Tender For Certain Repairs For Leakage, Seepage, Roof Treatment And Structure For Zone A, B, C And D At Lgj Mil Stn Under Ge Lalgarh Jattan
Tender Value
40 Lakhs
Estimated cost
Bid Submission
22 Oct 2026
18 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ganganagar → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Certain Repairs For Leakage, Seepage, Roof Treatment And Structure For Zone A, B, C And D At Lgj Mil Stn Under Ge Lalgarh Jattan
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of reinforced cement concrete of any description and in any position, like roofs, floors (other than ground floors), beams,staircases, landing, chajjas, fins, facia and sililar suspended works, including reinforcement cut as required to facilitate demolition and prepare the surface to casting chajja, slabs, fins, facia etc and including removing rubbish material from site and thrown in low laying empty area (as per direction of AGE/JE) at any distance upto 500 m from the site complete all as specified and directed. |
| 2 | Demolition of cement concrete of any description ( unreinforcement concrete) and in any position not otherwise specifically provided for complete all as specified & directed by Engr-in-charge. |
| 3 | Dismantling of brick tiles on tarracing tiles, single layer on roofs complete all as specified & directed by Engr-in-charge. |
| 4 | Demolition mud in roofs, any thickness, including plastering and leeping complete all as specified & directed by Engr-in-charge. |
| 5 | M&L for for levelling course for roof slab, Type B0, 1:2:4 (12.5 mm graded stone aggregate ) using waterproofing compound (SBR) for maintaining proper roof for maintaining proper roof slope and finishing cement concrete surface even and smooth without using extra cement complete all specified.(Minimum thickness of concrete should not be less than 50 mm at any point)Note : Waterproofing compound should be measured and paid separately. |
| 6 | Supply of SBR waterproofing compound @ 2% of per kg cement used complete all as specified. Make :- Fosroc/Sika/Choksey/Chemsol/Bostik/STP |
| 7 | OVERLAY- PU BASED ELASTOMERIC LIQUIED MEMBRANE SYYSTEM FOR EXPOSED ROOF :- Providing and applying polyurethane liquid roof waterproofing with improved water ponding capability, thermal imsulating elasromeric high build liquid membrane for concrete roofs for exterior wall and exposed surface with solid content not less than 80% and solar reflective index 109 as per (ASTM E 1980-19/tear strength - 20n/mm (Free film, 14 days, +30 degree C) (ASTM D624) and tensile strength 2 N/mm2 (ASTM D4541).(a) After proper surface preparation, Apply one coat of Promer for PU coating as per manufacturers specification.(b) Apply 1st coat of shaliUrethane(R) BTD (white) @ 650 gm/ m2 (minimum) or equivalent by brush/ rollar white prime surface is tacky, Spread waterproofing reinforced Glass Fiber mash of 45 GSM with overlaps of 50 mm in both directions when the surface is still tacky. Allow 1st Coat to dry.(c) Apply 2nd & 3rd coat of ShaliUrethane(R) BTD (white) @ Make : Focroc/Sika/Choksey/Chemsol/Bostik/STPNote : (i) The minimum dry film thickness (DFT) of roof treatment shall be 1.5 mm if any shortfall in thickness of above the same shall be achived by additional coat.(ii) The procurement of material shall be carried out by authorised applicator approved by GE.(iii) The manufacturer/authorised applicator shall give a warranty for the performance /authorised applicator shall be give a warranty for the performance & durability for 10 years. |
| 8 | Supply and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner |
| 9 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified & directed by Engr-in-charge. |
| 10 | M&L preparation of new surfaces of steel and iron of any description over 10cm in width or girth not otherwise described, and applying two coats of synthetic enamel paint over a coat of red-oxide primer complete all as specified and as directed. |
| 11 | Demolition of brick work or stone/boulder masonry, built in cement mortar including old size brickwork with subclass ‘B’ bricks, straight or mean radius built in 1:4 complete all as specified and directed. including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles all as directed. |
| 12 | Taking down cement plaster on bricks or stone walls etc and including raking out joints, hacking for key scrubbing down with water etc complete all as specified & directed by Engr-in-charge. |
| 13 | M&L for rendering 15 mm thick on fair faces of brick or stone masonary in CM (1:4) finished even and smooth without using extra cement etc upto height 9.60 m complete all as specified & directed by Engr-in-charge. |
| 14 | Disconnecting existing tanks of capacity exc 250 ltrs and not exc 500 ltrs , setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position & making necessary arrangements for fixing inlet, outlet & overflow pipe complete all as specified and directed. (Cleaning repairing, etc. measured separately) |
| 15 | Disconnecting existing tanks of capacity exc 500 ltrs and not exc 1000 ltrs , setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position & making necessary arrangements for fixing inlet, outlet & overflow pipe complete all as specified and directed. (Cleaning repairing, etc. measured separately) |
| 16 | S&F in repairs, gun metal globe gate valve with iron wheel head screwed both ends for iron pipe and fixed to 20 mm bore fixed in repair complete all as specified and directed. |
| 17 | Taking down 15 mm dia steel GI tubing including all connected fittings of any dia and in any position and Supplying and laying of 20 mm (outer dia) CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified complete all as specified and as directed by Engineer-in-Charge all as directed. |
| 18 | Taking down 20 mm dia steel GI tubing including all connected fittings of any dia and in any position and Supplying and laying of 25 mm (outer dia) CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified complete all as specified and as directed by Engineer-in-Charge all as directed. |
| 19 | Taking down 25 mm dia steel GI tubing including all connected fittings of any dia and in any position and Supplying and laying of 32 mm (outer dia) CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified complete all as specified and as directed by Engineer-in-Charge all as directed. |
| 20 | Taking down eaves gutters and rainwater pipes (any size or pattern) including all fittings, heads, shoes, bends, swan-necks etc., including cleaning or refixing or removal to Store and supply and fixing 110 mm dia PVC SWR pipe, single socketed in any length with rubber ring joints fixed with clamps to walls all as directed. (measured overalll as fixed along the cente line over fittings and accessories) |
| 21 | S & F in repair for 0.71mm plain aluminium sheeting alloy 31000 H4 as in covering of expansion joints stappled with self tapping screw including dismantling of old any type of sheet complete all as specified & directed by Engr-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysOct 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender