Tender For Special Repair To Bldg No P-39 (Or Md Accn) At Vasanth Enclave Under Ge (North) Bangalore.
Tender Value
76.70 Lakhs
Estimated cost
Bid Submission
31 Oct 2026
1 days left
EMD
1.40 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Bldg No P-39 (Or Md Accn) At Vasanth Enclave Under Ge (North) Bangalore.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down of existing Water Proofing treatment of any type i.e., APP Membrane, Cement or earthen tile, Mud phuska or lime concrete etc., including cement plaster of any thickness and removing bitumen coating / mud pushka dirts etc., upto appearance of original RCC roof slab by grinding, Picking, sweeping clean and washing down with water to remove dust to facilitate providing water proofing treatment including removing debris outside MoD land complete all as specified and as directed. |
| 2 | M&L for Plain cement concrete (1:2:4) type B-0 using 12.5mm graded crushed stone aggregate as in copings, parapets and railing upto 60cm height, levelling concrete for Roof slab, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including demolition of any description and in any position not otherwise specifically provided for & removal of debrisoutside the MoD land complete all as specified and as directed. |
| 3 | M & L for Water proofing treatment over RCC roof slab with following specification complete all as specified and as directed :-(i) Removing all loose gravel, dirt, oil, grease and foreign materials by jet or dry air, cleaning the surfaces mechanically or by grinding to make the surface smooth(ii) Screed bed / rendering 10mm thick in CM (1:3) mixed with approved liquid water proofing compound as per manufacturers instructions (iii) Applying compatible oil bound bitumen primer @ 0.40 Kg/Sqm |
| 4 | (iv) Laying 3 mm thick APP modified water proofing membrane weighing not less than 3.8 kg/sqm reinforced with non woven polyester matt weighing not less than 150 gm /sqm having softening point not less than 140 centigrade, having tensile strength of 650N/sqm and 350 N/sqm in longitudinal and transverse directions respectively of the reinforced tearing strength of 180N by torch application with minimum 10cm side overlap and 15cm end lap.(iii) Applying solar reflective bituminious aluminium paint @ 0.10 Kg/Sqm.(iv) Pond test for 72 hours shall be carried out for dampness / leakage test. |
| 5 | Supply only liquid water proofing compound, ISI marked, complete all as specified and as directed. |
| 6 | Disconnecting existing PVC water tank of capacity exc 250 & not exc 500 litres including necessary connections, setting aside or lowering for repairs, cleaning, etc. and hoisting, reconnecting and re-fixing in position complete all as specified and as directed. |
| 7 | M& L for 500litres capcity retaional moulded, triple layer polythene water storage tank (cylidrical vertical with closed top) noisting and fixed in position on roofs including 20mm dia ball valve and fittings including dismantlig existing water storage tank complete all as specified and directed. |
| 8 | Supply & fixing 20 mm outer dia CPVC pipes SDR 11, Plain CPVC SDR 11 fittings on walls / ceiling or laying in floors including all fittings and specials including taking down 15 mm dia GI tubing and connections complete all as specified & as directed. |
| 9 | Supply & fixing 25 mm outer dia CPVC pipes SDR 11, Plain CPVC SDR 11 fittings on walls / ceiling or laying in floors including all fittings and specials including taking down 20 mm dia GI tubing and connections complete all as specified & as directed. |
| 10 | S&F in repairs 20mm dia CPVC gate valves, with lever , screwed both ends for iron pipe and fixed complete all as specified & as directed |
| 11 | S&F in repairs 25mm CPVC gate valves, with lever , screwed both ends for iron pipe and fixed complete all as specified & as directed |
| 12 | S & F in repair 75 mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including necessary fittings all as specified and as directed. |
| 13 | S & F in repair 110 mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including necessary fittings all as specified and as directed. |
| 14 | S&F in repair 75mm dia PVC (SWR) junction single(single T) equal or unequal with access door all as specified and as directed. |
| 15 | S&F in repair 110mm dia PVC (SWR) junction single(single T) equal or unequal with access door all as specified and as directed. |
| 16 | S&F in repair 75mm dia PVC (SWR) Bends with access door of any radius all as specified and as directed. |
| 17 | S&F in repair 110mm dia PVC (SWR) Bends with access door of any radius all as specified and as directed. |
| 18 | S&F in repair 75mm dia PVC(SWR) vent cowl all as specified and as directed. |
| 19 | S&F in repair 110mm dia PVC(SWR) vent cowl all as specified and as directed. |
| 20 | S & F in repair 75mm dia outlet PVC(SWR) floor trap, plain with grating including jointing with slvent cement all as specified and as directed. |
| 21 | S&F in repair Vitreous China wash basin, white, flat back, size 550x400mm including cutting for and pinning in ends of brackets or erecting stand all as specified and as directed :-(i) Pillar tap 15mm dia brass chromium plated fancy type fixed to pipe(ii) brass waste coupling 32 mm dia fixed to WHB(iii) PVC connection 15mm dia - 02 Nos 600 mm long with PTMT nuts |
| 22 | S&F in repair Vitreous china wash down water closet pan ( pedestral Pattern) white, fixing to flush pipes to pedestal pan with all joints including following accessories complete all as specified and as directed :-(i) PVC valveless, syphonic action type, flushing cistern 10ltr capacity, low level, white, with inlet, ball valve, float and handle etc complete(ii) Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device(iii) PVC connection 15mm dia 450mm long with PTMT nuts etc. |
| 23 | S&F in repairs wall mixer 15mm dia for mixing hot and cold water, Brass chromium plated, provn for shower arrangement screwed down for iron pipe 15mm dia and fixed complete all as specified and as directed. |
| 24 | S&F in repairs stop valves/ angle valves 15mm dia cast copper alloy, screwed down, high pressure, fancy type,chromium plated screwed both ends for iron pipe 15mm dia or for unions and fixed complete all as specified and as directed. |
| 25 | S&F in repairs two way bib cock with angle valve combination 15mm dia , brass chromium plated, fixed to iron pipe 15mm dia complete all as specified and as directed. |
| 26 | S & F in repairs bib tap long body 15mm dia, brass chromium plated with CP flange, fixed to iron pipe 15mm dia compelte all as specified and as directed. |
| 27 | S & F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 28 | S & F in repairs Towel rail stainless steel glossy finish, 600mm long D - type 20mm dia complete all as specified and as directed. |
| 29 | S&F in repairs shower rose 125mm dia, brass chromium plated with swivel joints fixed to iron pipe 15mm dia complete all as specified and as directed. |
| 30 | S&F in repairs Soap dish brass chromium plated all as fixed in wall as per manufacturers instruction complete all as specified and as directed. |
| 31 | S&F in repairs PVC Mirror cabinet of size 400x500 mm, compartmentalised, fixed on walls complete all as specified and as directed. |
| 32 | S & F in repairs Towel ring stainless steel glossy finish circular type minimum 5mm thick and 15cm dia, fixed to wall complete all as specified and as directed. |
| 33 | S & F in repair kitchen sink with drainage board made of stainless steel 1mm thick kitchen or laborotry with plugs, washers and wastes including bedding in mortar on to dwarf wall or including fixing cantilever brackets and connecting union pipes overall size 915x460mm, bowl size 410x330x160mm complete all as specified and as directed. |
| 34 | S&F in repairs stainless steel plate rack, made of 0.63mm thick S S sheet, overall size 800mm x 600mm, fixed on walls complete all as specified and as directed. |
| 35 | Dismantling of structural steel work including doors, gates but (excluding framed truss) etc omplete all as specified and as directed. |
| 36 | S&F Mild steel framed work as in doors or gates of angle or other sections with gusset plates, rails braces, etc complete drilled for fixing of steel sheeting or other covering, doors etc, to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings(exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing complete all as specified and as directed |
| 37 | S & F 1.25 mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and as directed. |
| 38 | M & L for Mild steel framed work such as railing , grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed. |
| 39 | M & L for Preparation of new steel or iron surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 40 | Taking down cement plaster of any description including raking out joints, hacking for key and removing debris out side MD land all as specified and as directed. |
| 41 | Demolition of brick/stone/boulder /precast concrete articles and precast concrete block built in cement mortar etc complete all as specified & as directed. |
| 42 | M&L for Pre-cast cement concrete (1:3:6) type C-1 using 20mm graded crushed stone aggregate as in solid block masonry exc 10cm in width and setting in CM (1:6) complete all as specified & as directed. |
| 43 | M&L for Rendering 10mm thick CM (1:6) on brick or concrete surfaces, finished even and smooth without using extra cement complete all as specified & as directed. |
| 44 | M&L for rendering 15mm thick in cement mortar (1:4) on other than fair faces of brick work or concrete surfaces, mixed with WPC, finished even and smooth without using extra cement complete all as specified & as directed. (Note :- WPC will be measured and paid separately) |
| 45 | M&L for Rendering 5 mm thick CM (1:3) on ceiling concrete surfaces, finished even and smooth without using extra cement complete all as specified & as directed. |
| 46 | M&L for Dubbing out average 15 mm thick on irregular face of walls/RCC chajjas, facia etc surfaces complete all as specified and as directed. |
| 47 | M & L for Preparation of new plastered ceiling surfaces including in narrow widths/ bands etc., and applying three coats of white wash complete all specified and as directed. |
| 48 | M & L for Preparation of newly plastered surfaces of wall/chajjas etc including filling the minor racks etc with crack filling material all as per manufacturers instructions and applying two coats of Anti-fungal weather proof grade exterior acrylic emulsion paint of approved tint over a coat of weather proof primer complete all as specified and as directed. |
| 49 | M & L for Preparation of newly plastered wall surfaces including in narrow widths/ bands etc., and applying two coats of Acrylic emulsion distemper over a coat of self primer complete all specified and as directed. |
| 50 | Taking down chowkat (without taking of shutter from the frame) area not exc 1.5 sqm each including making good the disturbed surfaces to match with the adjoining surfaces etc complete all as specified and as directed |
| 51 | Taking down chowkat (without taking of shutter from the frame) area exc 1.5sqm but not exc 4sqm each including making good the disturbed surfaces to match with the adjoining surfaces etc complete all as specified and as directed |
| 52 | Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm each all as specified and as directed |
| 53 | M & L for Pressed steel frames made of 1.25mm thick MS sheet, profile size 125x60mm for door and window frames with double rebate including lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified & as directed. |
| 54 | M & L for Plain cement concrete (1:3:6) type C-0 using 12.50mm grade crushed stone aggregate for filling in steel door frame / box type steel window /ventilator etc,.including necessary formwork complete all as specified & as directed. |
| 55 | S&F Second class hard wood 35 mm thick glazed and skeleton shutters open rebated and prepared to receive glass, gauze,etc., without sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, size of members of shutters as specified in SSR Part-1, Section 8, clause 8.24 (a) kiln seasoned and chemically pressure treated complete all as specified and as directed |
| 56 | S&F Flush door shutters 35mm thick, factory made as per IS:2202 (Part-I 1999) solid core construction, with block board core with commercial face on both side fixed to chowkhats all as speified and as directed |
| 57 | S&F Solid PVC door frame (Single rebated) of size 60 mm x 30 mm made out of solid foam with homogenious fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100x8 sheet metal CSK screws complete all as specified and directed (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) |
| 58 | M & L for Factory Made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification complete all as specified and as directed |
| 59 | M&L for Preparation new wooden surface of any description, not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified and as directed |
| 60 | M & L for powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc., complete all as specified & as directed. |
| 61 | M & L for Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings will be paid separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified & as directed. |
| 62 | S&F Anodised aluminum powder coated (of any shade/colour as approved by GE ) ventilators of size 500x500 mm with adjustable 4mm thick figured glass louvers, fixed in half portion, without sash bars, aluminum section weighing 0.55 kg/m including necessary jointing cleats, glazing clips, rubber packing, anodised aluminum snap beading, screws, including stainless steel wire cloth 0.36 nominal dia of wire and average width of aperture 1.18mm etc., complete all as specified and as directed. |
| 63 | M & L for Powder coated aluminium grill ( powder coated or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame, not less than 2.5kg /sqm, with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement all as specified and as directed |
| 64 | Supply & fix Sheet glass 4mm thick ordinary quality and glazing with oil or in wooden /steel /aluminium /rubber beading putty in square exceeding 0.5 Sqm in each pane and all as specified and as directed |
| 65 | Supply & fix Sheet glass 4mm thick ordinary quality and glazing with oil putty or in wooden /steel /aluminium /rubber beading in square not exceeding 0.5 Sqm in each pane all as specified and as directed |
| 66 | Supply & fix stainless steel wire cloth 0.36mm nominal dia and average width of aperture 1.40mm and fixed with tinned tack or galvanized wire staple all as directed fixed. |
| 67 | S&F Butt hinges 100mm size, 2.5mm thick stainless steel 202 grade, complete all as specified and as directed. |
| 68 | S&F Aluminium anodised tower bolt 150mm long of extruded section etc., complete all as specified and as directed |
| 69 | S&F Aluminium anodised tower bolt 200 mm long of extruded section etc., complete all as specified and as directed |
| 70 | S&F Aluminium handle 125 mm long, cast type, anodised etc complete all as specified and as directed |
| 71 | S&F Aluminium handle 150 mm long, cast type, anodised etc complete all as specified and as directed |
| 72 | S&F Aluminium alloy, anodised sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy etc complete all as specified and as directed |
| 73 | S & F floor door stopper of aluminium alloy powder coated, with hard down steel spring, length of plate 140 mm all as specified and as directed. |
| 74 | S&F mild steel ordinary rat tail rod pattern springs 300mm long including roller and roller plate complete all as specified and as directed. |
| 75 | S&F in repairs stainless steel decorative curtain rod of 20 mm bore, wood finishes, weight not less 300 gms per running meter, including fancy finale caps cap etc complete all as specified and as directed |
| 76 | S&F in repair Bracket for curtain rod of dia 20 mm dia made out of SS Flat not less than 20 mm wide 1.50 mm thick and overall length not less than 160 mm fixed with screws min 2 Nos with Rawl Plug of size not less than 50 mm long including wooden base etc., complete all as specified and as directed |
| 77 | S & F in repairs 18/19mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, including 6mm thick teak fillet alround fixed in kitchen Cabinet or cupboards all as specified & directed. |
| 78 | M&L for second class hard wood plain fillets square, rectangular or triangular in section exc 6 & n exc 13 sqcm cross section area, wrought secured with nails or brads fixed to cupboard shutter including taking down old fillets all as specified and directed. |
| 79 | S&F Continuous (piano) hinges 30mm width of flaps (when open) , mild steel, bright finish or electro galvanised all as specified and directed. |
| 80 | S&F Hasp and staple 100 mm size, safety type, aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with screws all as specified and as directed. |
| 81 | S&F Magntet door catcher made of stainless steel complete all as specified and as directed |
| 82 | S & F 40 mm dia Brass cupboard knobs polished fixed with nut, screw and washer complete all as specified and as directed. |
| 83 | Demolition of cement concrete and paving not exc 15 cm thick (below or above ground level) complete all as specified and as directed. |
| 84 | M&L for 75 mm thick cement concrete (1:4:8) type C- 2 using 40mm graded stone aggregate as in sub base to flooring etc complete all as specified and as directed |
| 85 | Dismantling of floor, hearth or wall tilling including cement mortar bedding (but not backing) and removing rubbish off from premises complete all as specified and directed. |
| 86 | M&L for Non Skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer 15 mm thick in CM (1:4) all as specified and as directed. |
| 87 | M&L Non Skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer 15 mm thick in CM (1:4) all as specified and as directed. |
| 88 | M & L for 25mm thick cement concrete (1:2:4) type B-0 using 12.5 mm graded crushed stone aggregate finished even as in levelling concrete for floor all as specified and as directed. |
| 89 | M & L for Glazed ceramic tiles in vertical surfaces 350 x 250x 7 mm / 450 x 350 x 7 mm / 300x450x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over & including backing coat 10mm thick CM (1:4) on brick work or concrete surfaces all as specified and as directed. |
| 90 | M & L for machine cut kota stone slab 20 to 25mm thick in treads of steps in stair, flooring laid and jointed with white cement slurry mixed with pigments to match the shade of the slab including rubbing and mirror polishing laid over & including 20mm thick screed bed in cement mortar (1:4) complete all as specified and as directed. |
| 91 | M & L for machine cut kota stone slab 20 to 25mm thick in rise/steps, skirting, dado and pillar laid and jointed with white cement slurry mixed with pigments to match the shade of the slab including rubbing and mirror polishing over & including backing coat 10mm thick cement mortar (1:3) complete all as specified and as directed. |
| 92 | M&L for cement concrete (1:5:10) type E-2 using 40mm graded crushed stone aggregate filling in sunken floor including demolition of existiong cement concrete & removal of debris to outside of MoD land complete all as specified and as directed. |
| 93 | Material and labour for water proofing to sunken portions of WCs, bathroom and kitchen etc by applying water based, cold applied, single component, elastomeric in-situ seamless monolithic coating ready to use acrylic modified bituminous liquid membrance with the following procedure in sequence all as specified and as directed :-SURFACE PREPARATION (i) Removing all loose gravel, dirt, oil, grease and foreign matter by jet of dry air and cleaning the surface mechanically or by grinding to make it smooth before application. |
| 94 | (ii) Repairing all cracks by cutting “V” groove and fill with PMC mortar prepared in the ratio of Shalicrete : cement : sand (1:2:5) or equivalent. (iii) Providing 50 mm x 50 mm coving made out of PMC mortar as above.MATERIAL PREPARATION (i) Stir TarFelt® LM or equivalent by a slow speed mixture (approx. 400 rpm) fitted with a suitable mixing paddle to ensure a homogenous mix. (ii) After stirring, wait for the product to settle in order to let entrapped air escape. WATER PROOFING APPLICATION(i) Slightly damp the surface. Avoid standing water / ponding.(ii) Prime the surface with a mixture of TarFelt® LM or equivalent and potable water in the ratio of 50:50 and apply @400 grm / sqm of the mixture and allow it to touch dry. |
| 95 | (iii) Apply first coat of TarFwlt® LM @ 0.70 kg / m2 by brush / roller / airless spray while the primed surface is tracky, for faster and smoother application, airless spray is preferred.(iv) Spread fiber glass net of 45 gsm with overlap of 50 mm in both directions when the surface is till tackty.(v) Allow 1st coat to dry for 10-12 hrs.(vi) Apply second coat of TarFelt® LM @ 0.70 kg / sqm by brush / roller / airless spray for final DFT of 1000 micron in two coats inclusive of fibre glass of 45 gsm (theoretical coverage depending on surface conditions).(vii) Sprinkle sand @ 200 grm / m2 over the final vertical coating when the surface is still tackty to facilitate plastering.(viii) Ensure final curing time of 36 hrs before allowing / carrying out any further work.(ix) Conduct ponding test after 7 days of curing at ambient temperature. |
| 96 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar all as specified and as directed. |
| 97 | M & L for 20 mm thick Granite slab (of any type) work (table rubbed and polished) in steps,riser,tread, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite ,including cutting and polishing laid on 15 mm thick screed bed in CM (1:4) set and jointed complete all as specified & as directed. |
| 98 | M & L for Edge moulding to 18-20mm thick granite stone any description of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete all as specified & as directed. |
| 99 | M & L for Complete removal of existing treatment from ceiling surface including in narrow widths/ bands etc., of any description and applying three coats of white wash complete all specified and as directed. |
| 100 | M & L for complete removal of existing treatment from walls including in narrow widths/ bands etc., of any description and finishing with the following specification in sequences complete all specified and as directed :-(i) Applying one coat of 1 mm thick wall care putty(ii) Applying one coat of alkali resistant primer (iii) Appllying two coats of Acrylic emulsion distemper |
| 101 | M & L for Complete removal of existing treatment on wall surfaces chajjas etc of any description including brooming down, steel wire brushing, scrapping down smoke soot's , moulds, moss and efflorescence, salts, trading oil and greasy spots, including filling the minor racks etc with crack filling material all as per manufacturers instructions etc., and applying two coats of Anti fungal weather proof grade exterior acrylic emulsion paint of approved tint over a coat of weather proof grade primer complete all as specified and as directed. |
| 102 | M & L for Preparation of old painted / treated steel and iron surfaces surface over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and as directed. |
| 103 | M & L for Preparation of old painted treated wood and wood based surfaces over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and as directed. |
| 104 | S&F Clothes drying system, pull it pulley operated 4 pipes 5 feet long anodized aluminium pipes, outer dia 22 mm and inner dia 19.80 mm, Pulleys made up of delrin with rope guide mounted on channel pair of length 24\\" (distance between two pipes is adjustable) with locking system to hide rope knot. Channel to be mounted or fixed with self tapping screws, Rope will be HDPE of 4mm dia complete all as specified and directed. |
| 105 | M & L for 100mm thick cement concrete (1:4:8) type D-2 using 40 mm graded crushed stone aggregate as in subbase to floor complete all as specified and directed. |
| 106 | M&L for Sand filling under floors or in foundation including watering and consolidation complete all as specified and as directed. |
| 107 | M&L for Machine pressed precast concrete interlocking paver block with grey cement and pigments any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade complete all as specified and as directed. |
| 108 | M&L for rendering 15mm thick in CM (1:6) on other than fair faces of brick work or concrete surface finished even and smooth with out using extra cement complete all as specified and directed |
| 109 | M&L for preparing new plastered surface of wall and applying three coat of white wash etc complete all as specified and as directed |
| 110 | Taking down carefully aluminium/ copper wiring/power point wiring (light, fan, socket or power) complete including fittings such as switche, ceiling roses, regulators, sockets, light fittings, fans etc and making good the disturbed surface of walls, ceiling etc., including making goo disturbed surface to match with adjoining surfaces complete all as specified and as directed. |
| 111 | M & L for Point Wiring with 1.5 Sqmm single core PVC insulated unsheathed cable 1100 volts grade multi stranded with FRLS copper conductor conforming to IS 694 drawn through and including non-metalic rigid PVC conduit medium grade concealed ISI marked with accessories including GI/ MS branded sunken boxes of suitable module concealed in walls including modular frame and cover of suitable module fixed with cadmium/Heylam plate, iron screws , housing modular type switches, switch socket outlets, fan regulators etc., including 1.5 Sqmm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed for the following :- |
| 112 | One light point controlled by one switch |
| 113 | One fan/exhaust point controlled by one switch/regulator |
| 114 | One light controlled by two way switch |
| 115 | One 3 pin socket outlet 5 Amps on independent board |
| 116 | One bell/buzzer point controlled by bell push |
| 117 | One 3 pin socket out let 5 Amps on same board |
| 118 | M & L for Point Wiring with 2.5 Sqmm single core PVC insulated unsheathed cable 1100 volts grade multi stranded with FRLS copper conductor conforming to IS 694 drawn through and including non-metalic rigid PVC conduit medium grade concealed ISI marked with accessories concealed wiring including GI/ MS branded sunken boxes of suitable module concealed in walls including modular frame and cover of suitable module fixed with cadmium/heylam plat, iron screws , housing modular type switches, switch socket outlets, fan regulators etc., including 2.5 Sqmm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed. Please Enable Macros to View BoQ information |
| 119 | M & L for Point Wiring with 2.5 Sqmm single core PVC insulated unsheathed cable 1100 volts grade multi stranded with FRLS copper conductor conforming to IS 694 drawn through and including non-metalic rigid PVC conduit medium grade concealed ISI marked with accessories concealed wiring including GI/ MS branded sunken boxes of suitable module concealed in walls including modular frame and cover of suitable module fixed with cadmium/heylam plat, iron screws , housing modular type switches, switch socket outlets, fan regulators etc., including 2.5 Sqmm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayNov 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender