Tender For Balance Work Of Mch Building At Civil Hospital Sunder Nagar Distt. Mandi Hp(Sh:- Construction of Firefighting Structure And Sheet For Proposed Pump House And Providing Ceiling In Mch Ot Portion, Record Room And Porch Etc.).
Tender Value
18.82 Lakhs
Estimated cost
Bid Submission
15 Oct 2026
0 days left
EMD
38000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mandi → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Balance Work Of Mch Building At Civil Hospital Sunder Nagar Distt. Mandi Hp(Sh:- Construction of Firefighting Structure And Sheet For Proposed Pump House And Providing Ceiling In Mch Ot Portion, Record Room And Porch Etc.).
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding any metre in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto any metre , including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of any metre . All kinds of soil as per direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government but excluding GST. |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (one Cement : three coarse sand : six graded stone aggregate 40 mm ( forty millimetre ) nominal size as per direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government but excluding GST. |
| 3 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (one cement : six coarse sand : twelve graded stone aggregate 20 mm ( twenty millimetre ) nominal size upto plinth level with : Cement mortar 1:6 (one cement : six coarse sand) as per direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government but excluding GST. |
| 4 | Stone filling under floor as per direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government but excluding GST. |
| 5 | Centering and shuttering including strutting, propping etc. and removal of form for all heights : Foundations, footings, bases for columns as per direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government but excluding GST. |
| 6 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-incharge.“( Note :- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately). All works upto plinth level. as per direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government but excluding GST. |
| 7 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars as per direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government but excluding GST. |
| 8 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (one cement : six coarse sand) as per direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government but excluding GST. |
| 9 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Sal wood as per direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government but excluding GST. |
| 10 | Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws first class deodar wood as per direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government but excluding GST. |
| 11 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :300x16 mm as per direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government but excluding GST. |
| 12 | Providing and fixing aluminium tower bolts, ISI marked as per direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government but excluding GST. |
| 13 | 150x10mm ( one hundred fifty x ten millimetre ) |
| 14 | 100x10mm ( one hundred x ten millimetre ) |
| 15 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete as per direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government but excluding GST. |
| 16 | 125 mm ( one hundred twenty five millimetre ) |
| 17 | 100 mm ( one hundred millimetre ) |
| 18 | 20 mm cement plaster of mix :1:6 (1 cement: 6 coarse sand) as per direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government but excluding GST. |
| 19 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government but excluding GST. |
| 20 | Distempering with dry distemper of approved brand and manufacture (one or more coats) and of required shade on old work to give an even shade as per direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government but excluding GST. |
| 21 | Applying priming coat:With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) as per direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government but excluding GST. |
| 22 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work as per direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government but excluding GST. |
| 23 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.60 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as per direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government but excluding GST. |
| 24 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 1518 microns using self drilling/ self tapping screws complete as per direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government but excluding GST. |
| 25 | Ridges plain (500 - 600mm) ( five hundred - six hundred millimetre ) |
| 26 | Barge board (Upto 300 mm) ( three millimetre) |
| 27 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes as per direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government but excluding GST. |
| 28 | Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within any metres lead. as per direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government but excluding GST. |
| 29 | Providing and fixing M.S. BP Sheet 1.66mm( one point sixty six millimetre ) to 2mm ( two millimetre ) thick in eaves board/facia/ soffits/ ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely) as per direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government but excluding GST. |
| 30 | Structure steel work riveted , bolted or welded in built up sections, trusses and framed work,including cutting, hoisting fixing in position and applying a priming coat of red lead paint as per direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government but excluding GST. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayOct 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender