Tender For Upgradation Of 50 Kva Transformer To 400 Kva Transformer At Fd Wksp Coy Of Eme Bn Under Age E/M-I Of Ge 865 Ews
Tender Value
42.71 Lakhs
Estimated cost
Bid Submission
24 Oct 2026
16 days left
EMD
85500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
leh → Ladakh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Upgradation Of 50 Kva Transformer To 400 Kva Transformer At Fd Wksp Coy Of Eme Bn Under Age E/M-I Of Ge 865 Ews
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches not exceeding 1.5m in wide and not exceeding 1.5 m in depth for laying of pipe etc. and getting out in soft soil, complete all as specified and/or as directed by Engr-in-Charge. |
| 2 | All as per Srl item No 1.00 above but additional 1.5 mtr or part thereof in depth beyond the first 1.5m, complete all as specified and/or as directed by Engr-in-Charge. |
| 3 | M&L for sand cushioning to underground cables 8 cm below the cable before laying & 15 cm above the cable after laying, complete all as specified in clause 19.75 of SSR Par-I, complete all as specified and/or as directed by Engr-in-Charge. Note : Punned thickness of 18 cm will be measured and paid seperately. |
| 4 | Supply and laying of factory made, machine pressed, unreinforced, pre-cast concrete cable cover class LV type-1 flate size 250mm x 150mm x 40mm, complete all as specified and/or as directed by Engr-in-Charge. |
| 5 | All as per Srl item No 4.00 above but class HV, Type 1, flat, size 300mmx l80mm x 50mm. |
| 6 | M&L for returning, filling in including spreading, leveling, watering and well ramming in layers not exc. 25 cm thick, complete all as specified and/or as directed by Engr-in-Charge. |
| 7 | M&L for removing surplus soil to a distance not exc. 50 m and depositing where directed at a level not exceeding 1.5 mtr above the starting point, complete all as specified and/or as directed by Engr-in-Charge. |
| 8 | M&L PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in foundation, filling mass concrete including necessary form work, complete all as specified and/or as directed by Engr-in-Charge. |
| 9 | M&L for PCC 1:3:6 type C 1 using 20 mm graded aggregate block masonry with solid block, exc. 10 cm in width and setting in mortar complete for coping of pole including necessary from work and fair finish to the exposed surface area without using extra cement, complete all as specified and/or as directed by Engr-in-Charge. |
| 10 | M&L for cement concrete in foundation, filling and mass concrete type B-2 (1:2:4), with using 40mm aggregate, complete all as specified and/or as directed by Engr-in-Charge. |
| 11 | Supply, erecting and fixing in true vertical position steel tubular swaged poles (11.0 m long) complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-55, complete all as specified and/or as directed by Engr-in-Charge.Note : Earth work & PCC work will be measured & paid seperately under relavent item. |
| 12 | S&F disc type insulator, porcelain, vitreous, white brown or green, 150mm high, and 150mm dia ball and socket type single disc assembly for tension with tension clamps for conductors, working pressure 11000 volts grade, complete all as specified and/or as directed by Engr-in-Charge. |
| 13 | S&F lightning arresters expulsion type complete with all fittings, 30 kilo amp discharge capacity, distribution class, Make - AREVA / ALSTHOM suitable for 11 KV HT overhead network including necessary connections with HT overhead lines, complete all as specified and/or as directed by Engr-in-Charge. |
| 14 | S&F air break switch gang operated (GOD) triple pole with drop out fuses mechanically operated, mounted on insulators 15 Nos & steel frame with operating mechanism & operating rod of GI pipe 25mm & medium grade with necessary clamps to be operated from ground level 11000 Volts grade working pressures and current upto 200 Amps, complete all as specified and/or as directed by Engr-in-Charge. |
| 15 | S&F drop out fuse unit expulsion type for outdoor air break gang operated switch, single pole, mounted on polymer based insulators for 11 KV working pressure, fixed to and including MS channel with nuts, bolts, washers etc. synthetic bounded fuse carrying tube complete with line taps and suitable for current carrying capacity upto 25-50 Amps and connected with suitable size of ACSR conductor as jumper between GOD and DO fuse, with 11 KV HT PVC sleeve, with all fittings/accessories for current rating 200 Amps, including taking down of only 3 fuses, complete all as specified and/or as directed by Engr-in-Charge. |
| 16 | Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 11000 volts grade of size 3 core 120 sqmm, complete all as specified and/or as directed by Engr-in-Charge. |
| 17 | S&F cable jointing kit of 11 KV grade cable for outdoor termination, heat shrink type joiont complete with jointing material and accessories suitable for 3 core XLPE, armoured, aluminium conductor cable of size 120 sqmm, complete all as specified and/or as directed by Engr-in-Charge. |
| 18 | Supply and installation of copper wound transformer step down, outdoor type complete with standard fittings, HT 11 KV 3 Phase, LT 433 volts, 3 Phase 4 wire with off load tappings on HT side to vary secondary voltage within limit, all as per IS:2026 of capacity 400 KVA, Level-3, complete all as specified and/or as directed by Engr-in-Charge. |
| 19 | M&L for construction of PCC platform of size 2.5 m x 2 m x 1.5 m using PCC 1:3:6 type C2 plateform for installation of 400 KVA Transformer, complete all as specified and/or as directed by Engr-in-Charge. |
| 20 | M&L for making chain link fencing around PCC platform for 400 KVA Transformer of size 6 m x 6 m and height 1.8 m including 40 x 40 x 6 angle iron post at 1.5 m internal and also at corners including filling aggregate of 40mm to 63mm size all around the platform alongwith entrance gate, complete all as specified and/or as directed by Engr-in-Charge. |
| 21 | S&F feeder pillar box of suitable size for 3 phase, 415 volt with 4 Nos aluminium bus bar strip and arrangements for and fixing 12 Nos MCB SPN 63 Amp 240 V 'C' type with din rail for mounting and necessary wiring for MCBs, complete all as specified and/or as directed by Engr-in-Charge. |
| 22 | Earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm as earthing lead buried directly in ground vertically to a depth not less than 2.25 m deep below ground level with top edge of the plate not less than 1.5 m below normal ground level connected to and including galvanised iron strip 32 x 6 mm as earthing lead by means of bolts, nuts, checknuts and washers etc. made of GI and connected earthing test points all as shown in electrical plate no. 5 of SSR Part-1 of 2009 and as specified or indicated and testing on completion including excavation/earth work in any type of strata PCC (1:3:6) type C1 earthing chamber, pre cast slab 50 mm thick in cement concrete (1:2:4) type B1 (reinforced with welded steel wire fabric (XPM) weight not less than 4 kg/sqm) funnel with grade and lugs, including galvanised iron strip 32 x 6 m with GI protection pipe of 40 mm medium grade 7.5 meter long etc., complete all as specified and/or as directed by Engr-in-Charge. |
| 23 | Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 400 sqmm 3.5 core, complete all as specified and/or as directed by Engr-in-Charge. |
| 24 | All as per Srl item No 23.00 above, but of size 150 sqmm 3.5 core. |
| 25 | All as per Srl item No 23.00 above, but of size 120 sqmm 3.5 core. |
| 26 | All as per Srl item No 23.00 above, but of size 95 sqmm 3.5 core. |
| 27 | All as per Srl item No 23.00 above, but of size 70 sqmm 3.5 core. |
| 28 | All as per Srl item No 23.00 above, but of size 25 sqmm 4 core. |
| 29 | All as per Srl item No 23.00 above, but of size 25 sqmm 2 core. |
| 30 | All as per Srl item No 23.00 above, but of size 16 sqmm 2 core. |
| 31 | All as per Srl item No 23.00 above, but of size 10 sqmm 2 core. |
| 32 | S&F steel tubular swaged street light poles complete with pole arms 1.2 m & cast iron base plate, finial taper plug, bolts, nuts and screws as specified type 410 SP-31 9.0 mtr long and painting with two coats of aluminium paint over one coat of primer on exposed surface of pole, complete all as specified and/or as directed by Engr-in-Charge.Make : National / Bombay Poles. |
| 33 | M&L for fixing of pin insulator porcelain white, brown or green 100 mm height, 65 mm dia for 1100 volts grade, complete all as specified and/or as directed by Engr-in-Charge. |
| 34 | S&F ACSR conductor any size drawn straight horizontal on overhead lines on existing poles including binding with insulators. Weight of conductor shall be measured straight horizontal distance between centre of two adjacent poles and calculating weight of conductor of size and length by adding 3% extra for sag, jointing jumpers etc., complete all as specified and/or as directed by Engr-in-Charge. |
| 35 | S&F of cross arms bracing support clamps, back plates fabricated from steel section made out of Fe-0-310/Fe-0-410 including nuts, bolts and washers welding, drilling hole complete with two coats of aluminium paint over one coat of primer, complete all as specified and/or as directed by Engr-in-Charge. |
| 36 | S&F of galvanized steel wire 4mm dia for continuous earth wire, complete all as specified and/or as directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
| 37 | S&F of galvanized steel wire 4mm dia for continuous earth wire, complete all as specified and/or as directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysOct 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender