Tender For Repair And Maintenance Of Steel / Wooden Furniture, Painting To Steel Furniture, Polishing Of Wooden Furniture For Zone-I And Ii Under Age (I) Nyoma
Tender Value
24 Lakhs
Estimated cost
Bid Submission
24 Oct 2026
17 days left
EMD
48000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
nyoma → Jammu And Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintenance Of Steel / Wooden Furniture, Painting To Steel Furniture, Polishing Of Wooden Furniture For Zone-I And Ii Under Age (I) Nyoma
BOQ
| Sl. No. | Item Description |
| 1 | STEEL CUPBOARD LARGE (Drg No : TP) S&F as in repair 6 lever lock with duplicate flat key (02 Nos of key) with existing size fixed with screw/ welding to shutter of Almirah, complete all as specified and/or as directed by Engr-in-Charge.Make : Godrej / Hettich / Link / Ebco. |
| 2 | S&F as in repair for 3-way assembly including 6mm thick round bars with necessary fittings of approved quality for Almirah, complete all as specified and/or as directed by Engr-in-Charge. |
| 3 | S&F as in repair handle of Godrej pattern with necessary fixing accessories of approved quality, complete all as specified and/or as directed by Engr-in-Charge. |
| 4 | S&F as in repair for new bottom made out of 1mm thick MS sheet made to shape and size on drawing and fixing by welding matching with existing almirah and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and/or as directed by Engr-in-Charge. |
| 5 | S&F as in repair of new legs made out of 1mm thick of MS sheet and fixed with welding/riveting for the bottom portion as per existing size and duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and/or as directed by Engr-in-Charge. |
| 6 | S&F as in repair of new MS hinges or U clips of same shape & size as existing in steel almirah by fixing duly welded, complete all as specified and/or as directed by Engr-in-Charge. |
| 7 | S&F as in repair for new shelves made out of 1mm thick MS sheet made to shape and size on drawing and fixing with cleats, nuts and bolts, complete all as specified and/or as directed by Engr-in-Charge. |
| 8 | Taking down of door shutter of cupboard and bringing the item to the original shape and refixing the repaired door shutters with suitable hinges, complete all as specified and/or as directed by Engr-in-Charge. |
| 9 | Taking down of existing dented shelves from Almirah steel bringing the item to the original shape and refixing the shelves with necessary cleats/nuts/bolts including two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and/or as directed by Engr-in-Charge. |
| 10 | STEEL CUPBOARD SMALL (Drg No : TP) S&F as in repair 6 lever lock with duplicate flat key (02 Nos of key) with existing size fixed with screw/ welding to shutter of Almirah, complete all as specified and/or as directed by Engr-in-Charge.Make Godrej / Hettich / Link / Ebco. |
| 11 | S&F as in repair for 3-way assembly including 6mm thick round bars with necessary fittings of approved quality for Almirah, complete all as specified and/or as directed by Engr-in-Charge. |
| 12 | S&F as in repair handle of Godrej pattern with necessary fixing accessories of approved quality, complete all as specified and/or as directed by Engr-in-Charge. |
| 13 | S&F as in repair for new bottom made out of 1mm thick MS sheet made to shape and size on drawing and fixing by welding matching with existing almirah and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and/or as directed by Engr-in-Charge. |
| 14 | S&F as in repair of new legs made out of 1mm thick of MS sheet and fixed with welding/riveting for the bottom portion as per existing size and duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and/or as directed by Engr-in-Charge. |
| 15 | S&F as in repair of new MS hinges or U clips of same shape & size as existing in steel almirah by fixing duly welded, complete all as specified and/or as directed by Engr-in-Charge. |
| 16 | S&F as in repair for new shelves made out of 1mm thick MS sheet made to shape and size on drawing and fixing with cleats, nuts and bolts, complete all as specified and/or as directed by Engr-in-Charge. |
| 17 | Taking down of door shutter of Almirah and bringing the item to the original shape and refixing the repaired door shutters with suitable hinges, complete all as specified and/or as directed by Engr-in-Charge. |
| 18 | Taking down of existing dented shelves from Almirah steel bringing the item to the original shape and refixing the shelves with necessary cleats/nuts/bolts including two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and/or as directed by Engr-in-Charge. |
| 19 | ALMIRAH LARGE STEEL WITH SHELVES/ALMIRAH LARGE 1/2 H 1/2 SH(Drg No : FD-67/109M)/114 (M)/351/1031/1033/FD/E6/MAP/18)S&F as in repair 6 lever lock with duplicate flat key (02 Nos of key) with existing size fixed with screw/ welding to shutter of Almirah, complete all as specified and/or as directed by Engr-in-Charge.Make Godrej / Bharat or equivalent as approved by Engr-in-Charge. |
| 20 | S&F as in repair for 3-way assembly including 6mm thick round bars with necessary fittings of approved quality for Almirah, complete all as specified and/or as directed by Engr-in-Charge. |
| 21 | S&F as in repair handle of Godrej pattern with necessary fixing accessories of approved quality, complete all as specified and/or as directed by Engr-in-Charge. |
| 22 | S&F as in repair for new bottom made out of 1mm thick MS sheet made to shape and size on drawing and fixing by welding matching with existing almirah and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and/or as directed by Engr-in-Charge. |
| 23 | S&F as in repair of new legs made out of 1mm thick of MS sheet and fixed with welding/riveting for the bottom portion as per existing size and duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and/or as directed by Engr-in-Charge. |
| 24 | S&F as in repair of new MS hinges or U clips of same shape & size as existing in steel almirah by fixing duly welded, complete all as specified and/or as directed by Engr-in-Charge. |
| 25 | S&F as in repair for new shelves made out of 1mm thick MS sheet made to shape and size on drawing and fixing with cleats, nuts and bolts, complete all as specified and/or as directed by Engr-in-Charge. |
| 26 | Taking down of door shutter of Almirah and bringing the item to the original shape and refixing the repaired door shutters with suitable hinges, complete all as specified and/or as directed by Engr-in-Charge. |
| 27 | Taking down of existing dented shelves from Almirah steel bringing the item to the original shape and refixing the shelves with necessary cleats/nuts/bolts including two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and/or as directed by Engr-in-Charge. |
| 28 | PVC CHAIR (CUSHIONED) STEEL (TP) M&L for legs of 19 mm square MS pipe 16 gauge of length 510 mm of CHAIR EASY (CUSHIONED) STEEL including dismantling of the existing unserviceable one, complete all as specified and/or as directed by Engr-in-Charge. |
| 29 | All as per Srl item No 04 above but Seat base rail of 19 mm square MS pipe 16 gauge of length 700 mm, complete all as specified and/or as directed by Engr-in-Charge. |
| 30 | All as per Srl item No 04 above but Teak wood hand rest of size 19 mm x 65 mm of length 700 mm duly french polished and fixed with screws, complete all as specified and/or as directed by Engr-in-Charge. |
| 31 | All as per Srl item No 04 above but 50 mm thick, 40 D foam of size 560 mm x 635 mm, duly covered with approved shade leatherite over the existing 12 mm thick Teak wood plank as per drg of seat base, complete all as specified and/or as directed by Engr-in-Charge.Note : Cost of leatherite cloth shall not be less than Rs 350.00 per mtr. |
| 32 | All as per Srl item No 04 above but 25 mm thick, 40 D foam of size 560 mm x 355 mm, duly covered with approved shade leatherite over the existing 12 mm thick Teak wood plank as per drg of back rest base, complete all as specified and/or as directed by Engr-in-Charge. Note : Cost of leatherite cloth shall not be less than Rs 350.00 per mtr. |
| 33 | All as per Srl item No 04 above but jointing of 20 mm x 3 mm MS flat iron cleats between Hand rest and MS square pipes with steel screws, complete all as specified and/or as directed by Engr-in-Charge. |
| 34 | All as per Srl item No 04 above but dismantled metal clamp at back side of seat rest to be refixed with steel srews, complete all as specified and/or as directed by Engr-in-Charge. |
| 35 | All as per Srl item No 04 above but Hard rubber shoes as per sample, complete all as specified and/or as directed by Engr-in-Charge. |
| 36 | TABLE COMPUTER (Drg No :- FD/E6MAP/03)S&F of 18mm pre-laminated MDF board (900x600mm) for table top with 2mm PVC beading of Table Computer, rest all as shown on drg, complete all as specified and/or as directed by Engr-in-Charge. |
| 37 | S&F of new powder coated telescopic steel channel in black paint for key board plank of Table Computer, rest all as shown on drg, complete all as specified and/or as directed by Engr-in-Charge. |
| 38 | S&F as in repairs of 18mm pre-laimnated MDF board for keyboard tray with matching PVC edging all around of Table Computer, rest all as shown on drg, complete all as specified and/or as directed by Engr-in-Charge. |
| 39 | Removal of existing worn out painting from inside & outside including preparation of surface frame complete of the following steel furniture and M&L for applying two coats of 1st quality synthetic black paint over a coat of red oxide primer, rest all as shown on drg, complete all as specified and/or as directed by Engr-in-Charge. |
| 40 | CHAIR COMPUTER/ REVOLVING (Drg No : TP-Godrej/Aristo/Raj & Raj and FD/E6/MAP/01)S&F for Twin Castor wheel of size 50mm dia as per sample of Chair Computer / revolving low or high back after and including dismantling the old unserviceable one carefully without damaging the adjoining parts, complete all as specified and/or as directed by Engr-in-Charge. |
| 41 | All as per Srl item No 6 above but Stainless Steel Pedestal assembly complete. |
| 42 | All as per Srl item No 6 above but Acrylic fabric for seat and back as per approved colour and shade & S&F transparent plastic dust sheet covers for seat and back.Note : Unit shall be each seat and each back.Note: Rate of cloth should not be less than 420.00 per sq mtr. |
| 43 | All as per Srl item No 6 above but Gas lift rod with proper adjusting tilt. |
| 44 | All as per Srl item No 6 above but Arm rest pair. |
| 45 | All as per Srl item No 6 above but Polyurethane foam of 50 mm thick of density 40 best quality for seat and back with pvc lipping. |
| 46 | TABLE CLERK STEEL/ TYPIST STEEL (Drg No FD-84(M)/381/1004/1005)S&F of drawer of Table Clerk Steel and Typist Steel with two coats of olive green paint over a coat of red oxide zinc chrome primer, complete all as specified and/or as directed by Engr-in-Charge. |
| 47 | S&F for 19mm thick pre-laminated MDF board exterior grade on table top of Table Clerk Steel and Typist steel with 2 mm thick PVC beading alround the top and including taking down old unserviceable top, complete all as specified and/or as directed by Engr-in-Charge. Make: Action Tesa / Greenply / Centuryply / Duratuff. |
| 48 | M&L for preparation of old painted steel surfaces of Table Office Clerk Steel / Typist Steel by scraping with emery paper, cleaning, re-dusting, making the surface smooth and apply one coat of synthetic enamel paint of approved shade as per direction, complete all as specified and/or as directed by Engr-in-Charge. |
| 49 | S&F 25 mm square MS pipe of 16 guage thick standard steel for Tables, complete all as specified and/or as directed by Engr-in-Charge. |
| 50 | S&F for hard rubber shoes of steel table's legs, complete all as specified and/or as directed by Engr-in-Charge. |
| 51 | S&F for 4 lever lock with flat type SS key in duplicate for Steel Tables Office Clerk Steel, complete all as specified and/or as directed by Engr-in-Charge. Make:- Godrej / Link / Bharat. |
| 52 | S&F as in repair for PVC receased handles for Steel Tables Drawer, complete all as specified and/or as directed by Engr-in-Charge. |
| 53 | TABLE OFFICE OFFICER STEEL (Drg No FD-84(M)/1002/1003)S&F of drawer of Table Office Officer Steel with two coats of synthetic enamelled paint (Colour/shed as approved) over a coat of red oxide zinc chrome primer, complete all as specified and/or as directed by Engr-in-Charge. |
| 54 | S&F for 19mm thick pre-laminated MDF board exterior grade on table top of Table Office Officer Steel with 2mm thick teakwood beading alround the top and including taking down old unserviceable top, complete all as specified and/or as directed by Engr-in-Charge. Make: Action Tesa / Greenply / Centuryply / Duratuff. |
| 55 | M&L for preparation of old painted steel surfaces of Table Office Officer Steel by scraping with emery paper, cleaning, re-dusting, making the surface smooth and apply one coat of synthetic enamel paint of approved colour as per direction, complete all as specified and/or as directed by Engr-in-Charge. |
| 56 | S&F 25 mm square MS pipe of 16 guage thick standard steel for Tables, complete all as specified and/or as directed by Engr-in-Charge. |
| 57 | S&F for hard rubber shoes for table legs, complete all as specified and/or as directed by Engr-in-Charge. |
| 58 | S&F for 4 lever lock with flat type SS key in duplicate for Tables Office Steel, complete all as specified and/or as directed by Engr-in-Charge. Make:- Godrej / Link / Bharat. |
| 59 | S&F PVC receased handles for Steel Tables Drawer, complete all as specified and/or as directed by Engr-in-Charge. |
| 60 | Supply only Mattress 8\\" thick (Dunlop/Curlon or equivalent). |
| 61 | PAINTING :Almirah Large Steel with Shelves/ Almirah Large 1/2 H 1/2 SH :(i) M&L for preparation of old steel surfaces before painting by paint remover / scraping with emery paper, cleaning, re-dusting, removal of dent making the surfaces smooth and applying putty wherever required and applying two coats of synthetic enamel paint of approved shade, make & quality inside and outside over a coat of red oxide through spray machine on Almirah large steel with shelves, complete all as specified and/or as directed by Engr-in-Charge. (ii) Work will be executed where the furniture articles exist in different user unit, single accn under the AoR of AGE (I) Nyoma, as directed by Engr in Charge.Note : Ref drawing No FD-67/109M)/114 (M)/351/1031/1033/FD/E6/MAP/18 |
| 62 | Steel Cupboard Large (Drg No :- TP)All as per Srl item No 09 above but steel cupboard large, complete all as specified and/or as directed by Engr-in-Charge. Note : Ref drawing No TP. |
| 63 | Steel Cupboard Small (Drg No :- TP)All as per Srl item No 09 above but steel cupboard small, complete all as specified and/or as directed by Engr-in-Charge. Note : Ref drawing No TP. |
| 64 | PVC Chair (Cushioned) Steel (TP)All as per Srl item No 09 above but PVC Chair (Cushioned) Steel (TP), complete all as specified and/or as directed by Engr-in-Charge.Note : Ref drawing No TP. |
| 65 | Table Computer (Drg No :- FD/E6MAP/03) All as per Srl item No 09 above but Table Computer, complete all as specified and/or as directed by Engr-in-Charge.Note : Ref drawing No FD/E6MAP/03 |
| 66 | Chair Computer/ Revolving (Drg No : TP-Godrej/Aristo/Raj & Raj and FD/E6/MAP/01)All as per Srl item No 09 above but Chair Computer/ Revolving, complete all as specified and/or as directed by Engr-in-Charge.Note : Ref drawing No TP-Godrej/Aristo/Raj & Raj and FD/E6/MAP/01 |
| 67 | Table Clerk Steel/ Typist Steel (Drg No FD-84(M)/381/1004/1005)All as per Srl item No 09 above but Table Clerk Steel/ Typist Steel, complete all as specified and/or as directed by Engr-in-Charge.Note : Ref drawing No FD-84(M)/381/1004/1005 |
| 68 | Table Office Officer Steel (Drg No FD-84(M)/1002/1003)All as per Srl item No 09 above but Table Office Officer Steel, complete all as specified and/or as directed by Engr-in-Charge.Note : Ref drawing No FD-84(M)/1002/1003 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysOct 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender