Tender For Provn Of Wall Panelling, Aluminium Doors/Ventilators And Addn/Altn To Toilet At Stn Hq Bldg At Af Stn Memaura
Tender Value
Ref. Documents
Estimated cost
Bid Submission
22 Oct 2026
15 days left
EMD
19200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Wall Panelling, Aluminium Doors/Ventilators And Addn/Altn To Toilet At Stn Hq Bldg At Af Stn Memaura
BOQ
| Sl. No. | Item Description |
| 1 | M&L Cement concrete1:2:4(20mm graded aggregate type B-1) 40 mm thick as in sub base of floor etc complete all as specified and directed |
| 2 | M&L for form work to to fair finished surface of soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) all as specified and directed |
| 3 | M&L for RCC1:2:4 nominal mix using (20mm graded aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and directed |
| 4 | M&L for mild deformed TMT steel bars 10mm dia and over, cut to lenght, bent to hsape required, including crandking, bending spirally for hooping fro columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all as specified and directed |
| 5 | Brickwork with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4. |
| 6 | Material & labour for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in CM (1:6) surfaces finished even and fair faces without using extra cement complete all as specified and directed. |
| 7 | Taking down of cement plaster of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc. complete all as specified and directed . |
| 8 | Material & labour for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in CM (1:6) surfaces finished even and fair faces without using extra cement complete all as specified and directed. |
| 9 | M/L 15mm thick rendering in CM 1:4 with with water proofing compound on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified & directed.(Note- WPC Qty should be measured and paid to separately) |
| 10 | Supply only water proofing compound complete all as specified and directed. |
| 11 | Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified and directed . |
| 12 | M & L galzed 1200 x 600 x 9 to 10 mm thick ceramic coloured joint free tiles on walls (vertical surfaces) etc set & jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces including 10mm thick rendering in CM 1:4 complete all as specified and as directed. etc complete all as specified and directed. |
| 13 | S&F Virified Ceramic tiles light shade 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neatcement slurry and pointed inwhite or coloured cement to coloured cement to match as in floor over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 14 | Taking down of wooden chowkats or frame with shutters (without taking off shutters from the frames) exc. n.exc 1.5 Sqm each complete all as specified and directed . |
| 15 | Taking down of wooden chowkats or frame with shutters (without taking off shutters from the frames) exc. 1.50 Sqm & n.exc. 4 Sqm each complete all as specified and directed . |
| 16 | Cutting holes in brick walls exc half brick but n.exc one brick built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting holdfasts and making good dismantled portion in cement concrete 1:2:4 Type B-1 as required all as specified and directed. |
| 17 | S&F Powder coated aluminium frame (minimum thickness of powder coating 50 micron) work for doors, windows ventilators and partitions (Fixed portions) with extruded built up standard tubular section of required size & approved make conforming to IS 733 and 15:1285 fixing with dash fasteners of required dia and size, including necessary filling up the gaps at i.e junctions, Le at top, bottom. and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight. mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. |
| 18 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections of required size & approved make conforming to 15 733 and 15:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle. Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 19 | Supply and fixing 5.5mm thick sheet glass ordianary quality, tinted exceeding 0.50 Sqm in each pane fixed to aluminium frame work with necessary glazing clips/rubber packing/gasket, screws etc complete all as specidied and as directed |
| 20 | S&F 200 mm long Aluminium powder coated tower bolt complete all as specified and directed |
| 21 | S&F 200 mm long Aluminium powder coated handle complete all as specified and directed |
| 22 | S & F door closer hydraulically regulated, Aluminium body (die cast body) designation No. 2 universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 35 to 60 kg and fixed in repairs complete all as specified and directed by Engr-in-charge. |
| 23 | S & F Butt hinges 100mm, extruded aluminium alloy with galvanized mild steel hinge pin, anodised of type B-22 and complete all as specified and as directed. |
| 24 | S&F Aluminium alloy, anodised, sliding door bolt of 250mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed |
| 25 | M&L for Granite (of any type) 16 to 20mm thick machine cut laid over and incl. 15mm thick screed bed/rendering in CM 1:6 as in steps/floors, bedded, platform and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed by Engr-in-charge. |
| 26 | M&L for 17/18 mm (HDMR) High Density High Moisture Resistance WPC board exterior grade both side prelaminated with decorative choice fixed to framework with screws all as specified and directed by Engr-in-charge. |
| 27 | S & F 100mm long aluminium handles cast type anodized, complete all as specified and directed. |
| 28 | S & F of aluminium anodised barrel tower bolts of extruded section and fixed of 100mm long all as specified and directed. |
| 29 | S & F of continous piano hinges mild steel bright finished width of flaps 30mm while open all as specified and directed. |
| 30 | S & F of 40mm dia cap board nobs fixed with nut screw & washer of mild steel bright finish all as specified and directed. |
| 31 | S&F hasp and staple 125mm long aluminium anodised complete all as specified and dircted |
| 32 | Supply & fixing Single piece WC size 380 x 720 x 720 mm, 2D Rimless flushing, UF slim & soft close seat cover, stainless steel 304 grade hinges, quick release hinges complete all as specified and directed. Make Jaquar (VGS - WHT-81853s300UF),/ Grohe / Kohler. |
| 33 | Supply & fixing of Jaquar Thin Rim Tabletop wash basin ,single lever ( white of size 500 x 380 x 120mm including CP waste coupling & PVC waste pipe of 32 mm dia complete all as specified and directed.Make JDS WHT 25937)Grohe / Kohler. |
| 34 | S & F urinal white of size 480x3000x740, white glossy type including all assembly kit, urinal waste pipe with suitable connector/coupling, urinal spreader etc complete all as specified and directed. Make Jaquar ((URS-WHT -13255) / Grohe / Kohler. |
| 35 | S & F urinal partition touhhned glass of suitable size with 10 to 12 mm thickness with 2 Nos SS clips including fitting to wall. |
| 36 | Supply & fixing rectangular frameless mirror 750 x 750mm beveled edges suitable for bathroom, wall mounted silver complete all as specified and directed . |
| 37 | S&F PVC Connection 15mm size with PTMT nut of length 450 mm complete all as specified. |
| 38 | S&F 15mm bore tall body pillar cock for wash basin chrome finish complete all as specified & directed.Make Jaquar (FUS-CHR-29001),/ Grohe / Kohler. |
| 39 | S&F angle cock with wall flange complete all as specified & directed. Make Jaquarr (FUS-CHR-29001) Grohe / Kohler. |
| 40 | S&F bib tap complete all as specified & directed. Make Jaquar (FUS-CHR-29001) Grohe / Kohler |
| 41 | S&F Health faucet complete all as specified & directed. Make Jaquar (ALD-CHR-587), Grohe / Kohler |
| 42 | S&F Toilet paper Holder recessed type complete all as specified & directed. Make Jaquar (AHS-CHR-1551),/ Grohe / Kohler. |
| 43 | S&F Towel rail 450 mm long complete all as specified & directed. Make Jaguar (CAN - CHR - 1111BSM) |
| 44 | S&F Glass Shelf 600 mm long complete all as specified & directed. Make Jaquar (ACN- CHR - 1171N), / Grohe / Kohler. |
| 45 | S&F brass chromium plated towel rail 600 mm long, 20mm dia of a approved quality, complete all as specified & directed. |
| 46 | S&F 75 mm PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall/ laid under floor etc in waste pipes and rain water pipes incuding PVC Tee,socket elbow,clamp etc complete all as specified and directed |
| 47 | S&F 110mm PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall/ laid under floor etc in waste pipes and rain water pipes incuding PVC Tee ,socket,elbow,clamp etc complete all as specified and directed |
| 48 | S&F 110mm/125mm PVC(SWR) Gully Trap setting and jointed with solvent cement complete all as specified and dircted. |
| 49 | S&F, PVC (SWR) bends 75 mm radius |
| 50 | S&F, PVC (SWR) bends 110 mm radius |
| 51 | M&L, PVC (SWR) floor trap 75 mm, plain with grating including jointing with solvent cement. |
| 52 | 5S&F in repairs 125mm dia SS grating with hole complete all as specified and directed. |
| 53 | M & L for prepration of new plastered or unplastered surfaces of wall applying two coats of oil bound distemper incl 3 mm thick wall care putty complete all as specified and directed. |
| 54 | M&L complete removal of existing treatment of any description from old decorated surface of wall and applying two coats of oil bound distemper incl 3 mm thick wall care putty complete all as specified and directed. |
| 55 | Material & labour for preparation of old decorated plastered ceiling surfaces and applying two coats of white wash complete all as specified and directed . |
| 56 | M&L complete removal of existing treatment of any description from old decorated surface of ceiling and applying two coats of oil bound distemper incl 3 mm thick wall care putty complete all as specified and directed. |
| 57 | Cutting Chases for concealed water tubing etc and making disturbed surfaces good in CM 1:3, cutting not exceeding 10 cm girth, on brick walls complete all as specified & directed. |
| 58 | Taking up or down steel tubing and connection 15 mm bore pipe and removing from site complete all as specified and directed . |
| 59 | Taking up or down steel tubing and connection 20 mm bore pipe and removing from site complete all as specified and directed . |
| 60 | Supplying and laying of CPVC pipes, 20 mm th SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors / walls complete all as specified. |
| 61 | Supplying and laying of CPVC pipes, 25 mm th SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors / walls complete all as specified. |
| 62 | S&F for 12 mm to 15 mm th WPC louver panel for wall panelling which is water proof, stain resistant,maintanance free, termite proof, tough and durable including cleats, clips, nails and L beading with the same shade as Lovers complete all as specified and directed by Engr - In - Charge. |
| 63 | Taking down copper/aluminium point wiring (light, fan, bell,socket or power) complete including fixture and fittings such as switches, ceiling roses, pendent, regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) and making good distrubed surfaces of walls, floors etc complete all as specified and directed at site. |
| 64 | M&L for point wiring with 1.5 Sq mm single core PVC insulated unsheathed copper FRLS multi stranded conductor cable in and including concealed PVC conduit of size 20/25mm ISI marked inclusive of tees, bend, elbows etc upto and including sunk in anodized pressed steel box for housing switch socket etc with white laminated 3 mm thick hylam sheet cover ISI marked of suitable size complete including PVC insulated multi stranded copper conductor 1.5 Sqmm FRLS cable as earth wire to common earth dolly for connection to ceiling rose to earth terminal including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed by Engr-in-charge for following :- |
| 65 | (a) One light point controlled by one, one way switch 5 Amps |
| 66 | (b) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator |
| 67 | (c) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board. |
| 68 | (d) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad. |
| 69 | S & F for switch piano type single pole 5 amp, 230 Volts complete all as specified and directed. |
| 70 | S & F for socket outlet 2-in-1, 5 pin, 5 amp, 230 Volts complete all as specified and directed. |
| 71 | S & F for ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fitting complete. |
| 72 | S & F for wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. |
| 73 | S & F Wall / surface mounted type LED light fitting batten type complete with LED lamp 10- watt (2 feet long), poly carbonate body and integrate electronic drive complete with all accessories internally pre-wired and including connecting up with twine core twisted flexible copper conductor cable complete all as specified and as directed. |
| 74 | S & F for exhaust fan made of styurdy engineering plastic body heavy duty single phase 250 mm sweep,50 HZ,RPM 1200 ,240 Volts, AC with and including louvers, mounting rings, MS rag bolt, washers etc and connecting from ceiling rose / connector with and including suitable size flexible copper conductor PVC insulated sheathed chord and duly making holes complete all as specified and directed at site. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysOct 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender