Tender for NSHES - Supply of Tools, Arc Welding Machines, Chain Pulley Block, different ranges of slings, D Shackles, Wire ropes and Hoses at NSHES, Nagarjuna Sagar.

Sharing tender

NSHES - Supply Of Tools, Arc Welding Machines, Chain Pulley Block, Different Ranges Of Slings, D Shackles, Wire Ropes And Hoses At NSHES, Nagarjuna Sagar. , INSULATED TERMINAL CRIMPING TOOL, 0.5SQMM, 2.5SQMM, 4-6SQMM , HAND OPERATED HYDRAULIC CRIMPING TOOL RANGE:10MM TO 400MM (INCLUDING HEXAGONAL DIES), MAKE: DOWELLS/ JAINSON/ KLAUKE/ Orione Hydropower/ Vankos And Company , MITUTOYO 184-306S FEELER GAUGE,0.01MM TO 0.05MM, 0.05MM TO 1MM, 150MM LONG , PORTABLE ARC WELDING MACHINE, SINGLE PHASE, 230V MAKE: Ador, Model: Champ T-200 / Champ 200/ Ralli Wolf, Model: Ralli ARC 200 SE / ARC 200/ D And H, Model: SUPRA Inverter 200 WITH 3 METERS SUPPLY CABLE, 3 METERS WELDING CABLE WITH HOLDER, 3 METERS RETURN CABLE WITH EARTH CLAMP , CALIPER, VERNIER, TYPE:DIGIMATIC, SIZE:0-300 MM , BLOCK, CHAIN PULLEY, CAPACITY: 1 T, MAXI LIFT: 6 M, MAKE : INDEF, MODEL: P-SERIES , SLING, WIRE ROPE, DIAMETER:8 MM, LENGTH:2 M , STEEL WIRE ROPE SLING, DIA: 8MM X 4MTR, MACHANICALLY SPLICED STEEL, IS-5245 OF 1971 WITH FERRELE SECURED EYE TERMINALS MADE OUT OF BEST PLOUGH FLEXIBLE STEEL WIRE ROPE, IS-2266 OF 1977 WITH MANUFACTURER TEST CERTIFICATES UNGALVANISED 6 X 19 CONSTRUCTION FMC , WIRE ROPE SLING 10MMX3MTR, STEEL , WIRE ROPE SLING, 10MMX5M, STEEL , WIRE ROPE SLING, 12MMX5M, STEEL , SLING,WIRE ROPE, STEEL WITH EYE, 12MM, 3M , WIRE ROPE SLING, 16MMX3M, STEEL , WIRE ROPE SLING, 16MMX5M, STEEL , WIRE ROPE SLING 20MMX3MTR , WIRE ROPE SLING, STEEL, 25MMX2M , WIRE ROPE SLING, STEEL, 25MM X4M , SHACKLE, TYPE: D, LOAD RATING:12 T, MATERIAL: ALLOY STEEL, SPECIFICATION: GR.80, SPECIAL FEATURES:(HD) WITH SCREW PIN TYPE , SHACKLE, TYPE: D, LOAD RATING:3.25 T, MATERIAL: ALLOY STEEL, SPECIFICATION: GR.80, SPECIAL FEATURES: (HD) WITH SCREW PIN TYPE , SHACKLE, TYPE: D, LOAD RATING:4.75 T, MATERIAL: ALLOY STEEL, SPECIFICATION: GR.80, SPECIAL FEATURES: (HD) WITH SCREW PIN TYPE , SHACKLE, TYPE: D, LOAD RATING: 6.5 T, MATERIAL: ALLOY STEEL, SPECIFICATION: GR.80, SPECIAL FEATURES:(HD) WITH SCREW PIN TYPE , SHACKLE, TYPE: D, LOAD RATING: 9.5 T, MATERIAL: ALLOY STEEL, SPECIFICATION: GR.80, SPECIAL FEATURES:(HD) WITH SCREW PIN TYPE , SHACKLE, TYPE: D, DIAMETER: 1/4 IN, LOAD RATING: 0.5 T, MATERIAL: ALLOY STEEL, SPECIFICATION: GRADE 80 , SHACKLE, TYPE: D, DIAMETER:3/8 IN, LOAD RATING: 1 T, MATERIAL: ALLOY STEEL, SPECIFICATION: GRADE 80 , SHACKLE, TYPE: D, DIAMETER: 1/2 IN, LOAD RATING: 2 T, MATERIAL: ALLOY STEEL, SPECIFICATION: GRADE 80 , D-SHACKLE, WORKING LOAD LIMIT: 8.5 TON BODY DIA: 25.4 MM PIN DIA: 28.7 MM JAW INSIDE WIDTH: 42.9 MM INSIDE LENGTH: 81 MM EYE OUT SIDE DIA: 60.5 MM , HOSE, AIR, TYPE:AIR, SIZE:12.5 MM, Nylon Braided, MATERIAL: PVC FLEX , SS FLEXIBLE HOSE, ID-6MM, OD-16MM, WORKING PRESSURE 210KG/CM2, TEST PRESSURE:280KG/CM2, TEMP: 70DEG.C, LENGTH:267MM INCLUDING 12MM MALE THREAD PORTION OF 13 MM DIA ON BOTH ENDS, THREAD PITCH: 1/4 Inch BSP (19 PITCH), HEXAGONAL HEAD SIZE: 21MM , RUBBER HYDRAULIC HOSE, ID-6MM, WORKING PRESSURE: 225KG/CM2, TEST PRESSURE: 450KG/CM2, TEMP: 90DEG.C, LENGTH:267MM INCLUDING 12MM MALE THREAD PORTION OF 13MM DIA ON BOTH ENDS, THREAD PITCH:1/4 Inch BSP (19 TPI), HEXAGONAL HEAD SIZE:21MM, CONFIRMING TO SAE 100 R1AT, OUTER COVER: SYNTHETIC RUBBER BLEND (NBR, SBR OR NEOPRENE/ CR), INNER TUBE: OIL RESISTANT SYNTHETIC RUNNER (NBR) , M18X210 HT STUD, 10.9GRADE WITH 2 NUTS AND WASHER, 65-80-65 , Portable Air Vent Blower, Size:16Inch(400Mm), With Air Duct 16 Inch Diax15mtrs Length With SS Clamps. Supply:240V/50HZ, Speed:2800RPM, AIR FLOW RATE:3700CFM NOTE: PROVISION FOR PROVIDING DUCT AT EITHER SIDE FLANGE FOR INTAKE/EXHAUST FOR VENTILATION. , WELDING MACHINE, 3 Phase Input Voltage 415V/50Hz MAKE:ADOR (Model: Champ T400)/RALLI WOLF(Model:ARC400IJRA40)/ D And H (Model: Supra Inverter-400) , Welding Cable, Copper, Grade: HOFR, Size:50Sq.Mm, IS8130/84 Make: Ador/D And H/ESAB