Tender For Special Repair To Perimeter Security Lts, Ug Cables And Connected Items At Fazilka Mil Station
Tender Value
20.71 Lakhs
Estimated cost
Bid Submission
23 Oct 2026
20 days left
EMD
42000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Fazilka → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Perimeter Security Lts, Ug Cables And Connected Items At Fazilka Mil Station
BOQ
| Sl. No. | Item Description |
| 1 | Supply and fixing cable junction box of Size 250mm x 200mm x100mm or any other higher size (Suitable for Pole mounting) complete with fixing accessories. Junction box should be insulated and made out of polycarbonate with glass fiber re-inforced material. The polycarbonate junction box shall be environment frinedly, recyclable, UV resistant, halogen and silicon free, anti acid and anti corrosive. The junction box knock out on four side wall and following specifications and all as directed by Engr-in-Charge :-(a) The junction box shall be rated for degree of IP 65 (ingress protection) in accordance with IEC 60529.(b) The gasket material shall be polyurethane or silicon and gasket shall be internally embedded.(c) Junction Box must meet the provision laid down in IEC 60998-1, IEC-60695-22, IEC 60670-2 to 5 and grey color according to RAL-9011/ 7035.(d) The manufacturer of junction box shall submit a copy of IEC certificate and glow wire test for 960 degree.(e) Junction box shall be fire retardant and self extiguishing in accordance with IEC60695-2 to 11, DIN VDE 0304 Part-3, UL94 V-2 flammability standard. (f) The impact strength of polycarbonate enclosures /boards i.e. the degree of protection against mechanical load shall be in accordance with EN 50298-98 for IK08. (g) Junction box shall have 4 pole tinned copper bus bar of size 25mmx3mm complete with one number 20Amp MCB SP 10KA (h) Manufacturer should submit routine test certificate for junction box. (j) Suitable size of mild steel Clamps and screws/nut bolt shall be used for fixing of Junction box.. |
| 2 | Supply & fixing LED of 70 Watt IP 66 Street lights fittings aerodynamically designed for all weather conditions with excellent thermal management, made up of pressure die cast housing with toughened glass and high power LED's with secondary and IP66 protection. 10 KV SPD included Efficacy ≥110/120 LPW complete all as specified and directed by Engineer-in-Charge |
| 3 | Excavation in trenches, not exc 1.5 m wide and n. exc 1.5 m depth for foundations of poles, struts, stays etc. or laying underground cable etc. in soft/loose soil, & getting out complete all as specified and directed by Engineer-in-Charge. |
| 4 | Excavation in trenches in any type of soil exceeding 1.5 mtr deep and not exceeding 3.0 mtr deep and not exceeding 1.5 mtr wide for laying of cables, RCC/Steel tubular poles/stays and struts etc getting out including trimming sides and forming bottom surface all as specified and directed at site. |
| 5 | Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25cm thick complete all as specified and directed by Engineer-in-Charge |
| 6 | Removal of excavated surplus material to a distance n. exc. 50 mtr away in layer n. exc. 25cm from the starting point all as direcet by Engr-in-Charge. |
| 7 | S&F 1.5 sqmm 3 core, 1100 volt grade heavy duty cable, PVC insulated copper multistranded conductor, served with inner sheathing of PVC tape and overall PVC sheathed for making connection for street light complete all as specified and directed |
| 8 | Supply and laying double wall corrugated pipe (DWCP), Non-metallic, resistance to compression : type 450, resistance to impact; normal, resistance to bending: pliable, resistance to external influence; ingress protection: IP 67, resistance against corrosion: without protection, resistance to flame propagation: non flame propagating, conforming to IS-16205 (part-24) 2017 including necessary jointing material i.e snap fit coupler with rubber ring, sealing plug, tees, bend, angel bend etc for passing electrical cable complete all as specified and directed by Engr - in charge.(a) DWC Pipe dia 77/63 |
| 9 | M & L for boring hole across the Road/plinth/hard standing by trench less technology method suitable for more than100mm bore pipe for 0.4 mpa working pressure for cable passing without damaging Road / Plinth /Floor with 100mm GI pipe complete all as specified and directed. |
| 10 | Supply and fixing bracket made out of GI tubing light grade 25mm dia, 1.5 metre long bent to shape at 120 degree angle at half metre from bottom, including two Nos clamps made out of MS Flat iron of size 25x4 mm with suitable nuts and bolts for holding/fixing of bracket on steel pole including painting to MS clamp and nut bolts with two coats of aluminium paint over a coat of red oxide primer, complete all as specified and directed by Engineer-in-Charge. |
| 11 | M& L for pre stressed concrete pole 9 mtr long 102mm x 172mm at top and 102 x279mm at bottom class 10, including painting of pole in alternate colour of yellow and black upto a height specified as per height specified as per IE rules and marking of pole number by using stencil complete all as directed by engineer-in-charge.Note:-1. Excavation and PCC will measured and paid separately. 2. Fornt and letter size for marking of pole number will be as per direction of engineer in charge. |
| 12 | Labour for disconnecting and taking out old unserviceable underground LT Cable alongwith stone patti/ cable cover/bricks/interlocking tiles etc from trenches/ floor/ road /pipe /along poles complete all as specified and directed by Engineer-in-Charge. Note :Excavation, earth work required for item shall be measured and paid separately under respective items of BOQ.(a) 10 Sqmm 4 Core |
| 13 | Labour for disconnecting and taking out old unserviceable underground LT Cable alongwith stone patti/ cable cover/bricks/interlocking tiles etc from trenches/ floor/ road /pipe /along poles complete all as specified and directed by Engineer-in-Charge. Note :Excavation, earth work required for item shall be measured and paid separately under respective items of BOQ.(a) 16 Sqmm 4 Core |
| 14 | Labour for disconnecting and taking out old unserviceable underground LT Cable alongwith stone patti/ cable cover/bricks/interlocking tiles etc from trenches/ floor/ road /pipe /along poles complete all as specified and directed by Engineer-in-Charge. Note :Excavation, earth work required for item shall be measured and paid separately under respective items of BOQ.(a) 25 Sqmm 4 Core |
| 15 | Supply, laying, Jointing and testing in trenches or fixing to wall/pole or passing through pipe and and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor , provn suitable size of luges for making the cable connection, including making good to all disturbed surfaces/flooring/road to match with existing specifications complete all as specified and directed.(a) 10 Sqmm 4 Core |
| 16 | Supply, laying, Jointing and testing in trenches or fixing to wall/pole or passing through pipe and and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor , provn suitable size of luges for making the cable connection, including making good to all disturbed surfaces/flooring/road to match with existing specifications complete all as specified and directed.(a) 16 Sqmm 4 Core |
| 17 | Supply, laying, Jointing and testing in trenches or fixing to wall/pole or passing through pipe and and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor , provn suitable size of luges for making the cable connection, including making good to all disturbed surfaces/flooring/road to match with existing specifications complete all as specified and directed.(a) 25 Sqmm 4 Core |
| 18 | M&L for cutting, trimming of branches along 2 pole/4 pole structure , OH Conductor of LT/HT line within 2 mts distance along both sides of structure /line complete all as directed by Engr-in-Charge. |
| 19 | Removal of bushes/plants/shrubs and taking out unsv cable or cover it properly by using cable cover or soil around the water supply or electric supply installation or near LT Panels , inside valve pits and surface excavation not exceeding 15 cm depth levelling the ground, removing excavated material outside the army cantt area complete all as specified and directed by Engr-in-Charge. |
| 20 | Supply and fix in replacement of GI pipe 40 mm bore light grade for protection of cable including provision of MS clamps, nut, bolts etc required for fixing pipe along pole / wall / laid under the road / laid under the floor or in trenches complete all as specified and directred by Engineer-in-Charge. Note: (i) Excavation & earth work shall be measured and paid separately under respective item of this Schedule. |
| 21 | Material and labour for Earthing complete with galvanised iron earth plate electrode of size 600 x 600 x 6 mm buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 metre below normal ground level, connected to and including GI earthing wire of size 4 mm dia by means of GI bolts/nuts/washers and protected by 15 mm bore GI light grade pipe upto test point or upto main switch board, HT/LT equipments, fixing with 02 Nos nuts and bolts and protection pipe fixed with and including flat iron clamps, bolts, nuts and washers. Earth plate shall be surrounded by alternate packed layer 15 cm thick of charcoal or coke and common salt all around bottom and top. 20 mm bore GI medium grade pipe for watering and including funnel, wire mesh, PCC chamber pit made with PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) including necessary form work, excavation and earth work in any type of soil, returning filling and disposal of surplus soil to a distance not exceeding 50m, Pit cover 40mm thick made with RCC (1:2:4) type B1 (using 20 mm graded stone aggregate) including TMT reinforcement 8mm dia @ 75mm c/c both way, MS handle 12mm dia, cover rest on MS angle iron frame 40x40x6mm embeded in concrete duly painted with two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified & shown in electrical plate No. 3 of SSR 2009 (Part-I) complete all as specified and as directed by Engineer-in-charge.Note:- (i) PCC chamber shall be constructed at least 1.5 metre away from the earth electrode and pipe for watering shall be provided in slanting manner. (ii) Protection pipe and GI earthing wire upto test point or upto electric equipment from top of earth plate shall be included in the unit rate of this item. (iii) The earth testing arrangement should be done by the contractor as per direction of Engineer-in-charge. |
| 22 | M&L for plain cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundation of PCC poles/struts as specified including necessary form work all as specified and directed. |
| 23 | M&L for plain cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate in foundation of stay assembly etc including necessary form work, all as specified and directed. |
| 24 | M&L for plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate for coping around poles , including necessary form work finishing even and smooth without using extra cement , all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 03, 2026
11:30 IST
Tender Published
Tender notice published.
TodayOct 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysOct 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender