Tender For Comprehensive Maintenance Of B/R Works Including Joinery, Plumbing, Carpentry, Masonry, Ms Works, Rolling Shutters, Roller Blinds And Associated Works In The Area Under Age B/R-I, Nd Mbi.
Tender Value
80 Lakhs
Estimated cost
Bid Submission
28 Oct 2026
0 days left
EMD
1.45 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Maintenance Of B/R Works Including Joinery, Plumbing, Carpentry, Masonry, Ms Works, Rolling Shutters, Roller Blinds And Associated Works In The Area Under Age B/R-I, Nd Mbi.
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: COMMANDER WORKS ENGINEER (NAVAL WORKS) MUMBAI Name of Work : COMPREHENSIVE MAINTENANCE OF B/R WORKS INCLUDING JOINERY, PLUMBING, CARPENTRY, MASONRY, MS WORKS, ROLLING SHUTTERS, ROLLER BLINDS AND ASSOCIATED WORKS IN THE AREA UNDER AGE B/R-I, ND MBI. Contract No: 8554/CWE (NW) MUMBAI/E8 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Item Code / Make Quantity Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Taking down cement or cement lime plaster, any description, on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc., including removal of rubbish and debris off MD premises, complete all as specified and directed. |
| 3 | Material and Labour for rendering 15 mm thick on fair faces of brickwork or concrete surfaces in cement mortar 1:6, including providing Sagol finish on the plastered surface and finished even and smooth complete all as specified and directed. |
| 4 | Material and Labour for rendering 20 mm thick on stone masonry surfaces or surfaces other than fair face of brickwork (external wall surfaces), consisting of 10 mm thick base coat in cement mortar 1:4 and 10 mm thickness in cement mortar 1:4,finshing coat mixed with integral water-proofing compound at 3% by weight of cement (or as per manufacturer's instructions),including necessary scaffolding and safety arrangement complete all as specified and directed (Note: Water-proofing compound shall be measured and paid for under a separate schedule item). |
| 5 | Supply only integral waterproofing compound (powder) complete all as specified. |
| 6 | M&L for rendering 20 mm thick ready-mixed cement-based plaster in two coats (12 mm thick base coat and 8 mm thick finishing coat) on external walls of any description, using ready-mixed cement-based plaster having a minimum cement-to-sand composition of 1:4, manufactured using fully treated, dry and well-graded natural sand suitable for external plastering, having low rebound properties and low water demand, mechanically mixed with water in a metallic tray to achieve the required workability and consistency in accordance with the manufacturer's specifications, and applied over external concrete and masonry surfaces, including preparation of surfaces, necessary curing, erection and dismantling of scaffolding and all incidental works, complete all as specified and directed by the Engineer-in-Charge. |
| 7 | M&L for rendering 15 mm thick ready mixed cement based plaster on internal walls of any description, Ready mixed cement based plaster should having minimum composition of cement & sand 1:4 using fully treated dry, well graded natural sand suitable for internal plastering having low rebound properties, low water demand for curing properties, mechnical mixing with water in a metalllic tray only to made good workability, consistency as per the specification of the manufacturer and applied over exterior wall & concrete /masonary surfaces complete incl erection and dismantling of scaffolding etc complete all as specified and directed. |
| 8 | M&L for new or previously untreated surfaces of any description & applying two coats of acrylic (antifungal) exterior grade 100 % acrylic paint of over one coat of self primer complete all as specified and directed |
| 9 | M&L for rendering 10mm thick in CM 1:3 on fair faces of concrete surfaces in ceiling surface complete all as specified and as directed |
| 10 | M & L for preparing new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer over 3mm thick wall care putty complete all as specified and directed. |
| 11 | M&L preparation of new plastered surface of ceiling and applying three coat of white wash on ceiling complete all as specified and directed. |
| 12 | M&L prepration of old decorated surfaces of walls and applying one coat of oil bound distemper complete all as specified and directed. |
| 13 | M&L for preparation of old wall surfaces of any description & applying one coats of acrylic (antifungal) exterior grade paint including necessary scaffolding complete all as specified and directed |
| 14 | Dismantling floor hearth or wall tiling, including cement mortar bedding (but not backing), removing rubbish outside MD land. |
| 15 | M&L for vitrified ceramic tiles 9-10mm thick (600 x 600 mm) polished area of each tiles not exceeding 0.36 Sqm, in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface laid over and including 20mm thick screed bed or bedding layer in CM 1:4 complete all as specified and directed. Note : Engr-in-Charge will select sample from latest catalouge. |
| 16 | Ditto all as per item No. 14 above but as in skirting including 10mm thick rendering in CM. 1:4 as backing coat complete all as specified and directed. |
| 17 | M & L for Non skid coloured ceramic tiles 7 to 8 mm thick ( square/ rectangular) area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tiles laid over and including 15mm thick screed bed in CM 1:4 complete all as specified. |
| 18 | M & L for Non skid coloured ceramic tiles 7 to 8 mm thick ( square/ rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tiles over and including 15mm thick screed bed in CM 1:4 complete all as specified. |
| 19 | M & L for Coloured glazed ceramic tiles in vertical surface 450 X 300 X 7-8 mm thick set and jointed in neat cement paste and pointed in coloured cement to match the shade of the tiles with and including 10 mm thick backing coat in CM 1:3 complete all as specified. |
| 20 | Dismantling of Stone slabs and tiles/ Interlocking paver blocks of any description or thickness in floors, aprons laid, bedded and pointed in any mortar and removing rubbish off the premises (outside MD land) complete all as specified and directed |
| 21 | M & L for Mirror polishing of marble, granite, Kota stone, stonework and mosaic tiles, wherever required, to achieve a high-glossy finish, complete as specified and directed by the Engineer-in-Charge. |
| 22 | M & L for Hard wear stone (of any type) granite stone slab 18-20mm thick in flooring machine cut, machine polished bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types and including 15mm thick screed bed in CM 1:4 complete all as specified. |
| 23 | M&L for cement concrete tiles 25CmX25CmX22-25 mm thick, machine pressed,(with grey cement & no pigments), set jointed and pointed in neat cement slurry in floors laid over and including 15 mm thick bedding layers in CM 1:3 complete all as specified & directed by Engineer-in-charge |
| 24 | Dismantling of wall and ceiling boards (fibre, pulp, insulation) or insulation boards, false ceiling, wall panneling & partation boards bonded wool, blanket slab incl aluminium grid frame work complete all as specified and as directed |
| 25 | M & L for Anodised aluminium snap grid frame work for false ceiling of grid size 605X605 mm with Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long with 4mm thick calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm size opening etc complete all as specified and directed by Engineer-in-charge. |
| 26 | M&L for POP false ceiling using 600 x 900 x 12 mm thick plaster of paris with gypsum binder sheet decorative type and necessary provision for concealed type light fittings, fixed on 22 gauge GI channel grid work main joist of size 50 x 25 mm spaced at 750 mm centre, secondary joist of size 75x20 mm fixed to main joists spaced t 900 mm suspended to roof members using 25 x 25 x 2 mm GI angles and fasteners @ 1.2 m C/C including decorative design/pattern all as specified and directed Engr-in-Charge. |
| 27 | Taking down chowkats or frames but with shutter (without taking off shutter from the frame) exc 1.5sqm but n.exc 4 sqm each complete all as specified and as directed |
| 28 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) area n.exc 1.5 sq. m each complete all as specified and directed. |
| 29 | Supply & fixing in repairs powder coated aluminium sections for partitions, windows, ventilators and doors including fabrication of frame/shutters and fixing to walls/floors with necessary lugs, cleats etc including all accessories such as glazing clips, handles, tower bolts, rollers rubber beadings for fixing glass panes in frame including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required complete all as specifiedNote: - (i) Glass panes will be measured & paid separately. (ii) The rate quoted shall be inclusive of neoprene beading, glazing clips, screws, etc. as required but shall not be measured for arriving of weight.(iii) Minimum thickness of powder coating shall be 25 micron. (iv) The rate shall be inclusive of the locking arrangement including complete packing with silicon gel around contacting surface of aluminium work with matching existing area.(v) The size of aluminium sections shall be as per HQ CE(N) MZ TD drawing No TD/2021/01 to 05 . |
| 30 | Material and Labour for 4.8 mm thick plain sheet glass, ordinary quality, in squares not exceeding 0.5 sqm in each pane, and glazing with aluminium and neoprene beads, complete all as specified and directed. |
| 31 | S&F in repair aluminum anodised GRILL (Deco grill DG 103 of 7.5 mm thick of M/s ELESAR FOCCHI Ltd.) fixed with suifable 'F' section No. 8584 15.30 x 23.40 x 1.40mm fabricated and rivetted to aluminum windows, complete all as specified and directed by Engr-in-charge. |
| 32 | S & F in repairs 12 mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative lamination and other side white, including 6 mm thick teak wood beading all around, fixed with screws to framework, complete all as specified and directed. |
| 33 | Taking down eaves gutters and rainwater pipes( any size or pattern) or any other pipes , including all fittings, heads, shoes, bends , swan necks, etc, removal to store (measured overall as fixed along the centre line over fittings and accessories). |
| 34 | Supply & Fixing 110mm bore PVC ( SWR) grade pipes, single socketed in any length with rubber ring joints fixed to walls with dash through fastners and rain water bracket suitable for 110mm bore pipe spacing 1.5m c/c as per CE (Navy) Mumbai TD No TD/2023/01 or laid in floor complete all as specified. Note : Clamping Shall be measured and paid separately under relevant BOQ items |
| 35 | Supplying and fixing PVC (SWR) bend, 110 mm bore, any radius, complete all as specified and directed. |
| 36 | Supplying and laying in trenches or fixed to walls, cast iron soil, waste, and vent pipes (sand cast pipes) of 100 mm nominal bore, in any length, with or without ears, jointed with and including cement joints,complete all as specified and directed. |
| 37 | Supplying and laying in trenches or fixed to walls, cast iron soil, waste, and vent pipes (sand cast pipes) of 75 mm nominal bore, in any length, with or without ears, jointed with and including cement joints,complete all as specified and directed. |
| 38 | Supplying and fixing cast iron bends (any radius), diminishing pieces, or tapers (larger bore measured) of 75 mm nominal bore, fitted with and including oval access doors, jointed with and including cement joints to match the adjoining pipes,complete all as specified and directed. |
| 39 | Supplying and fixing cast iron bends (any radius), diminishing pieces, or tapers (larger bore measured) of 100 mm nominal bore, fitted with and including oval access doors, jointed with and including cement joints to match the adjoining pipes,complete all as specified and directed. |
| 40 | Supplying and fixing in repairs, cast iron Nahani trap, 75 mm nominal diameter of outlet, with cast iron or other approved grating, including jointing to waste pipe, embedding and fixing the trap in cement concrete Type B-1 (1:2:4) complete all as specified and directed. |
| 41 | Supplying and fixing in repairs, cast iron Nahani trap, 100 mm nominal diameter of outlet, with cast iron or other approved grating, including jointing to waste pipe, embedding and fixing the trap in cement concrete Type B-1 (1:2:4) complete all as specified and directed. |
| 42 | Supplying, laying, and jointing galvanised steel water tubes, medium grade, 15 mm nominal bore, including fittings (including bends, elbows, tees, short pieces, connectors, back-nuts, nipples, caps, plugs, and unions), complete all as specified and directed. |
| 43 | S&F in repairs vitreous china urinal, half stall type complete including providing and fixing plugs bedding urinal against wall in cement mortar in 1:2 securing urinals to plugs with and including 60 mm brass screws, pointing around urinal back in cement , fixing with automatic flushing system with brackets, flush pipes, inlet ,outlet etc complete all as specified and directed. |
| 44 | S&F in repairs 32 mm dia. PVC waste pipe for WHBs and urinals, fixed in position, complete all as specified and directed by the Engineer-in-Charge. |
| 45 | Supplying and fixing in repairs, fancy type bib taps of cast copper alloy, 15 mm nominal bore, with crutch or butterfly handle, screwed down, chromium plated, including jointing to iron pipes or brass ferrules, complete all as specified and directed. |
| 46 | S&F fixed in repairs Wash hand basin vitreous china (flat back) size 550 x 400 mm including brackets 32 mm bore CP brass waste coupling , CP brass bottle rap 32 mm bore and making all connections complete all as specified and directed |
| 47 | S&F fancy type pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed in repairs of 15 mm bore pipe etc complete all as specified and directed. |
| 48 | S&F in repairs vitreous china water closet squatting pan (Orissa pattern), size 580 x 440 mm, white, with integral foot rests, (excluding flushing cistern and flush pipe), including P or S trap, lime contrete bedding and connection to trap, flushing pipe and anti-syphonage pipe and making good to floor, complete all as specified and directed. |
| 49 | Supplying and fixing in repairs, Vitreous China wash down water closet pan (pedestal pattern), white, size 580 mm, including connecting to drain or outgoing pipe, flushing pipe, and anti-syphonage pipe (but excluding flushing cistern and flush pipe), complete all as specified and directed. |
| 50 | Supplying and fixing in repairs, plastic water closet seat with cover for pedestal pan, black or white, closed pattern with flat bottom, including mild steel chromium-plated or aluminised hinging device, complete all as specified and directed. |
| 51 | Supplying and fixing in repairs, PVC valveless, syphonic action type, flushing cistern, low level, white, 10 litres capacity, conforming to IS 7231, with inlet, ball valve, float and handle including brackets,, complete all as specified and directed. |
| 52 | Supplying and fixing in repairs15 mm size PVC connection, with PTMT nuts, 450 mm long, complete all as specified and directed. |
| 53 | Supplying and fixing 600 mm x 450 mm bevelled edge mirror of selected quality glass,6 mm thick mounted on PVC body (or 6 mm thick building board/plywood), fixed to wooden or plastic plugs with chromium plated brass screws and cup washers and making good of disturbed surface as per existing complete all as specified and directed. |
| 54 | Taking down shutters of any description exc 1 sqm and n exc 2 sq.m each complete all as specified and directed. |
| 55 | S&F 2nd class hard wood glazed and skelton shutter 30 mm thick divided into squares with plain chamfered or rounded mitred and rebated without sash bars with edges of shas bars and frame moulded, fitted with out and mitred beeds for screwing glass/guage etc size of members of shutters as specified in SSR Part-I Section 8.20 (b) all as specified and directed. |
| 56 | S&F 35mm thick second class hard wood, plain framed, paneled shutter of 9mm BWP comercial ply or 12mm veneered particle board with comercial veneering on both faces the size of rail land stile as per IS 1003 (Part-I) killn seasoned and chemically pressure treated . |
| 57 | S&F 2nd class hard wood (Sal) plain solid, straight, chowkats and frames wrought framed rebated on the solid , rounded or chamfered put together with glue pinned at joints. |
| 58 | S&F mild steel flat iron 25 x 3 mm such as in hold fast etc or similar small articles conforming to Fe- 410-0 or 310-0. |
| 59 | S & F 100 mm butt hinges,Stainless steel,mediu weight with mild steel hinge pin, bright polished and fixed, type B-11 |
| 60 | Supplying and fixing aluminium anodised barrel tower bolts, of extruded section, 200 mm long,ISI marked complete all as specified and directed. |
| 61 | Supplying and fixing aluminium anodised barrel tower bolts, of extruded section, 150 mm long,ISI marked complete all as specified and directed. |
| 62 | Supplying and fixing 300 mm long aluminium alloy, anodised, sliding door bolt,ISI marked with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy, and fixed, complete all as specified and directed. |
| 63 | Supplying and fixing 140 mm long floor door stopper,ISI marked , of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified and directed. |
| 64 | Supply & Fixing extruded aluminium alloy handles 150 mm size,ISI marked, fabricated type, anodised complete all as specified and directed by the Engineer-in-charge. |
| 65 | Supply & Fixing extruded aluminium alloy handles 100 mm size,ISI marked, fabricated type, anodised complete all as specified and directed by the Engineer-in-charge. |
| 66 | Material and Labour for preparation of new or previously untreated wooden surfaces over 10 cm in width or girth, including knotting and stopping, and applying one priming coat of pink primer and two coats of synthetic enamel paint, complete all as specified and directed. |
| 67 | Material and Labour for 12 mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative lamination and other side white, in repairs, including 6 mm thick teak wood beading all around, fixed with screws to framework, complete all as specified and directed. |
| 68 | Supply & fixing solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & manufacturers instructions,complete all as specified and directed. |
| 69 | S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement forstyle and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement supply & fixing in the frame at site, complete all as specified and directed. |
| 70 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.4mm etc complete all as specified and diected. |
| 71 | S&F in repairs 4 mm thick Bakelite sheet with decorative choice laminate on both sides, complete in all respects as specified and as directed by the Engineer-in-Charge. |
| 72 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by the Engr in charge. |
| 73 | Supplying and fixing, mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work, conforming to Fe 290 Gde E-165, including all fabrication, forging, reducing to required size, shape and figure, drilling, tapping, punching, and including all necessary screws, spikes, nails and bolts, hoisted and fixed in position complete, all as specified and directed. |
| 74 | Material & Labour for preparation of new steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chromate primer complete all as specified and directed. |
| 75 | Material and Labour for preparation of old painted steel or iron surfaces of any description, exceeding 10 cm in width or girth and applying one coat of synthetic enamel paint of approved shadecomplete all as specified and directed. |
| 76 | Supplying and fixing expanded metal, weight per square metre not exceeding 4 kg, cut to length, bent to shape required, tying with and including annealed mild steel wire not less than 0.9 mm diameter or fixing with galvanised steel staples, supplied and fixed complete to wood or steel members, complete all as specified and directed. |
| 77 | Demolition of brickwork or stone/boulder masonry built in cement mortar or cement lime mortar, including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stonework and precast concrete articles,including removing debris and rubbish off MD premises complete all as specified and directed. |
| 78 | Materials and Labour for brickwork with sub-class ‘B’ bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar (1:6), complete all as specified and directed. |
| 79 | Supply & fixing in repairs stainless steel decorative railing chains of alloy grade 316, having a minimum thickness of 8 mm, of approved design and pattern, used for connecting two stainless steel posts, including hooks and all necessary accessories, welding, buffing, polishing and fixing, complete in all respects as specified and directed by the Engineer-in-Charge. |
| 80 | S&F in repairs roller venitian blinds made of standard-quality cloth of approved texture, including all necessary accessories, fittings and fixtures, complete in all respects as specified and directed by the Engineer-in-Charge.Note: The net area of the cloth covering the window shall be measured for payment. |
| 81 | Supplying and fixing of rolled mild steel of Grade Fe 410-W (Gde E-250) Quality-A, as in plates (plain or chequered) or channels, square cut or notched, including forming holes (ordinary and countersunk), without any attachment all as specified and directed. |
| 82 | Providing and laying waterproofing treatment in sunken portions of WCs, bathrooms, etc. by applying cement slurry mixed with waterproofing cement compound consisting of the following operations, complete all as specified and as directed:(a) First layer of cement paste using cement @ 0.488 kg/sqm mixed with waterproofing compound @ 0.253 kg/sqm. The layer shall be allowed to air cure for 4 hours followed by water curing for 48 hours..(b) Second layer of cement paste using cement @ 0.242 kg/sqm mixed with waterproofing cement compound @ 0.126 kg/sqm. The layer shall be allowed to air cure for 4 hours followed by water curing for 48 hours.(c) Complete with filling PCC 1:7:12 type F2 using 40 mm thick graded stone aggregate.Note: The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry, complete all as specified and as directed.2_ Work shall be carried out through authorised applicator of water proofing only, each stages shall be recorded and mentioned in a stage passing register which shall be duly endosed by E-In-c before payment of RAR |
| 83 | Removing debris exc. 1.50 Km but n exc. 20 Km and depositing where directed, in soil outside MD land. |
| 84 | Supply & Fixing double action floor spring, hydraulically regulated, with minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, brass governing pivot and heavy duty mild steel parts, fixed complete, all as specified and directed. |
| 85 | Supplying and fixing solar control film, 25 micron, reflective type, sticked to glass panes as per instructions of manufacturers, complete all as specified and directed. |
| 86 | Supplying and fixing in repairs fancy type, chromium-plated stop valves, cast copper alloy, screwed down, high pressure, 15 mm nominal bore, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed. |
| 87 | S&F in repairs health faucet (jet) with 1 m long PVC flexible tube, complete with chromium-plated wall hook, suitable for connection to 15 mm bore stopcock, including all necessary fittings and accessories, complete in all respects as specified and directed by the Engineer-in-Charge. |
| 88 | S&F 10 mm thick toughened glass for hinged doors, partitions, automatic doors and similar works, including cutting to required size and shape, drilling of necessary holes and all other required works, complete in all respects as specified and directed by the Engineer-in-Charge. |
| 89 | S&F in repairs stainless steel of 600 mm size for toughened glass doors, including stainless steel locking arrangement and all necessary fittings, fixtures and accessories, complete in all respects as specified and directed by the Engineer-in-Charge. |
| 90 | Dismantling plain or corrugated steel/AC roof sheets any gauge, thickness, including Nainital or similar pattern roof covering all as specified and directed. |
| 91 | S&F pre-painted hot- dip aluminium-zinc alloy metallic coated corrugated steel sheet, any pattern corresponding to IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ150, 0.5 mm thick, of an approved colour and having yield strength of 550 MPa as in roof covering fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor for height of building exceeding 10 metres but not exceeding 20 metres complete all as specified and as directed. |
| 92 | Supplying and fixing structural mild steel work in roof trusses (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections), including distance pieces, cleats, gusset plates, bolts, nuts, and washers, complete all as specified and directed. |
| 93 | M&L for 1.5 mm thick galvanised steel sheet for facia of roof, window chajjas and valley gutters, fixed over MS brackets with rivets or other suitable fixing arrangements, in any required shape, design or profile with the desired slope, including cutting, drilling of holes, making of designs and all necessary works, complete in all respects as specified and directed by the Engineer-in-Charge. |
| 94 | Material and Labour for plain cement concrete Type B-1 (1:2:4 nominal mix, using 20 mm graded stone aggregate), in roof or chajja padding for maintaining slope, laid and finished to required levels and falls, including curing, complete all as specified and directed. |
| 95 | Disconnecting existing water tanks of any capacity, including setting aside or lowering, wherever required, for carrying out repairs, and thereafter hoisting, reconnecting and refixing the tanks in their original position, including all necessary dismantling, handling, lifting and refixing works, complete all as specified and directed by the Engineer-in-Charge. |
| 96 | Material & Labour for complete removal of existing waterproofing treatment, including APP membrane and tiles of any description and in any position, including dismantling, cleaning, wire brushing, watering and removal of all debris from the site. and approved by the Engineer-in-Charge, complete all as specified and directed by the Engineer-in-Charge. Note : Debris shall be transported outside MD land and disposed of at a location identified by the Contractor. |
| 97 | Material and Labour for brushing neat cement slurry with 3.0 kg of cement per square metre on concrete surfaces, complete all as specified and directed. |
| 98 | M&L for water proofing treatment to RCC roof slab all as specified below and as directed:-a) Apply one coat of bituminous primer @0.25 Kg/Sqm.(b) Apply a coat of blown type bitumen grade 85/25 heated to working temperature of 180 degree centigrade and applied at 1.20 Kg/Sqm of the surface area.(c) Laying APP polymer modified membrane 4mm thick with non woven polyester reinforcement weighing not less than 4.00 Kg/ Sqm applied by torch application method.The APP membrane shall be laid using torch application method with minimum 100 mm side overlap and 150 mm end overlap and ensure that a constant flow of bitumen is maintained across the whole width of a role and that a bead of bitumen is extruded from all edges to obtain a good seal.The APP membrane shall be taken upto minimum 200 mm on vertical surfaces. All the edges of the membrane shall be sealed with sealant. The rain water gutter portion shall be finished with cement mortar 1:4 to provide requisite slope towards rain water pipe outlet.(d) Apply a coat of blown type bitumen grade 85/25 heated to working temperature of 180 degree centigrade and applied at 1.20 Kg/sqm of the surface area.(e) Apply two coats of solar reflective bituminous aluminium paint @ 0.10 kg /sqm/coat Note-(a) Work shall be carried out through authorised applicator of water proofing manufacturer only, a certificate in this regards shall be kept in records. (b) GE shall assume all stages are checked & document through a stage passing register, which shall be kept on record before payment of RAR. |
| 99 | Material and Labour for Chequered cement concrete tiles 25 cm x 25 cm x 22 mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment, over and including 20 mm thick screed bed in cement mortar 1:6, complete all as specified and directed. |
| 100 | S&F 3mm thick Aluminum Composite panel cladding plain metallic of approved colour/shade to any area and in any shape including cutting,notching,bending to shape as required jointing with silicon gel of approved colour & Aluminum tubular hallow section 25x25 mm not exceeding 900mm c/c to hold ACP cladding etc including removal of old patti of wooden(Note : colour/pattern of ACP sheet shall be given by GE). |
| 101 | Demolition of unreinforced cement concrete of any description and in any position, not otherwise specifically provided for, complete all as specified and directed. |
| 102 | Taking down existing mild steel rolling shutters for shutters of area not exceeding 10 m² each, including replacing slats, bottom lock plates, helical springs, side guides, sponge rubber gaskets, hood cover, side brackets and other components wherever required, and refixing the shutters in their original position after repairs, including material and labour for greasing and servicing of all existing and new mechanical parts, complete all as specified and directed by the Engineer-in-Charge, |
| 103 | Ditto all as per Item No. 101, but for rolling shutters having an area exceeding 10 m² and not exceeding 20 m² each, complete all as specified and directed by the Engineer-in-Charge |
| 104 | Ditto all as per Item No. 101, but for rolling shutters having an area exceeding 20 m² each, complete all as specified and directed by the Engineer-in-Charge.Note: Supply of replacement parts for S.R.L. Item Nos. 101, 102 and 103 shall be measured and paid for separately. |
| 105 | S&F factory-fabricated mild steel (hardened) helical wire spring, 300 mm long and 80 mm dia, to match the existing spring, complete all as specified and directed by the Engineer-in-Charge. |
| 106 | S&F factory-fabricated mild steel (hardened) helical wire spring, 400 mm long and 80 mm dia, to match the existing spring, complete as all specified and directed by the Engineer-in-Charge. |
| 107 | S&F factory-fabricated mild steel (hardened) helical wire spring, 450 mm long and 80 mm dia, to match the existing spring, complete as all specified and directed by the Engineer-in-Charge. |
| 108 | S&F factory-fabricated mild steel (hardened) helical wire spring, 600 mm long and 80 mm dia, to match the existing spring, complete all as specified and directed by the Engineer-in-Charge. |
| 109 | S&F factory-fabricated new guides and side brackets for rolling shutters, made of minimum 1.25 mm thick mild steel sheet of grade Fe-310 or Fe-410, of required length to match the existing ones, including one shop coat of red oxide primer, complete all as specified and directed by the Engineer-in-Charge. |
| 110 | S&F factory-fabricated new mild steel slates of 1 mm thickness, grade Fe-410-0 or Fe-310-0, to match the existing slates, including locking clips and riveting to the slates, and one shop coat of red oxide primer, complete as specified and directed by the Engineer-in-Charge. |
| 111 | S&F factory fabricated mild steel of grade Fe-410-0 or Fe-310-0 2.5mm thick bottom lock plate riveted and made of mild steel sheet of 1mm and welded with and including provision of standard locking arrangement welded to and including mild steel angle iron complete to match with existing with and including one shop coat of red oxide primer complete all as specified and as directed |
| 112 | S&F factory fabricated hood cover of mild steel 0.5 mm thick hexagonal, square or circular shape fitted to existing angle iron stiffness at bottom edge and to bracket plate all as directed and applying one shop coat of red oxide primer complete all as specified amd directed. |
| 113 | S&F in repair mild steel factory made bevel gear box with machine cut gears suitable for rolling shutters as fixed in repairs complete all as specified and as directed. |
| 114 | S&F in repair mild steel pressed beval handles 150mm long, oval type, enamelled black all as specified and as directed. |
| 115 | Supplying and fixing mild steel safety lever locks with 4 levers for rolling shutters, complete all as specified and directed. |
| 116 | M&L for removing rust by pickling, scraping, cleaning, etc., and greasing and easing mild steel rolling shutters in position to ensure full movement and easy operation, for shutters of area not exceeding 10 m² each, complete as specified and directed by the Engineer-in-Charge.Note: For the purpose of measurement and payment, greasing and easing in position shall be considered each time. |
| 117 | M&L for removing rust by pickling, scraping, cleaning, etc., and greasing and easing mild steel rolling shutters in position to ensure full movement and easy operation, for shutters of area exceeding 10 m² and not exceeding 20 m² each, complete as specified and directed by the Engineer-in-Charge.Note: For the purpose of measurement and payment, greasing and easing in position shall be considered each time. |
| 118 | M&L for removing rust by pickling, scraping, cleaning, etc., and greasing and easing mild steel rolling shutters in position to ensure full movement and easy operation, for shutters of area exceeding 20 m² each, complete as specified and directed by the Engineer-in-Charge.Note: For the purpose of measurement and payment, greasing and easing in position shall be considered each time. |
| 119 | S&F in repair rolling shutter with/without ball bearing, thickness of laths 1.25mm as specified including top cover, anchoring rod, hasp and staple, gear operated type with with bevel gear box and crank handle and one shop coat of primer erected in position as directed. |
| 120 | Material & Labour for preparation of new steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of Aluminium paint over a coat of primer complete all as specified and directed. |
| 121 | Material and Labour for preparation of old painted steel or iron surfaces of any description, exceeding 10 cm in width or girth and applying one coat of aluminium paint of approved shade (ordinary tint)complete all as specified and directed. Total in Figures 0.0 23 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayOct 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender