Tender For Provn Of Covered Shed Node (60 X 40 X 15 Ft) And Pathway (200 Mtr X 3 Mtr) L Shape For Uas Trg Node At Sigar Mil Stn Under Ge 872 Ews
Tender Value
43.27 Lakhs
Estimated cost
Bid Submission
26 Oct 2026
22 days left
EMD
86540
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
East Siang → Arunachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Covered Shed Node (60 X 40 X 15 Ft) And Pathway (200 Mtr X 3 Mtr) L Shape For Uas Trg Node At Sigar Mil Stn Under Ge 872 Ews
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation not exc 30cm deep and avg 15 cm deep and getting out in soft/loose soil complete all as specified and as directed. |
| 2 | Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, trenches for shafts, wells, cesspits, manholes, pier holes, cable etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed. |
| 3 | Excavating in post holes (or similar holes) each n. exc. 0.5 cum, getting out returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n. exc. 25 cm watering and removing surplus soil to distance n. exc 50 m and making good surface complete all as specified and directed. |
| 4 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm as in soft/loose soil complete all as specified and directed. |
| 5 | Removing excavated material not exc. 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed. |
| 6 | M & L for Sand filling under floors or in foundations including spreading, levelling, watering and consolidation complete all as specified and directed. |
| 7 | M & L for Gravel filling in floors or pavings, laid in layers n exc. 15 cm thick, spread,levelled, and blinded with earth and rammed including watering, complete all as specified & directed. |
| 8 | M & L for Plain cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete, etc complete all as specified and directed. |
| 9 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified & directed. |
| 10 | M & L for Pre-cast cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate), block masonry with solid blocks of size 300x200x200mm or 300x200x100mm, having compressive strength of not less than 100 Kg/Sq Cm (As per IS-2185) exc. 10 cm in width and setting in mortar 1:6 complete all as specified and directed. |
| 11 | M&L for 40mm thick damp proff course to horizontal or vertical surfaces in cement concrete 1:2:4, type B-0 using 12.5mm graded stone aggregate including necessary formwork over and including 50 micron thick polythene film, laid on a coat of bitumen primer @ 0.30 to 0.50 Kg per Sqm and applying a coat of blown type bitumen evenly at the rate of 1.50 Kg per square metre and blinding with clean dry sand @ 0.05 Cum per Sqm complete all as specified and directed. |
| 12 | S & F Pre-Painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as per manufacturer's instruction complete all as specified and directed. |
| 13 | S & F Pre-Painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges/vally gutter, fixed with self tapping screws as per manufacturer's instruction complete all as specified and directed. |
| 14 | M&L Rolled mild steel section as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe-410-W (Gde-E-250) quality A complete all as specified and directed. |
| 15 | S&F Mild Steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment (Fe-290 Gde-E165) complete all as specified and directed. |
| 16 | M & L 100 mm thick cement concrete 1:4:8 type D-2( using 40 mm graded stone aggregate) as in sub base for receving the floors finishes,complete all as specified and directed. |
| 17 | M & L 40 mm thick cement concrete 1:2:4 type B-2( using 20 mm graded stone aggregate) as in floor laidin alternate bays and finishing the surfaces even & fair without using extra cement ,complete all as specified and directed. |
| 18 | S&F Glass dividing strips, 3mm thick and 38 mm width inserted in position to conform to design, as in floor, etc all as specified and directed. |
| 19 | M & L for 75 mm thick, plain cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregate) as in plinth protection etc, finishing cement concrete surface even and smooth without using extra cement including making joints with bitumastic filing in proportion of bitumen and sand 1:2 complete all as specified and directed. |
| 20 | M & L for 80 mm thick coloured Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-35 Grade with Grey cement and no pigment complete all specified & directed. |
| 21 | M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished the surfaces even and fair complete all as specified and directed. |
| 22 | M&L 15 mm thick rendering in cement mortar (1:4) on fair faces of brick or concrete external surfaces in two layers (each 10mm + 5 mm thick) finished even and smooth without using extra cement using water proofing compound on top layer @2% by weight of cement or as per manufactures instruction complete all as specified and directed.Note : WPC shall be measured and paid seperately |
| 23 | S & F water proofing compound (as approved), conforming to IS : 2645-2003, complete all as specified & directed. |
| 24 | M & L for Preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed. |
| 25 | M & L for Preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, zine chrome primer complete all as specified and directed. |
| 26 | M & L for Point wiring for one light/exhaust fan/fan point/call bell controlled by one way switch with two runs of single core 1.5 Sq.mm. (Nominal area) PVC insulated unsheathed multistranded copper conductor cable FRLSH (ISI marked) drawn through and including non metallic PVC casing capping (ISI marked) (aprox size 20/25/40mm width) surface type with all fittings/fixtures such as Tee, Bend, elbow, socketr, shaddle etc including 1.5mm thick MS sunken/terminal box including 3mm thick backelite sheet cover for fixing flush type switches, sockets, regulators etc. including provision of multistranded 1.5 Sq.mm copper conductor cable FRLSH [ISI marked] as earth wire connected to common earth dolly and earth in distribution board complete all as specified and as directed.(Note.: (i) The rate quoted is deemed to include making good the disturbed sufaces and to match the adjoining surface.) |
| 27 | All as per item no. 26.00 above but for 6a point on independent Board , complete all as specified & directed. |
| 28 | All as per item No. 26.00 here in before but for one 15 Amps power point on the independent board with two runs of PVC insulated and unsheathed copper conductor cable of size 2.5 sqmm multistranded FR (ISI marked) and 2.5 sqmm PVC insulated unsheathed solid copper conductor cable FR (ISI marked) as earth lead complete ditto , all as specified and directed. |
| 29 | S & F Modular switch one way 6 Amp 240 volts, 1 module ,240 volt AC and connecting up ,complete all as specified and as directed. |
| 30 | S & F Modular Socket outlet 2 in 1, 3 pin, 5/6 Amps, flush type complete all as specified and as directed. |
| 31 | S & F Modular Switch socket combination 2 in 1, 3 pin, 6 Amp, flush type, universal complete all as specified and as directed. |
| 32 | S & F ceiling rose, 65 X 50mm two to three terminals, PVC/polycarbonate, insolated body complete all as specified and directed. |
| 33 | S & F LED tube light fittings, retro bar professional WH 5700K to 6000K, 20 Watt and 2000 Lumens of cool white with all accessories, internally prewired and connecting up with twin core twisted copper conductor cable of suitable size including tube lamp complete all as specified and directed. |
| 34 | Supply and fixing LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp, complete all as specified & directed. |
| 35 | S & F sheet metal enclosure for DB's when MCBs to be used 8-way, SPN , 240V, Double door with IP 43 protection epoxy based powder coated suitable for mounting MCB DP/SPN as incomer and MCB SP as out -goings with 200 amps rated Bus-bar , neutral Bar, earth bar, connecting cable links and connecting up , including taking down unserviceable sheet metal enclosure of any description ,complete all as specified and as directed. |
| 36 | S & F MCB SPN 6-32A Amps, 240 Volts, 10KA, C Curve complete all as specified and as directed |
| 37 | S & F MCB SPN 40-63A Amps, 240 Volts, 10KA, C Curve complete all as specified and as directed |
| 38 | Supply and laying XLPE insulated, armoured , heavy duty LT underground electric calbe with stranded aluminium conductor , 1100 volts grade of size 95 sqmm x 3.5 core including connecting the cable with the panel board ,DB etc, by using suitable size of aluminum thimbles , connectors,cable glands,bolts,nuts etc, complete all as specified & directed, |
| 39 | Supply and laying XLPE insulated, armoured , heavy duty LT underground electric calbe with stranded aluminium conductor , 1100 volts grade of size 10 sqmm x 4 core including connecting the cable with the panel board ,DB etc, by using suitable size of aluminum thimbles , connectors,cable glands,bolts,nuts etc, complete all as specified & directed, |
| 40 | Supply and laying XLPE insulated, armoured , heavy duty LT underground electric calbe with stranded aluminium conductor , 1100 volts grade of size 10 sqmm x 2 core including connecting the cable with the panel board ,DB etc, by using suitable size of aluminum thimbles , connectors,cable glands,bolts,nuts etc, complete all as specified & directed, |
| 41 | Supply and fixing outdoor Bollard light 230 V Ac outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver ,lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified & directed. |
| 42 | Supply & fixing Junction Box waterproof Electronic Project Box Enclosure Case for Outdoor, indoor suitable for various switch Boxes .inside AI Bushbar 4 strip mounded cabinets Rot-proof & Rust Resistant ,weather Proof (140 mm x 140 mm x 95 mm) complete all as specified & directed. |
| 43 | Materials and Labour Cutting existing road / path etc forlaying/passing cable and proction pipe and making good the disturbed surfaces with cement concrete type C2 ( 1:2:4,) using 20mm graded crushed stone aggregates) of suitable depth complete all as specified & directed. |
| 44 | Supply & laying of GI tubing light grade of size 40 mm dia bore in protection of cable at road crossing/hard standing/pole protection fixed with clamps as per site requirement etc. all as pecified and directed. |
| 45 | Supply and installation testing and commisioning factory made LT feeder pillar box , for outdoor type suitable for 415 Volts 3 Phase 4 wire syestem 50HZ supply having aluminium bus bar 400 Amps for phases and neutral , install on porecelain /epoxy insulator .The panel shall be dust free , vermin proof (IP65) and painted with two coats of synthetic enameled paint over a coat of red oxide primer and made out of steel sheet of 3.15 mm thick CRCA sheet self moulded type and angle iron legs of size 50mmx50mmx6mm having front and rear opening with double shutter and locking arrangement with 50 mm lock and including grouting of panel withnecesary PCC work complete all as specified .The scope of work includes the following accessories with circuit breakers: INCOMMING : (i) MCCB 4 Pole 16 KA, 415 Volts,3 Phase 160 Amps - 01 No (ii) Digital multi function meter showing :- Volt meter 0 to 500 Volts ,Amp meter 0 to 200 Amps - 01 No (iii) Indicating Lamp LED type one set in incoming Phases. . (iv) Internal wiring with PVC insulated copper conductor multi stranded cable 1100 Volt Grade IS 694 arked of appropriate gauge including all copper lugs. (v) Aluminium bus bar 150 Amp, 50 KA breaking capacity 4 strip (vi) MCCB shall be provided with suitable spreader of aluminum conductor for fixing of incoming cable . OUTGOING : (i) MCCB 125 AMP, 4 Pole, 16 KA (ii) MCCB 63 Amp, 4 pole 16 KA (iii) TPN 16 to 32 AMP MCB |
| 46 | M & L for Earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level, connected to galvanized steel earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel, all as shown in Electrical Plate No 3 of SSR Part - I, including necessary excavation and earth work, P.C.C (1:3:6) type C-I with 50 mm thick Pre-cast R.C.C. (1:2:4) type B-I cover slab of size 350x350x50mm (reinforced with 10 mm dia TMT bar @ 10 cm C/C both ways and suitable handle of 12 mm dia round bar), including providing charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode, with funnel and 20 mm bore galvanized iron watering pipe (light grade), wire mesh, aluminium lugs, complete in all respect, GI earth wire protected by 15 mm bore (medium grade) galvanized iron pipe and other end connected with main switch board or Earthing test point as directed, including necessary earth work and disposal of spoil to a distance not exceeding 50 metre and necessary testing on completion inclduing taking down old one complete all as specified and as directed. |
| 47 | Supply and laying dry coarse sand as in cushioning of under ground electric cable in trenches, laid to a uniform thickness of 23 Cm (15 Cm under the cable & 8 Cm over the cable) and gently punned down to 18 Cm thickness complete all as specified and as directed.Note:- Thickness after punning down shall be measured for payment. |
| 48 | Supply and laying of Bricks, sub class 'B' over burnt/fire bricks of old size 230 x 115 x 75 mm locally availble best quality laid in trenches prependicular to U/G cable for protection of cable complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 22 daysOct 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender