Tender For Restoration Of Rain Damages To Water Supply Scheme Nauna Bahugi In Gp Balichowki Tehsil Balichowki Distt Mandi Hp.(Sh: Construction of Reinforced Cement Concrete Circular Tank 50,000 Ltr Cap At Aligad.)E/Cost: Rs.5,38,866/- E/Money: Rs.108
Tender Value
5.38 Lakhs
Estimated cost
Bid Submission
12 Oct 2026
6 days left
EMD
10800
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mandi → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Restoration Of Rain Damages To Water Supply Scheme Nauna Bahugi In Gp Balichowki Tehsil Balichowki Distt Mandi Hp.(Sh: Construction of Reinforced Cement Concrete Circular Tank 50,000 Ltr Cap At Aligad.)E/Cost: Rs.5,38,866/- E/Money: Rs.10800/- Cost Of Tender Form:- 350/- Time Limit: 3 Months.
BOQ
| Sl. No. | Item Description |
| 1 | Cutting in earth work and disposal of excavated earth up to a lead of 20 Mtrs in pick work, Jumper work and Blasting work in all leads and lifts. |
| 2 | Excavation in foundations trenches etc. (for pipes and pits ) upto all depths in all kinds of soil such as pick work,jumper work, blasting and chiselling soft/hard rocks where blasting is prohibited in all leads and lifts including trimming and dressing of sides levelling of bed to correct excavation and returning the stacked soil after laying jointing and testing of G.I.Pipes in trenches in 15 cm. layers including consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil as directed in all leads and lifts and soring strutting/timbering and dewatering where ever required including restoration of un-metalled/metalled paved surface of its original conditions including cost of diversion for traffic night signals fixing caution boards and fencing etc.complete in all respects. |
| 3 | Providing and laying cement concrete 1:3:6(1cement:3 sand:6 crushed stone agg.40mm nominal size)and curing complete excluding cost of form work in foundation and plinth in all leads and lifts. |
| 4 | Providing and laying cement concrete 1:1.5:3(1cement: 1.5 sand:3 crushed stone agg.20mm nominal size)and curing complete excluding cost of form work and reinforcement for reinforced concrete work in:- |
| 5 | In foundation and plinth in all leads and lifts. |
| 6 | Walls (any thickness)but not less than 0.1 mtr.thickness)attached pillasters,buttresses,plinth and string courses etc.from top of foundation level upto floor two level in all leads and lifts. |
| 7 | Suspended floors, roofs,landings and shelves and their supports, balconies, beams, girders, bressumers and cantilivers up to floor two level in all leads and lifts. |
| 8 | Providing form work with steel plates 3.15 mm thick welded with angle iron in frames 30x30x5 mm, so as to give a fair finish including centering ,shuttering, propping etc.with wooden battens and ballies, height of propping and centering below supporting floor to ceiling not exceeding 4 meters and removal of the same for-in-situ reinforced concrete and plain concrete work in:- |
| 9 | Vertical surfaces such as walls(any thickness) partitions and the like including attached pillasters,buttresses plinth and string courses and the like in all leads and lifts |
| 10 | Flat surfaces such as soffits of suspended floors,roofs,landings and the like floors etc.upto 200mm in thickness in all leads and lifts. |
| 11 | Edges of slab and breaks in floors and walls under 20 cm wide in all leads and lifts. |
| 12 | Providing tor steel reinforcement for RCC work including bending, binding and placing in position complete up to floor two level including cost of binding wires and carriage of materials upto in all leads and lifts. |
| 13 | Providing and Fixing of 3.15mm MS sheet Manhole cover 600X600 mm made up of 3.15 thick plain MS sheet fixed in angle iron frame of 50x50x5 mm supported MS flat of 50x5mm at center of sheet includinding fising hold fast ,hinges and locking arrangement and lock of medium size in all leads and lifts. |
| 14 | Providing and fixing Gun Metal Wheel valve (with hand wheel) as per specification of the Engineer-In-Charge in all leads and lifts |
| 15 | 65mm dia. |
| 16 | Providing and Fixing of GI pipe 65 mm dia for inlet,outlet and scour pipe in all leads and lifts. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysOct 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender