Tender For Stabilization And Improvement Of 33Kv Lines Of Various Divisions Of Kpdcl (Pddss2627100229) By Way Of Stabilization Of 33 Kvamargrah-Bandipora Line (From Grid Station Amargarh To Receiving Station Watlab)
Tender Value
69 Lakhs
Estimated cost
Bid Submission
26 Oct 2026
10 days left
EMD
1.38 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Baramulla → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Stabilization And Improvement Of 33Kv Lines Of Various Divisions Of Kpdcl (Pddss2627100229) By Way Of Stabilization Of 33 Kvamargrah-Bandipora Line (From Grid Station Amargarh To Receiving Station Watlab)
BOQ
| Sl. No. | Item Description |
| 1 | Supply, Carriage upto site (including Loading/Unloading),Testing and Erection of Steel Tubular Pole, 13 Mtr. Long Pole (ST-410 SP 69) with planting depth of 1/6 th of the height of the pole, (13 mtr. Long ) as per approved drawings/standards |
| 2 | Supply, Carriage upto site (including Loading/Unloading),Testing and Erection of Steel Tubular Pole, 11 Mtr. Long Pole(ST-410 SP-56) with planting depth of 1/6 th of the height of the pole, (11 mtr. Long ) as per approved drawings/standards |
| 3 | Supply, Carriage upto site (including Loading/Unloading), Laying ,Stringing, Tensioning & Binding of ACSR Conductor, (100 Sqmm ACSR Conductor-Dog) as per approved drawings/standards |
| 4 | Supply, Carriage upto site (including Loading/Unloading),Testing & Fixing of GI Channel/ GI V X Arms/Extension Top/Angle Iron/Flat/Belting Angle/Anti Skidding Clamps/Fuse plates of various sizes including clamps as per approved drawings/standards |
| 5 | Supply, Carriage upto site (including Loading/Unloading),Testing & Fixing of 33 kV Isolator with Earthing Blade (36kV,800A, Outdoor,3 poles, 25 kA) as per approved drawings/standards (1 Set=03 Poles) |
| 6 | Supply, Carriage upto site (including Loading/Unloading),Testing & Fixing of PG/T Clamps suitable for 100 Sqmm ACSR as per approved drawings/standards |
| 7 | Supply, Carriage upto site (including Loading/Unloading),Testing & Fixing of 33kV Polymeric composite Pin Insulator 36kV, 10kN, Lighting Impulse 170kV Positive and 180kV Negative, creepage distance 900mm (reputed make)as per approved drawings/standards |
| 8 | Supply, Carriage upto site (including Loading/Unloading),Testing & Fixing of 33kV Polymeric composite Disc Insulator 36kV,min failing load 70kN, Lighting Impulse 170kV Positive and 180kV Negative, creepage distance 900mm with disc fitting (reputed make) as per approved drawings/standards |
| 9 | Supply, Carriage upto site (including Loading/Unloading),Testing & Fixing of Galvinized Nuts and Bolts as per approved drawings/standards |
| 10 | Supply, Carriage upto site (including Loading/Unloading),Testing & Fixing of Spike Earthing Rod Complete by 20 mm, 2.5 mtr long through GI Strip 25x3mm as per approved drawings/standards |
| 11 | Supply & Laying of Cement bottoming for 13 Mtr ST Pole in 1:2:4 mix as per Standards 0.78 cum/pole including the Loading/Carriage/Unloading of required material. |
| 12 | Supply & Laying of Cement bottoming for 11 Mtr ST Pole in 1:2:4 mix as per Standards 0.66 cum / pole including the Loading/Carriage/Unloading of required material. |
| 13 | Supply, Carriage upto site (including Loading/Unloading),Testing & Fixing of Aluminium Jointing Sleeves as per approved drawings/standards |
| 14 | Supply, Carriage upto site (including Loading/Unloading),Testing & Fixing of Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2No.), anchor plate (300x 300 x 8 mm), nut-bolts, 2No.turnbuckles, 1.8m long,20 mm diameter solid GS stay rod & 7/4 mm dia GI stranded wire complete as per approved drawings/standards |
| 15 | Supply, Carriage upto site (including Loading/Unloading),Testing & Fixing of Guard netting as per approved drawings/standards |
| 16 | Supply,Testing,Loading,Carriage,Unloading and fixing of Danger Plates with Clamps as per approved drawings/standards |
| 17 | Supply,Testing,Loading,Carriage,Unloading and fixing of Anti-Climbing Device with Clamps as per approved drawings/standards |
| 18 | Providing & Painting of Poles (13/11Mtr Long) with one coat of Red Oxide and two coats of aluminium paint and as per approved drawings/standards |
| 19 | Dismantlling of existing ST Poles/ PCC poles/wooden poles including loading at site, carriage upto Divisional Stores Amargarh and unloading including all charges |
| 20 | Dismantlling of existing Channels/Angle Iron, Pin Insulators, Disc Insulators, Hardware fittings etc. including loading at site, carriage upto Divisional Stores Amargarh and unloading including all charges |
| 21 | CONTENGENCIES /T&P |
| 22 | Hiring of Vehicle (Scorpio/Bolero/Innova/Tavera or equivalent) to be used by the Engineer Incharge for supervision of the project including Fuel/Toll Tax/ Driver/ any other maintenace charges of the vehicle. The max. Kms to be driven per day is 60 Km. In case the vehicle is utilized less than 60 km on any given day, the payment shall be subject to deduction on account of actual fuel savings. Such deduction shall be worked out proportionately based on the approved mileage (km per litre) of the vehicle and the prevailing fuel rate. |
| 23 | Supply of heavy-duty petrol engine–operated power saw suitable for cutting wood complete with standard accessories, safety guards, robust base, and precision cutting arrangement, equipped with petrol engine of not less than 52 CC capacity, with 18–20 inch guide bar and chain, of approved make and quality, as per directions of the Engineer-in-Charge |
| 24 | Supply of ISI-marked Safety Helmet made of high-quality, impact-resistant HDPE/ABS material, equipped with adjustable headband, chin strap, ventilation system, and sweat-absorbent inner lining, conforming to IS:2925 standards, of approved make and colour, as per directions of the Engineer-in-Charge |
| 25 | Supply of ISI-marked Safety Belt / Full Body Harness made of high-strength polyester webbing with adjustable shoulder and thigh straps, equipped with double lanyard, shock absorber, and forged steel snap hooks, conforming to IS:3521 standards, of approved make and quality, as per directions of the Engineer-in-Charge |
| 26 | Supply of ISI-marked industrial Safety Shoes made of genuine leather with steel toe cap, oil/acid/slip resistant PU sole, shock-absorbing heel, and padded ankle support, conforming to IS:15298 (Part 2) standards, of approved make, size, and quality, as per directions of the Engineer-in-Charge |
| 27 | Supply of Electrical Rubber Insulating Gloves suitable for working up to 33 kV, made of high-dielectric natural rubber, seamless, ergonomically designed, conforming to IS:4770 / IEC 60903 standards, duly tested and certified, complete with manufacturer’s test certificate, of approved make and quality, as per directions of the Engineer-in-Charge. |
| 28 | Supply of Earthing Discharge Rod suitable for safely discharging high-voltage lines/equipment up to 33 kV, made of high-quality epoxy/fiberglass insulating rod with metallic clamp, complete with 16 sqmm multi-strand copper earthing cable of adequate length and earthing terminal, conforming to relevant IS/IEC standards, complete with carrying case, of approved make and quality, as per directions of the Engineer-in-Charge |
| 29 | Supply of High Voltage Detector suitable for outdoor/indoor use, capable of detecting multiple voltage levels ranging from 3.3 kV to 33 kV (or higher as specified), provided with clear audible and visual indication, telescopic epoxy/fiberglass insulating rod, battery-operated electronic circuit, and complete with carrying case, conforming to relevant IS/IEC standards, of approved make and quality, as per directions of the Engineer-in-Charge |
| 30 | Supply of waterproof Rain Coat made of high-quality PVC/Nylon fabric with heat-sealed seams, full sleeves, adjustable hood with drawstring, front zipper with flap, and matching waterproof trousers, complete with carrying pouch, of approved make, size, and quality, as per directions of the Engineer-in-Charge. |
| 31 | Supply of heavy-duty Aluminium Extension Ladder of size 2 × 20 feet (two-section), fabricated from high-tensile aluminium ‘C’ section, with minimum 3 mm wall thickness, complete with rope and pulley arrangement for smooth extension, anti-skid steps, rubber shoes at the base, and safety locking arrangement, of approved make and quality, as per directions of the Engineer-in-Charge |
| 32 | Supply of heavy-duty Telescopic Aluminium Ladder of maximum extended height 18 ft, made of high-tensile aluminium alloy sections with minimum 3 mm wall thickness, equipped with slip-resistant steps, rubber shoes at the base, safety locking mechanism at each stage, lightweight and portable design, conforming to IS standards, of approved make and quality, as per directions of the Engineer-in-Charge |
| 33 | Supply of Heavy Duty Single Folding Bed with Attached Firm Cushion Top, 6ft x 3ft Metal Foldable Bed with glossy finish in multi-color design, featuring attached cushioned mattress (to be supplied to Division for night shift of Watch and Ward staff) |
| 34 | Supply of File Cover Ordinary (to be supplied to Divisional Office) |
| 35 | Supply of Original Printer Cartridge/Ink Toner-071 compatible with Canon ImageCLASS MF275dw printer , high-yield type ensuring clear and smudge-free printing, duly packed and sealed, with manufacturer’s warranty, of approved make and quality (to be supplied to Divisional Office) |
| 36 | Supply of Original Printer Cartridge/Ink Toner-HP 110 A compatible with HP Laserjet 136a , high-yield type ensuring clear and smudge-free printing, duly packed and sealed, with manufacturer’s warranty, of approved make and quality (to be supplied to Divisional Office) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysOct 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender