Tender For Emergent Restoration Of Sundarban Embankment Damaged Occured On Dated 12.09.2026 Due To New Moon Kotal Near Ho Mohan Mondal For A Length 150.00 M (7540.00 M To 7690 M), Facing River- Bidyadhari (R/B) Mouza-Nazat , G.P.- Nazat-Ii , Block- S
Tender Value
5.81 Lakhs
Estimated cost
Bid Submission
06 Oct 2026
3 days left
EMD
11626
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
24 Paraganas North → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Emergent Restoration Of Sundarban Embankment Damaged Occured On Dated 12.09.2026 Due To New Moon Kotal Near Ho Mohan Mondal For A Length 150.00 M (7540.00 M To 7690 M), Facing River- Bidyadhari (R/B) Mouza-Nazat , G.P.- Nazat-Ii , Block- Sandeshkhali-I Of Haroa Irrigation Sub-Division Under Basirhat Irrigation Division, Dist. North 24 Parganas.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work from borrow pits over existing embankment or for repairs to embankment, closing breaches etc. within an initial lead of 30 metre and lift of 1.50 metre including breaking clods and depositing the same in layers not exceeding 25 cm. and rough dressing etc. complete as per profile. |
| 2 | Extra rate over Item Nos.7 for all kinds of soil for every additional lead of 30 metres or part thereof beyond the initial lead of 30 metres. (i) 02(Two) nos .extra lead. |
| 3 | Extra rate over Item Nos.7 for all kinds of soil for every additional lift of 1.50 metre or part thereof beyond the initial lift of 1.50 metre. (i) One extra lift |
| 4 | Earthwork supplied by boat within a lead of 8.0 KM & all lifts for making embankments or for repairs to embankments, closing breaches or for any other purposes including loading, transporting, unloading and spreading in layers of 25 cms as per profile, all lifts both ways and head load including breaking clods, rough dressing ramming etc. complete as per direction of Engineer-in-charge.(measurement will be made on the basis of pre-work & post-work section / stack measurement with due allowance of shrinkage). No extra payment will be made for stacking. |
| 5 | Supplying, dressing and stacking at site bamboo pins above 5 cm. diameter and upto 7.5 cm. diameter.(Dia. to be measured at mid length). |
| 6 | Driving bamboo pins in standing or flowing water including scaffolding and driving appliances. (a) Where boats are not necessary. |
| 7 | Supplying, fitting and fixing with iron nails half split bamboo wailing pieces (av. dia. of bamboo not less than 5.0 cm.) |
| 8 | Supplying to site empty cement polythene bags (capacity 50kg) in good condition including stacking, incedental charges etc. all complete (capacity 50 kg). |
| 9 | Labour charges for filling empty cement gunny bag / polythene bag (capacity 50 kg) with all kinds of earth (wet or dry), sand or agreegates (stone / brick) and sewing as done in case of cement bags ,(tying with a knot after filling will not be accepted ) , and stacking within a lead of 30 metre as per direction of Engr-in-charge(cost is excluding the cost of any types of filling materials). NB:- Volume of earth/ sand filled bags should not be less than 0.028 cum/ bag. |
| 10 | Dumping in position earth / sand filled gunny / poly bags (capacity 50 kg) within a lead of 30 metre inclusive of all lifts. |
| 11 | Supplying fitting, fixing Darma mat in flowing or stagnant water or in dry areas with 16 SWG GI wire as per direction of the Engineerr-in-charge.A) Where boats are not necessary |
| 12 | Making sausages circular in section (any length) made with 1st class kiln burnt / 1st class picked jhama full bricks rolled inside wire net caging made of 10 S.W.G. galvanised iron wire square pattern (internal dimension of mesh will be 100 mm. x 100 mm. square) galvanised wirenet caging with proper lapping of minimum 150 mm and sewing with 12 SWG. galvanised iron wire including cost of all materials, carriage up to site, placing and laying the same after preparing the bed/trench to proper slope etc. complete as per direction of the Engineer-in-charge. (cost is excluding the cost of end pieces .)c) 0.90 metre diameter. |
| 13 | Supplying, fitting, fixing end pieces for rectangular / square / circular sausages at the ends, with 10 SWG / 8 SWG G I wire net of different mesh sizes tying & sewing the same maintaning a lap langth of 150 mm all around with 12 SWG G I wire complete, including the cost of supply of wire netting,fitting etc, complete as per direction of the Engineer - in - charge.a) Mesh size 100 mm x 100 mm with 10 SWG wire Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 03, 2026
11:30 IST
Tender Published
Tender notice published.
TodayOct 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysOct 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender