Tender For Special Repairs To Sluice No: 52,56 Musandipudukulam Of Tirunelveli Taluk In Tirunelveli District.
Tender Value
5 Lakhs
Estimated cost
Bid Submission
16 Oct 2026
12 days left
EMD
5000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tirunelveli → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repairs To Sluice No: 52,56 Musandipudukulam Of Tirunelveli Taluk In Tirunelveli District.
BOQ
| Sl. No. | Item Description |
| 1 | Fabricating, supplying and erection of Screw Gearing steel shutters of size 0.45 m x 0.45 m with consists of skin plate made out of 8 mm thick mild steel plate and horizontally stiffened with 100 mm x 50 mm x 6 mm steel channel (ISMC) at an interval of not more than 0.5 m and vertical stiffeners made out of same section at an interval not more than 0.5 m and provided with 8 mm thick mild steel gusset plate of required size on both sides fastened with rust free bolts and nuts etc. Groove Channels of ISMC 65 mm x 65mm x 6mm mild steel angle for required height including welding hold fast of size 40 mm x 40 mmx 6 mm mild steel angle 3 numbers on both sides. providing of 50 mm dia screw rod made of mild steel duly machined and fully threaded to suite the Head set assembly with required height and required holes. Fixing the screw rod to the shutter gusset plate with required bolts and nuts in proper alignment to the Head Set. Providing of Top Beam made up of 150 mm x 75 mm x 6 mm (ISMB 150) duly drilled to suite the Providing Head Set assembly with required bed bolts made out of 25 mm mild steel round rod duly threated with suitable anchorage arrangements to the height of 0.6 m with necessary fish plate made out of 16 mm mild steel plate of size 0.2 m x 0.3 m 4 numbers with require bolts. Providing Head set assembly medium duty with Hexagonal nut (approximate 50 kg) made up of cast iron including moulding, machining and Hexagonal nut threaded to suit screw rod provided with thrust bearings for smooth operation. The whole shutter assembly should be painted with two coats of anti-corrosive black paint over one coat of red oxide primer paint. Erecting Shutter including cr+D8ane hire charges (As per SR p .257) The rate is inclusive of all materials, labour charges including Lathing, Drilling, Welding, Gas cutting, Hydraulic bend removing of M.S. rod, hire charges of Crane and also inclusive of cost of covering plate, Foundation bolts, all bolt and nuts, conveyance to this site, Loading and unloading charges, Grease packing, Lubricating oil, Operating key, Locking arrangement and checking the Shutter operation etc., inculuding the cost of old retrivable materials complete as directed by the Departmental Officers. B6 |
| 2 | bolts and nuts etc. Groove Channels of ISMC 65 mm x 65mm x 6mm mild steel angle for required height including welding hold fast of size 40 mm x 40 mmx 6 mm mild steel angle 3 numbers on both sides. providing of 50 mm dia screw rod made of mild steel duly machined and fully threaded to suite the Head set assembly with required height and required holes. Fixing the screw rod to the shutter gusset plate with required bolts and nuts in proper alignment to the Head Set. Providing of Top Beam made up of 150 mm x 75 mm x 6 mm (ISMB 150) duly drilled to suite the Providing Head Set assembly with required bed bolts made out of 25 mm mild steel round rod duly threated with suitable anchorage arrangements to the height of 0.6 m with necessary fish plate made out of 16 mm mild steel plate of size 0.2 m x 0.3 m 4 numbers with require bolts. Providing Head set assembly medium duty with Hexagonal nut (approximate 50 kg) made up of cast iron including moulding, machining and Hexagonal nut threaded to suit screw rod provided with thrust bearings for smooth operation. The whole shutter assembly should be painted with two coats of anti-corrosive black paint over one coat of red oxide primer paint. Erecting Shutter including cr+D8ane hire charges (As per SR p .257) The rate is inclusive of all materials, labour charges including Lathing, Drilling, Welding, Gas cutting, Hydraulic bend removing of M.S. rod, hire charges of Crane and also inclusive of cost of covering plate, Foundation bolts, all bolt and nuts, conveyance to this site, Loading and unloading charges, Grease packing, Lubricating oil, Operating key, Locking arrangement and checking the Shutter operation etc., inculuding the cost of old retrivable materials complete as directed by the Departmental Officers. B6 |
| 3 | Cleaning the Aagayathamarai, and pasi from the channel for easy water flow and regulation and the etc., complete as directed by the departmental officers. Using Tractor with Dozer (M-0093) |
| 4 | GST 18% in Figures Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysOct 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender