Tender For Repair / Maintenance Of Joinery, Plastering, Plumbing, Sanitary And Certain B&R Works For Def Civilian Md Accn At Aec Trg College And Centre Pachmarhi
Tender Value
9 Lakhs
Estimated cost
Bid Submission
23 Oct 2026
17 days left
EMD
18000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hoshangabad → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair / Maintenance Of Joinery, Plastering, Plumbing, Sanitary And Certain B&R Works For Def Civilian Md Accn At Aec Trg College And Centre Pachmarhi
BOQ
| Sl. No. | Item Description |
| 1 | S&F in repair 15 mm dia bib tap cast copper alloy (fency type), chromium plated, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified and directed by Engineer-in-charge. |
| 2 | S & F including dismantling rotational moulded polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed in position 500 ltrs capacity including dismantling of existing water tank of any description, complete all as specified in SSR Part I and and directed by Engineer-in-charge. |
| 3 | S & F including dismantling rotational moulded polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed in position 1000 ltrs capacity including dismantling of existing water tank of any description, complete all as specified in SSR Part I and and directed by Engineer-in-charge. |
| 4 | S&F ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for 20mm dia iron pipe and fixed.(Minimum weight 210gm), complete all as specified and directed by Engineer-in-charge. |
| 5 | M&L for providing water proofing treatment on inaccessible roof surfaces (horizontal and vertical surfaces) through authroised applicator of manufacturers comprising :-(a) Cleaning of new concerete surfaces properly and drying the surfaces and applying 10mm thick rendering over a coat of cement slurry mixed with WPC.(b) M & L for applying a tack coat of Industrial bitumen grade of 85/25 at the rate of 1.2 Kg per Sqm including cleaning surfaces (1st coat for bonding material below membrane and 2nd coat on top of membrane. Each coat will be paid seperately.) (c) Applying a coat of Oxidised bitumen based solvent primer @ 0.30 Kg/Sqr mtr (d) providing 3mm thick APP (Ataclic Polypropylene) modified water proofing membrane with polyestar core, overlaps, sealed and bonded to the surfaces with torch application (e) Applying two coats of bituminous aluminium paint @ 200gm per sqr mtr (min) in two coats as per manufactueres instructions complete all as specified (Cost of water proofing compound shall deem to be included in unit rates quoted by contractors) |
| 6 | Taking down chowkat with shutter (without taking off shutter from the frame) area exc 1.5 sq.m but n.exc 4 Sqm each and removing from the site as directed by Engineer in charge. |
| 7 | Taking down chowkhats or frames with shutters ( without taking off shutters from the frames) area n.exc 1.5 sqm each complete all as specified and directed by Engineer-in-charge. |
| 8 | M&L Aluminium powder coated (powder coated of requried colour) three track sliding windows frame top & sides of size 92x31.75x1.50 mm (section No 20831), bottom size 92x31.75x1.50mm (section No 20832) and shutter top & bottom of size 40x18x1.55mm (section No 20736) and sides (handle) of size 40x18x1.55mm (section No 20738) and lock side shutter frame of size 40x18x1.45mm ( section No 20737)\\" with including and fixing rubber gasket, beading and locking arrangement including making good to the disturbed portion complete including & fixing stainless steel wire mesh 0.36mm nominal dia of wire with 1.40mm average aperture and fixed with stainless steel wire staples and including and fixing 5mm thick glass with necessary rubber beading gasket etc including necessary plaster, painting ,cill and making good to disturbed portion all as specified and as directed by Engr-in-charge. |
| 9 | S&F Framed work such as grills,gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed by Engineer-in-charge. |
| 10 | S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/clading to wall, fixed with self tapping screws as specified including dismantling Asbestos cement sheet ( corrugated, semi corrugated etc) in roof covering, complete all as specified and directed by Engineer-in-charge. |
| 11 | S&F pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in ridges, roof covering/clading to wall, fixed with self tapping screws as specified including dismantling Asbestos cement sheet ( corrugated, semi corrugated etc) in roof covering, complete all as specified and directed by Engineer-in-charge. |
| 12 | dismantling timber scantling 40 sqcm and over in section, in any position, complete all as specified and directed by Engineer-in-charge. |
| 13 | S&F for MS framed works as in trusses, purline, rafters, column square/rectangular, round or angle section, fixed with and including iron cleats or other connected plates flate iron wind ties etc incl bending of MS section as requried complete all as specified and as directed. Fe-410 gd 250. |
| 14 | M & L exposed metal frame ceiling with 4 mm thick calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600 mm grid fixed or laid/inserted to GI frame work with screws over Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. Hangers 4 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including dismantling of wall and ceiling board or insulation boards/ slabs/ blankets, any thickness, including cover fillets. complete all as specified and directed by Engineer-in-charge. |
| 15 | Demolition of cement concrete in ground floor and paving n.exc 15 cm below or above ground level, complete all as specified and directed by Engineer-in-charge. |
| 16 | M&L for Brick work with sub class `B` bricks straight or curved on plan exc 6 m mean radius built in cement mortar( 1:6) including Demolition of brick work or stone masonry built in cement mortar including all quoins, pillars, arches etc. but excluding ashlar facings, dressed stone work and precast concrete articles, complete all as specified and directed by Engineer-in-charge. |
| 17 | M & L rendering 10mm thick on fair face of brickwork or concrete surfaces in cement mortar 1:6 complete all as specified and directed by Engineer-in-charge. |
| 18 | M & L preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth of steel surfaces at any height and applying two coats of synthetic enamel paints over a priming coat of redoxide etc. |
| 19 | M&L preparation of new decorated surfaces of wall and applying two coat of oil bound distemper including filling of minor nail hole with wall putty complete all as specified and directed by Engineer-in-charge. |
| 20 | M & L preparation of old wood surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paints, complete all as specified and directed by Engineer-in-charge. |
| 21 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed by Engineer-in-charge. |
| 22 | M & L 20 to 25 mm thick machine cut Kota stone slab in flooring or treads of steps over and including 20mm thick screed bed in cement mortar 1:6, laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing complete all as specified and directed by Engineer-in-charge. |
| 23 | Description same as per item No 22 above but as in skirting or vertical surfaces including 10 mm thick rendering in cement mortar 1:4, complete all as specified and directed by Engineer-in-charge. |
| 24 | M&L vitrified tiles tiles 8-10 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:4) & dismantling floor hearth or wall tilling and removing rubbish off the premises. complete all as specified and directed by Engineer-in-charge. |
| 25 | S & F in repair 25mm dia Stainless steel curtain rod of 1 mm thick fancy type fixed with modren bracket & doms design & sample approved by Engr -in Charge, complete all as specified and directed by Engineer-in-charge. |
| 26 | M & L PCC 1:4:8 type D-2 using 40 mm graded aggregate as in mass concrete, foundation and any other location etc. complete all as specified and directed by Engineer-in-charge. |
| 27 | M & L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in cills, steps, seismic and other similar bands, plinth courses, string courses, parapets and railing upto 60 cm in height, coping, kneelers, apex stones bed plates, etc and the like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary use and waste of form work, complete all as specified and directed by Engineer-in-charge. |
| 28 | M & L sand filling under floors or interlocking tile or in foundation including watering and consolidation complete all as specified and directed by Engineer-in-charge. |
| 29 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required, complete all as specified and directed by Engineer-in-charge. |
| 30 | M & L machine pressed precast concrete 60 mm thick glossy interlocking paver block M-35 Grade to IS 15658-2006, with grey cement and pigment laid over dry sand cushioning, filling of joints with sand, complete all as specified and directed by Engineer-in-charge. Colour and shape approved by GENote : Sand cushioning shall be measured and paid separately. |
| 31 | M & L for chequered cement concrete tiles 20cm x 20cm x 25 to 30mm thick (Glosy finished) with grey cement and pigment, over and including 15mm thick screed in CM 1:6, set jointed & pointed in neat cement slurry in floors and cut & polished complete including demolition complete all as specified and directed by Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysOct 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender