Tender For Provn Of Two Toilet Near Bldg No P-89, Hardstanding Near Building No P-88, Cook House At Bldg No P-25D, Store Room At Building No P-158 And Special Repair/Replacement Of Ber Exhaust Fan At Vijay Durg Under Ge(Vd) Kolkata
Tender Overview
Project Description
Tender for Provn Of Two Toilet Near Bldg No P-89, Hardstanding Near Building No P-88, Cook House At Bldg No P-25D, Store Room At Building No P-158 And Special Repair/Replacement Of Ber Exhaust Fan At Vijay Durg Under Ge(Vd) Kolkata
BOQ
| Sl. No. | Item Description |
| 1 | (B/R PORTION)Site clearance as in soft and loose soil complete all as specified and as directed. |
| 2 | Excavation in trenches for foundation etc not exc 1.5m wide and not exc 1.5 m in depth in any type of soil complete all as specified and as directed. |
| 3 | Returning filling in including spreading levlling ,watering and well ramming in layers nexc 25cm thick complete all as specified and as directed. |
| 4 | Removal of excavated material to a distance nexc 50 m and depositing at a level nexc 1.5 m above the starting point complete all as specified and as directed. |
| 5 | M&L cement concrete (1:4:8) type D2 using 40mm graded stone aggregate as in foudation, filling, sub base and mass concrete all as specified. |
| 6 | M & L for RCC design Mix M-25 Using 20 mm greaded Stone Aggregate in Beams, cantilevers, bressummers, lintels over complete all as specified and as directed. |
| 7 | Formwork to soffits of suspended slabs such as Roof slab, Floor slabs, landings and simillar works; not exceeding 200mm thick complete all as specified and as directed. |
| 8 | M&L for TMT bars 10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with Mild Steel wire (annealed) not less than 0.9mm dia complete all as specified. |
| 9 | M&L for Mild steel bars 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders, cut to length, bent to shape required and binding with and including mild steel wire (annealed) not less than 0.9 mm dia for TMT bars complete all as specified and directed. |
| 10 | Supply only integral water proofing compound complete all as specified. |
| 11 | M&L old size brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1.6 complete all as specified and as directed. |
| 12 | M&L old size half brick work with sub class 'B' bricks straight or curved on plan to any radius built in cement mortar 1:4 complete all as specified and as directed. |
| 13 | M&L 40 mm thick for damp course to horizontal surfaces in cement concrete 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate incl all necessary form work complete all as specified and as directed. |
| 14 | M&L for broken stone or boulders Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified. |
| 15 | M&Lfor 75 mm thick Cement concrete type D-2, 1:4:8 (40mm graded aggregate) in sub base of floor complete all as specified and as directed. |
| 16 | M&L for screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4 laying floor finishes complete all as specified. |
| 17 | M&L for glazed coloured ceramic tiles in dado/vertical surface (350mm x250mm x 7 mm/450x300x7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match the surface complete all as specified and directed. |
| 18 | M&L for Non skid coloured tiles (square/rectengular) 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and as directed.. |
| 19 | M&L for Rendering 15 mm thick on brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement including mixing integral water proofing compound in the proportion as mentioned in manufacturer's instructions complete all as specified. (Water proofing compound to be measured and paid for separately). |
| 20 | M&L for Rendering 15 mm thick on brick work or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed. |
| 21 | Supply and fixing aluminium anodised window and ventilator shutters side hung type without sush bars , aluminium section weighting 0.55 kg/m including necessary joining cleats , glazing clips , rubber packing aluminium snap beading screws , anodised aluminium fittings such as peg stays 150mm long (01 Nos ) hinges typr B-21 100 m long (2 Nos ) Suitable handle (01) Nos etc .complete all as specified and as directed. |
| 22 | M&L for frosted, on one side sheet glass , Ordinary quality , 3 mm thick fixed to aluminium doors with aluminium and rubber beading in square n. exc .5 sqm in each pane , complete all as specified and as directed.. Please Enable Macros to View BoQ information |
| 23 | M&L for frosted, on one side sheet glass , Ordinary quality , 3 mm thick fixed to aluminium doors with aluminium and rubber beading in square n. exc .5 sqm in each pane , complete all as specified and as directed.. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender