Tender For Repair / Maintenance Of Plastering, Brickwork, Roofing, Flooring And Certain B&R Works For Chusul Coy At Aec Training College And Centre Pachmarhi
Tender Value
9 Lakhs
Estimated cost
Bid Submission
23 Oct 2026
19 days left
EMD
18000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hoshangabad → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair / Maintenance Of Plastering, Brickwork, Roofing, Flooring And Certain B&R Works For Chusul Coy At Aec Training College And Centre Pachmarhi
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete in ground floors and pavings not exc 15cm thick complete all as specified and directed by Engineer-in-charge. |
| 2 | Material and labour for 40mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in floor finished even and smooth with out using extra cement, complete all as specified and directed by Engineer-in-charge. |
| 3 | M&L for 25mm thick PCC 1:2:4 type B0 using 12.50mm graded stone aggregate as in floor, including rough finished with out using extra cement, complete all as specified and directed by Engineer-in-charge. |
| 4 | Dismantling of floor, hearth or wall tilling including cement mortor bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-charge. |
| 5 | M & L for non skid coloured ceramic tiles 7 to 8mm thick square / rectangular area of each tile exc 0.11 Sqm but not exc 0.18Sqm as in floor laid over 15 mm thick screed bed in CM 1:6 as in floor etc. set and jointed in neat cement slurry and pointed in coloured cement to match colour tiles complete all as specified and directed by Engineer-in-charge. |
| 6 | M & L for vitrified tiles 8-9 mm thick area of each tile n exc 0.36 Sqm as in floor laid over 15 mm thick screed bed in CM 1:6 as in floor etc. set and jointed in neat cement slurry and pointed in coloured cment to match colour tiles, complete all as specified and directed by Engineer-in-charge. |
| 7 | M & L for Glazed ceramic coloured tiles in vertical surface 350x250x7mm/ 450x300x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering in cm 1:3 complete all as specified and directed by Engineer-in-charge. |
| 8 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed by Engineer-in-charge. |
| 9 | Material and labour for machine cut kota stone slab 20-25 mm thick (of size not less than 55 cm x 55 cm) laid and jointed with grey cement slurry mixed with pigment to match shade of the slab including cutting, waste, rubbing and polishing (Granite finish) over and including cement screed bed 20 mm thick in cement mortar (1:6) base including rubbing and mirror polishing, complete all as specified and directed by Engineer-in-charge. |
| 10 | M & L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete and including 20mm thick screed bed in cement mortar 1:6, laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing complete all as specified and directed by Engineer-in-charge. |
| 11 | Demolition of brickwork built in cement mortar including all quions, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engineer-in-charge. |
| 12 | Material & labour old size brick work with sub class 'B' bricks in CM 1:6 brick straight or curved on plain exeeding 6m mean radius complete all as specified and directed by Engineer-in-charge. |
| 13 | Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed by Engineer-in-charge. |
| 14 | M & L for rendering 15mm thick on other than fair faces of brick or concrete surfaces in cement plaster 1:4 using WPC 3% by weight of cement (WPC to be measured and paid separately) and finished even and smooth (without using extra cement), complete all as specified and directed by Engineer-in-charge. |
| 15 | M & L for rendering 12mm thick in CM (1:6) on brick work or concrete surfaces finishing even and smooth without using extra cement complete all as specified and directed by Engineer-in-charge. |
| 16 | Material and Labour for 5mm thick cement plaster in CM (1:3) to ceiling surface and finished the surface even and smooth without using extra cement complete all as specified and directed by Engineer-in-charge. |
| 17 | Supply only integral water proofing compound of approved brand/make, complete all as specified and directed by Engineer-in-charge. |
| 18 | M & L for preparation of new plastered surface of wall and applying two coats of cement base paint with alkali resistant priming paint complete all as specified and directed by Engineer-in-charge. |
| 19 | M & L for preparation of new plastered surface of wall and applying two coats of distemper oil emulsion over a coat of chalk whiting as a preparatory to distempering complete all as specified and directed by Engineer-in-charge. |
| 20 | M & L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed by Engineer-in-charge. |
| 21 | Taking down Chowkhats or frames exc 1.5 sqm but not exc. 4 sq. m each with shutters (without taking off shutters from the frames), complete all as specified and directed by Engineer-in-charge. |
| 22 | Taking down door chowkats or frames with shutter (without taking out shutter from frame ) area not exc 1.50 sqm, complete all as specified and directed by Engineer-in-charge. |
| 23 | S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube supplying & fixing in opening as per specified & drawing, complete all as specified and directed by Engineer-in-charge. |
| 24 | S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed by Engineer-in-charge. |
| 25 | S&F, Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc.complete as specified, Supplied and Fixed. Size of frame 105x60mm, complete all as specified and directed by Engineer-in-charge. |
| 26 | S&F, Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc.complete as specified, Supplied and Fixed. Size of frame 125x60mm, complete all as specified and directed by Engineer-in-charge. |
| 27 | S&F Butt hinges (ISI marked), medium weight, cold rolled mild steel of size 100 mm, complete all as specified and directed by Engineer-in-charge. |
| 28 | S&F 150 mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed by Engineer-in-charge. |
| 29 | S&F 150 mm extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed by Engineer-in-charge. |
| 30 | S&F125 mm long,aluminium,anodised, barrel tower bolts of extruded section complete all as specified and directed by Engineer-in-charge. |
| 31 | S&F 125 mm size aluminium handles, cast type, anodised complete all as specified and directed by Engineer-in-charge. |
| 32 | S & F in repair 300 mm aluminium alloy, anodised sliding door bolt ISI marked with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete all as specified and directed by Engineer-in-charge. |
| 33 | M&L Aluminium powder coated (powder coated of requried colour) three track sliding windows frame top & sides of size 92x31.75x1.50 mm (section No 20831), bottom size 92x31.75x1.50mm (section No 20832) and shutter top & bottom of size 40x18x1.55mm (section No 20736) and sides (handle) of size 40x18x1.55mm (section No 20738) and lock side shutter frame of size 40x18x1.45mm ( section No 20737)\\" with including and fixing rubber gasket, beading and locking arrangement including making good to the disturbed portion complete including & fixing stainless steel wire mesh 0.36mm nominal dia of wire with 1.40mm average aperture and fixed with stainless steel wire staples and including and fixing 5mm thick glass with necessary rubber beading gasket etc including necessary plaster, painting ,cill and making good to disturbed portion complete all as specified and directed by Engineer-in-charge. |
| 34 | S&F aluminium powder coted ventilator louvers type frame top and bottom of size 31x42x1.60mm(sec no-20558) rectaular tube of size 40x20x2 mm (sec no-14019 and middle verticalof size 42x46.20x1.60mm sec(20560) and clip for fixing wiremesh and glass of size 19x17.30x0.90mm (sec no-19360)thick including and fixing stainless steel wire cloth 0.36mm niminal dia of wire and 1.40mm average width of aperature and fixed with stainless steel wire staples and supply and fixing 5mm thick louvers with blades of 100 mm heavy duty with neccessary rubber beading ,gasket etcincluding necessary plaster, painting ,cill and making good to disturbed portion complete all as specified and directed by Engineer-in-charge. |
| 35 | Supply and fixing factory made flush shutters 40 mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides, ISI marked complete all as specified and directed by Engineer-in-charge. |
| 36 | S & F 35 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc fitted to chowkhats for doors etc complete all as specified and directed by Engineer-in-charge. |
| 37 | Dismantling wall and ceiling board or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified and directed by Engineer-in-charge. |
| 38 | M&L for suspended false ceilling comprising of 6mm thick non asbestos fibre cement bulding boards fixed or laid/inserted to GI frame work with screws over Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed by Engineer-in-charge. |
| 39 | Dismantling water tanks of capacity exc 250 & n exc 500 litres and removing to store complete all as specified and directed by Engineer-in-charge. |
| 40 | Dismantling water tanks of capacity exc 500 & n exc 1000 litres and removing to store complete all as specified and directed by Engineer-in-charge. |
| 41 | S&F 500 Ltrs capacity PVC Rotational Moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layer hoisted and fixed in position complete all as specified and directed by Engineer-in-charge. |
| 42 | S&F 1000 Ltrs capacity PVC Rotational Moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layer hoisted and fixed in position complete all as specified and directed by Engineer-in-charge. |
| 43 | S&F in repair ball valve/float ball high pressure of PTMT 20mm with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed minimume weight 210 gm etc complete all as specified and directed by Engineer-in-charge. |
| 44 | Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed by Engineer-in-charge. |
| 45 | Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed by Engineer-in-charge. |
| 46 | Supply and fixing steel water tubing of 15 mm bore, medium grade galvanized with provision of all new fittings as required, laids in floor , wall and on ceiling, complete all as specified and directed by Engineer-in-charge. |
| 47 | Supply and fixing steel water tubing of 20 mm bore, medium grade galvanized with provision of all new fittings as required, laids in floor , wall and on ceiling, complete all as specified and directed by Engineer-in-charge. |
| 48 | S & F in repairs bib taps 15mm dia fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engineer-in-charge. |
| 49 | S & F in repairs 15mm dia stop valves / angle cock fancy type chromium plated, screwed down, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engineer-in-charge. |
| 50 | S & F in repairs 15mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed by Engineer-in-charge. |
| 51 | S & F in repairs 15mm dia brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed by Engineer-in-charge. |
| 52 | Supply and fixed (in repair) PVC connections 45cm long and 15mm dia with chromium plated brass nuts and PVC washers on both ends, complete all as specified and directed by Engineer-in-charge. |
| 53 | S & F in repairs vitreous china wash basin, white flat back, size 550 X 400 mm excluding taps, chain and plug and porcelain stopper but including brackets, waste coupling, waste pipe etc complete all as specified and directed by Engineer-in-charge. |
| 54 | S & F in repairs vitreous China Water closet squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including provision of lime concrete bedding complete all as specified and directed by Engineer-in-charge. |
| 55 | S & F in repairs PVC valveless, syphonic action type, flushing cistern of 10 ltrs capacity, high or low level, white, with inlet, ball valve, float and handle including brackets, and connections to flush pipes of polyethylene of low or high density or PVC. 32 mm dia, for low levelcistern complete all as specified and directed by Engineer-in-charge. |
| 56 | S & F in repairs 600mm X 450mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed by Engineer-in-charge. |
| 57 | S & F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws embedded in the wall complete all as specified and directed by Engineer-in-charge. |
| 58 | S & F in repairs 20 mm dia brass chromium plated tubular towel rail, D type, 60cm long between flanges complete all as specified and directed by Engineer-in-charge. |
| 59 | Taking down AC/PVC pipes (including all fittings), with spigot and socket ends and lead joints including burning out joints of 100/75 mm dia pipe, complete all as specified and directed by Engineer-in-charge. |
| 60 | S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specified and directed by Engineer-in-charge. |
| 61 | S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specified and directed by Engineer-in-charge. |
| 62 | M/L PVC(SWR) bend of 110mm dia of any radius etc complete all as specified and directed by Engineer-in-charge. |
| 63 | S&F PVC (SWR) bends any radius provided with access door of 75 mm dia, complete all as specified and directed by Engineer-in-charge. |
| 64 | Hacking out old glass (any thickness,size,quality or description)from wooden frames or stone,concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed by Engineer-in-charge. |
| 65 | Supply and Fix plain sheet glass/pin headded glass of 4 mm thick in Squares not exceeding 0.50 Sqm in each pane with oil putty and clips complete all as directed by Engineer-in-Charge. |
| 66 | S&F in repairs galvanised mild steel wire cloth, 0.56mm nominal dia wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staple,wooden beads or galvanised steel small nut and bolts etc, complete all as specified and directed by Engineer-in-charge. |
| 67 | Supply and fixing in repair stainless steel plate rack 1mm thick of size 900 x 900 x 200 mm weighing not less than 7.5 Kg each fix with stainless steel screw to wall, complete all as specified and directed by Engineer-in-charge. |
| 68 | S & F in repairs stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engineer-in-charge. |
| 69 | S&F for in repair Brass chromium plated shower rose 125mm size Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union, complete all as specified and directed by Engineer-in-charge. |
| 70 | S&F in repair C.P. grating 100mm square/round with or without hole, complete all as specified and directed by Engineer-in-charge. |
| 71 | Supply and fixing (in repair), PVC waste pipe for wash hand basin/sink, 32mm dia and 80 cm long plain pipe, complete all as specified and directed by Engineer-in-charge. |
| 72 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed by Engineer-in-charge. |
| 73 | S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/clading to wall, fixed with self tapping screws as specified including dismantling plain or corrugated steel sheeting, any gauge, thickness, in roof covering complete all as specified and directed by Engineer-in-charge. |
| 74 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engineer-in-charge. |
| 75 | M&L Framed work such as grills, gratings, etc.. with ends of barsshouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming toto Fe.290.Gde-E-165 including tading down old unserviceable complete all as specified and directed by Engineer-in-charge. |
| 76 | Dismantling timber scantlings frame work under 40 sq. cm in section, in anyposition complete all as specified and directed by Engineer-in-charge. |
| 77 | M&L for 2nd class hard woork exc 13 Sqcm and not exc 25 Sqcm Plain fillets square, rectangular or triangular in section, wrought, secured with nails or brads complete all as specified and directed by Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysOct 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender