Tender For Special Repairs To Bldgs No P-67, P-68, P-69, & P- 70 Govt Md Accn Of Records Meg & Centre Under Ge (North) Bangalore
Tender Value
1.31 Crore
Estimated cost
Bid Submission
31 Oct 2026
27 days left
EMD
2.06 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Bldgs No P-67, P-68, P-69, & P- 70 Govt Md Accn Of Records Meg & Centre Under Ge (North) Bangalore
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof covering etc., complete all as specified and as directed. |
| 2 | Dismantling wrought iron or mild steel work of any description not otherwise provided for etc., complete all as specified and as directed. |
| 3 | Demolition of cement concrete and paving not exc 15 cm thick (below or above ground level) complete all as specified and as directed. |
| 4 | Demolition of Reinforced Cement Concrete (reinforcement cut as required to facilitate demolition) of any description & in any position not specifically provided for complete all as specified and as directed. |
| 5 | Taking down chowkats or frames with shutters (without taking off shutter from frames) area not exc. 1.5 sqm each and making good the disturbed surface to match with adjoining surface etc., complete all as specified and as directed. |
| 6 | Taking down chowkats or frames with shutters (without taking off shutter from frames) area exc. 1.5 Sqm but not exc 4 Sqm each and making good the disturbed surface to match with adjoining surface etc., complete all as specified and as directed. |
| 7 | Taking down cement plaster of any description hacking for key or raking out joint on old brick work / stone / concrete surface etc complete all as specified and as directed. |
| 8 | M&L for Rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe 410 -W (Gde- E- 250) quality -A, etc., complete all as specified and as directed. |
| 9 | S&F Steel work in tubular trusses including special shaped washer using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 etc., complete all as specified and as directed. |
| 10 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA, 150AZ as in roof covering/ cladding to wall, fixed with self tapping screws etc., complete all as specified and as directed |
| 11 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA, 150AZ as in roof covering/ cladding ridges under valley to wall, fixed with self tapping screws etc., complete all as specified and as directed. |
| 12 | M&L for 75 mm thick plain cement concrete (1:4:8) type D- 2 using 40mm graded crushed stone aggregate as in sub base to flooring etc., complete all as specified and as directed. |
| 13 | M&L for 25 mm thick plain cement concrete (1:2:4) type B-0 using 12.5 mm graded crushed stone aggregates as in sub base to flooring etc., complete all as specified and as directed. |
| 14 | M&L for 75 mm thick PCC (1:3:6) type C-1 using 20 mm graded crushed stone aggregates as in plinth protection etc., finished even and smooth without using extra cement including filling sealing compound grade A in crumple joint etc., complete all as specified and directed. |
| 15 | M & L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15 mm thick screed bed in CM (1:6) including dismantling existing floor etc., complete all as specified and as directed. |
| 16 | M & L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in skirting / dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 10 mm thick backing coat in CM (1:4) including dismantling existing wall tile/ skirting etc., complete all as specified and as directed. |
| 17 | M & L for Non - skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15 mm thick screed bed in CM (1:6) including dismantling existing floor etc., complete all as specified and as directed. |
| 18 | M&L for Glazed ceramic coloured tiles of size 300X450X7mm thick as in skirting / dado, set and jointed in neat cement slurry and pointed in white or colour cement to match over & including backing coat 10 mm thick in CM (1:3) including dismantling existing wall tiling / skirting etc., complete all as specified and as directed. |
| 19 | M&L for 18 to 20mm thick Green Marble (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including grinding the exposed edges half round and polishing over & including 15mm thick screed bed in CM (1:6) and including dismantling existing floor etc., complete all as specified and as directed. |
| 20 | S&F for Cement concrete designer chequered tiles of size 20cm x 20cm x 25mm thick exterior grade, coloured glossy finish rubber pressed, set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles over and including Screed bed 15mm thick in CM (1:6) including demolition of existing stone slab (Laid bedded and pointed in any mortar) etc., complete all as specified and as directed. |
| 21 | M&L for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips etc complete all as specified and as directed. |
| 22 | M&L for TMT bars 5mm dia and over upto and including 10mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips as in stirrups, spacers and binders etc., complete all as specified and as directed. |
| 23 | M&L for Pre-cast Cement concrete (1:3:6) type C-1 using 20 mm graded crushed stone aggregates as in solid block masonary exc 10 cm width and setting in CM (1:6) including demolition of brick Work / Stone Masonry / PCC block masonry built in cement mortar of any description all as specified and as directed. |
| 24 | M&L for Providing Precast cement concrete (1:2:4) type B-1 using 20 mm graded crushed stone aggregates as in landings, cover slabs (for man holes) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in CM (1:6) etc complete all as specified and as directed. |
| 25 | M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for rough finished flat surface of concrete complete all as specified and as directed. |
| 26 | M&L for RCC (1:2:4) type B-0 using 12.5 mm graded crushed stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span etc., complete all as specified and as directed. |
| 27 | S&F Factory made Pressed steel frame of profile size 125 X 60 mm using 1.25mm thick M S sheet for door with one ore more rebate includings necessary fixing lugs, hinges, locks strike plate etc complete all as specified and as directed. |
| 28 | S&F Factory made pressed steel frame of profile size 105 X 60 mm using 1.25 mm thick sheet for door with one ore more rebate includings necessary fixing lugs, hinges, locks strike plate etc complete all as specified and as directed. |
| 29 | M&L for Plain cement concrete (1:3:6) type C-1 using 20mm graded crushed stone aggregate as in hold fast and filling of pressed steel chowkat or similar work including necessary formwork etc complete all as specified and as directed. |
| 30 | M&L for Mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars;barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290 Gde-E-165 etc., complete all as specified and as directed. |
| 31 | S&F 35mm thick flush shutter solid core construction with decorative choice lamination both sides of shutter, kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 32 | S&F Factory made second class hard wood 35 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges offraming plain, chamfered or rounded. fitted with cut and mitered beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) etc complete all as specified and as directed. |
| 33 | S&F in repairs 18/19mm thick Block boards, grade 1 quality, exterior grade, commercial type, Water proof, termite proof, fixed with screws to timber frame-work as in cub board shutter, shelves etc complete all as specified and as directed. |
| 34 | S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification etc complete all as specified and as directed. |
| 35 | S&F Factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (Stiles) with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face and 2mm plain colour PVC sheet on back face etc., complete all as specified and as directed. |
| 36 | S&F Powder Coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete shall as specified and as directed. |
| 37 | S&F Powder Coated (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc., complete all as specified and as directed. |
| 38 | S&F 4mm thick sheet glass of ordinary quality and glazing with oil putty or wooden beading to wooden frame or steel frame in squares not exc 0.50 sqm in each pane complete all as specified and as directed. |
| 39 | S&F 4mm thick sheet figured glass, pin head type and glazing with oil putty in squares not exc 0.5 sq.m in each pane etc., complete all as specified and as directed. |
| 40 | S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainles steel wire stapel etc., complete all as secified and as directed. |
| 41 | S&F Aluminium anodised tower bolt 200 mm long of extruded section etc complete all as specified and as directed. |
| 42 | S&F Butt hinges 100mm long 2.5mm thick stainless steel 302 grade, complete all as specified and as directed. |
| 43 | S&F 150 mm long aluminium handle, cast type, anodised etc complete all as specified and as directed. |
| 44 | S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, 150 mm long cover plate, fixed in floor etc., complete all as specified and as directed. |
| 45 | S&F Aluminium Hasp and staple 100 mm size, safety type, mild steel hinge pin including bolt to hinge plate and fixed with screws etc complete all as specified and as directed. |
| 46 | S&F Aluminium alloy, anodised sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy etc complete all as specified and as directed. |
| 47 | S&F in repair sinks made of stainless steel 1mm thick sheet, overall size 495mm x 420mm & bowl size 410mm x 330mm x 160mm etc for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, complete all as specified and as directed. |
| 48 | S&F in repairs European type Water Closet, Pedestal pattern, ivory colour of size 480 x 370 x 420 mm with & including normal closing seat cover, S trap including connection to out going pipe, flushing pipe etc., complete all as specified and as directed. (Make : Prayag cat No 4018 of of equlavent make of Cera of given in approved list of make of tender and as approved by GE) |
| 49 | S&F in repairs vitreous china wash basin, white colour flat back size 550x400mm with G I bracket, waste fitting brass chromium plated with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, PVC waste pipe 75 cm long complete all as specified and as directed. |
| 50 | S&F in repairs PVC low level dual flushing cisrern 10 Ltr capacity, white colour, valveless with flushing out valve with inlet ball valve, float, flushing bend & handle including brackets & connection to pipe etc., including PVC connection 15mm dia 450 mm long with PTMT nuts complete all as specified and as directed. (Make : Prayag Cat No 502 or equivalent make specified in P S herein after and as approved by GE) |
| 51 | S & F in repair Bib tap 15mm dia long body, brass chromium plated with CP flange fixed to pipe etc., complete all as specified and as directed. (Make : Prayag Cat No. 6808 or equivalent make specified in P S herein after and as approved by GE) |
| 52 | S&F in repairs wall mixer for mixing hot and cold water 15mm dia, Brass chromium plated, \\"L\\" Bend with wall flange (Provision for overhead shower) screwed down for iron pipe and fixed complete all as specified and directed.(Make : Prayag cat No. 6875 or equivalent make specified in P S herein after and as approved by GE) |
| 53 | S & F in repairs Centre hole Basin mixture without Pop Up 15 mm dia, brass chromium plated, fixed to pipe complete all as specified and as directed.(Make : Cat No 6850 or equivalent make specified in P S herein after and as approved by GE) |
| 54 | S & F in repairs Sink mixture with regular spout with flange, wall mounted 15 mm dia, brass chromium plated fixed to pipe all as specified and as directed.(Make : Prayag Cat No 6855 or equivalent make specified in P S herein after and as approved by GE) |
| 55 | S & F in repairs angle cock 15mm dia cast copper alloy chromium plated, screwed down high pressure with capstan head handle screwed both ends or for unions etc., all as specified and as directed. |
| 56 | S&F in repairs Glass Shelf size 500 x 125mm, unbreakable fixed to wall complete all as specified and directed. (Make : Prayag cat No. 191 C or equivalent make specified in P S herein after and as approved by GE) |
| 57 | S&F in repairs Corner Glass Shelf 300mm (Brass Bracket), brass CP guard wire etc unbreakable fixed to wall complete all as specified and directed.(Make :Prayag cat No Cat No. 192-CA or equivalent make specified in P S herein after and as approved by GE) |
| 58 | S&F in repairs Soap dish chromium plated brass fixed to wall complete all as specified and directed.(Make : Prayag cat No BA-45 or equivalent make specified in P S herein after and as approved by GE) |
| 59 | S&F in repairs ABS Overhead Shower with SS Arm and Flange 100mm with Stainless steel Arm 225mm & flange including fixing to pipe 15mm dia or union complete all as specified and as directed. (Note : Prayag cat No BS-73SS or equivalent make specified in P S herein after and as approved by GE) |
| 60 | S & F in repairs Looking Mirror of size 600x450, 6mm thick with PVC frame, fixed on wall with brass screw complete all as specified and as directed. |
| 61 | S&F in repairs PVC Mirror cabinet of size 400x500 mm with sufficient compartment suitable to bathroom etc., fixed on walls complete all as specified and as directed. (Make : Prayag Cat No 554 or equivalent make specified in P S herein after and as approved by GE) |
| 62 | S&F in repairs stainless steel plate rack of size 800mm x 600mm made of 0.63mm thick S S sheet, fixed on wealls complete all as specified and as directed. |
| 63 | S & F in repairs Towel rail stainless steel glossy finish 600mmm long fixed von wall complete all as specified and as directed.(Make : Prayag cat No-BA10S or equivalent make specified in P S herein after and as approved by GE) |
| 64 | S&F in repairs Towel ring Brass chromium plated glossy finish, fixed on walls complete all as specified and directed.(Make : Prayag cat No BA-02 or equivalent make specified in P S herein after and as approved by GE) |
| 65 | S&F in repairs Health faucet, brass body with 1mtr S S braided tube & wall hook complete all as specified and as directed.(Make : Prayag cat No. BEA-41 or equivalent make specified in P S herein after and as approved by GE) |
| 66 | S&F in repairs Bib Cock 2 way double handle, brass chromium plated with CP wall flange, 15mm dia bore fixed to pipe complete all as specified and as directed. (Make : Prayag cat No.6812 or equivalent make specified in P S herein after and as approved by GE) Please Enable Macros to View BoQ information |
| 67 | S&F in repairs Bib Cock 2 way double handle, brass chromium plated with CP wall flange, 15mm dia bore fixed to pipe complete all as specified and as directed. (Make : Prayag cat No.6812 or equivalent make specified in P S herein after and as approved by GE) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 27 daysNov 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 34 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender