Defence Statutory Bodies & Commissions/Committees Closing in 25 days TDR #57848559

Tender For Special Repair To Security Boundery Wall (Approx 2 Km Long) And Provn Of Arboriculture Work For 37 Advance Medical Store Depot At Udh Ur Under Ge (North) Udh Ur

Issued by Statutory Bodies & Commissions/Committees · Reasi, Jammu and Kashmir
Tender Value
1.02 Crore
Estimated cost
Bid Submission
31 Oct 2026
25 days left
EMD
1.78 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Reasi → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Special Repair To Security Boundery Wall (Approx 2 Km Long) And Provn Of Arboriculture Work For 37 Advance Medical Store Depot At Udh Ur Under Ge (North) Udh Ur

BOQ

Name of Work:- SPECIAL REPAIR TO SECURITY BOUNDERY WALL (APPROX 2 KM LONG) AND PROVN OF ARBORICULTURE WORK FOR 37 ADVANCE MEDICAL STORE DEPOT AT UDH UR UNDER GE (NORTH) UDH UR
Sl. No. Item Description
1BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: COMMANDER WORKS ENGINEER, UDHAMPUR NAME OF WORK: SPECIAL REPAIR TO SECURITY BOUNDERY WALL (APPROX 2 KM LONG) AND PROVN OF ARBORICULTURE WORK FOR 37 ADVANCE MEDICAL STORE DEPOT AT UDHAMPUR UNDER GE (NORTH) UDHAMPUR Contract No: CWE/U(N)-69/2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Ser.No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT TOTAL AMOUNT In Words
2Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified.
3Demolition of brick work or stone masonry built in cement mortar including all quoins arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified and directed.
4Excavation in trenches not exc. 1.5m wide and not exc. 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5m in depth in any type of soil and getting out, complete all as specified and as directed.
5Returning, filling in (soil) including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick in any type of soil,complete all as specified and as directed.
6Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point, complete all as specified and as directed.
7Demolition of Cement Concrete of any description and in any position not otherwise specifically provided for, complete all as specified and as directed.
8Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, removing all type of vegetation (like peeple tree etc) scrubbing down with water complete, all as specified and as directed.
9Brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:4, complete all as specified and as directed.
10Brick work with sub class B bricks straight or curved on plan to any radius built in CM 1:4 but except bricks all complete all as specified and as directed.
1115 mm thick rendering on fair faces of brick /concrete .surfaces in cement mortar 1:4 with using water proofing compound and finished even and smooth without using extra cement complete all as specified and as directed.
12Supply only integral water proofing compound, complete all as specifed.
13110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed in weep holes complete all as specified and directed.
14Plain cement concrete 1:2:4, type B-1 (using 20 mm graded crushed stone aggregates) as in steps, seismic and other similar bands, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, cills, lintels upto 1.50 metre clear span, copings etc. and in similar works including weathering, slightly rounded or chamfered angles and throating and necessary form works, complete, all as specified and directed.
15M&L two coats of cement base paint over newly plastered surfaces of wall and including one coat of primer and preparing surfaces, complete all as specified and as directed.
16Plain cement concrete 1:2:4 type B-2 (using 40mm graded crushed stone aggregates) as in surface channels and drains, complete, complete all as specified and as directed.
17Mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc flat iron filltets(for securing wire mesh etc) including all necessary drilling, bolting or reveting etc and similar work confirming to Fe410-0 or Fe310-0 complete all as specified and as directed.
18Galvanised, 2 strand, steel barbed wire 2.24 mm dia, barbed with 2.00 mm dia barbs at 75 mm spacing, straining and fixing to any standard rails and straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire staples or steel pins etc all as specified. (Each line of wire to be measured).
19Concentina coil punched type (including spike and handle) with 50/51 turns and dia 600mm, having a 2.6mm dia core wire of high carbon spring steel of high tensile strength. The punched tape and core wire are electro galvanized to provide protection againist out door exposure. The puched tape is mechanically crimped over the cover wire and then formed into a coil at various parts of the periphery of the coil steel clips connect the individual turns of the coil to each other so that it opens up like an accordion. The weight of each coil will be 9 Kgs (+/-5%) without packing material and coil length 7 to 8 mtr when opened up. Each coil wound with bituminized Hession cloth of providing protctive coating, complete all as specified and directed.
20M & L for broken glass coping on top of walls in cement mortar 1:3 complete all as specified & directed.
21Plain cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in foundations filling and mass concrete complete, all as specified and directed.
22Preparation of new steel surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed.
23RCC M-25 (design mix), using 20 mm graded crushed stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5m span, complete all as specified and as directed.
24Reinforced cement concrete M-25 design mix (using 20 mm graded crushed stone aggregate) as in columns, pillars, piers, posts and struts, complete all as specified and as directed.
25Formwork to sides of pillars, posts, struts, piers, columns and stanchions etc, square, ractangular or polygonal, to obtain rough finished surface of flat concrete complete all as specified and as directed.
26TMT mild steel bars, 10mm dia and over, as in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and including binding with MS wire (annealed not less than 0.9mm dia), complete all as specified and as directed.
27TMT mild steel bars, 6 to 8mm dia and over, as in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and including binding with MS wire (annealed not less than 0.9mm dia), complete all as specified and as directed.
28Preparation of soil/ground by uprootng grass/ vegetation etc, removing boulders, pebbles etc observed in the earth, leveling the surface flat or in slope complete all as specified and directed by the Engr-in- charge at site.
29Planting of wild/local grass in the prepared surfaces ( incl cost of grass) , watering upto the healthy growth and further germination complete all as specified and as directed by the Engr-in- charge at site
30Supply and planting well grown disease free plants (including cost of plants/trees/shrubs) as appended below including preparing beds not less than 45 cm dia upto a suitable depth from the adjoining ground level and watering for suitable period of time till its helathy growth and further germinationns complete all as directed by the Engr-in Charge.
31Bottle palm (3-4) feet tall
32Mor Pankhi (3-4 feet tall)
33Duranta (3-4 feet tall)
34Amaltas (3-4 feet tall)
35Christmas tree (3-4 feet tall)
36Bouganvilea (3-4 feet tall)
37Gulmohar (3-4 feet tall)
38Kachnar (3-4 feet tall)
39Jacranda (3-4 feet tall)
40Silver Oak (3-4 feet tall)Note :- Cost of good earth manure etc, watering etc shall to be included in the rates of ser No. 28 & 29
41Mild steel tree guard of size 2ft x 2ft x 5ft high each made up of angle iron frame jali (mesh) and fixed in position with PCC including necessary excavation and appling two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.
42Manning for maintenance of plants/trees, grass lawn and flower beds 01 Each/ hedges etc by well experienced mali from 0800 hrs to 1700 hrs including watering, replacing dead plants & removing wild weeds etc per complete (attendance of mali be maintained by AGE's Office).Note:1. 01 x Gardener (Mali) will be deployed for (08 hours per day) by the contractor daily for maintainance. The attendence register will be maintained for Gardener (Mali) by Engr-in-Charge.2. Tools and machineries required for cutting/ shapping, trimming of plants and hedges will be provided by the contractor as and when required.3. Maintainance of Ser No. 27 to 31 will be carried out under this item for a period of 12 months. 4. Penal charges will be levied as follows:-(i) Nonemployment of Gardeners (Mali) specified above @ Rs 700/-day per person. (ii) Non replacement of burnt / nongrowth trees / plant / lawngrass / shrubs / saplings / hedges etc @ quoted rate of that particular trees / plant / lawn grass / shrubs /saplings /hedges. Total in Figures 0.0 0.0 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 57848559
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 1.02 Crore
LAST DATE 31-10-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Special Repair To Security Boundery Wall (Approx 2 Km Long) And Provn Of Arboriculture Work For 37 Advance Medical Store Depot At Udh Ur Under Ge (North) Udh Ur
Basic Detail
Tender No CWE/U(N)-69/2026-27
Bidding Type Tender
Location
City Reasi
State Jammu and Kashmir
Key Dates
Publish Date 03 Oct 2026
Submission Date 31 Oct 2026
Open Date 02 Nov 2026
Finance
Tender Value 1.02 Crore
Tender Fee 1000
EMD 1.78 Lakhs
Exemption Not Available
Document List
a0a884d7-f136-4475-a19b-479eff18dab6.html
BOQ_888296.xls
Tenderdocuments.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Oct 03, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Oct 31, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 25 days
Nov 02, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 27 days

Tender Documents

Download All (ZIP) ↓
html

a0a884d7-f136-4475-a19b-479eff18dab6.html

xls

BOQ_888296.xls

pdf

Tenderdocuments.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders