Tender For Additional / Alteration And Special Repair To Certain Buildings At Bagrakote Military Station Under Ge Sevoke Road.
Tender Value
2.66 Crore
Estimated cost
Bid Submission
31 Oct 2026
27 days left
EMD
3.41 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kalimpong → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Additional / Alteration And Special Repair To Certain Buildings At Bagrakote Military Station Under Ge Sevoke Road.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of wrought iron or mild steel work of any description not other wise provided forcomplete all as specified and as directed. |
| 2 | Dismantling plain or corrugated steel sheeting any gauge or thickness as in roof covering complete all as specified and as directed. |
| 3 | Dismantling timber scantling 40 Sqm and over in section any position as in framed works complete all as specified and as directed. |
| 4 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out complete all as specified and as directed. |
| 5 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc. 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed. |
| 6 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc. 25 cm as in any type of soil complete all as specified and as directed. |
| 7 | Removing excavated material (Soils) n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed. |
| 8 | Demolition of bricks work built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed. |
| 9 | M&L for PCC 1:4:8, type D2 (using 40 mm graded agg) as in foundation, filling and mass concrete complete all as specified and as directed. |
| 10 | M&L for Brickwork with fly ash modular bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed. |
| 11 | M&L for Brickwork with fly ash modular bricks, straight or curved on plan to any radius in half brick thick walls built inbuilt in CM 1:4 complete all as specified and as directed. |
| 12 | M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in built in CM 1:4., straight or curved on plan exc 6m mean radius built incomplete all as specified and as directed. |
| 13 | M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4., straight or curved on plan exc 6m mean radius complete all as specified and as directed. |
| 14 | Materials and Labour for Sand filling under floors or in foundation including watering and consolidation complete all as specified and as directed. |
| 15 | M&L for hardcore of guage n exc. 63 mm, deposited, spread and levelled in layersn exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and as directed. |
| 16 | M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, stopped ends etc complete all as specified and as directed.. |
| 17 | S&F mild steel bars TMT bars, 10 mm dia and over, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9 mm dia or securing with clip scomplete all as specified and as directed. |
| 18 | S&F mild steel bars TMT bars, 8 mm dia and over upto and including 10mm dia in stirrups, spacers and binders hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed. |
| 19 | M&L RCC 1:2:4, type B1 (using 20mm graded stone agg) as in lintels upto 1.5m clear span, lintel bands, roof bands and other similar items including necessary form work complete all as specified and as directed. |
| 20 | M&L for 40mm thick cement concrete 1:2:4, type B-0 (using 12.5 mm graded agg) as in damp proof course(DPC) to horizontal or vertical surfaces including necessary formwork complete all as specified and as directed. |
| 21 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in concrete and making good disturbed ground complete all complete all as specified and as directed. |
| 22 | All as per Srl Item No. 21 here-in-above but embeded in below GL complete all as specified and as directed. |
| 23 | Excavating in Post holes (or similar holes) each n exc 0.50 cum, getting out, Returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc. 25cm, watering and removing surplus soil to a distance not exc. 50 m and making good surfaces in soft/loose soil, complete all as specified and as directed. |
| 24 | S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc., including preparation of surface and one shop coat of zinc chromate primer paint at Contractor’s workshop before fabrication complete all as specified and as directed. |
| 25 | S&F pre-painted galvalume aluminium zinc coating GI based semi corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self drilling and self tapping screws, neoprene and limpet washers complete all as specified and directed. |
| 26 | S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self drilling and self tapping screws, neoprene and limpet washers complete all as specified and directed. |
| 27 | S & F for 2mm Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed. |
| 28 | S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed. |
| 29 | S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long, dia of neck 5 to 10 mm, complete all as specified and as directed. |
| 30 | S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 31 | S&F mild steel screw bolt, 11 to 15 mm dia machine made with hexagonal head at one and screwed the other or screwed bolts each screwed and to be fitted with washer and one hexagonal or square nut not exceeding 5 cm long complete all as specified and directed. |
| 32 | S&F Mild steel bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, hooks (stay), heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlines to steel trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed. |
| 33 | S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed. |
| 34 | Taking down chowkats with shutters (without taking off shutters from the frames) area not exceeding 1.50 Sqm each including guard bar, if any complete all as specified and directed. |
| 35 | Taking down chowkats with shutters (without taking off shutters from the frames) area exceeding 1.50 Sqm but not exceeding 4.00 Sqm each complete all as specified and directed. |
| 36 | S&F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, including painting with one shop coat of zinc chromate primer complete with glazing bars, dovetailed or welded complete all as specified and directed. |
| 37 | All as per item No 36 here-in-above, but without glazing bars complete all as specified and directed. |
| 38 | S&F Steel ventilator with top hung shutter including hinges, steel peg stay, including painting with one shop coat of zinc chromate primer complete all as specified and directed. |
| 39 | S&F Chimney bars (straight or camber); bearing bars; tongues or water bars for window frames; window/Ventilator guard bars, plain, let in and fixed independently in steel/wooden frames, L or T section supports for shelves etc. and similar articles conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 40 | S&F framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde-E-165 complete all as specified and directed.. |
| 41 | S&F Pressed steel frames (Size 105 x 60mm) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., including one shop coat of priming complete all as specified. |
| 42 | S&F Pressed steel frames (Size 165 x 60mm) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., including one shop coat of priming complete all as specified. |
| 43 | M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in block for hold fast, filling in frames, copings or similar work and finished the surface with existing and including form work complete all as specified and directed. |
| 44 | S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 45 | S&F 35 mm thick Glazed and skeleton shutter open rebated and prepare to receive glass, gauge etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing gauge etc size of members of shutters as specified in SSR part-I Section 8 and clause 8.24(a) of second class hard wood all as directed.Note : wire cloth, etc. in panels or sash squares shall be measured separately. |
| 46 | M&L for Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snapbeading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. |
| 47 | S&F Factory made Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete after taking down existing u/s frames complete all as specified and directed. |
| 48 | S&F Factory Made Solid PVC Moulded Door Shutter With Particle Board Core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete after taking down existing u/s shutter complete all as specified and directed. |
| 49 | S&F for Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed. |
| 50 | S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 51 | S&F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.00 mm and fixed with tinned tacks or galvanized wire staples including for fixing with beads of panels supplied with joinery complete all as specified and directed. |
| 52 | M&L for 4.8mm Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane |
| 53 | M&L for 4.8mm Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and directed. |
| 54 | S&F 3mm thick glass sheet ordinary quality & glazing with oil putty in square not exc 0.50 Sqm in each pane all as specified & directed. |
| 55 | S&F 125 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 56 | M&L for 150mm Long Extruded aluminium alloy body, anodised,latches complete all as specified and directed. |
| 57 | M&L for 100mm long Aluminium handles, cast type,anodised complete all as specified and directed. |
| 58 | S&F Butt hinges, Size 100 mm heavy weight, cold rolled mild steel and fixed complete all as specified and directed. |
| 59 | S&F 150 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 60 | S&F 150 mm long extruded aluminium alloy handles, fabricated type, anodised of pattern/design as approved complete all as specified and directed. |
| 61 | S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 62 | S&F mild steel 300 mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 63 | S&F 150 mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, including vulcanised rubber piece fixed in floor complete all as specified and directed. |
| 64 | M&L Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover,governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. |
| 65 | S&F powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and as directed. |
| 66 | S&F aluminium locking bolt for aluminium door with bolts not less than 10 mm dia , 100 mm size complete all as specified and as directed. |
| 67 | S&FHarrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed. |
| 68 | Dismantling wall & ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed. |
| 69 | M&L for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate\ channel at 457 mm centre to centre complete all as specified and directed. |
| 70 | M&L for Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified Size of grid 605 x 605 complete all as specified and directed. |
| 71 | M&L for 4mm thick decorative type non asbestos fibre cement building boards fixed or laid/inserted to GI frame work in ceiling flat or sloping, as per IS-14862 and manufactured from homogeneous mixture of cement, quartz and cellulose and cured with high pressure steam using auto claving process complete all as specified and directed. |
| 72 | Supply & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture,design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 4 76 (part 4 ) 1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlockin metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main- T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1 OOOmm length and Lshape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-charge. |
| 73 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 74 | Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15 cm thickness (below or above GL) complete all as specified and directed. |
| 75 | M&L for 75 mm thick cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection & paving finished even & smooth without using extra cement complete all as specified and directed. |
| 76 | M&L for 75 mm thick PCC 1:4:8, type D2, using 40mm graded aggregate in sub-floors, sub-bases, etc. finished even and rough to receive the topping layer complete all as specified and directed. |
| 77 | M&L for 25 mm thick for cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as in sub-floors. |
| 78 | M&L for 20 mm machine cut thick Kota stone slab as in floors laid over and including 20 mm thick screed bed or bedding layer of cement morter (1:6) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing by machine complete all as specified and directed. |
| 79 | M&L for 20 mm thick Kota stone slab as in riser of steps, skirting, dado and pillar laid over cement screed and over and including 10mm thick backing coat in cement mortar (1:3) , complete all as specified and directed. |
| 80 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles with and including 20 mm thick screed bed or bedding layer of cement morter (1:6) for laying of floor finishes complete all as specified and directed. |
| 81 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, as in riser of steps, Skirting etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles surfaces, over and including 10mm thick backing coat in cement mortar (1:3) , complete all as specified and directed. |
| 82 | M & L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including 20 mm thick screed bed or bedding layer of cement morter (1:6) for laying of floor finishes complete all as specified and directed.. |
| 83 | M&L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm as in riser of steps, skirting, dado and pillar laid over cement screed and over and including 10mm thick backing coat in cement mortar (1:3) , complete all as specified and directed. |
| 84 | M&L for coloured Glazed ceramic tiles in vertical surface 350x 250x 7mm / 450x 300x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles surfaces, over and including 10mm thick backing coat in cement mortar (1:3) , complete all as specified and directed. |
| 85 | M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. laid over 15 mm thick cement screed in CM (1:3) complete all as specified and directed. |
| 86 | M&L chequred cement tiles 20cmx20 cm x25 mm thick set in with mixture of white and grey cement in equal proportion and no pigment and pointed in neat cement slury and laid over 15 mm thick cement screed bed (1:4) all as completed and specified and directed. |
| 87 | Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 88 | M&L rendering 15mm thick in CM 1:6 on fair faces of brick/concrete surfaces finished even & smooth w/o using extra cement complete all as specified and directed. |
| 89 | M&L for 15 mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished the surface even and smooth (without using extra cement) complete all as specified and as directed. |
| 90 | Materials and labour for rendering 20mm thick in two layers of 10 mm thick each in cement mortar (1:4) on fair faces of brick work or concrete surfaces,WPC shall be mixed with mortar of top layer, finished even and fair, including curing of plastered surface and cleaning stains and dripping mortar from floors and walls, complete all as specified and directed. Note: WPC shall be measured and paid separately as supply only. |
| 91 | Supply only Liquid water proofing compound. |
| 92 | M&L lnsulated PVC Wall Lining consisting of PVC Insulated Panels having expanded polystyrene (EPS)stuck to 2mm thick plain colour PVC sheet duly fitted into the wall as per specifications and drawing complete all as specified and directed. |
| 93 | M&L for Preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of black bituminous paint over a coat of red oxide primer complete all as specified and directed. |
| 94 | M&L for preparation of new untreated wood and wood base material of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 95 | M&L for preparation of previous steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide/zinc chromate primer complete all as specified and directed. |
| 96 | M&L for preparation of existing steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed. |
| 97 | M&L for preparing new steel and iron surfaces of any description n.exc 10 cm in width or girth and apply two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed. |
| 98 | M&L for Preparing of new plaster surfaces and applying three coat of white wash on walls complete all as specified and directed. |
| 99 | M&L for preparation of new plaster surfaces and applying two coats of cement based paint over a coat of chalk whiting on wall complete all as specified and directed. |
| 100 | M&L for Preparation of new plaster surfaces and applying two coats of distemper oil emulsion of approved colour rolled over one coat of primer over 01 mm thick plaster of paris putty of approved make complete all as specified and directed. |
| 101 | M&L for Preparation of new plaster surfaces and applying two coats of distemper oil emulsion over a coat of primer on wall complete all as specified and directed. |
| 102 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint havingVOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 103 | Providing and fixing factory made UPVC white colour casement (Openable) window made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of'zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) (B) Area exceeding 1.00 sqm but not exceeding 2.00 sqm each complete all as specified and directed. |
| 104 | Taking up or down galvanised steel water tubing 15mm bore from wall/ceiling/floor including all fittings, segregating and stacking the pipes and fittings properly at site for checking complete all as specified and as directed. |
| 105 | All as per Srl I tem No 104 here-in-above, but for 20mm bore complete all as specified and as directed. |
| 106 | All as per Srl I tem No 104 here-in-above, but for 25mm bore complete all as specified and as directed. |
| 107 | S&F 15 mm unplasticised PVC pipes of pressure rating 10 kgf/cm2 with all pipe fittings such as ends, elbows, unions, tees, reducing tees, adoptors, sockets, plugs, hose clips etc. and fixing to walls, ceilings or in floors etc, complete with saddles (snap clips), wall clips, hooks, protective mild steel tube sleeves and cutting through walls, floors and their making good or laying in trenches complete all as specified and as directed. |
| 108 | S&F 20 mm unplasticised PVC pipes of pressure rating 10 kgf/cm2 with all pipe fittings such as ends, elbows, unions, tees, reducing tees, adoptors, sockets, plugs, hose clips etc. and fixing to walls, ceilings or in floors etc, complete with saddles (snap clips), wall clips, hooks, protective mild steel tube sleeves and cutting through walls, floors and their making good or laying in trenches complete all as specified and as directed. |
| 109 | S&F 25mm unplasticised PVC pipes of pressure rating 10 kgf/cm2 with all pipe fittings such as ends, elbows, unions, tees, reducing tees, adoptors, sockets, plugs, hose clips etc. and fixing to walls, ceilings or in floors etc, complete with saddles (snap clips), wall clips, hooks, protective mild steel tube sleeves and cutting through walls, floors and their making good or laying in trenches complete all as specified and as directed. |
| 110 | S&F 20mm bore Outer dia in 3- layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches. all as specified and as directed. |
| 111 | S&F 25mm bore Outer dia in 3- layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches complete all as specified and as directed. |
| 112 | S&F 32mm bore Outer dia in 3- layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches complete all as specified and as directed. |
| 113 | S&F in repair Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe 25mm bore and fixed complete all as specified and as directed. |
| 114 | M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed water tubing and making good, cutting not exc. 10 cm girth complete all as specified and as directed. |
| 115 | S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed. |
| 116 | S&F in repair vitreous china wash hand basin, white, flat back, size 550 x 400 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and as directed. |
| 117 | S&F vitreous china wash hand basin, white, flat back, size 550 x 400 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and as directed. |
| 118 | S & F in repair 32 mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed. |
| 119 | S & F 32 mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed. |
| 120 | S&F in repair 32 mm Low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sq. cm complete all as specified and as directed. |
| 121 | S&F 32 mm Low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sq. cm complete all as specified and as directed. |
| 122 | S & F in repair Vitreous China Urinal, full stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and as directed. |
| 123 | S & F Vitreous China Urinal, full stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and as directed. |
| 124 | S & F in repair 40 mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed. |
| 125 | S & F 40 mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed. |
| 126 | S &F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and as directed. |
| 127 | S & F 40mm Waste pipe Low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sq. cm complete all as specified and as directed. |
| 128 | S&F in repair vitreous china squatting pan orissa pattern size 580x440mm white with integral foot rest and accessories including connection to existing trap, and to flushing pipe, anti-syphonage pipe, etc., setting the trap and pan in cement concrete 1:2:5 and min. 150mm thick all round and finishing just below level of rim of pan to receive the floor finishing, complete all as specified. |
| 129 | S&F in repair Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) complete in all respect all as specified. |
| 130 | S&F Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) complete in all respect all as specified. |
| 131 | S&F in repair PVC valveless, syphonic action type 10 litres flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, fixed complete incl connection to water pipe and PVC 32 mm dia flush pipe etc complete all as specified and as directed. |
| 132 | S&F PVC valveless, syphonic action type 10 litres flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, fixed complete incl connection to water pipe and PVC 32 mm dia flush pipe etc complete all as specified and as directed. |
| 133 | S&F in repair PVC connections, 15 mm size with PTMT nuts of length 600 mm, complete all as directed. |
| 134 | S&F PVC connections, 15 mm size with PTMT nuts of length 600 mm, complete all as directed. |
| 135 | M& L 15 mm bore Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixedcomplete all as specified and as directed. |
| 136 | M&L for Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified |
| 137 | M&L Stop valves 15 mm bore , cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. |
| 138 | M&L Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms) complete all as specified and as directed. |
| 139 | S&F in repairs fancy type Bib taps, cast copper alloy with crutch or butterfly handle with chromium plated , screwed down, screwed for iron pipe of bore 15 mm or for brass ferrule and fixed complete all as specified and as directed. |
| 140 | S&F in repair 15mm bore Fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed hanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed. |
| 141 | S&F 15mm bore Fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed hanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed. |
| 142 | S&F in repair 15 mm bore fancy type, chromium plated stop valve with long shank and cup (concealed type), cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. |
| 143 | S&F 15 mm bore Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed. |
| 144 | S&F in repair shower rose of size 125 mm, chromium plated with or without swivel joint including fixing to steel pipe or union , including taking down existing unserviceable shower rose complete all as specified and as directed. |
| 145 | S & F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 146 | S&F in repair brass chromium plated Tubular towel rail, 20mm dia, D type, 60 cm long between flanges complete all as specified and as directed. |
| 147 | S&F brass chromium plated Tubular towel rail, 20mm dia, D type, 60 cm long between flanges complete all as specified and as directed. |
| 148 | S & F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed. |
| 149 | S & F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 150 | S & F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed. |
| 151 | S & F Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed. |
| 152 | S&F 150 mm Internal Dia DWCPE pipes complete all as specified and as directed. |
| 153 | Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed. |
| 154 | Excavating in trenches exc 1.5 m and not exc. 3.0 m in depth and getting out in hard/dense soil complete all as specified and as directed.. |
| 155 | M&L for PCC 1:3:6 Type C2 using 40 mm graded stone aggregates as in foundations, filling and mass concrete complete all as specified and directed. |
| 156 | M&L Loose filling with broken bricks aggregates of gauge 80 to 150 mm in soakage pits, soakage wells complete all as specified and directed. |
| 157 | S&F mild steel TMT bars 6mm to 8 mm dia, cut to length,bent to shape required, including cranking, bending spirally for hooping for column , hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 158 | Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick for rough finished horizontal or sloping surfaces of concrete complete all as specified and as directed. |
| 159 | M&L for reinforced cement concrete (1:1.5:3) type A1 (nominal mix) using 20 mm graded stone aggregate as in slabs and shelves supported on walls, beams and columns in floors, roofs and landings etc, any thickness complete all as specified and directed. (Note: Steel reinforcement shall be measured & paid separately) |
| 160 | M&L for RCC 1:2:4, type B1 (using 20mm graded stone agg) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 161 | Dismantling water tanks of capacity exc.250 Litre but n exc. 500 Litre complete all as specified and as directed. |
| 162 | Dismantling water tanks of capacity exc. 500 Litre but n exc. 1000 Litre complete all as specified and as directed. |
| 163 | Dismantling water tanks of capacity exc. 1000 Litre but n exc. 2000 Litre complete all as specified and as directed. |
| 164 | S&F rotational moulded polyethylene water storage tank (multilayer quality) cylindrical vertical with closed top of capacity 500 liters hoisted and fixed in position with connecting ports (inlet, outlet and over flows) complete all as specified and as directed. |
| 165 | S&F rotational moulded polyethylene water storage tank (multilayer quality) cylindrical vertical with closed top of capacity 1000 liters hoisted and fixed in position with connecting ports (inlet, outlet and over flows) complete all as specified and as directed. |
| 166 | S&F in repair rotational moulded polyethylene water storage tank (multilayer quality) cylindrical vertical with closed top of capacity 2000 liters hoisted and fixed in position with connecting ports (inlet, outlet and over flows) complete all as specified and as directed. |
| 167 | S&F in repair Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed bore of pipe 25mm complete all as specified and directed. |
| 168 | S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed bore of pipe 25mm complete all as specified and directed. |
| 169 | S&F in repair 25mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed for dia/bore of 25 mm complete all as specified and directed. |
| 170 | S&F 25mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed for dia/bore of 25 mm complete all as specified and directed. |
| 171 | S & F 25mm bore outer dia in PP-R Gate valves (brass insert) as per requirement of the site complete all as specified and directed. |
| 172 | S & F in repair PP-R Gate valves of 32 mm size (brass insert) ISI Marked as per requirement of the site complete all as specified and as directed. |
| 173 | S & F 32mm bore outer dia in PP-R Ball valves (brass insert) as per requirement of the site complete all as specified and directed. |
| 174 | Demolition and breaking up 100mm drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and as directed. |
| 175 | M&Lfor finishing inner surface of PCC drain even and smooth using extra cement or complete etc complete all as specified and directed. |
| 176 | M&L cement concrete 1:4:8 type D-2 concrete bed to drain pipes including packing under against the sides of and completely and haunching the pipes after they are laid and tested, bore or pipe in 100 mm complete all as specified and as directed. |
| 177 | S&F in repairs 75 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 178 | S&F 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 179 | S&F PVC (SWR) bends any radius 110mm bore complete all as specified and as directed.. |
| 180 | S&F PVC (SWR) bends any radius 75mm bore complete all as specified and as directed.. |
| 181 | S&F PVC (SWR), junction single, (Single T) equal or unequal 110mm bore complete all as specified and as directed. |
| 182 | S&F PVC (SWR), junction single, (Single T) equal or unequal 75mm bore. |
| 183 | S & F 75 mm bore PVC (SWR) Vent Cowl complete all as specified & directed. |
| 184 | M&L for plain cement concrete (1:2:4) type B-1, using 20 mm graded stone aggregate as in surface channel and drain complete all as specified and as directed. |
| 185 | M&L for extra for forming fair finished drain or channel 45 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc complete all as specified and as directed. |
| 186 | M&L for precast RCC 1:2:4, type B1 (using 20mm graded crushed stone aggregate) as in cover slabs and set in cement mortar 1:6 including providing necessary form work and mould complete as specified and directed.(Note: Steel reinforcement shall be measured & paid separately) |
| 187 | S&F Modular Septic Tank of Capacity 2000 Ltrs (9 to 10 users) (plastic septic tank) stand alone type Vertical Tank includng all accessories with inlet/outlet sizes of 160mm and lowering into position and fixed to inlet and outlet pipes complete all as specified by the manufacturer complete all as specified and as directed. |
| 188 | S&F Modular Septic Tank of Capacity 5500 Ltrs (9 to 10 users) (plastic septic tank) stand alone type Vertical Tank includng all accessories with inlet/outlet sizes of 160mm and lowering into position and fixed to inlet and outlet pipes complete all as specified by the manufacturer complete all as specified and as directed. |
| 189 | M&LProviding and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed. |
| 190 | M&L Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete. |
| 191 | M&L for PCC 1:2:4 type B1 (using 20 mm graded agg) kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed. |
| 192 | Taking drawn carefully old aluminium/copper point wiring for one light, socket or power etc incl all fitings such as switches sockets, holders, light fittings, fan requlators etc and keeping aside complete all as specified and as directed. |
| 193 | Taking down fan, sealing cable end,dismantling blades and removing fan and blades to store complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 194 | Taking down fan, sealing cable end,dismantling blades and removing fan and blades to store complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 27 daysNov 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 34 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender