete all as specified and directed. |
| 43 | M&L for taking out old /usnv LT XLPE cables any size complete all as specified and directed.Note : Excavation and earth work will be measured and paid as per relevant item of this schedule |
| 44 | M&L for replacing 3 core copper flexible cable 2.5 sqmm PVC sheathed FRLS complete all as specified and directed .( for flood lights and bollards lights) |
| 45 | Deduct Credit for Demolished/Dismantled material Rs (-) 88531.00 (Minus) as listed in Schedule 'A' Part-II (Credit Schedule)Note : Tenderers will not quote against this item being a tentative amount, to be considered to arrive at the 'Contract Sum'. Please Enable Macros to View BoQ information |
| 46 | Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtrs in depth for laying of cables including getting out in hard soil complete all as specified and directed. (cable shall be laid 60 cm below ground level ) |
| 47 | Returning filling in including spreading, levelling ,and well ramming, in layers not exceeding 25 cm each layer of any kind of soil. |
| 48 | Removing surplus excavated material from site not exceeding 50 mtrs from starting point and depositing where directed at level not exceeding 1.5 mtr above the starting point. |
| 49 | Supply and laying sand as in cushioning for underground cables laid in trenches with layer of sand 8 cm thick before laying of cable and 15 cem after laying of cable incl spreading, levelling and hand punning complete all as specified and directed .Note: Only punned thickness 18cm shall be measured and paid |
| 50 | Supplying and laying un-reinforced precast concrete cable cover, class LV, Type-1, flat, size 250mm x 150mm x 40mm complete all as specified and directed |
| 51 | Supply and fixing under ground XLPE insulated armoured heavy duty electric cable with aluminium conductor cable 1100 volts grade laid in trenches / passing through GI pipe / on pole / on wall of size 120 sq mm 3.5core complete all as specified . |
| 52 | Supply and fixing under ground XLPE insulated armoured heavy duty electric cable with aluminium conductor cable 1100 volts grade laid in trenches / passing through GI pipe / on pole / on wall of size 95 sq mm 3.5 core complete all as specified . |
| 53 | Supply and fixing under ground XLPE insulated armoured heavy duty electric cable with aluminium conductor cable 1100 volts grade laid in trenches / passing through GI pipe / on pole / on wall of size 70 sq mm 3.5 core complete all as specified . |
| 54 | Supply and fixing under ground XLPE insulated armoured heavy duty electric cable with aluminium conductor cable 1100 volts grade laid in trenches / passing through GI pipe / on pole / on wall of size 50 sq mm 3.5core complete all as specified . |
| 55 | Supply and fixing under ground XLPE insulated armoured heavy duty electric cable with aluminium conductor cable 1100 volts grade laid in trenches / passing through GI pipe / on pole / on wall of size 35 sq mm 3.5core complete all as specified . |
| 56 | Supply and fixing under ground XLPE insulated armoured heavy duty electric cable with aluminium conductor cable 1100 volts grade laid in trenches / passing through GI pipe / on pole / on wall of size 16 sq mm 4core complete all as specified .(for security lights) |
| 57 | Supply and fixing under ground XLPE insulated armoured heavy duty electric cable with aluminium conductor cable 1100 volts grade laid in trenches / passing through GI pipe / on pole / on wall of size 16 sq mm 2core complete all as specified . |
| 58 | Supply and fixing under ground XLPE insulated armoured heavy duty electric cable with aluminium conductor cable 1100 volts grade laid in trenches / passing through GI pipe / on pole / on wall of size 10 sq mm 2core complete all as specified . |
| 59 | Supply and fixing under ground XLPE insulated armoured heavy duty electric cable with aluminium conductor cable 1100 volts grade laid in trenches / passing through GI pipe / on pole / on wall of size 06 sq mm 2core complete all as specified . |
| 60 | Supply and fixing in replace G I tubing 80 mm dia light grade galvanised with all fitting and fixed fix on wall ceiling or laid in floors complete all as specified and directed at site . ( for cable protection ) |
| 61 | Supply and fixing in replace G I tubing 50 mm dia light grade galvanised with all fitting and fixed fix on wall ceiling or laid in floors complete all as specified and directed at site . ( for cable protection ) |
| 62 | Dismantling of ACSR conductor from steel tubular pole complete all as specified and directed. |
| 63 | Dismantling of insulator any type from pole complete all as specified and directed. |
| 64 | Dismantling of cross arms any size complete all as specified and directed. |
| 65 | Taking down old Unserviceable security light fitting/flood light any size complete all as specified and directed . |
| 66 | S&F in replacement LED security light fitting 60 watts made of pressure diecast aluminium housing with acrylic cover as diffuser with IP65 and IK -07 protection , THD<10%, lumen output >= 110 lumen per watts with integrated electronic driver incl copper connecting wire three core of suitable size up to connector of ceiling rose complete all as specified and directed. |
| 67 | S&F in replacement LED flood light 100 watt 230 volts AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp and making necessary connections complete all as specified and directed. |
| 68 | S&F in replacing GI mounting pipe of building security lights of size 32 mm to 40 mm size upto 1.2 mtr length bend into sizes incl mounting clamps made of MS flat saddles, nut bolt and washers all as specified and directed . |
| 69 | S & f in replacement PVC insulated stranded copper conductor FRLS 1.5 sqmm for connection from pole junction box to connector of street light fitting complete all including taking down all as specified and directed.( For street light jn box to connector) |
| 70 | S&F in repairs Bollard 20 watts fully aluminium cast body finished with poly urethane paint ( with prior treatment ) of length 647 mm and circular base dimeter of leg of bollard 76 mmsurrounded with fully cast aluminium body finished with polyurethane paint with acrylic diffuser with B 22 base for fixing warm white/milky white LED bulb . Total length of bollard fitting 1181 mm complete all as specified and directed .Model No MBL-D-002 of make Mepro electricals / equivalent make of Crompton/Bajaj |
| 71 | Taking down old Unserviceable LT pole for security light fitting/flood light for replacing it with architectural lights incl necessary excavation , breaking of PCC complete all as specified and directed. |
| 72 | S&F cast aluminium heavy pole designer leg and broader designer base with broader plate 422MM x 422 MM finished with polyurethane paint(with prior treatments) Max diameter of one leg at middle is approx. 65 mm and at edges is approx. 75 mm. Outer dia for spigot entry 60 MM . 03 Nos T shaped bolts with nuts & washers provided for concrete foundation. Total length of the pole including base and legs (base with plate x03 nos legs) is 2515 MM (8 feet 3 inches) complete all as specified and directed by Engineer in Charge Model No MCPL-02 of make Mepro electricals / equivalent in Crompton/Bajaj |
| 73 | Supply and fix fully cast aluminium finished with polyurethane paint ( with prior treatment ) square junction with max projection breadth of 950 MM suitable for 02 nos and three nos post top lantern for 2.5 meter and 3 meter pole. Model No of square junction is CDPB04 of mepro electricals/equivalent in Bajaj/Crompton ( connected item of item No here in above ) |
| 74 | M&L for post top lantern fully cast-iron body finished with polyurethane paint (with prior treatment) with acrylic window cover with total length 606 mm and Max breadth 330 mm with B22 brass holder provided with aluminium cover for fixing in architectural pole. Spigot entry 78 mm as per IS 10322 part-5 section 1 latest 2017 suitable for 20 to 40 W LED bulb complete all as specified and directed. Model No of post top: PTL-003 of mepro electricals/equivalent in Bajaj/Crompton (connected item of item No here in above) |
| 75 | M&L for post top lantern fully cast iron body finished with polyurethane paint ( with prior treatment ) with acrylic window cover with total length 434 mm and Max breadth 234 mm with B22 brass holder provided with aluminium cover for fixing in architectural pole . Spigot entry 62 mm as per IS 10322 part-5 section 1 latest 2017 suitable for 05 to 15 W LED bulb complete all as specified and directed. Model No of post top: PTL-03 of mepro electricals/equivalent in Bajaj/Crompton ( connected item of item No here in above ) |
| 76 | M&L for shifting of LT steel tubular swaged pole 09 Mtr pole by breaking the coping, PCC foundation, securing the pole with rope for safety, shifting the pole from existing location to another location as directed incl refixing the same in new suitable location all as specified and directed. Note: Rate for excavation, earth work, foundation PCC, coping incl all tools and tackles will deemed be included in the unit rate |
| 77 | Supply installing, testing and commissioning of LT Panel outdoor kiosk type of Size 1.8 x 1.5 x 0.5 Mtr factory made of angle iron 65mmx 65mmx 6mm on all side welded to 3.15 mm thick CRCA sheet steel for outer compartment and 2.0 mm thick for inner compartment with openable shutteron both sides ( front and rear) , having locking arrangement totally enclosed weather proof outdoor spray painted internally and externally with two coats of synthetic enamel paint over a coat of primer suitable for 440 volts, 3 phase, 4 wire, 50 Hz with Aluminium bas bar of capacity 800 Amps AC supply, electrically connected as per norms and fitted with following accessories all as specified and directed by the Engr-in Charge. (Note:- LT panel shall be mounted on PCC 1:2:4 type B-1 with 20 mm graded stone aggregate foundation block of suitable size upto 40 cm above ground level as directed. The cost of the PCC block shall be deemed to be included in the unit rate quoted for the item. The panels shall be of CPRI approved Note:- Drg of panel shall got approved before execution at site. INCOMMER Incoming MCCB, 415V, 4 pole, 400 Amps, 36 KA, Ics =100% IcuIndicator Lamp-01 Set (Set of three)Voltmeter 0-500 Volt , 415V , 50 Hz ,with selector switches -01 setAmmeter 0- 500 Amps with CTs, 415V 50 Hz with selector switches -01 setOUTGOINGMCCB, 415V, 4 pole, 250 Amps, 25 KA -01 No MCCB 4 pole 200 amp, 415V, 36 KA, 4 pole , 01Nos MCCB 4 pole 63 amp, 415V, 16 KA, 4 pole , 01 Nos MCB SPN 40 Amps , 230V, 50 Hz - 01 Nos |
| 78 | Supply installing, testing and commissioning of LT Panel outdoor kiosk type of Size 1.5 x 1.2 x 0.5 factory made of angle iron 65mmx 65mmx 6mm on all side welded to 3.15 mm thick CRCA sheet steel for outer compartment and 2.0 mm thick for inner compartment with openable shutteron both sides ( front and rear) , having locking arrangement totally enclosed weather proof outdoor spray painted internally and externally with two coats of synthetic enamel paint over a coat of primer suitable for 440 volts, 3 phase, 4 wire, 50 Hz with Aluminium bas bar of capacity 600 Amps AC supply, electrically connected as per norms and fitted with following accessories all as specified and directed by the Engr-in Charge. (Note:- LT panel shall be mounted on PCC 1:2:4 type B-1 with 20 mm graded stone aggregate foundation block of suitable size upto 40 cm above ground level as directed. The cost of the PCC block shall be deemed to be included in the unit rate quoted for the item. The panels shall be of CPRI approved Note:- Drg of panel shall got approved before execution at site. INCOMMER Incoming MCCB, 415V, 4 pole, 250 Amps, 25 KA, Ics =100% IcuIndicator Lamp-01 Set (Set of three)Voltmeter 0-500 Volt , 415V , 50 Hz ,with selector switches -01 setAmmeter 0- 500 Amps with CTs, 415V 50 Hz with selector switches -01 setOUTGOINGMCCB, 415V, 4 pole, 160 Amps, 25 KA -01 No MCCB 4 pole 125 amp, 415V, 25 KA, 4 pole , 01 Nos MCCB 4 pole 63 amp, 415V, 16 KA, 4 pole , 01 Nos MCB SPN 40 Amps , 230V, 50 Hz - 01 Nos |
| 79 | Supply installing, testing and commissioning of LT Panel outdoor kiosk type of Size 1.5 x 1.2 x 0.5 factory made of angle iron 65mmx 65mmx 6mm on all side welded to 3.15 mm thick CRCA sheet steel for outer compartment and 2.0 mm thick for inner compartment with openable shutteron both sides ( front and rear) , having locking arrangement totally enclosed weather proof outdoor spray painted internally and externally with two coats of synthetic enamel paint over a coat of primer suitable for 440 volts, 3 phase, 4 wire, 50 Hz with Aluminium bas bar of capacity 600 Amps AC supply, electrically connected as per norms and fitted with following accessories all as specified and directed by the Engr-in Charge. (Note:- LT panel shall be mounted on PCC 1:2:4 type B-1 with 20 mm graded stone aggregate foundation block of suitable size upto 40 cm above ground level as directed. The cost of the PCC block shall be deemed to be included in the unit rate quoted for the item. The panels shall be of CPRI approved Note:- Drg of panel shall got approved before execution at site. INCOMMER Incoming MCCB, 415V, 4 pole, 250 Amps, 25 KA, Ics =100% IcuIndicator Lamp-01 Set (Set of three)Voltmeter 0-500 Volt , 415V , 50 Hz ,with selector switches -01 setAmmeter 0- 500 Amps with CTs, 415V 50 Hz with selector switches -01 setOUTGOINGMCCB, 415V, 4 pole, 160 Amps, 25 KA -01 No MCCB 4 pole 125 amp, 415V, 25 KA, 4 pole , 01 Nos MCCB 4 pole 63 amp, 415V, 16 KA, 4 pole , 01 Nos MCB SPN 40 Amps , 230V, 50 Hz - 01 Nos |
| 80 | Supply installing, testing and commissioning of Bus bar junction box panel outdoor kiosk type Size 1.5 x 1.2 x 0.3 Mtr factory made of angle iron 65mmx 65mmx 6mm on all side welded to 3.15 mm thick CRCA sheet steel for outer compartment and 2.0 mm thick for inner compartment with openable shutteron both sides ( front and rear) , having locking arrangement totally enclosed weather proof outdoor spray painted internally and externally with two coats of synthetic enamel paint over a coat of primer suitable for 440 volts, 3 phase, 4 wire, 50 Hz with Aluminium bas bar of capacity 800 Amps AC supply, electrically connected as per norms and fitted with following accessories all as specified and directed by the Engr-in Charge. (Note:- Bus bar junction box shall be mounted on PCC 1:2:4 type B-1 with 20 mm graded stone aggregate foundation block of suitable size upto 40 cm above ground level as directed. The cost of the PCC block shall be deemed to be included in the unit rate quoted for the item. Note:- Drg of bus bar junction box panel shall got approved before execution at site. INCOMMER/OUT GOINGIncoming MCCB, 415V, 4 pole, 400 Amps, 36 KA, Ics =100% Icu -01 nosIndicator Lamp-01 Set (Set of three) |
| 81 | Supply installing, testing and commissioning of Bus bar junction box panel outdoor kiosk type Size 1.5 x 1.2 x 0.3 Mtr factory made of angle iron 65mmx 65mmx 6mm on all side welded to 3.15 mm thick CRCA sheet steel for outer compartment and 2.0 mm thick for inner compartment with openable shutteron both sides ( front and rear) , having locking arrangement totally enclosed weather proof outdoor spray painted internally and externally with two coats of synthetic enamel paint over a coat of primer suitable for 440 volts, 3 phase, 4 wire, 50 Hz with Aluminium bas bar of capacity 800 Amps AC supply, electrically connected as per norms and fitted with following accessories all as specified and directed by the Engr-in Charge. (Note:- Bus bar junction box shall be mounted on PCC 1:2:4 type B-1 with 20 mm graded stone aggregate foundation block of suitable size upto 40 cm above ground level as directed. The cost of the PCC block shall be deemed to be included in the unit rate quoted for the item. Note:- Drg of bus bar junction box panel shall got approved before execution at site. INCOMMER/OUT GOINGIncoming MCCB, 415V, 4 pole, 400 Amps, 36 KA, Ics =100% Icu -01 nosIndicator Lamp-01 Set (Set of three) |
| 82 | M&L plain cement concrete ratio 1:3:6 type C2 using 40 mm graded stone aggregate as in foundation filling andf mass concrete for stay/pole foundation complete incl necessary form work all as specified and directed. |
| 83 | M&L plain cement concrete ratio 1:2:4 type B1 using 20 mm graded stone aggregate as in foundation filling andf mass concrete for coping including necessary form work complete all as specified and directed. |
| 84 | M&L plain cement concrete ratio 1:4:8 type B2 using 40 mm graded stone aggregate as in foundation filling andf mass concrete for base (bottom of pit of bed concerete) incl necessary form work complete all as specified and directed. |
| 85 | S&F in replacing FRP junction box for security lights and size not less than 300x200x120 mm ( cable entry size upto 25 sqmm 4 core ) , IP 66 protection water proof and temperature resistant .The junction box comprises of DIN rail and terminal for 3 phase with 01 Nos MCB SP 6 Amps 'C' curve with mounting clamps made out of 02 x MS flat 40x4 mm size with nut bolt and washers complete all as specified and directed. |
| 86 | Earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 Mtr below normal ground level connected to and including galvanised iron strip 25X4 mm as earthing lead by means of bolts, nuts, check nuts & washers etc made of GI and connected to earthing test point all as shown in electrical plate No. 3 of SSR Part I of 2009.00 & as specified or indicated and testing on completion including exaction/earth work in any type of strata PCC ( 1:3:6 ) type C1 earthing chamber, pre cast slab 50 mm thick in cement concrete ( 1: 2 : 4 ) type B 1 ( reinforced with welded steel wire fabric (XPM) weight not less than 4 Kg / Sqm), funnel with wire mesh, I watering pipe of 20 mm bore medium grade and lugs, including galvanised iron strip 25X4 mm with GI protection pipe of 40 mm medium grade 7.5 meter long, etc complete all as specified.( 02x earthing for LT panel and 01x earthing for Bus bar panel) |
| 87 | Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtrs in depth for laying of cables including getting out in hard soil complete all as specified and directed. (cable shall be laid 60 cm below ground level ) |
| 88 | Returning filling in including spreading, levelling ,and well ramming, in layers not exceeding 25 cm each layer of any kind of soil. |
| 89 | Removing surplus excavated material from site not exceeding 50 mtrs from starting point and depositing where directed at level not exceeding 1.5 mtr above the starting point. |
| 90 | Supply and laying double walled corrugated HDPE pipe of size63 mm inner dia as per IS 16205 , anti termite, anti rodency ,non flame propagation property etc for protection of LT cables complete all as specified and directed. |
| 91 | M&L for taking out old /usnv LT cables any size complete all as specified and directed.Note : Excavation and earth work will be measured and paid as per relevant item of this schedule |
| 92 | Supply and fixing under ground XLPE insulated armoured heavy duty electric cable with aluminium conductor cable 1100 volts grade laid in trenches / passing through GI pipe / on pole / on wall of size 16 sq mm 4core complete all as specified .(for security lights) |
| 93 | Supply and fixing under ground XLPE insulated armoured heavy duty electric cable with aluminium conductor cable 1100 volts grade laid in trenches / passing through GI pipe / on pole / on wall of size 10 sq mm 2core complete all as specified . |
| 94 | Supply and fixing under ground XLPE insulated armoured heavy duty electric cable with aluminium conductor cable 1100 volts grade laid in trenches / passing through GI pipe / on pole / on wall of size 06 sq mm 2core complete all as specified and directed. ( for bldg lights/flood lights) |
| 95 | Supply and fixing in replace G I tubing 50 mm dia light grade galvanised with all fitting and fix on wall ceiling or laid in floors complete all as specified and directed at site . ( for cable protection ) |
| 96 | Dismantling of ACSR conductor from steel tubular pole complete all as specified and directed. |
| 97 | Dismantling of insulator any type from pole complete all as specified and directed. |
| 98 | Dismantling of cross arms any size complete all as specified and directed. |
| 99 | S&F in replacement LED security light fitting 60 watts made of pressure diecast aluminium housing with acrylic cover as diffuser with IP65 and IK -07 protection , THD<10%, lumen output >= 110 lumen per watts with integrated electronic driver incl copper connecting wire three core of suitable size upto connector of light fitting complete all as specified and directed. |
| 100 | S&F in replacement LED flood light 100 watt 230 volts AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp and making necessary connections complete all as specified and directed. |
| 101 | S&F in replacing GI mounting pipe of building security lights of size 32 mm to 40 mm size upto 1.2 mtr length and bend into 30 degree angle incl mounting clamps made of MS flat saddles, nut bolt and washers all as specified and directed . |
| 102 | S & f in replacement PVC insulated stranded copper conductor FRLS 1.5 sqmm for connection from pole junction box to connector of street light fitting complete all including taking down all as specified and directed.( For street light jn box to connector) |
| 103 | M&L for replacing 3 core copper flexible cable 2.5 sqmm PVC sheathed FRLS complete all as specified and directed .( for flood lights and bollards) |
| 104 | S&F in repairs Bollard 20 watts fully aluminium cast body finished with poly urethane paint ( with prior treatment ) of length 647 mm and circular base, diameter of leg of bollard 76 mm surrounded with fully cast aluminium body finished with ploy urethane paint with acrylic diffuser with B 22 base for fixing warm white/milky white LED bulb . Total length of bollard fitting 1181 mm complete all as specified and directed .Model No MBL-D-002 of make Mepro electricals / equivalent make of Crompton/Bajaj |
| 105 | M&L for shifting of LT steel tubular swaged pole 09 Mtr pole by breaking the coping , PCC foundation , securing the pole with rope for safety ,shifting the pole from existing location to another location as directed incl refixing the same in new suitable location all as specified and directed. Note: Rate for excavation , earth work ,foundation PCC , coping incl all tools and tackles will deemed be included in the unit rate |
| 106 | Supply installing, testing and commissioning of Bus bar junction box panel outdoor kiosk type Size 1.5 x 1.2 x 0.3 Mtr factory made of angle iron 65mmx 65mmx 6mm on all side welded to 3.15 mm thick CRCA sheet steel for outer compartment and 2.0 mm thick for inner compartment with openable shutteron both sides ( front and rear) , having locking arrangement totally enclosed weather proof outdoor spray painted internally and externally with two coats of synthetic enamel paint over a coat of primer suitable for 440 volts, 3 phase, 4 wire, 50 Hz with Aluminium bas bar of capacity 800 Amps AC supply, electrically connected as per norms and fitted with following accessories all as specified and directed by the Engr-in Charge. (Note:- Bus bar junction box shall be mounted on PCC 1:2:4 type B-1 with 20 mm graded stone aggregate foundation block of suitable size upto 40 cm above ground level as directed. The cost of the PCC block shall be deemed to be included in the unit rate quoted for the item. Note:- Drg of bus bar junction box panel shall got approved before execution at site. INCOMMER/OUT GOINGIncoming MCCB, 415V, 4 pole, 400 Amps, 36 KA, Ics =100% Icu -01 nosIndicator Lamp-01 Set (Set of three) |
| 107 | M&L plain cement concrete ratio 1:3:6 type C2 using 40 mm graded stone aggregate as in foundation filling and mass concrete for stay/pole foundation complete incl necessary form work all as specified and directed.( for pole foundation and architectural light foundation) |
| 108 | M&L plain cement concrete ratio 1:2:4 type B1 using 20 mm graded stone aggregate as in foundation filling and mass concrete for coping including necessary form work complete all as specified and directed.( for pole coping and for bollards) |
| 109 | M&L plain cement concrete ratio 1:4:8 type B2 using 40 mm graded stone aggregate as in foundation filling and mass concrete for base (bottom of pit of bed concrete) incl necessary form work complete all as specified and directed. |
| 110 | S&F in replacing FRP junction box for security lights and size not less than 300x200x120 mm ( cable entry size upto 25 sqmm 4 core ) , IP 66 protection water proof and temperature resistant .The junction box comprises of DIN rail and terminal for 3 phase with 01 Nos MCB SP 6 Amps 'B' curve with mounting clamps made out of 02 x MS flat 40x4 mm size with nut bolt and washers complete all as specified and directed. |
| 111 | Earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 Mtr below normal ground level connected to and including galvanised iron strip 25X4 mm as earthing lead by means of bolts, nuts, check nuts & washers etc made of GI and connected to earthing test point all as shown in electrical plate No. 3 of SSR Part I of 2009.00 & as specified or indicated and testing on completion including exaction/earth work in any type of strata PCC ( 1:3:6 ) type C1 earthing chamber, pre cast slab 50 mm thick in cement concrete ( 1: 2 : 4 ) type B 1 ( reinforced with welded steel wire fabric (XPM) weight not less than 4 Kg / Sqm), funnel with wire mesh, I watering pipe of 20 mm bore medium grade and lugs, including galvanised iron strip 25X4 mm with GI protection pipe of 40 mm medium grade 7.5 meter long, etc complete all as specified.( for bar panel , 01x Existing , 01x new ) |
| 112 | Deduct Credit for Demolished/Dismantled material Rs (-) 37,545 (Minus) as listed in Schedule 'A' Part-II (Credit Schedule)Note : Tenderers will not quote against this item being a tentative amount, to be considered to arrive at the 'Contract Sum'. |
AI Tender Summary
Tender Timeline
Oct 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysOct 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender