Tender For Special Repairs/Replacement Of Conventional Fire Alarm Panel And Connected Components With Addressable Type At Rs Area Buildings R-5 To R-12, R-20 To R-23, R-25, R-27 To R-29, R-14 & R-15 Under Ge (Nw), Navy Nagar, Colaba, Mumbai
Tender Value
58 Lakhs
Estimated cost
Bid Submission
28 Oct 2026
24 days left
EMD
1.12 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs/Replacement Of Conventional Fire Alarm Panel And Connected Components With Addressable Type At Rs Area Buildings R-5 To R-12, R-20 To R-23, R-25, R-27 To R-29, R-14 & R-15 Under Ge (Nw), Navy Nagar, Colaba, Mumbai
BOQ
| Sl. No. | Item Description |
| 1 | Supplying, installation, testing and commissioning of addressable microprocessor-based 2-wire fault-tolerant loop fire alarm control panel, complying with BS EN 54, 2-loop networkable type (each loop capable of accessing a maximum of 99 detectors and 99 modules, up to 200 devices per loop), capable of displaying the location of all fire/fault signals with address on an LCD display unit, equipped with rectifier, loop cards, built-in power supply, and battery charger complete with maintenance-free SMF lead-acid batteries, including making all internal and loop connections, complete all as specified and directed. |
| 2 | Supplying, installation, testing and commissioning of addressable manual call point (MCP), resettable type, complete with mounting box, addressable module/circuitry, testing key, and connections, complete all as specified and directed. |
| 3 | Supplying, installation, testing and commissioning of addressable electronic sounder cum strobe, producing a minimum sound output level of 90 dB at 1.5 metres, with visual flashing strobe, complete with addressable loop module, base, mounting, and connections, of approved make (Morley-IAS by Honeywell / Bosch / Apollo or equivalent), complete all as specified and directed. |
| 4 | Supplying, installation, testing and commissioning of addressable multisensor detector (optical smoke and thermal/heat combination), complying with and type certified to EN 54 standards, complete with mounting base, LED indicators, addressable circuitry, and loop connections complete all as specified and directed. Make-Morley-IAS by Honeywell / Bosch / Apollo. |
| 5 | Supply and fixing of MCB, 16 Amp,Double pole, 10 kA, ‘C’ curve, complete with factory-made stainless steel enclosure, suitable for wall mounting, including necessary connections, testing and commissioning, complete all as specified and directed by the Engineer-in-Charge. |
| 6 | Supply and fixing of red-coloured PVC insulated, PVC sheathed, armoured copper conductor cable of size 2 Core × 1.5 sq.mm, including fixing on walls with suitable saddles at intervals not exceeding 60 cm, complete all as specified and directed by the Engineer-in-Charge. |
| 7 | Supplying, installation, testing and commissioning of fire alarm sounders / sirens, electronic type, horizontal, two-stage, continuous normal operation for at least 50 minutes, with sound level 65 dB to 120 dB measured at 1.5 metres, with sound output variation of ±5 dB, 1500 m effective audio range, complete with all mounting accessories, control/loop connections, and audio level testing, of approved make (such as Morley-IAS by Honeywell / Bosch / Apollo or equivalent), complete all as specified and directed. |
| 8 | Taking down of manual call points, horn-cum-strobe units, multi-sensor detectors, fire alarm sounders and MCBs in any position, including disconnecting electrical connections and making good the disturbed surfaces, complete all as specified and directed by the Engineer-in-Charge. |
| 9 | Taking down of Fire Alarm Control Panel complete, including disconnecting electrical connections, removing from existing mounting and making good the disturbed surfaces, complete all as specified and directed by the Engineer-in-Charge. |
| 10 | Taking down of PVC insulated, PVC sheathed, armoured fire alarm cable with copper conductor, 2 core, 1.5 sq.mm size, 1100 V grade, including disconnecting and removal from existing installation, complete all as specified and directed by the Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 24 daysOct 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 25 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender