Tender For Widening Of Road From Institute To Complex Under Ge Nams
Tender Value
38.83 Lakhs
Estimated cost
Bid Submission
24 Oct 2026
6 days left
EMD
77600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Amritsar → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Widening Of Road From Institute To Complex Under Ge Nams
BOQ
| Sl. No. | Item Description |
| 1 | Excavating over areas, not exceeding 1.5 m deep, and getting out in soft/loose soil, complete all as specified and as directed. |
| 2 | Rolling and consolidating formation surfaces in cutting with an 8 to 12 tonne roller, including filling depressions which occur during rolling, complete all as specified and as directed. |
| 3 | Material and labour for 150 mm thick spread thickness as in soling (or sub-base) with broken boulders or quarried stone, interstices filled, surface formed, rolled and consolidated to the required gradient and camber complete all as specified and as directed. |
| 4 | Material and labour for 150 mm thick (compacted thickness) WBM using granite or trap stone coarse aggregates of Grading 2 (63 to 40 mm size) or Grading 3 (50 to 20 mm size), spread, rolled and consolidated to the required gradient and camber, etc., complete all as specified and as directed. |
| 5 | Material and labour for applying an even priming/tack coat of VG-10 @ 8 kg per 10 Sqm, complete all as specified and as directed. |
| 6 | Material and labour for preparing black top surface by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. |
| 7 | Material and labour for applying an even priming/tack coat of VG-10 @ 2.5 kg per 10 Sqm, complete all as specified and as directed. |
| 8 | Material and labour for premix bituminous macadam laid, rolled and compacted to the required gradient and camber (consolidated thickness 75 mm or less) with a binder content of 4% by weight of the total mix, using coarse aggregate Grading 2 (up to 20 mm size), rolled with a 10 to 12 tonne power road roller, complete all as specified and directed. |
| 9 | Material and labour for bituminous premix asphaltic dense concrete, 30 mm thick (consolidated thickness), with paving bitumen VG-30, 5.5% binder content by weight of the total mix, mixed in a hot mechanical plant, laid with a mechanical paver, rolled and compacted with an 8–12 tonne power road roller to the required camber and gradient, complete all as specified and directed.Note :- (a) Material for SDAC shall be mixed in hot mixing plant.(b) Mix design of bituminous SDAC will be got done from approved lab.(c) The SDAC shall be laid with mechanical mixer as specified in clause 20A27 of MES SSR Part-I the spreading of SDAC shall be done by mechanical sensor Paver only. |
| 10 | Removing excavated material, not exceeding 50 m, and depositing where directed at a level not exceeding 1.5 m above the starting point, as in soils. Complete all as specified and directed. |
| 11 | Material and labour for preparation of bituminous surfaces of roads and marking 2.5mm thick centre lines, stop lines dashes, arrows etc and the like not exceeding 10cm wide on roads pavements, with hot applied thermo plastic road marking paint of approved colour conforming to BS 3262-1989 with special applicator machine all as per manufacturers instruction, complete all as specified and as directed. |
| 12 | Supply and fix in replacement for cat eye reflective type metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector fixed with & including MS stud of suitable size as per manufacturer instructions, complete all as specified and as directed. Make : DA 972 of Dark eye or equivalent from other makes given in list of makes. |
| 13 | Supply and fixing in replacement for solar studs aluminum alloy (100% water proofing design according to 65) of size 125mm x 125mm x 25 mm (shank 65mm) of high efffiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc complete, all as specified and directed. |
| 14 | Supply and fixing in repair metal tubular delineator made out of ABS round body fitted with 2 NOs 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermoplastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete, all as specified and directed. |
| 15 | Supply and fixing Road safety convex Polycarbonate reflective mirrors of size 100 cms body made of ABS/Fibre/Plastic with hood and mounting hardware with 100mm GI Pipe 1.50m long embedded in PCC bed block of size 300x300x400mm in PCC 1:3:6 type C-1 using 20mm graded stone aggregate complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysOct 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender