Tender For Addition/ Alteration To Building No. P-36 (R And D Building) At Pcda (Af), Dehradun.
Tender Value
29.12 Lakhs
Estimated cost
Bid Submission
24 Oct 2026
9 days left
EMD
58300
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dehradun → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition/ Alteration To Building No. P-36 (R And D Building) At Pcda (Af), Dehradun.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (Un-reinforced) in ground floors and pavings n.exc 15cm thick (above or below GL) complete all as specified and directed by Engr-in-Charge. |
| 2 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engr-in-Charge. |
| 3 | Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, jambs etc complete all as specified and directed by Engr-in-Charge. |
| 4 | Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge. |
| 5 | Dismantling wrought iron or mild steel work of any description not otherwise described complete all as specified and directed. |
| 6 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed by Engr-in-Charge. |
| 7 | Taking down cement plaster of any description on brick work or stone masonry walls including rackingout joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engr-in-Charge. |
| 8 | Taking down shutter of any description exc. 1 sqm but not exc. 2 sqm each complete and refixing in same opeing incl easing etc all as specified and directed by Engr-in-Charge. |
| 9 | Taking down chowkhats or frames with shutters (without taking off shutter from the frame) of size n.exc 1.50 Sqm complete all as specified and directed by Engr-in-Charge. |
| 10 | Taking down chowkhats or frames with shutters (without taking off shutter from the frame) of size exc 1.5 Sqm and n.exc 4 Sqm complete all as specified and directed by Engr-in-Charge. |
| 11 | Taking up or down 15mm dia steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified and directed by Engr-in-Charge. |
| 12 | Taking up or down 20mm dia steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified and directed by Engr-in-Charge. |
| 13 | M&L brick work with sub class \\"B\\" old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed by Engr-in-Charge. |
| 14 | M&L for half brick work with subclass ‘B’ bricks, straight or curved on plan to any radius built in CM 1:4 complete all as specified and directed by Engr-in-Charge. |
| 15 | M&L for 25mm thick PCC (1:2:4) type B-0 (using 20mm graded stone aggregate) as in sub base of floor complete all as specified and directed by Engr-in-Charge. |
| 16 | M&L 50mm thick PCC (1:3:6) type C-2 (Using 40mm graded stone aggregate) as in plinth protection /hardstanding , laid in panels, finished the top surfaces even and fair without using extra cement complete all as specified and directed by Engr-in-Charge. |
| 17 | M&L for joint free Non-skid ceramic coloured tiles 7-8mm thick (square/rectangular), area of each tile not exc 0.11 Sqm, over and including 15mm thick screed bed in CM (1:6) in flooring, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed by Engr-in-Charge. |
| 18 | M&L for Glazed ceramic coloured joint free tiles 450x300X7mm in vertical surfaces over and including 10mm thick rendering in Cement mortar (1:4), set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed by Engr-in-Charge |
| 19 | S&F for Glazing with plain sheet glass, ordinary quality, 4mm thick and glazing with oil putty or aluminium or PVC beading in squares not exceeding 0.5 Sq.m in each pane complete in repair all as specified and directed. |
| 20 | S&F in repair 25mm dia drapery rod stainless steel fixed to wall with side domes and brackets complete all as specified and directed by Engr-in-Charge. |
| 21 | S&F Dust/Snake guard aluminium strip in doors of size 40x2mm with rubber at strip bottom complete all as specified and directed by Engr-in-Charge. |
| 22 | M&L 15mm thick rendering in cement mortar (1:6) on brick work or concrete surfaces, finished even and fair without using extra cement complete all as specified and directed by Engr-in-Charge. |
| 23 | M&L 15mm thick rendering cement mortar (1:4) mixed with liquid water proofing compound on brick work or concrete surfaces, finished the surfaces even and fair without using extra cement complete all as specified and directed by Engr-in-Charge. (WPC shall be paid seperately) |
| 24 | M&L for 10mm thick plaster on roof, chajja and roof parapet of CM (1:3) on RCC finished even and smooth without using extra cement etc ncl taking down cement plaster complete all as specified and directed by Engr-in-Charge. |
| 25 | M&L 5mm thick rendering in ceiling of cement mortar (1:3) on fair faces of brick work or concrete surfaces, finished the surfaces even and fair without using extra cement complete all as specified and directed by Engr-in-Charge. |
| 26 | Supply only liquid water proofing compound complete all as specified and directed by Engr-in-Charge. |
| 27 | M&L for three coats of white wash to newly plastered surfaces of ceiling including preparation of surfaces, complete all as specified and directed by Engr-in-Charge. |
| 28 | M&L preparation of new surfaces with wall putty and applying two coat of acrylic distemper over a coat of primer on walls complete all as specified and directed by Engr-in-Charge. |
| 29 | M&L two coats of weather proof emulsion paint Apex of Asian paint equivalent in berger, Nerolac in newly plastered surface over a coat of primer incl preparing the surface with external wall putty complete all as specified and directed by Engr-in-Charge. |
| 30 | M&L for preparation old surfaces of plastered or unplastered old decorated surfaces of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of acrylic distemper on walls including cornices, pilasters etc complete all as specified and directed by Engr-in-Charge. |
| 31 | M&L preperation of old painted plastered or stone surfaces of any description and applying one coat of exterior emulsion paint (Apex) of asian paint or other equivelent as approved incl preparing the surface with external wall putty complete all as specified and directed b Engr-in-charge. Note : The work is required to be carried out upto Double storey building. The cost of scaffolding shall be deemed to be included in the item. The contractor shall also make necessary safety arrangement for labour |
| 32 | M&L for Preparation old decorated surfaces and applying one coat of white wash on ceilings complete all as specified and directed by Engr-in-Charge. |
| 33 | M&L for preparing old steel and iron surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engr-in-Charge. |
| 34 | M&L for preparing old wooden or wood based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engr-in-Charge. |
| 35 | S&F Factory made 100% Solid WPC Brown door Frame (50mm x 100mm Single Rebate) made from 100% LEAD FREE (single extruded process) material with density 780 kg/Cum & Manufactured by an ISO: 9001-2015 certified company, all as per specification drawing as directed by the Engineer-in-Charge. The door frame should be Waterproof, Termite Proof, Fire Retardent and having excellent screw holding capacity complete all as specified and directed by Engineer-in-Charge. |
| 36 | S&F 30mm thick Moulded WPC Brown Factory made 100% Solid door (Conforming as Per IS:4020) made from 100% LEAD FREE single extruded with 2, 4 or 6 raised panel design on the front side with 10mm deep mould on single side with Wood Grain Texture and back side plain with density not less than 600 kg/cum. Manufactured by an ISO: 9001-2015 certified company. The door should be Waterproof, Termite Proof, Fire Retardent and having screw holding capacity complete all as specified and directed by Engineer-in-Charge. |
| 37 | S&F of 100mm long stainless steel butt hinges, medium weight complete all as specified and directed by Engr-in-Charge. |
| 38 | S&F 150mm long, Stainless Steel barrel tower bolts complete all as specified and directed by Engr-in-Charge. |
| 39 | S&F 150mm size Stainless Steel handles, all as directed complete all as specified and directed by Engr-in-Charge. |
| 40 | S&F for GI tubing 15mm bore, medium grade ISI marked with all fittings(such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions, including short lengths etc.) ( heavy grade ISI Marked) , fixed to walls, concealed in wall and ceiling or laid in floor complete complete all as specified and directed. |
| 41 | S&F for GI tubing 20mm bore, medium grade ISI marked with all fittings(such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions, including short lengths etc.) ( heavy grade ISI Marked), fixed to walls, concealed in wall and ceiling or laid in floor complete complete all as specified and directed. |
| 42 | Refixing old steel tubing of 15mm bore and connections in new or old position (walls, ceilings, floors etc.) together with all fittings heavy duty (ISI Marked ) (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.) and fixed complete to walls and ceiling with clips, wall hooks, wooden plugs or laid in floors Complete all as specified and directed |
| 43 | Refixing old steel tubing of 20mm bore and connections in new or old position (walls, ceilings, floors etc.) together with all fittings heavy duty (ISI Marked ) (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.) and fixed complete to walls and ceiling with clips, wall hooks, wooden plugs or laid in floors Complete all as specified and directed |
| 44 | S&F in repair 110mm dia PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in trenches/floor or fixed to wall including necessary clamps complete all as specified and directed by Engr-in-Charge. |
| 45 | S&F in repair PVC connection 15mm bore dia 450mm long with 2 Nos PTMT nuts with washer complete all as specified and directed by Engr-in-Charge. |
| 46 | S&F in repair PVC waste pipe 32/40 mm dia complete all as specified and directed by Engr-in-Charge. |
| 47 | S&F in repair 20mm dia CP tubular towel rail D type 600mm long complete all as specified and directed by Engr-in-Charge. |
| 48 | S&F in repair CP bib tap 15mm bore fancy type screwed for iron pipe complete with wall flange complete all as specified and directed by Engr-in-Charge. |
| 49 | S&F in repair 15mm dia brass chromium plated pillar tap long body with fly nut capstan head screwed for 15mm bore dia of pipe complete all as specified and directed by Engr-in-Charge. |
| 50 | S&F in repair 600x450x5mm thick looking mirror bevelled edge of selected quality glass fixed with stainless steel glass fastner complete all as specified and directed by Engr-in-Charge. |
| 51 | S&F in repair CP health faucet with 1m flexible tube and wall hook complete all as specified and directed. |
| 52 | S&F in repair CP angular stop cock chromium plated fancy type 15mm dia single way and fixed complete all as specified and directed by Engr-in-Charge. |
| 53 | S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed by Engr-in-Charge. |
| 54 | S&F in repair Vitreous china wash hand basin including brackets, white size 550 x 400mm incl cutting cutting for and pinning in ends of brackets. Including Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed complete all as specified and directed by Engr-in-Charge. |
| 55 | S&F in repair 10 Litre capacity PVC low level flushing cistern with ball valve and handle/push button 32mm dia PVC flush pipe including taking down unserviceable cistern complete all as specified and directed by Engr-in-Charge. |
| 56 | S&F in repair Vitreous china wash down water closed pan (Pedestal pattern) white, including connection to drain (or out going pipe) and to flush pipe, antisypthonic (excluding flushing cistern and flush pipe) complete all as specified and directed by Engr-in-Charge. |
| 57 | S&F in repair Vitreous China Urinal, Half stall type, white (including CP spreader and waste pipe) complete all as specified and directed by Engr-in-Charge. |
| 58 | S&F Mild steel in joist, channel, angle, tubular poles, tubular sections fixed independently, conforming to Fe-410W(Gde-E-250) quality-B complete all as specified & directed |
| 59 | S&F Pre-painted galvalume aluminum zinc coated GI based corrugated steel sheet 0.50mm thick of any colour, having tensile strength of 550 Mpa (AZ-150)as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 60 | S&F Pre-painted galvalume aluminum zinc coated GI based plain steel sheet 0.50mm thick of any colour, having tensile strength of 550 Mpa(AZ-150) as in roof covering/cladding to wall, ridge , valley gutter etc fixed with self tapping screws complete all as specified and directed |
| 61 | S&F mild steel work as in trusses, rafters, purlins etc, and the like made out of MS pipe, flat, angle or hollow sections conforming to Fe-410-W (Gde-E-250) quality-A incl all necessary cleats, gusset plates etc complete all as specified and as directed. |
| 62 | S&F Mild Steel Plates(plain or chequered) channels, square cut or notched (ordinary or counter sunk) forming holes, without any attachment conforming to Fe 410W(Gde-E-250) quality-A complete all as specified and as directed. |
| 63 | M&L for preparing new steel and iron surfaces of any description over 10 CM width or girth and applying two coats of synthetic enamel paint of any tint over one coat of red oxide primer complete all as specified and directed by Engr-in-Charge. |
| 64 | M&L for cement concrete 1:2:4 type B1 (Using 20mm graded stone agrregate ) as in bed blocks , coping and similar work complete all as specified and directed by Engr-in-Charge |
| 65 | M&L for cement concrete 1:3:6 type C1 (Using 20mm graded stone agrregate ) as in foundation of posts and similar work complete all as specified and directed by Engr-in-Charge |
| 66 | Cutting openings, through brick walls, or cutting out defective brick work, cutting out brick work for reparir of cracks in brick work and similar work for brick work built in cement mortar or cement lime mortar complete all as specified and directed. |
| 67 | M&L for mild steel TMT bars 10 mm dia and over cut to length, bent to shape rwquired, including cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and directed |
| 68 | ditto but 5 mm dia and over upto and incl 10 mm dia in stirrups, spacers and binders complete all as specified and directed. |
| 69 | M&L for providing reinforced cement concrete type B1 (1:2:4) (20 mm graded aggregate) including form work as in lintel ,seismic and other similar band, in cutting of brick wall for strengthening complete all as specified and directed. |
| 70 | Dismantling and taking down U/S copper / aluminium point wiring (light, fan, socket, power) complete fitting such as switches, ceiling roses, pendants, lamp holder, light fitting etc including CI/Pressed steel terminals, switch box, and making good the disturbed surface of wall/floor etc, to match with the existing surfaces of wall/floor complete all as specified and directed.Note :- If the contractor fail to make good the disturbed surface of wall/floor etc and do not match with the existing surface of wall/floor to the entire satisfaction of Engr-in-Charge a recovery @ of Rs. 50/- per RM will be made from payment due to the Contractor. In case of any dispute the decision of accepting officer will be final and binding. Please Enable Macros to View BoQ information |
| 71 | Dismantling and taking down U/S copper / aluminium point wiring (light, fan, socket, power) complete fitting such as switches, ceiling roses, pendants, lamp holder, light fitting etc including CI/Pressed steel terminals, switch box, and making good the disturbed surface of wall/floor etc, to match with the existing surfaces of wall/floor complete all as specified and directed.Note :- If the contractor fail to make good the disturbed surface of wall/floor etc and do not match with the existing surface of wall/floor to the entire satisfaction of Engr-in-Charge a recovery @ of Rs. 50/- per RM will be made from payment due to the Contractor. In case of any dispute the decision of accepting officer will be final and binding. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysOct 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender