Supply Of PROPULSION ELECTRICS FOR VANDE BHARAT TRAIN SETS
Tender Overview
Project Description
Supply Of propulsion electrics for vande bharat train sets , traction transformer as per clause. 4.3 of rdso specification no. rdso/pe/spec/emu/0196-2025(rev.1) with all l atest addendum corrigendum and annexures with required number of secondary traction windings along with protection equip ment, current transformers, potential transformers, safety support arrangement including crimping lugs, cable markers with h eat shrinkable sleeves for power and control cables, mating connectors, equipment mounting and earthing hardware and assoc iated auxiliary machines such as oil pump, oil cooling blowers etc. as per clause 4.27 of rdso spec. (one set per basic unit) n ote: quantity includes spares as per sor attached with tender. [ warranty period: 30 months after the date of deli very ] ] , igbt or sic based pwm traction converter set as per clause no. 4.5 of rdso specification no. rdso/pe/spec/em u/0196-2025 (rev.1) with all latest addendum corrigendum and annexures, including dc link with 100 hz resonance filter, bra ke chopper resistor, dc link earthing switch, pre-charging resistors and contactors and/or any other equipment necessary to re duce the effect of other harmonics on s&t equipment, crimping lugs, cable markers with heat shrinkable sleeves for power and control cables, mating connectors, equipment mounting, earthing hardware and accessories including associated auxiliary mac hines as per clause 4.27 of rdso spec . (one set for one motor coach). note: quantity includes spares as per sor atta ched with tender. [ warranty period: 30 months after the date of delivery ] ] , battery, battery box and battery charger including battery management system (as required) as per clause 4.28 of rdso specification no. rdso/pe/spec/emu/0196-2025 (rev.1) with all latest addendum corrigendum and annexures (one se t per basic unit). note: quantity includes 4 sets as spares. [ warranty period: 30 months after the date of delivery ] ] , 3-phase to single phase underslung transformer of adequate capacity (not less than 20 kva) for auxiliary loads o perating at 230 v ac and 110 v ac as per clause no. 4.1.1 (xxxx) of rdso specification no. rdso/pe/spec/emu/0196-2025 (re v.1) with all latest addendum corrigendum and annexures. note: the output voltage range and capacity of each output will be decided during detailed design stage. the drawing referred in the specification icf/elec/160 rev 0 or latest is for reference only . (one per coach). note: quantity includes spares as per sor attached with tender. [ warranty period: 30 months after the date of delivery ] ] , igbt/sic based auxiliary converter catering power supply to all auxiliaries as per clause no. 4.27 of rdso specifi cation no. rdso/pe/spec/emu/0196-2025 (rev.1) with all latest addendum corrigendum and annexures excluding auxiliary co mpressor as per clause no. 4.27.18 of rdso spec. the supply shall include fasteners, crimping lugs, cable markers with heat s hrinkable sleeves for power and control cables, mating connectors, equipment mounting and earthing hardware and associate d auxiliary machines (one set per basic unit).note: quantity includes spares as per sor attached with tender. [ war ranty period: 30 months after the date of delivery ] ] , roof mounted cab ac (minimum capacity 2.0 tr) rivet less design with control panel, mating connectors, water drain arrangement in the unit including mounting frame and anchoring arrangement to coach body and all accessories/hardware generally conforming to but not restricted to rdso specification no. rdso/2007/el/ spec/0055 (latest) ( one set per dtc). note: quantity includes spares as per sor attached with tender. [ warranty period: 30 months after the date of delivery ] ] , a 110 v dc battery operated auxiliary compressor set as per clause 4.27.18 of rdso specification no. rdso/pe/s pec/emu/0196-2025 (rev.1) with all latest addendum corrigendum and annexures, with capacity not less than 100 lpm / 1 hp. auxiliary compressor for pantograph shall be supplied as a module duly including - aux.compressor-1, safety valve -1, check v alve -2, pressure switch -1, air filter -1, 35 l reservoir -1, isolating cocks-2 and other associated equipment required for satisfa ctory functioning of auxiliary compressor. (one set per basic unit) note: quantity includes spares as per sor attached with tender. [ warranty period: 30 months after the date of delivery ] ] , lighting system (led based) including coach lights,(direct and indirect)along with local control switches at coac h level , cabin lights, and disaster management light, emergency alarm indication lights, 3-pin charging socket & switch along with usb type a and type c (fast charging), generally confirming to rdso/pe/spec/tl/0091 rev-2 or latest and usb socket co nfirming to rcf specification edts-411 with latest addendum/corrigendum, 3 pin socket confirming to is 1293 latest & switche s confirming to is 3854 latest including control switchgear (separate switch gear for direct light & indirect light including 50% c ontrols for each light circuit separately), terminal boards for branching of lights circuits, crimping lugs, cable markers with hea t shrinkable sleeves for power and control cables, mating connectors, equipment mounting and earthing hardware and accesso ries . (refer clause 4.29, of rdso specification no. rdso/pe/spec/emu/0196-2025 (rev.1) with all latest addendum corrigendu m and annexures (in coach sets) [ warranty period: 30 months after the date of delivery ] ] , installation of cable ducts, trays, conduits, pre-assembled harness duly crimping, dressing, bunching, termination of cable etc. (as mentioned in sor item no.28 & 29) in the coach for 02 prototype rakes as per clause 4.41.13 of rdso specific ation no. rdso/pe/spec/emu/0196-2025 (rev.1) with all latest addendum corrigendum and annexures. supply of one set of ins tallation jigs and fixture and its drawings, for each type of coach shall be part of scope of supply. (one set per rake). note: eve ry successful bidder to carry out the above activity for 2 prototype rakes. [ warranty period: 30 months after the date of deli very ] ] , cable transit system with epdm type cable gland rubber modules to 4.1.1 (xxxiii) & 4.41.8 of rdso specification no. rdso/pe/spec/emu/0196-2025 (rev.1) with all latest addendum corrigendum and annexures for sealing & shielding includi ng mounting hardware and fixing brackets generally conforming to but not restricted to rdso specification no. rdso/2008/el/ spec/0067(latest). suitable emc methodology to be adopted (one set per middle basic unit) [ warranty period: 30 months af ter the date of delivery ] ] , inter-vehicular couplers (power and control) with coach jumper cable assembly assembled on ss plate including crimping lugs, cable markers with heat shrinkable sleeves, mating connectors, equipment mounting and earthing ss hardware and other associated accessories excluding train line cables as per clause no. 4.41 of rdso specification no. rdso/pe/spec/emu/0196-2025 (rev.1) with all latest addendum corrigendum and annexures (one set per end basic unit). [ w arranty period: 30 months after the date of delivery ] ] , cable transit system with epdm type cable gland rubber modules to 4.1.1 (xxxiii) & 4.41.8 of rdso specification no. rdso/pe/spec/emu/0196-2025 (rev.1) with all latest addendum corrigendum and annexures for sealing & shielding includi ng mounting hardware and fixing brackets generally conforming to but not restricted to rdso specification no. rdso/2008/el/ spec/0067(latest). suitable emc methodology to be adopted (one set per end basic unit) [ warranty period: 30 months after the date of delivery ] ] , inter-vehicular couplers (power and control) with coach jumper cable assembly assembled on ss plate including crimping lugs, cable markers with heat shrinkable sleeves, mating connectors, equipment mounting and earthing ss hardware and other associated accessories excluding train line cables as per clause no. 4.41 of rdso specification no. rdso/pe/spec/emu/0196-2025 (rev.1) with all latest addendum corrigendum and annexures (one set per middle basic unit). n ote: quantity includes spares as per sor attached with tender. [ warranty period: 30 months after the date of deli very ] ] , power, control, train line , data / communication cables, fire survival cables in pre-harnessed form (as per claus e 4.41.13) including crimping lugs/sockets/wire end ferrules, suitable connectors, cable markers with heat shrinkable sleeves a nd other accessories like flexible conduits, cable jacket,end fittings ,straight connectors etc. as per clause no. 4.41 and other r elevant clauses of rdso specification no. rdso/pe/spec/emu/0196-2025 (rev.1) with all latest addendum corrigendum and an nexures (the scope of supply does not include iv couplers under clause 4.41.14 (v) of rdso specification) (one set per middle basic unit). [ warranty period: 30 months after the date of delivery ] ] , power, control, train line , data / communication cables, fire survival cables in pre-harnessed form (as per claus e 4.41.13) including crimping lugs/sockets/wire end ferrules , suitable connectors, cable markers with heat shrinkable sleeves and other accessories like flexible conduits ,cable jacket, end fittings ,straight connectors etc. as per clause no. 4.41 and other relevant clauses of rdso specification no. rdso/pe/spec/emu/0196-2025 (rev.1) with all latest addendum corrigendum and a nnexures (the scope of supply does not include iv couplers under clause 4.41.14 (v) of rdso specification) (one set per end b asic unit). [ warranty period: 30 months after the date of delivery ] ] , lighting system (led based) including coach lights, (direct and indirect) along with local control switches at coach level, cabin lights, headlight, tail light, marker lights, flasher lights, signal exchange light (along with pfc (potential free contact) to enable led based signal exchange light working status), disaster management light, emergency alarm indication li ghts, generally confirming to rdso/pe/spec/tl/0091 rev-2 or latest including control switchgear (separate switch gear for dire ct light & indirect light including 50% controls for each light circuit separately), terminal boards for branching of lights circuits, crimping lugs, cable markers with heat shrinkable sleeves for power and control cables, mating connectors, equipment mounti ng and earthing hardware and accessories. (refer clause 4.29, 4.30, 4.31, 4.32, 4.33 of rdso specification no. rdso/pe/spec/ emu/0196-2025 (rev.1) with all latest addendum corrigendum and annexures (one set per dtc) [ warranty period: 30 mont hs after the date of delivery ] ] , design and supply of electrical underframe cable ducts/trays/conduits up to various equipment of the train (not l imited to sor items) with mounting & earthing hardware and associated accessories etc for all the rakes as per clause no 4.41. 13 of rdso specification no. rdso/pe/spec/ emu/0196-2025 (rev.1) with all latest addendum corrigendum and annexures (on e set per basic unit) [ warranty period: 30 months after the date of delivery ] ] , three-phase fully suspended asynchronous induction motors or permanent magnet synchronous motor (encapsul ated design of traction motor will also be acceptable) as per clause no. 4.6 of rdso specification no. rdso/pe/spec/emu/0196- 2025(rev.1) with all latest addendum corrigendum and annexure compatible with igbt/sic based traction converter power sup ply, with coupling, gear box assembly with all the required fasteners, reaction arm and metal bonded rubber items, required se nsors and associated equipment including crimping lugs, cable markers with heat shrinkable sleeves for power and control cab les, mating connectors, along with all the required hardware, metal bonded rubber items required for fixing traction motor with the bogie frame, equipment mounting and earthing hardware and accessories. (one set consists of 4 traction motor assembly) note: quantity includes spares as per sor attached with tender. [ warranty period: 30 months after the date of d elivery ] ] , speed indicating cum recording equipment as per clause 4.19 of rdso specification no. rdso/pe/spec/emu/019 6-2025 (rev.1) with all latest addendum corrigendum and annexures. (one set per dtc) [ warranty period: 30 months after the date of delivery ] ] , set of two vcbs and two earthing switches for traction circuit protection and ht cable protection as per clause n o. 4.26.1 and 4.1.1(xxxv) of rdso specification no. rdso/pe/spec/emu/0196-2025 (rev.1) with all latest addendum corrigendu m and annexures (one set per basic unit). note: quantity includes spares as per sor attached with tender. [ warra nty period: 30 months after the date of delivery ] ] , microprocessor based train control and management system (tcms) as per clause no.4.8 of rdso specification no. rdso/pe/spec/emu/0196-2025 (rev.1) with all latest addendum corrigendum and annexures), with brake interface unit inc luding fault diagnosis and display system in the driving cab and multiplexing system for relevant control & other signals, remot e diagnostics and tracking system, wheel slip/slide protection & anti-skid controls (as per clause no. 4.24) including integration of automatic door closure system, brake system and fire detection system. (one set per middle basic unit) [ warranty perio d: 30 months after the date of delivery ] ] , microprocessor based train control and management system (tcms) as per clause no.4.8 of rdso specification no. rdso/pe/spec/emu/0196-2025 (rev.1) with all latest addendum corrigendum and annexures), with brake interface unit inc luding fault diagnosis and display system in the driving cab and multiplexing system for relevant control & other signals, remot e diagnostics and tracking system, wheel slip/slide protection & anti-skid controls (as per clause no. 4.24) including integration of automatic door closure system, brake system and fire detection system. (one set per end basic unit) [ warranty period: 30 months after the date of delivery ] ] , set of equipment, switch gears for toilet operation in emergency mode in assembled form including pre-wired p ump control panel assembly, 750 va inverter and its set of contactors as per specification icf/elec/175(latest). (vtc compres sor and vtc pressure switch is not in scope of supply) (one set per coach) [ warranty period: 30 months after the date of del ivery ] ] , event recorder as per clause 4.9 including cab recording equipment as per clause 4.13 of rdso specification no . rdso/pe/spec/ emu/0196-2025 (rev.1) with all latest addendum corrigendum and annexures (one set per rake). [ warrant y period: 30 months after the date of delivery ] ] , ccms (centralized coach monitoring system) as per clause 4.43 of rdso specification no. rdso/pe/spec/emu/0 196-2025 (rev.1) with all latest addendum corrigendum and annexures. (one set per dtc) [ warranty period: 30 months aft er the date of delivery ] ] , pantograph with mounting insulators, pneumatic control panel, panto isolating cocks including interconnecting b us bars and associated stainless steel mounting hardware, mating connectors - single pantograph suitable for 25kv ac supply as per clause 4.42 of rdso specification no. rdso/pe/spec/emu/0196-2025 (rev.1) with all latest addendum corrigendum and annexures (pantograph set) note: quantity includes spares as per sor attached with tender. [ warranty period: 3 0 months after the date of delivery ] ] , complete air-conditioning system (passenger coaches) as per clause 4.38 of rdso specification no. rdso/pe/sp ec/emu/0196-2025 (rev.1) with all latest addendum corrigendum and annexures with necessary equipment such as 2 nos. roof mounted package unit (rmpu), micro-controller, bellows, gaskets and suitable drain arrangement including crimping lugs, cable markers with heat shrinkable sleeves for power and control cables, mating connectors, equipment mounting and earthin g hardware and accessories. (one set per coach) note: quantity includes spares as per sor attached with tender. [ warranty period: 30 months after the date of delivery ] ] , design, development, manufacture, supply, integration, testing and commissioning of igbt/sic based 3-phase pr opulsion, control and other equipment for chair car version train sets suitable for operation on 25kv ac ohe system conforming to rdso specification no. rdso/pe/spec/emu/0196-2025 (rev.1) along with all latest addendum corrigendum and applicable an nexures (excluding annexure-xii of rdso specification no. rdso/pe/spec/emu/0196-2025 (rev. 1) wherever applicable as per sor) but without design and supply of bogie. the firm to provide necessary instrumentation and special tools as per clause no. 1.8.11 of rdso spec required for commissioning and field-testing of the equipment. scope of supply also includes training of ir personnel as per clause xxxx of scc of the bid documents at suppliers premises and at icf and other railway works for propul sion system. camc as per annexure - 8 for items mentioned at grp-1, pl.no. 3176n002 of item details of tender document. bi dders should factor in the quoted prices of the items of any other equipment on returnable basis, which the bidder feels necess ary or shall be required during manufacturing, installation, testing/trails of the trainsets but not included in item details of tend er document from grp-1 s.no.1 to 57. note: 1. the bidders are advised to quote only rs.1/- against this item for accountal purp ose. 2. additional information to tender description is at s.no.12 of special conditions of tender document. [ warranty period: 30 months after the date of delivery ] ] , design and supply of electrical roof cable ducts/trays/flexible conduits up to various equipment of the train (not limited to sor items) with mounting & earthing hardware and associated accessories etc for all the rakes as per clause no.4.4 1.13 of rdso specification no. rdso/pe/spec/ emu/0196-2025 (rev.1) with all latest addendum corrigendum and annexures (o ne set per dtc). [ warranty period: 30 months after the date of delivery ] ] , design and supply of electrical roof cable ducts/trays/flexible conduits up to various equipment of the train (not limited to sor items) with mounting & earthing hardware and associated accessories etc for all the rakes as per clause no. 4.4 1.13 of rdso specification no. rdso/pe/spec/ emu/0196-2025 (rev.1) with all latest addendum corrigendum and annexures (o ne set per mc). [ warranty period: 30 months after the date of delivery ] ] , design and supply of electrical roof cable ducts/trays/flexible conduits up to various equipment of the train (not limited to sor items) with mounting & earthing hardware and associated accessories etc for all the rakes as per clause no. 4.4 1.13 of rdso specification no. rdso/pe/spec/ emu/0196-2025 (rev.1) with all latest addendum corrigendum and annexures (o ne set per tc). [ warranty period: 30 months after the date of delivery ] ] , design and supply of electrical roof cable ducts/trays/flexible conduits up to various equipment of the train (not limited to sor items) with mounting & earthing hardware and associated accessories etc for all the rakes as per clause no.4.4 1.13 of rdso specification no. rdso/pe/spec/ emu/0196-2025 (rev.1) with all latest addendum corrigendum and annexures. ( one set per ndtc). [ warranty period: 30 months after the date of delivery ] ] , lighting system (led based) including coach lights, (direct and indirect) along with local control switches at coach level , cabin lights, and disaster management light, emergency alarm indication lights, generally confirming to rdso/pe /spec/tl/0091 rev-2 or latest including control switchgear (separate switch gear for direct light & indirect light including 50% controls for each light circuit separately), terminal boards for branching of lights circuits, crimping lugs, cable markers with he at shrinkable sleeves for power and control cables, mating connectors, equipment mounting and earthing hardware and access ories . (refer clause 4.29, of rdso specification no. rdso/pe/spec/emu/0196-2025 (rev.1) with all latest addendum corrigend um and annexures (one set per mc coach) [ warranty period: 30 months after the date of delivery ] ] , lighting system (led based) including coach lights, (direct and indirect) along with local control switches at coach level , cabin lights, and disaster management light, emergency alarm indication lights, generally confirming to rdso/pe /spec/tl/0091 rev-2 or latest including control switchgear (separate switch gear for direct light & indirect light including 50% controls for each light circuit separately), terminal boards for branching of lights circuits, crimping lugs, cable markers with he at shrinkable sleeves for power and control cables, mating connectors, equipment mounting and earthing hardware and access ories . (refer clause 4.29, of rdso specification no. rdso/pe/spec/emu/0196-2025 (rev.1) with all latest addendum corrigend um and annexures (one set per tc coach) [ warranty period: 30 months after the date of delivery ] ] , lighting system (led based) including coach lights, (direct and indirect) along with local control switches at coach level , cabin lights, and disaster management light, emergency alarm indication lights, generally confirming to rdso/pe /spec/tl/0091 rev-2 or latest including control switchgear (separate switch gear for direct light & indirect light including 50% controls for each light circuit separately), terminal boards for branching of lights circuits, crimping lugs, cable markers with he at shrinkable sleeves for power and control cables, mating connectors, equipment mounting and earthing hardware and access ories . (refer clause 4.29, of rdso specification no. rdso/pe/spec/emu/0196-2025 (rev.1) with all latest addendum corrigend um and annexures (one set per ndtc coach) [ warranty period: 30 months after the date of delivery ] ] , automatic smoke, fire detection with alarm system in each coach as per clause 2.9.2 of rdso specification no. r dso/pe/spec/emu/0196-2025 (rev.1) with all latest addendum corrigendum and annexures. (one set per coach) [ warranty period: 30 months after the date of delivery ] ] , exterior lighting system (led based) viz.,, headlight, tail light, marker lights, flasher lights , signal exchange lig ht etc., as per clause 4.30, 4.31, 4.32, 4.33 of rdso specification no. rdso/pe/spec/emu/0196-2025 (rev.1) with all latest add endum corrigendum and annexures (in coach sets) [ warranty period: 30 months after the date of delivery ] ] , supervision of installation as per clause 18.3 & commissioning as per item no.18.4 of scc of the bid documents for 20 car rakes. (one set equal to one 20 car rake). [ warranty period: 30 months after the date of delivery ] ] , set of metal oxide gapless lightning arrestors (02 nos.) for 25 kv ac as per clause no. 4.4 of rdso specification no. rdso/pe/spec/emu/0196-2025(rev.1) with all latest addendum corrigendum and annexures (one set per basic unit). note : quantity includes spares as per sor attached with tender. [ warranty period: 30 months after the date of deliver y ] ] , lifting frames and special jigs & fixtures for mounting & dismounting of main converter and auxiliary converter [ warranty period: 30 months after the date of delivery ] ] , complete pre-fabricated driver desk housing all the necessary equipment and driver/ guard seat, master cum br ake controller , including crimping lugs, cable markers with heat shrinkable sleeves for power and control cables, mating conn ectors, equipment mounting and earthing hardware and accessories as per clause 4.15 & 4.16 of rdso specification no. rdso/ pe/spec/emu/0196-2025 (rev.1) with all latest addendum corrigendum and annexures note: 1.provision of interface (hardware and software) for kavach (tcas), brake equipment and rtis display shall be in the scope of supply. pneumatic horns, rolling b lind and sun visors are excluded. items separately mentioned in sor are also excluded from scope of driver desk. 2.based on the approved layout, a mockup of the complete driver cab shall be made at purchaser premises/ nominated place to finalize th e finer details and freeze the design as per clause 4.16.1(xii). (one set per dtc). [ warranty period: 30 months after the date of delivery ] ] , electrically operated wiper system with washer tank as per clause no. 4.16.1(iii) of rdso specification no. rdso/ pe/ spec/emu/0196-2025 (rev.1) with all latest addendum corrigendum and annexures.(one set per dtc) note: quantity in cludes spares as per sor attached with tender. [ warranty period: 30 months after the date of delivery ] ] , transformer mounting/dismounting kit (numbers) [ warranty period: 30 months after the date of delivery ] ] , high reach pantograph as per clause 4.42.1 of rdso specification no. rdso/pe/spec/emu/0196-2025 (rev.1) wit h all latest addendum corrigendum and annexures with mounting insulators, pneumatic control panel, panto isolating cocks inc luding interconnecting bus bars and associated stainless steel mounting hardware, mating connectors - single pantograph suit able for 25kv ac supply. (hr pantograph set) note: quantity includes spares as per sor attached with tender. [ wa rranty period: 30 months after the date of delivery ] ] , set of control equipment such as relays, contactors, circuit breakers and related switchgears etc. for propulsion system, controls and all auxiliaries including rmpu switch gears/panels in the assembled form viz. cubicle or cabinet as per cla use 4.21 of rdso specification no. rdso/pe/spec/emu/0196-2025 (rev.1) with all latest addendum corrigendum and annexure s. the scope also includes electrical switch gears for mini -pantry equipment in each coach. (one set per end basic unit) [ war ranty period: 30 months after the date of delivery ] ] , voice communication system passenger information system, wi-fi based infotainment system including their int egration, coach displays (both internal and external), front destination board (head code in dtcs), audio communication syste m, emergency talk back system and interface with the train monitoring system (tms), passenger alarm system with flush mou nted alarm push button with reset key mechanism with poly carbonate enclosure with separate led indications beside respecti ve push button area, external flush mounted, led based passenger alarm indicator on each side of the coach and any other eq uipment required for interfacing pis with the receiver equipment of tms as per clause 4.10, 4.11, and 4.20 of rdso specificati on no. rdso/pe/spec/emu/0196-2025 (rev.1) with all latest addendum corrigendum and annexures. (one set per end basic un it) note: quantity includes spares as per sor attached with tender. [ warranty period: 30 months after the date of delivery ] ] , all special tools, fixtures, gauges etc., for assembly /disassembly with bogie/axle of drive complete (including ge arbox, pinion, gear wheel and components of gear box) and traction motor. this includes special tools, fixtures, gauges for thei r overhauling/repairing also. (set) [ warranty period: 30 months after the date of delivery ] ] , diagnostic kit consisting of a laptop loaded with requisite life time licensed software and interface hardware for t esting & trouble shooting of propulsion system including power module of main and auxiliary converter-inverter, traction motor etc (set) [ warranty period: 30 months after the date of delivery ] ] , passenger car surveillance system as per clause 4.12 of rdso specification no. rdso/pe/spec/emu/0196-2025 ( rev.1) with all latest addendum corrigendum and annexures. (one set per middle basic unit) note: quantity includes spar es as per sor attached with tender. [ warranty period: 30 months after the date of delivery ] ] , passenger car surveillance system as per clause 4.12 of rdso specification no. rdso/pe/spec/emu/0196-2025 ( rev.1) with all latest addendum corrigendum and annexures. (one set per end basic unit) note: quantity includes spares as per sor attached with tender. [ warranty period: 30 months after the date of delivery ] ] , high voltage cable running on the roof for feeding adjacent units as per clause no. 4.26.3 (excluding vcb and ea rthing switch) and transformer ht cable with protection shield (as per clause 4.26.2) including isolation & protection system (e lectrical and mechanical), high voltage insulator, inter car jumper cable assembly along with crimping lugs, all mounting &eart hing hardware, mounting brackets and exterior cable protection system throughout the above roof area of rdso specification no. rdso/pe/spec/emu/ 0196-2025 (rev.1) with all latest addendum corrigendum and annexures. (one set per middle basic u nit).note: quantity includes spares as per sor attached with tender. [ warranty period: 30 months after the date of delivery ] ] , high voltage cable running on the roof for feeding adjacent units as per clause no. 4.26.3 (excluding vcb and ea rthing switch) and transformer ht cable with protection shield as per clause 4.26.2 including isolation & protection system (ele ctrical and mechanical) including high voltage insulator, inter car jumper cable assembly along with crimping lugs, all mountin g & earthing hardware, mounting brackets and exterior cable protection system throughout the above roof area of rdso speci fication no. rdso/pe/spec/emu/ 0196-2025 (rev.1) with all latest addendum corrigendum and annexures (one set per end bas ic unit). [ warranty period: 30 months after the date of delivery ] ] , set of control equipment such as relays, contactors, circuit breakers and related switchgears etc. for propulsion system, controls and all auxiliaries including rmpu switch gears/panels in the assembled form viz. cubicle or cabinet as per cla use 4.21 of rdso specification no. rdso/pe/spec/emu/0196-2025 (rev.1) with all latest addendum corrigendum and annexure s. the scope also includes electrical switch gears for mini -pantry equipment in each coach. (one set per middle basic unit) [ w arranty period: 30 months after the date of delivery ] ] , voice communication system passenger information system, wi-fi based infotainment system including their int egration, coach displays (both internal and external), audio communication system, emergency talk back system and interface with the train monitoring system (tms), passenger alarm system with flush mounted alarm push button with reset key mecha nism with poly carbonate enclosure with separate led indications beside respective push button area, external flush mounted, led based passenger alarm indicator on each side of the coach and any other equipment required for interfacing pis with the r eceiver equipment of tms as per clause 4.10, 4.11, and 4.20 of rdso specification no. rdso/pe/spec/emu/0196-2025 (rev.1) with all latest addendum corrigendum and annexures. (one set per middle basic unit) note: quantity includes spares as p er sor attached with tender. [ warranty period: 30 months after the date of delivery ] ] , load weighing system including redundant weight sensors at bogie level, junction boxes for interfacing cables, m ating connectors, ss hardware, cable markers and crimp contacts. the scope of supply of pressure transducers shall be with s upplier as per clause 4.25 of rdso specification no. rdso/pe/spec/emu/0196-2025 (rev.1) with all latest addendum corrigend um and annexures. (one set per coach). [ warranty period: 30 months after the date of delivery ] ] , supply and commissioning of set of tools as per details at.annexure t consisting of a. control terminal crimping tools - (2 items), b. communication and control terminal crimping tools - (5 items), c. power tubular crimping tools - (2 items ), d. supporting tools - (3 items), e. lifting platforms tools - (5 items) f. mechanical installation supporting tools - (4 items) (on e set to be supplied by each supplier.) [ warranty period: 30 months after the date of delivery ] ] , camc for train set items covered under pl.nos.31763224, 31918578, 31761100, 31711777, 31721278, 3172128 0, 31903629, 31721308, 31720791, 31711856, 31711728, 31711741, 31713257, 31711832, 31711765, 31761094, 31904397, 31720833, 31721266, 31721254, 31918463, 31918554, 31918529, 31918505, 31918475, 31918566 and 31712113 for 05 yea rs after completion of warranty period of two years (rate to be quoted year wise) as per the details mentioned in annexure-8 of nit bid document excluding spare quantity of respective item. (one set per rake) [ warranty period: 2 years, amc perio d: 5 years, rate of discounting: 10 % ] ] , traction transformer as per clause. 4.3 of rdso specification no. rdso/pe/spec/emu/0196-2025(rev.1) with all l atest addendum corrigendum and annexures with required number of secondary traction windings along with protection equip ment, current transformers, potential transformers, safety support arrangement including crimping lugs, cable markers with h eat shrinkable sleeves for power and control cables, mating connectors, equipment mounting and earthing hardware and assoc iated auxiliary machines such as oil pump, oil cooling blowers etc. as per clause 4.27 of rdso spec. (one set per basic unit) n ote: quantity includes spares as per sor attached with tender. [ warranty period: 30 months after the date of deli very ] ] , igbt or sic based pwm traction converter set as per clause no. 4.5 of rdso specification no. rdso/pe/spec/em u/0196-2025 (rev.1) with all latest addendum corrigendum and annexures, including dc link with 100 hz resonance filter, bra ke chopper resistor, dc link earthing switch, pre-charging resistors and contactors and/or any other equipment necessary to re duce the effect of other harmonics on s&t equipment, crimping lugs, cable markers with heat shrinkable sleeves for power and control cables, mating connectors, equipment mounting, earthing hardware and accessories including associated auxiliary mac hines as per clause 4.27 of rdso spec . (one set for one motor coach). note: quantity includes spares as per sor atta ched with tender. [ warranty period: 30 months after the date of delivery ] ] , battery, battery box and battery charger including battery management system (as required) as per clause 4.28 of rdso specification no. rdso/pe/spec/emu/0196-2025 (rev.1) with all latest addendum corrigendum and annexures (one se t per basic unit). note: quantity includes 4 sets as spares. [ warranty period: 30 months after the date of delivery ] ] , 3-phase to single phase underslung transformer of adequate capacity (not less than 20 kva) for auxiliary loads o perating at 230 v ac and 110 v ac as per clause no. 4.1.1 (xxxx) of rdso specification no. rdso/pe/spec/emu/0196-2025 (re v.1) with all latest addendum corrigendum and annexures. note: the output voltage range and capacity of each output will be decided during detailed design stage. the drawing referred in the specification icf/elec/160 rev 0 or latest is for reference only . (one per coach). note: quantity includes spares as per sor attached with tender. [ warranty period: 30 months after the date of delivery ] ] , igbt/sic based auxiliary converter catering power supply to all auxiliaries as per clause no. 4.27 of rdso specifi cation no. rdso/pe/spec/emu/0196-2025 (rev.1) with all latest addendum corrigendum and annexures excluding auxiliary co mpressor as per clause no. 4.27.18 of rdso spec. the supply shall include fasteners, crimping lugs, cable markers with heat s hrinkable sleeves for power and control cables, mating connectors, equipment mounting and earthing hardware and associate d auxiliary machines (one set per basic unit).note: quantity includes spares as per sor attached with tender. [ war ranty period: 30 months after the date of delivery ] ] , roof mounted cab ac (minimum capacity 2.0 tr) rivet less design with control panel, mating connectors, water drain arrangement in the unit including mounting frame and anchoring arrangement to coach body and all accessories/hardware generally conforming to but not restricted to rdso specification no. rdso/2007/el/ spec/0055 (latest) ( one set per dtc). note: quantity includes spares as per sor attached with tender. [ warranty period: 30 months after the date of delivery ] ] , a 110 v dc battery operated auxiliary compressor set as per clause 4.27.18 of rdso specification no. rdso/pe/s pec/emu/0196-2025 (rev.1) with all latest addendum corrigendum and annexures, with capacity not less than 100 lpm / 1 hp. auxiliary compressor for pantograph shall be supplied as a module duly including - aux.compressor-1, safety valve -1, check v alve -2, pressure switch -1, air filter -1, 35 l reservoir -1, isolating cocks-2 and other associated equipment required for satisfa ctory functioning of auxiliary compressor. (one set per basic unit) note: quantity includes spares as per sor attached with tender. [ warranty period: 30 months after the date of delivery ] ] , lighting system (led based) including coach lights,(direct and indirect)along with local control switches at coac h level , cabin lights, and disaster management light, emergency alarm indication lights, 3-pin charging socket & switch along with usb type a and type c (fast charging), generally confirming to rdso/pe/spec/tl/0091 rev-2 or latest and usb socket co nfirming to rcf specification edts-411 with latest addendum/corrigendum, 3 pin socket confirming to is 1293 latest & switche s confirming to is 3854 latest including control switchgear (separate switch gear for direct light & indirect light including 50% c ontrols for each light circuit separately), terminal boards for branching of lights circuits, crimping lugs, cable markers with hea t shrinkable sleeves for power and control cables, mating connectors, equipment mounting and earthing hardware and accesso ries . (refer clause 4.29, of rdso specification no. rdso/pe/spec/emu/0196-2025 (rev.1) with all latest addendum corrigendu m and annexures (in coach sets) [ warranty period: 30 months after the date of delivery ] ] , installation of cable ducts, trays, conduits, pre-assembled harness duly crimping, dressing, bunching, termination of cable etc. (as mentioned in sor item no.28 & 29) in the coach for 02 prototype rakes as per clause 4.41.13 of rdso specific ation no. rdso/pe/spec/emu/0196-2025 (rev.1) with all latest addendum corrigendum and annexures. supply of one set of ins tallation jigs and fixture and its drawings, for each type of coach shall be part of scope of supply. (one set per rake). note: eve ry successful bidder to carry out the above activity for 2 prototype rakes. [ warranty period: 30 months after the date of deli very ] ] , cable transit system with epdm type cable gland rubber modules to 4.1.1 (xxxiii) & 4.41.8 of rdso specification no. rdso/pe/spec/emu/0196-2025 (rev.1) with all latest addendum corrigendum and annexures for sealing & shielding includi ng mounting hardware and fixing brackets generally conforming to but not restricted to rdso specification no. rdso/2008/el/ spec/0067(latest). suitable emc methodology to be adopted (one set per middle basic unit) [ warranty period: 30 months af ter the date of delivery ] ] , inter-vehicular couplers (power and control) with coach jumper cable assembly assembled on ss plate including crimping lugs, cable markers with heat shrinkable sleeves, mating connectors, equipment mounting and earthing ss hardware and other associated accessories excluding train line cables as per clause no. 4.41 of rdso specification no. rdso/pe/spec/emu/0196-2025 (rev.1) with all latest addendum corrigendum and annexures (one set per end basic unit). [ w arranty period: 30 months after the date of delivery ] ] , cable transit system with epdm type cable gland rubber modules to 4.1.1 (xxxiii) & 4.41.8 of rdso specification no. rdso/pe/spec/emu/0196-2025 (rev.1) with all latest addendum corrigendum and annexures for sealing & shielding includi ng mounting hardware and fixing brackets generally conforming to but not restricted to rdso specification no. rdso/2008/el/ spec/0067(latest). suitable emc methodology to be adopted (one set per end basic unit) [ warranty period: 30 months after the date of delivery ] ] , inter-vehicular couplers (power and control) with coach jumper cable assembly assembled on ss plate including crimping lugs, cable markers with heat shrinkable sleeves, mating connectors, equipment mounting and earthing ss hardware and other associated accessories excluding train line cables as per clause no. 4.41 of rdso specification no. rdso/pe/spec/emu/0196-2025 (rev.1) with all latest addendum corrigendum and annexures (one set per middle basic unit). n ote: quantity includes spares as per sor attached with tender. [ warranty period: 30 months after the date of deli very ] ] , power, control, train line , data / communication cables, fire survival cables in pre-harnessed form (as per claus e 4.41.13) including crimping lugs/sockets/wire end ferrules, suitable connectors, cable markers with heat shrinkable sleeves a nd other accessories like flexible conduits, cable jacket,end fittings ,straight connectors etc. as per clause no. 4.41 and other r elevant clauses of rdso specification no. rdso/pe/spec/emu/0196-2025 (rev.1) with all latest addendum corrigendum and an nexures (the scope of supply does not include iv couplers under clause 4.41.14 (v) of rdso specification) (one set per middle basic unit). [ warranty period: 30 months after the date of delivery ] ] , power, control, train line , data / communication cables, fire survival cables in pre-harnessed form (as per claus e 4.41.13) including crimping lugs/sockets/wire end ferrules , suitable connectors, cable markers with heat shrinkable sleeves and other accessories like flexible conduits ,cable jacket, end fittings ,straight connectors etc. as per clause no. 4.41 and other relevant clauses of rdso specification no. rdso/pe/spec/emu/0196-2025 (rev.1) with all latest addendum corrigendum and a nnexures (the scope of supply does not include iv couplers under clause 4.41.14 (v) of rdso specification) (one set per end b asic unit). [ warranty period: 30 months after the date of delivery ] ] , lighting system (led based) including coach lights, (direct and indirect) along with local control switches at coach level, cabin lights, headlight, tail light, marker lights, flasher lights, signal exchange light (along with pfc (potential free contact) to enable led based signal exchange light working status), disaster management light, emergency alarm indication li ghts, generally confirming to rdso/pe/spec/tl/0091 rev-2 or latest including control switchgear (separate switch gear for dire ct light & indirect light including 50% controls for each light circuit separately), terminal boards for branching of lights circuits, crimping lugs, cable markers with heat shrinkable sleeves for power and control cables, mating connectors, equipment mounti ng and earthing hardware and accessories. (refer clause 4.29, 4.30, 4.31, 4.32, 4.33 of rdso specification no. rdso/pe/spec/ emu/0196-2025 (rev.1) with all latest addendum corrigendum and annexures (one set per dtc) [ warranty period: 30 mont hs after the date of delivery ] ] , design and supply of electrical underframe cable ducts/trays/conduits up to various equipment of the train (not l imited to sor items) with mounting & earthing hardware and associated accessories etc for all the rakes as per clause no 4.41. 13 of rdso specification no. rdso/pe/spec/ emu/0196-2025 (rev.1) with all latest addendum corrigendum and annexures (on e set per basic unit) [ warranty period: 30 months after the date of delivery ] ] , three-phase fully suspended asynchronous induction motors or permanent magnet synchronous motor (encapsul ated design of traction motor will also be acceptable) as per clause no. 4.6 of rdso specification no. rdso/pe/spec/emu/0196- 2025(rev.1) with all latest addendum corrigendum and annexure compatible with igbt/sic based traction converter power sup ply, with coupling, gear box assembly with all the required fasteners, reaction arm and metal bonded rubber items, required se nsors and associated equipment including crimping lugs, cable markers with heat shrinkable sleeves for power and control cab les, mating connectors, along with all the required hardware, metal bonded rubber items required for fixing traction motor with the bogie frame, equipment mounting and earthing hardware and accessories. (one set consists of 4 traction motor assembly) note: quantity includes spares as per sor attached with tender. [ warranty period: 30 months after the date of d elivery ] ] , speed indicating cum recording equipment as per clause 4.19 of rdso specification no. rdso/pe/spec/emu/019 6-2025 (rev.1) with all latest addendum corrigendum and annexures. (one set per dtc) [ warranty period: 30 months after the date of delivery ] ] , set of two vcbs and two earthing switches for traction circuit protection and ht cable protection as per clause n o. 4.26.1 and 4.1.1(xxxv) of rdso specification no. rdso/pe/spec/emu/0196-2025 (rev.1) with all latest addendum corrigendu m and annexures (one set per basic unit). note: quantity includes spares as per sor attached with tender. [ warra nty period: 30 months after the date of delivery ] ] , microprocessor based train control and management system (tcms) as per clause no.4.8 of rdso specification no. rdso/pe/spec/emu/0196-2025 (rev.1) with all latest addendum corrigendum and annexures), with brake interface unit inc luding fault diagnosis and display system in the driving cab and multiplexing system for relevant control & other signals, remot e diagnostics and tracking system, wheel slip/slide protection & anti-skid controls (as per clause no. 4.24) including integration of automatic door closure system, brake system and fire detection system. (one set per middle basic unit) [ warranty perio d: 30 months after the date of delivery ] ] , microprocessor based train control and management system (tcms) as per clause no.4.8 of rdso specification no. rdso/pe/spec/emu/0196-2025 (rev.1) with all latest addendum corrigendum and annexures), with brake interface unit inc luding fault diagnosis and display system in the driving cab and multiplexing system for relevant control & other signals, remot e diagnostics and tracking system, wheel slip/slide protection & anti-skid controls (as per clause no. 4.24) including integration of automatic door closure system, brake system and fire detection system. (one set per end basic unit) [ warranty period: 30 months after the date of delivery ] ] , set of equipment, switch gears for toilet operation in emergency mode in assembled form including pre-wired p ump control panel assembly, 750 va inverter and its set of contactors as per specification icf/elec/175(latest). (vtc compres sor and vtc pressure switch is not in scope of supply) (one set per coach) [ warranty period: 30 months after the date of del ivery ] ] , event recorder as per clause 4.9 including cab recording equipment as per clause 4.13 of rdso specification no . rdso/pe/spec/ emu/0196-2025 (rev.1) with all latest addendum corrigendum and annexures (one set per rake). [ warrant y period: 30 months after the date of delivery ] ] , ccms (centralized coach monitoring system) as per clause 4.43 of rdso specification no. rdso/pe/spec/emu/0 196-2025 (rev.1) with all latest addendum corrigendum and annexures. (one set per dtc) [ warranty period: 30 months aft er the date of delivery ] ] , design, development, manufacture, supply, integration, testing and commissioning of igbt/sic based 3-phase pr opulsion, control and other equipment for chair car version train sets suitable for operation on 25kv ac ohe system conforming to rdso specification no. rdso/pe/spec/emu/0196-2025 (rev.1) along with all latest addendum corrigendum and applicable an nexures (excluding annexure-xii of rdso specification no. rdso/pe/spec/emu/0196-2025 (rev. 1) wherever applicable as per sor) but without design and supply of bogie. the firm to provide necessary instrumentation and special tools as per clause no. 1.8.11 of rdso spec required for commissioning and field-testing of the equipment. scope of supply also includes training of ir personnel as per clause xxxx of scc of the bid documents at suppliers premises and at icf and other railway works for propul sion system. camc as per annexure -8 for items mentioned at grp-2, pl no. 3176n004 of item details of tender document. bid ders should factor in the quoted prices of the items of any other equipment on returnable basis, which the bidder feels necessa ry or shall be required during manufacturing, installation, testing/trails of the trainsets but not included in item details of tender document from grp-2 s.no.1 to 56. note: 1. the bidders are advised to quote only rs.1/- against this item for accountal purpos e. 2. additional information to tender description is at s.no.13 of special conditions of tender document. [ warranty period: 3 0 months after the date of delivery ] ] , pantograph with mounting insulators, pneumatic control panel, panto isolating cocks including interconnecting b us bars and associated stainless steel mounting hardware, mating connectors - single pantograph suitable for 25kv ac supply as per clause 4.42 of rdso specification no. rdso/pe/spec/emu/0196-2025 (rev.1) with all latest addendum corrigendum and annexures (pantograph set) note: quantity includes spares as per sor attached with tender. [ warranty period: 3 0 months after the date of delivery ] ] , complete air-conditioning system (passenger coaches) as per clause 4.38 of rdso specification no. rdso/pe/sp ec/emu/0196-2025 (rev.1) with all latest addendum corrigendum and annexures with necessary equipment such as 2 nos. roof mounted package unit (rmpu), micro-controller, bellows, gaskets and suitable drain arrangement including crimping lugs, cable markers with heat shrinkable sleeves for power and control cables, mating connectors, equipment mounting and earthin g hardware and accessories. (one set per coach) note: quantity includes spares as per sor attached with tender. [ warranty period: 30 months after the date of delivery ] ] , design and supply of electrical roof cable ducts/trays/flexible conduits up to various equipment of the train (not limited to sor items) with mounting & earthing hardware and associated accessories etc for all the rakes as per clause no.4.4 1.13 of rdso specification no. rdso/pe/spec/ emu/0196-2025 (rev.1) with all latest addendum corrigendum and annexures (o ne set per dtc). [ warranty period: 30 months after the date of delivery ] ] , design and supply of electrical roof cable ducts/trays/flexible conduits up to various equipment of the train (not limited to sor items) with mounting & earthing hardware and associated accessories etc for all the rakes as per clause no. 4.4 1.13 of rdso specification no. rdso/pe/spec/ emu/0196-2025 (rev.1) with all latest addendum corrigendum and annexures (o ne set per mc). [ warranty period: 30 months after the date of delivery ] ] , design and supply of electrical roof cable ducts/trays/flexible conduits up to various equipment of the train (not limited to sor items) with mounting & earthing hardware and associated accessories etc for all the rakes as per clause no. 4.4 1.13 of rdso specification no. rdso/pe/spec/ emu/0196-2025 (rev.1) with all latest addendum corrigendum and annexures (o ne set per tc). [ warranty period: 30 months after the date of delivery ] ] , design and supply of electrical roof cable ducts/trays/flexible conduits up to various equipment of the train (not limited to sor items) with mounting & earthing hardware and associated accessories etc for all the rakes as per clause no.4.4 1.13 of rdso specification no. rdso/pe/spec/ emu/0196-2025 (rev.1) with all latest addendum corrigendum and annexures. ( one set per ndtc). [ warranty period: 30 months after the date of delivery ] ] , lighting system (led based) including coach lights, (direct and indirect) along with local control switches at coach level , cabin lights, and disaster management light, emergency alarm indication lights, generally confirming to rdso/pe /spec/tl/0091 rev-2 or latest including control switchgear (separate switch gear for direct light & indirect light including 50% controls for each light circuit separately), terminal boards for branching of lights circuits, crimping lugs, cable markers with he at shrinkable sleeves for power and control cables, mating connectors, equipment mounting and earthing hardware and access ories . (refer clause 4.29, of rdso specification no. rdso/pe/spec/emu/0196-2025 (rev.1) with all latest addendum corrigend um and annexures (one set per mc coach) [ warranty period: 30 months after the date of delivery ] ] , lighting system (led based) including coach lights, (direct and indirect) along with local control switches at coach level , cabin lights, and disaster management light, emergency alarm indication lights, generally confirming to rdso/pe /spec/tl/0091 rev-2 or latest including control switchgear (separate switch gear for direct light & indirect light including 50% controls for each light circuit separately), terminal boards for branching of lights circuits, crimping lugs, cable markers with he at shrinkable sleeves for power and control cables, mating connectors, equipment mounting and earthing hardware and access ories . (refer clause 4.29, of rdso specification no. rdso/pe/spec/emu/0196-2025 (rev.1) with all latest addendum corrigend um and annexures (one set per tc coach) [ warranty period: 30 months after the date of delivery ] ] , lighting system (led based) including coach lights, (direct and indirect) along with local control switches at coach level , cabin lights, and disaster management light, emergency alarm indication lights, generally confirming to rdso/pe /spec/tl/0091 rev-2 or latest including control switchgear (separate switch gear for direct light & indirect light including 50% controls for each light circuit separately), terminal boards for branching of lights circuits, crimping lugs, cable markers with he at shrinkable sleeves for power and control cables, mating connectors, equipment mounting and earthing hardware and access ories . (refer clause 4.29, of rdso specification no. rdso/pe/spec/emu/0196-2025 (rev.1) with all latest addendum corrigend um and annexures (one set per ndtc coach) [ warranty period: 30 months after the date of delivery ] ] , automatic smoke, fire detection with alarm system in each coach as per clause 2.9.2 of rdso specification no. r dso/pe/spec/emu/0196-2025 (rev.1) with all latest addendum corrigendum and annexures. (one set per coach) [ warranty period: 30 months after the date of delivery ] ] , exterior lighting system (led based) viz.,, headlight, tail light, marker lights, flasher lights , signal exchange lig ht etc., as per clause 4.30, 4.31, 4.32, 4.33 of rdso specification no. rdso/pe/spec/emu/0196-2025 (rev.1) with all latest add endum corrigendum and annexures (in coach sets) [ warranty period: 30 months after the date of delivery ] ] , supervision of installation as per clause 18.3 & commissioning as per item no.18.4 of scc of the bid documents for 16 car rakes. (one set equal to one 16 car rake). [ warranty period: 30 months after the date of delivery ] ] , set of metal oxide gapless lightning arrestors (02 nos.) for 25 kv ac as per clause no. 4.4 of rdso specification no. rdso/pe/spec/emu/0196-2025(rev.1) with all latest addendum corrigendum and annexures (one set per basic unit). note : quantity includes spares as per sor attached with tender. [ warranty period: 30 months after the date of deliver y ] ] , lifting frames and special jigs & fixtures for mounting & dismounting of main converter and auxiliary converter [ warranty period: 30 months after the date of delivery ] ] , complete pre-fabricated driver desk housing all the necessary equipment and driver/ guard seat, master cum br ake controller , including crimping lugs, cable markers with heat shrinkable sleeves for power and control cables, mating conn ectors, equipment mounting and earthing hardware and accessories as per clause 4.15 & 4.16 of rdso specification no. rdso/ pe/spec/emu/0196-2025 (rev.1) with all latest addendum corrigendum and annexures note: 1.provision of interface (hardware and software) for kavach (tcas), brake equipment and rtis display shall be in the scope of supply. pneumatic horns, rolling b lind and sun visors are excluded. items separately mentioned in sor are also excluded from scope of driver desk. 2.based on the approved layout, a mockup of the complete driver cab shall be made at purchaser premises/ nominated place to finalize th e finer details and freeze the design as per clause 4.16.1(xii). (one set per dtc). [ warranty period: 30 months after the date of delivery ] ] , electrically operated wiper system with washer tank as per clause no. 4.16.1(iii) of rdso specification no. rdso/ pe/ spec/emu/0196-2025 (rev.1) with all latest addendum corrigendum and annexures.(one set per dtc) note: quantity in cludes spares as per sor attached with tender. [ warranty period: 30 months after the date of delivery ] ] , transformer mounting/dismounting kit (numbers) [ warranty period: 30 months after the date of delivery ] ] , high reach pantograph as per clause 4.42.1 of rdso specification no. rdso/pe/spec/emu/0196-2025 (rev.1) wit h all latest addendum corrigendum and annexures with mounting insulators, pneumatic control panel, panto isolating cocks inc luding interconnecting bus bars and associated stainless steel mounting hardware, mating connectors - single pantograph suit able for 25kv ac supply. (hr pantograph set) note: quantity includes spares as per sor attached with tender. [ wa rranty period: 30 months after the date of delivery ] ] , set of control equipment such as relays, contactors, circuit breakers and related switchgears etc. for propulsion system, controls and all auxiliaries including rmpu switch gears/panels in the assembled form viz. cubicle or cabinet as per cla use 4.21 of rdso specification no. rdso/pe/spec/emu/0196-2025 (rev.1) with all latest addendum corrigendum and annexure s. the scope also includes electrical switch gears for mini -pantry equipment in each coach. (one set per end basic unit) [ war ranty period: 30 months after the date of delivery ] ] , voice communication system passenger information system, wi-fi based infotainment system including their int egration, coach displays (both internal and external), front destination board (head code in dtcs), audio communication syste m, emergency talk back system and interface with the train monitoring system (tms), passenger alarm system with flush mou nted alarm push button with reset key mechanism with poly carbonate enclosure with separate led indications beside respecti ve push button area, external flush mounted, led based passenger alarm indicator on each side of the coach and any other eq uipment required for interfacing pis with the receiver equipment of tms as per clause 4.10, 4.11, and 4.20 of rdso specificati on no. rdso/pe/spec/emu/0196-2025 (rev.1) with all latest addendum corrigendum and annexures. (one set per end basic un it) note: quantity includes spares as per sor attached with tender. [ warranty period: 30 months after the date of delivery ] ] , all special tools, fixtures, gauges etc., for assembly /disassembly with bogie/axle of drive complete (including ge arbox, pinion, gear wheel and components of gear box) and traction motor. this includes special tools, fixtures, gauges for thei r overhauling/repairing also. (set) [ warranty period: 30 months after the date of delivery ] ] , diagnostic kit consisting of a laptop loaded with requisite life time licensed software and interface hardware for t esting & trouble shooting of propulsion system including power module of main and auxiliary converter-inverter, traction motor etc (set) [ warranty period: 30 months after the date of delivery ] ] , passenger car surveillance system as per clause 4.12 of rdso specification no. rdso/pe/spec/emu/0196-2025 ( rev.1) with all latest addendum corrigendum and annexures. (one set per middle basic unit) note: quantity includes spar es as per sor attached with tender. [ warranty period: 30 months after the date of delivery ] ] , passenger car surveillance system as per clause 4.12 of rdso specification no. rdso/pe/spec/emu/0196-2025 ( rev.1) with all latest addendum corrigendum and annexures. (one set per end basic unit) note: quantity includes spares as per sor attached with tender. [ warranty period: 30 months after the date of delivery ] ] , high voltage cable running on the roof for feeding adjacent units as per clause no. 4.26.3 (excluding vcb and ea rthing switch) and transformer ht cable with protection shield (as per clause 4.26.2) including isolation & protection system (e lectrical and mechanical), high voltage insulator, inter car jumper cable assembly along with crimping lugs, all mounting &eart hing hardware, mounting brackets and exterior cable protection system throughout the above roof area of rdso specification no. rdso/pe/spec/emu/ 0196-2025 (rev.1) with all latest addendum corrigendum and annexures. (one set per middle basic u nit).note: quantity includes spares as per sor attached with tender. [ warranty period: 30 months after the date of delivery ] ] , high voltage cable running on the roof for feeding adjacent units as per clause no. 4.26.3 (excluding vcb and ea rthing switch) and transformer ht cable with protection shield as per clause 4.26.2 including isolation & protection system (ele ctrical and mechanical) including high voltage insulator, inter car jumper cable assembly along with crimping lugs, all mountin g & earthing hardware, mounting brackets and exterior cable protection system throughout the above roof area of rdso speci fication no. rdso/pe/spec/emu/ 0196-2025 (rev.1) with all latest addendum corrigendum and annexures (one set per end bas ic unit). [ warranty period: 30 months after the date of delivery ] ] , set of control equipment such as relays, contactors, circuit breakers and related switchgears etc. for propulsion system, controls and all auxiliaries including rmpu switch gears/panels in the assembled form viz. cubicle or cabinet as per cla use 4.21 of rdso specification no. rdso/pe/spec/emu/0196-2025 (rev.1) with all latest addendum corrigendum and annexure s. the scope also includes electrical switch gears for mini -pantry equipment in each coach. (one set per middle basic unit) [ w arranty period: 30 months after the date of delivery ] ] , voice communication system passenger information system, wi-fi based infotainment system including their int egration, coach displays (both internal and external), audio communication system, emergency talk back system and interface with the train monitoring system (tms), passenger alarm system with flush mounted alarm push button with reset key mecha nism with poly carbonate enclosure with separate led indications beside respective push button area, external flush mounted, led based passenger alarm indicator on each side of the coach and any other equipment required for interfacing pis with the r eceiver equipment of tms as per clause 4.10, 4.11, and 4.20 of rdso specification no. rdso/pe/spec/emu/0196-2025 (rev.1) with all latest addendum corrigendum and annexures. (one set per middle basic unit) note: quantity includes spares as p er sor attached with tender. [ warranty period: 30 months after the date of delivery ] ] , load weighing system including redundant weight sensors at bogie level, junction boxes for interfacing cables, m ating connectors, ss hardware, cable markers and crimp contacts. the scope of supply of pressure transducers shall be with s upplier as per clause 4.25 of rdso specification no. rdso/pe/spec/emu/0196-2025 (rev.1) with all latest addendum corrigend um and annexures. (one set per coach). [ warranty period: 30 months after the date of delivery ] ] , camc for train set items covered under pl.nos. 31763224, 31918578, 31761100, 31711777, 31721278, 317212 80, 31903629, 31721308, 31720791, 31711856, 31711728, 31711741, 31713257, 31711832, 31711765, 31761094, 3190439 7, 31720833, 31721266, 31721254, 31918463, 31918554, 31918529, 31918505, 31918475, 31918566 and 31712113 for 05 y ears after completion of warranty period of two years (rate to be quoted year wise) as per the details mentioned in annexure- 8 of nit bid document excluding spare quantity of respective item. (one set per rake) [ warranty period: 2 years, amc peri od: 5 years, rate of discounting: 10 % ] ]
BOQ
| Sl. No. | Item Description |
|---|---|
| 1 | Traction transformer as per clause. 4.3 of RDSO specification no. RDSO/PE/SPEC/EMU/0196-2025(Rev.1) with all l atest addendum corrigendum and annexures with required number of secondary traction windings along with protection equip ment, Current Transformers, Potential Transformers, safety support arrangement including crimping lugs, cable markers with h eat shrinkable sleeves for power and control cables, mating connectors, equipment mounting and earthing hardware and assoc iated auxiliary machines such as oil pump, oil cooling blowers etc. as per clause 4.27 of RDSO spec. (One set per basic unit) N OTE: QUANTITY INCLUDES SPARES AS PER SOR ATTACHED WITH TENDER. [ Warranty Period: 30 Months after the date of deli very ] ] |
| 2 | IGBT or SiC based PWM Traction Converter set as per clause no. 4.5 of RDSO specification no. RDSO/PE/SPEC/EM U/0196-2025 (Rev.1) with all latest addendum corrigendum and annexures, including DC link with 100 HZ resonance filter, bra ke chopper resistor, DC link earthing switch, pre-charging resistors and contactors and/or any other equipment necessary to re duce the effect of other harmonics on S&T equipment, crimping lugs, cable markers with heat shrinkable sleeves for power and control cables, mating connectors, equipment mounting, earthing hardware and accessories including associated auxiliary mac hines as per clause 4.27 of RDSO Spec . (One set for one motor coach). NOTE: QUANTITY INCLUDES SPARES AS PER SOR ATTA CHED WITH TENDER. [ Warranty Period: 30 Months after the date of delivery ] ] |
| 3 | Battery, Battery box and Battery Charger including battery management system (as required) as per clause 4.28 of RDSO specification no. RDSO/PE/SPEC/EMU/0196-2025 (Rev.1) with all latest addendum corrigendum and annexures (One se t per basic unit). NOTE: QUANTITY INCLUDES 4 SETS AS SPARES. [ Warranty Period: 30 Months after the date of delivery ] ] |
| 4 | 3-phase to single phase underslung transformer of adequate capacity (not less than 20 kVA) for auxiliary loads o perating at 230 V AC and 110 V AC as per clause no. 4.1.1 (XXXX) of RDSO specification no. RDSO/PE/SPEC/EMU/0196-2025 (Re v.1) with all latest addendum corrigendum and annexures. Note: The output voltage range and capacity of each output will be decided during detailed design stage. The drawing referred in the specification ICF/Elec/160 Rev 0 or latest is for reference only . (One per coach). NOTE: QUANTITY INCLUDES SPARES AS PER SOR ATTACHED WITH TENDER. [ Warranty Period: 30 Months after the date of delivery ] ] |
| 5 | IGBT/SiC based auxiliary converter catering power supply to all auxiliaries as per clause no. 4.27 of RDSO specifi cation no. RDSO/PE/SPEC/EMU/0196-2025 (Rev.1) with all latest addendum corrigendum and annexures Excluding Auxiliary Co mpressor as per clause no. 4.27.18 of RDSO spec. The supply shall include fasteners, crimping lugs, cable markers with heat s hrinkable sleeves for power and control cables, mating connectors, equipment mounting and earthing hardware and associate d auxiliary machines (One set per basic unit).NOTE: QUANTITY INCLUDES SPARES AS PER SOR ATTACHED WITH TENDER. [ War ranty Period: 30 Months after the date of delivery ] ] |
| 6 | Roof Mounted Cab AC (minimum capacity 2.0 TR) rivet less design with Control panel, mating connectors, water drain arrangement in the unit including mounting frame and anchoring arrangement to coach body and all accessories/hardware generally conforming to but not restricted to RDSO specification no. RDSO/2007/EL/ SPEC/0055 (latest) ( One set per DTC). NOTE: QUANTITY INCLUDES SPARES AS PER SOR ATTACHED WITH TENDER. [ Warranty Period: 30 Months after the date of delivery ] ] |
| 7 | A 110 V DC battery operated auxiliary compressor set as per clause 4.27.18 of RDSO specification no. RDSO/PE/S PEC/EMU/0196-2025 (Rev.1) with all latest addendum corrigendum and annexures, with Capacity not less than 100 LPM / 1 HP. Auxiliary compressor for pantograph shall be supplied as a module duly including - Aux.Compressor-1, safety valve -1, check v alve -2, pressure switch -1, Air Filter -1, 35 L Reservoir -1, Isolating cocks-2 and other associated equipment required for satisfa ctory functioning of Auxiliary compressor. (one set per basic unit) NOTE: QUANTITY INCLUDES SPARES AS PER SOR ATTACHED WITH TENDER. [ Warranty Period: 30 Months after the date of delivery ] ] |
| 8 | Lighting system (LED based) including coach lights,(Direct and indirect)along with local control switches at coac h level , cabin lights, and Disaster Management Light, Emergency alarm indication lights, 3-PIN Charging socket & switch along with USB type A and Type C (Fast charging), generally confirming to RDSO/PE/SPEC/TL/0091 Rev-2 or latest and USB socket co nfirming to RCF specification EDTS-411 with latest addendum/corrigendum, 3 pin socket confirming to IS 1293 latest & switche s confirming to IS 3854 latest including control switchgear (separate switch gear for Direct light & Indirect light including 50% c ontrols for each light circuit separately), Terminal boards for branching of Lights circuits, crimping lugs, cable markers with hea t shrinkable sleeves for power and control cables, mating connectors, equipment mounting and earthing hardware and accesso ries . (Refer Clause 4.29, of RDSO specification no. RDSO/PE/SPEC/EMU/0196-2025 (Rev.1) with all latest addendum corrigendu m and annexures (IN COACH SETS) [ Warranty Period: 30 Months after the date of delivery ] ] |
| 9 | Installation of cable ducts, trays, conduits, pre-assembled harness duly crimping, dressing, Bunching, termination of cable etc. (as mentioned in SOR item no.28 & 29) in the coach for 02 prototype rakes as per clause 4.41.13 of RDSO specific ation no. RDSO/PE/SPEC/EMU/0196-2025 (Rev.1) with all latest addendum corrigendum and annexures. Supply of one set of Ins tallation Jigs and fixture and its drawings, for each type of coach shall be part of scope of supply. (One set per rake). Note: Eve ry successful bidder to carry out the above activity for 2 prototype rakes. [ Warranty Period: 30 Months after the date of deli very ] ] |
| 10 | Cable Transit System with EPDM type cable gland rubber modules to 4.1.1 (xxxiii) & 4.41.8 of RDSO specification no. RDSO/PE/SPEC/EMU/0196-2025 (Rev.1) with all latest addendum corrigendum and annexures for sealing & shielding includi ng mounting hardware and fixing brackets generally conforming to but not restricted to RDSO specification no. RDSO/2008/EL/ SPEC/0067(latest). Suitable EMC methodology to be adopted (One set per Middle Basic Unit) [ Warranty Period: 30 Months af ter the date of delivery ] ] |
| 11 | Inter-vehicular couplers (Power and control) with coach jumper cable assembly assembled on SS plate including crimping lugs, cable markers with heat shrinkable sleeves, mating connectors, equipment mounting and earthing SS hardware and other associated accessories excluding Train line cables as per clause no. 4.41 of RDSO specification no. RDSO/PE/SPEC/EMU/0196-2025 (Rev.1) with all latest addendum corrigendum and annexures (One set per End Basic Unit). [ W arranty Period: 30 Months after the date of delivery ] ] |
| 12 | Cable Transit System with EPDM type cable gland rubber modules to 4.1.1 (xxxiii) & 4.41.8 of RDSO specification no. RDSO/PE/SPEC/EMU/0196-2025 (Rev.1) with all latest addendum corrigendum and annexures for sealing & shielding includi ng mounting hardware and fixing brackets generally conforming to but not restricted to RDSO specification no. RDSO/2008/EL/ SPEC/0067(latest). Suitable EMC methodology to be adopted (One set per End Basic Unit) [ Warranty Period: 30 Months after the date of delivery ] ] |
| 13 | Inter-vehicular couplers (Power and control) with coach jumper cable assembly assembled on SS plate including crimping lugs, cable markers with heat shrinkable sleeves, mating connectors, equipment mounting and earthing SS hardware and other associated accessories excluding Train line cables as per clause no. 4.41 of RDSO specification no. RDSO/PE/SPEC/EMU/0196-2025 (Rev.1) with all latest addendum corrigendum and annexures (One set per Middle Basic Unit). N OTE: QUANTITY INCLUDES SPARES AS PER SOR ATTACHED WITH TENDER. [ Warranty Period: 30 Months after the date of deli very ] ] |
| 14 | Power, control, Train line , Data / communication cables, fire survival cables in pre-harnessed form (as per claus e 4.41.13) including crimping lugs/Sockets/Wire end ferrules, suitable connectors, cable markers with heat shrinkable sleeves a nd other accessories like flexible conduits, cable jacket,End fittings ,Straight connectors etc. as per clause no. 4.41 and other r elevant clauses of RDSO specification no. RDSO/PE/SPEC/EMU/0196-2025 (Rev.1) with all latest addendum corrigendum and an nexures (The scope of supply does not include IV couplers under clause 4.41.14 (v) of RDSO specification) (One set per Middle Basic Unit). [ Warranty Period: 30 Months after the date of delivery ] ] |
| 15 | Power, control, Train line , Data / communication cables, fire survival cables in pre-harnessed form (as per claus e 4.41.13) including crimping lugs/Sockets/Wire end ferrules , suitable connectors, cable markers with heat shrinkable sleeves and other accessories like flexible conduits ,cable jacket, End fittings ,Straight connectors etc. as per clause no. 4.41 and other relevant clauses of RDSO specification no. RDSO/PE/SPEC/EMU/0196-2025 (Rev.1) with all latest addendum corrigendum and a nnexures (The scope of supply does not include IV couplers under clause 4.41.14 (v) of RDSO specification) (One set per End B asic Unit). [ Warranty Period: 30 Months after the date of delivery ] ] |
| 16 | Lighting system (LED based) including coach lights, (Direct and indirect) along with local control switches at coach level, cabin lights, Headlight, Tail light, Marker lights, Flasher lights, signal exchange light (along with PFC (Potential free contact) to enable LED based Signal Exchange light working status), Disaster Management Light, Emergency alarm indication li ghts, generally confirming to RDSO/PE/SPEC/TL/0091 Rev-2 or latest including control switchgear (separate switch gear for Dire ct light & Indirect light including 50% controls for each light circuit separately), Terminal boards for branching of Lights circuits, crimping lugs, cable markers with heat shrinkable sleeves for power and control cables, mating connectors, equipment mounti ng and earthing hardware and accessories. (Refer Clause 4.29, 4.30, 4.31, 4.32, 4.33 of RDSO specification no. RDSO/PE/SPEC/ EMU/0196-2025 (Rev.1) with all latest addendum corrigendum and annexures (one set per DTC) [ Warranty Period: 30 Mont hs after the date of delivery ] ] |
| 17 | Design and supply of electrical Underframe cable ducts/trays/conduits up to various equipment of the train (Not l imited to SOR items) with mounting & earthing hardware and associated accessories etc for all the rakes as per clause no 4.41. 13 of RDSO specification no. RDSO/PE/SPEC/ EMU/0196-2025 (Rev.1) with all latest addendum corrigendum and annexures (On e set per Basic unit) [ Warranty Period: 30 Months after the date of delivery ] ] |
| 18 | Three-phase fully suspended asynchronous induction motors or Permanent Magnet Synchronous Motor (encapsul ated design of traction motor will also be acceptable) as per clause no. 4.6 of RDSO specification no. RDSO/PE/SPEC/EMU/0196- 2025(Rev.1) with all latest addendum corrigendum and annexure compatible with IGBT/SiC based traction converter power sup ply, with coupling, gear box assembly with all the required fasteners, reaction arm and metal bonded rubber items, required se nsors and associated equipment including crimping lugs, cable markers with heat shrinkable sleeves for power and control cab les, mating connectors, along with all the required hardware, metal bonded rubber items required for fixing traction motor with the bogie frame, equipment mounting and earthing hardware and accessories. (One set consists of 4 Traction Motor assembly) NOTE: QUANTITY INCLUDES SPARES AS PER SOR ATTACHED WITH TENDER. [ Warranty Period: 30 Months after the date of d elivery ] ] |
| 19 | Speed Indicating cum recording equipment as per clause 4.19 of RDSO specification no. RDSO/PE/SPEC/EMU/019 6-2025 (Rev.1) with all latest addendum corrigendum and annexures. (One set per DTC) [ Warranty Period: 30 Months after the date of delivery ] ] |
| 20 | Set of two VCBs and two earthing switches for traction circuit protection and HT cable protection as per clause n o. 4.26.1 and 4.1.1(xxxv) of RDSO specification no. RDSO/PE/SPEC/EMU/0196-2025 (Rev.1) with all latest addendum corrigendu m and annexures (One set per basic unit). NOTE: QUANTITY INCLUDES SPARES AS PER SOR ATTACHED WITH TENDER. [ Warra nty Period: 30 Months after the date of delivery ] ] |
| 21 | Microprocessor based Train Control and Management System (TCMS) as per clause no.4.8 of RDSO specification no. RDSO/PE/SPEC/EMU/0196-2025 (Rev.1) with all latest addendum corrigendum and annexures), with Brake interface unit inc luding fault diagnosis and display system in the driving cab and multiplexing system for relevant control & other signals, remot e diagnostics and tracking system, Wheel slip/slide protection & anti-skid controls (as per clause no. 4.24) including integration of Automatic Door closure system, Brake system and Fire Detection system. (One set per Middle Basic unit) [ Warranty Perio d: 30 Months after the date of delivery ] ] |
| 22 | Microprocessor based Train Control and Management System (TCMS) as per clause no.4.8 of RDSO specification no. RDSO/PE/SPEC/EMU/0196-2025 (Rev.1) with all latest addendum corrigendum and annexures), with Brake interface unit inc luding fault diagnosis and display system in the driving cab and multiplexing system for relevant control & other signals, remot e diagnostics and tracking system, Wheel slip/slide protection & anti-skid controls (as per clause no. 4.24) including integration of Automatic Door closure system, Brake system and Fire Detection system. (One set per End Basic unit) [ Warranty Period: 30 Months after the date of delivery ] ] |
| 23 | Set of Equipment, switch gears for Toilet operation in emergency mode in assembled form including pre-wired p ump control panel assembly, 750 VA INVERTER and its set of contactors as per specification ICF/Elec/175(latest). (VTC compres sor and VTC Pressure switch is not in scope of supply) (One set per coach) [ Warranty Period: 30 Months after the date of del ivery ] ] |
| 24 | Event Recorder as per clause 4.9 including cab Recording Equipment as per clause 4.13 of RDSO specification no . RDSO/PE/SPEC/ EMU/0196-2025 (Rev.1) with all latest addendum corrigendum and annexures (One set per Rake). [ Warrant y Period: 30 Months after the date of delivery ] ] |
| 25 | CCMS (Centralized Coach Monitoring System) as per clause 4.43 of RDSO specification no. RDSO/PE/SPEC/EMU/0 196-2025 (Rev.1) with all latest addendum corrigendum and annexures. (One set per DTC) [ Warranty Period: 30 Months aft er the date of delivery ] ] |
| 26 | Pantograph with mounting insulators, pneumatic control panel, panto isolating cocks including interconnecting b us bars and associated stainless steel mounting hardware, mating connectors - Single pantograph suitable for 25kV AC supply as per clause 4.42 of RDSO specification no. RDSO/PE/SPEC/EMU/0196-2025 (Rev.1) with all latest addendum corrigendum and annexures (Pantograph Set) NOTE: QUANTITY INCLUDES SPARES AS PER SOR ATTACHED WITH TENDER. [ Warranty Period: 3 0 Months after the date of delivery ] ] |
| 27 | Complete air-conditioning system (passenger coaches) as per clause 4.38 of RDSO specification no. RDSO/PE/SP EC/EMU/0196-2025 (Rev.1) with all latest addendum corrigendum and annexures with necessary equipment such as 2 nos. Roof Mounted Package Unit (RMPU), micro-controller, bellows, gaskets and suitable drain arrangement including crimping lugs, cable markers with heat shrinkable sleeves for power and control cables, mating connectors, equipment mounting and earthin g hardware and accessories. (One set per coach) NOTE: QUANTITY INCLUDES SPARES AS PER SOR ATTACHED WITH TENDER. [ Warranty Period: 30 Months after the date of delivery ] ] |
| 28 | Design, development, manufacture, supply, integration, testing and commissioning of IGBT/SiC based 3-phase pr opulsion, control and other equipment for chair car version train sets suitable for operation on 25kv AC OHE system conforming to RDSO specification no. RDSO/PE/SPEC/EMU/0196-2025 (rev.1) along with all latest addendum corrigendum and applicable an nexures (excluding Annexure-XII of RDSO specification No. RDSO/PE/SPEC/EMU/0196-2025 (Rev. 1) wherever applicable as per SOR) but without design and supply of bogie. The firm to provide necessary instrumentation and special tools as per clause no. 1.8.11 of RDSO spec required for commissioning and field-testing of the equipment. Scope of supply also includes training of IR personnel as per clause XXXX of SCC of the bid documents at supplier's premises and at ICF and other railway works for propul sion system. CAMC as per Annexure - 8 for items mentioned at GRP-1, PL.No. 3176N002 of item details of tender document. Bi dders should factor in the quoted prices of the items of any other equipment on returnable basis, which the bidder feels necess ary or shall be required during manufacturing, installation, testing/trails of the trainsets but not included in item details of tend er document from GRP-1 S.no.1 to 57. Note: 1. The bidders are advised to quote only Rs.1/- against this item for accountal purp ose. 2. Additional information to tender description is at s.no.12 of special conditions of tender document. [ Warranty Period: 30 Months after the date of delivery ] ] |
| 29 | Design and supply of electrical Roof cable ducts/trays/flexible conduits up to various equipment of the train (Not Limited to SOR items) with mounting & earthing hardware and associated accessories etc for all the rakes as per clause no.4.4 1.13 of RDSO specification no. RDSO/PE/SPEC/ EMU/0196-2025 (Rev.1) with all latest addendum corrigendum and annexures (O ne set per DTC). [ Warranty Period: 30 Months after the date of delivery ] ] |
| 30 | Design and supply of electrical Roof cable ducts/trays/flexible conduits up to various equipment of the train (Not Limited to SOR items) with mounting & earthing hardware and associated accessories etc for all the rakes as per clause no. 4.4 1.13 of RDSO specification no. RDSO/PE/SPEC/ EMU/0196-2025 (Rev.1) with all latest addendum corrigendum and annexures (O ne set per MC). [ Warranty Period: 30 Months after the date of delivery ] ] |
| 31 | Design and supply of electrical Roof cable ducts/trays/flexible conduits up to various equipment of the train (Not Limited to SOR items) with mounting & earthing hardware and associated accessories etc for all the rakes as per clause no. 4.4 1.13 of RDSO specification no. RDSO/PE/SPEC/ EMU/0196-2025 (Rev.1) with all latest addendum corrigendum and annexures (O ne set per TC). [ Warranty Period: 30 Months after the date of delivery ] ] |
| 32 | Design and supply of electrical Roof cable ducts/trays/flexible conduits up to various equipment of the train (Not Limited to SOR items) with mounting & earthing hardware and associated accessories etc for all the rakes as per clause no.4.4 1.13 of RDSO specification no. RDSO/PE/SPEC/ EMU/0196-2025 (Rev.1) with all latest addendum corrigendum and annexures. ( One set per NDTC). [ Warranty Period: 30 Months after the date of delivery ] ] |
| 33 | Lighting system (LED based) including coach lights, (Direct and indirect) along with local control switches at coach level , cabin lights, and Disaster Management Light, Emergency alarm indication lights, generally confirming to RDSO/PE /SPEC/TL/0091 Rev-2 or latest including control switchgear (separate switch gear for Direct light & Indirect light including 50% controls for each light circuit separately), Terminal boards for branching of Lights circuits, crimping lugs, cable markers with he at shrinkable sleeves for power and control cables, mating connectors, equipment mounting and earthing hardware and access ories . (Refer Clause 4.29, of RDSO specification no. RDSO/PE/SPEC/EMU/0196-2025 (Rev.1) with all latest addendum corrigend um and annexures (one set per MC coach) [ Warranty Period: 30 Months after the date of delivery ] ] |
| 34 | Lighting system (LED based) including coach lights, (Direct and indirect) along with local control switches at coach level , cabin lights, and Disaster Management Light, Emergency alarm indication lights, generally confirming to RDSO/PE /SPEC/TL/0091 Rev-2 or latest including control switchgear (separate switch gear for Direct light & Indirect light including 50% controls for each light circuit separately), Terminal boards for branching of Lights circuits, crimping lugs, cable markers with he at shrinkable sleeves for power and control cables, mating connectors, equipment mounting and earthing hardware and access ories . (Refer Clause 4.29, of RDSO specification no. RDSO/PE/SPEC/EMU/0196-2025 (Rev.1) with all latest addendum corrigend um and annexures (one set per TC coach) [ Warranty Period: 30 Months after the date of delivery ] ] |
| 35 | Lighting system (LED based) including coach lights, (Direct and indirect) along with local control switches at coach level , cabin lights, and Disaster Management Light, Emergency alarm indication lights, generally confirming to RDSO/PE /SPEC/TL/0091 Rev-2 or latest including control switchgear (separate switch gear for Direct light & Indirect light including 50% controls for each light circuit separately), Terminal boards for branching of Lights circuits, crimping lugs, cable markers with he at shrinkable sleeves for power and control cables, mating connectors, equipment mounting and earthing hardware and access ories . (Refer Clause 4.29, of RDSO specification no. RDSO/PE/SPEC/EMU/0196-2025 (Rev.1) with all latest addendum corrigend um and annexures (one set per NDTC coach) [ Warranty Period: 30 Months after the date of delivery ] ] |
| 36 | Automatic smoke, fire detection with alarm system in each coach as per clause 2.9.2 of RDSO specification no. R DSO/PE/SPEC/EMU/0196-2025 (Rev.1) with all latest addendum corrigendum and annexures. (One set per coach) [ Warranty Period: 30 Months after the date of delivery ] ] |
| 37 | Exterior Lighting system (LED based) viz.,, Headlight, Tail light, Marker lights, Flasher lights , signal exchange lig ht etc., as per Clause 4.30, 4.31, 4.32, 4.33 of RDSO specification no. RDSO/PE/SPEC/EMU/0196-2025 (Rev.1) with all latest add endum corrigendum and annexures (IN COACH SETS) [ Warranty Period: 30 Months after the date of delivery ] ] |
| 38 | Supervision of installation as per clause 18.3 & Commissioning as per item No.18.4 of SCC of the bid documents for 20 car rakes. (One set equal to one 20 car rake). [ Warranty Period: 30 Months after the date of delivery ] ] |
| 39 | Set of Metal oxide Gapless lightning arrestors (02 nos.) for 25 KV AC as per clause no. 4.4 of RDSO specification no. RDSO/PE/SPEC/EMU/0196-2025(Rev.1) with all latest addendum corrigendum and annexures (One set per basic unit). NOTE : QUANTITY INCLUDES SPARES AS PER SOR ATTACHED WITH TENDER. [ Warranty Period: 30 Months after the date of deliver y ] ] |
| 40 | Lifting frames and special jigs & fixtures for mounting & dismounting of Main converter and Auxiliary converter [ Warranty Period: 30 Months after the date of delivery ] ] |
| 41 | Complete pre-fabricated driver desk housing all the necessary equipment and driver/ guard seat, Master cum Br ake controller , including crimping lugs, cable markers with heat shrinkable sleeves for power and control cables, mating conn ectors, equipment mounting and earthing hardware and accessories as per clause 4.15 & 4.16 of RDSO specification no. RDSO/ PE/SPEC/EMU/0196-2025 (Rev.1) with all latest addendum corrigendum and annexures Note: 1.Provision of Interface (hardware and Software) for KAVACH (TCAS), Brake equipment and RTIS display shall be in the scope of supply. Pneumatic horns, rolling b lind and Sun visors are excluded. Items separately mentioned in SOR are also excluded from Scope of Driver Desk. 2.Based on the approved layout, a mockup of the complete driver cab shall be made at purchaser premises/ nominated place to finalize th e finer details and freeze the design as per clause 4.16.1(xii). (One set per DTC). [ Warranty Period: 30 Months after the date of delivery ] ] |
| 42 | Electrically operated wiper system with washer tank as per clause no. 4.16.1(iii) of RDSO specification no. RDSO/ PE/ SPEC/EMU/0196-2025 (Rev.1) with all latest addendum corrigendum and annexures.(One set per DTC) NOTE: QUANTITY IN CLUDES SPARES AS PER SOR ATTACHED WITH TENDER. [ Warranty Period: 30 Months after the date of delivery ] ] |
| 43 | Transformer Mounting/dismounting kit (Numbers) [ Warranty Period: 30 Months after the date of delivery ] ] |
| 44 | High reach pantograph as per Clause 4.42.1 of RDSO specification no. RDSO/PE/SPEC/EMU/0196-2025 (Rev.1) wit h all latest addendum corrigendum and annexures with mounting insulators, pneumatic control panel, panto isolating cocks inc luding interconnecting bus bars and associated stainless steel mounting hardware, mating connectors - Single pantograph suit able for 25kV AC supply. (HR Pantograph Set) NOTE: QUANTITY INCLUDES SPARES AS PER SOR ATTACHED WITH TENDER. [ Wa rranty Period: 30 Months after the date of delivery ] ] |
| 45 | Set of Control Equipment such as relays, contactors, circuit breakers and related switchgears etc. for propulsion system, controls and all auxiliaries including RMPU switch gears/panels in the assembled form viz. cubicle or cabinet as per cla use 4.21 of RDSO specification no. RDSO/PE/SPEC/EMU/0196-2025 (Rev.1) with all latest addendum corrigendum and annexure s. The scope also includes electrical switch gears for Mini -Pantry equipment in each coach. (One set per End Basic Unit) [ War ranty Period: 30 Months after the date of delivery ] ] |
| 46 | Voice communication system Passenger information system, Wi-Fi based infotainment system including their int egration, coach displays (both internal and external), front destination board (Head code in DTCs), audio communication syste m, emergency talk back system and interface with the Train Monitoring System (TMS), Passenger Alarm system with Flush mou nted alarm push button with reset key mechanism with poly carbonate enclosure with separate LED indications beside respecti ve push button area, external flush mounted, LED based passenger alarm indicator on each side of the coach and any other eq uipment required for interfacing PIS with the Receiver equipment of TMS as per clause 4.10, 4.11, and 4.20 of RDSO specificati on no. RDSO/PE/SPEC/EMU/0196-2025 (Rev.1) with all latest addendum corrigendum and annexures. (one set per End Basic Un it) NOTE: QUANTITY INCLUDES SPARES AS PER SOR ATTACHED WITH TENDER. [ Warranty Period: 30 Months after the date of delivery ] ] |
| 47 | All special tools, fixtures, gauges etc., for assembly /disassembly with bogie/axle of drive complete (including ge arbox, pinion, gear wheel and components of gear box) and Traction motor. This includes special tools, fixtures, gauges for thei r Overhauling/repairing also. (set) [ Warranty Period: 30 Months after the date of delivery ] ] |
| 48 | Diagnostic Kit consisting of a laptop loaded with requisite life time licensed software and interface hardware for t esting & trouble shooting of propulsion system including power module of main and auxiliary converter-inverter, Traction motor etc (set) [ Warranty Period: 30 Months after the date of delivery ] ] |
| 49 | Passenger car Surveillance System as per clause 4.12 of RDSO specification no. RDSO/PE/SPEC/EMU/0196-2025 ( Rev.1) with all latest addendum corrigendum and annexures. (One set per Middle Basic Unit) NOTE: QUANTITY INCLUDES SPAR ES AS PER SOR ATTACHED WITH TENDER. [ Warranty Period: 30 Months after the date of delivery ] ] |
| 50 | Passenger car Surveillance System as per clause 4.12 of RDSO specification no. RDSO/PE/SPEC/EMU/0196-2025 ( Rev.1) with all latest addendum corrigendum and annexures. (One set per End Basic Unit) NOTE: QUANTITY INCLUDES SPARES AS PER SOR ATTACHED WITH TENDER. [ Warranty Period: 30 Months after the date of delivery ] ] |
| 51 | High Voltage cable running on the roof for feeding adjacent units as per clause no. 4.26.3 (excluding VCB and Ea rthing Switch) and Transformer HT cable with protection shield (as per clause 4.26.2) including isolation & protection system (e lectrical and mechanical), high voltage insulator, inter car jumper cable assembly along with crimping lugs, all mounting &eart hing hardware, mounting brackets and exterior cable protection system throughout the above roof area of RDSO specification no. RDSO/PE/SPEC/EMU/ 0196-2025 (Rev.1) with all latest addendum corrigendum and annexures. (One set per Middle Basic U nit).NOTE: QUANTITY INCLUDES SPARES AS PER SOR ATTACHED WITH TENDER. [ Warranty Period: 30 Months after the date of delivery ] ] |
| 52 | High Voltage cable running on the roof for feeding adjacent units as per clause no. 4.26.3 (excluding VCB and Ea rthing Switch) and Transformer HT cable with protection shield as per clause 4.26.2 including isolation & protection system (ele ctrical and mechanical) including high voltage insulator, inter car jumper cable assembly along with crimping lugs, all mountin g & earthing hardware, mounting brackets and exterior cable protection system throughout the above roof area of RDSO speci fication no. RDSO/PE/SPEC/EMU/ 0196-2025 (Rev.1) with all latest addendum corrigendum and annexures (One set per End Bas ic Unit). [ Warranty Period: 30 Months after the date of delivery ] ] |
| 53 | Set of Control Equipment such as relays, contactors, circuit breakers and related switchgears etc. for propulsion system, controls and all auxiliaries including RMPU switch gears/panels in the assembled form viz. cubicle or cabinet as per cla use 4.21 of RDSO specification no. RDSO/PE/SPEC/EMU/0196-2025 (Rev.1) with all latest addendum corrigendum and annexure s. The scope also includes electrical switch gears for Mini -Pantry equipment in each coach. (One set per Middle Basic Unit) [ W arranty Period: 30 Months after the date of delivery ] ] |
| 54 | Voice communication system Passenger information system, Wi-Fi based infotainment system including their int egration, coach displays (both internal and external), audio communication system, emergency talk back system and interface with the Train Monitoring System (TMS), Passenger Alarm system with Flush mounted alarm push button with reset key mecha nism with poly carbonate enclosure with separate LED indications beside respective push button area, external flush mounted, LED based passenger alarm indicator on each side of the coach and any other equipment required for interfacing PIS with the R eceiver equipment of TMS as per clause 4.10, 4.11, and 4.20 of RDSO specification no. RDSO/PE/SPEC/EMU/0196-2025 (Rev.1) with all latest addendum corrigendum and annexures. (one set per Middle Basic Unit) NOTE: QUANTITY INCLUDES SPARES AS P ER SOR ATTACHED WITH TENDER. [ Warranty Period: 30 Months after the date of delivery ] ] |
| 55 | Load weighing system including redundant weight sensors at bogie level, junction boxes for interfacing cables, m ating connectors, SS hardware, cable markers and crimp contacts. The scope of supply of pressure transducers shall be with S upplier as per clause 4.25 of RDSO specification no. RDSO/PE/SPEC/EMU/0196-2025 (Rev.1) with all latest addendum corrigend um and annexures. (One set per coach). [ Warranty Period: 30 Months after the date of delivery ] ] |
| 56 | Supply and commissioning of Set of tools as per details at.Annexure T consisting of A. Control Terminal Crimping Tools - (2 items), B. Communication and Control Terminal Crimping Tools - (5 items), C. Power Tubular Crimping Tools - (2 items ), D. Supporting tools - (3 items), E. Lifting Platforms Tools - (5 items) F. Mechanical Installation supporting Tools - (4 items) (On e set to be supplied by each supplier.) [ Warranty Period: 30 Months after the date of delivery ] ] |
| 57 | CAMC for Train set items covered under PL.nos.31763224, 31918578, 31761100, 31711777, 31721278, 3172128 0, 31903629, 31721308, 31720791, 31711856, 31711728, 31711741, 31713257, 31711832, 31711765, 31761094, 31904397, 31720833, 31721266, 31721254, 31918463, 31918554, 31918529, 31918505, 31918475, 31918566 and 31712113 for 05 yea rs after completion of warranty period of two years (rate to be quoted year wise) as per the details mentioned in ANNEXURE-8 of NIT Bid document excluding spare quantity of respective item. (one set per Rake) [ Warranty Period: 2 years, AMC Perio d: 5 years, Rate of Discounting: 10 % ] ] |
| 58 | Traction transformer as per clause. 4.3 of RDSO specification no. RDSO/PE/SPEC/EMU/0196-2025(Rev.1) with all l atest addendum corrigendum and annexures with required number of secondary traction windings along with protection equip ment, Current Transformers, Potential Transformers, safety support arrangement including crimping lugs, cable markers with h eat shrinkable sleeves for power and control cables, mating connectors, equipment mounting and earthing hardware and assoc iated auxiliary machines such as oil pump, oil cooling blowers etc. as per clause 4.27 of RDSO spec. (One set per basic unit) N OTE: QUANTITY INCLUDES SPARES AS PER SOR ATTACHED WITH TENDER. [ Warranty Period: 30 Months after the date of deli very ] ] |
| 59 | IGBT or SiC based PWM Traction Converter set as per clause no. 4.5 of RDSO specification no. RDSO/PE/SPEC/EM U/0196-2025 (Rev.1) with all latest addendum corrigendum and annexures, including DC link with 100 HZ resonance filter, bra ke chopper resistor, DC link earthing switch, pre-charging resistors and contactors and/or any other equipment necessary to re duce the effect of other harmonics on S&T equipment, crimping lugs, cable markers with heat shrinkable sleeves for power and control cables, mating connectors, equipment mounting, earthing hardware and accessories including associated auxiliary mac hines as per clause 4.27 of RDSO Spec . (One set for one motor coach). NOTE: QUANTITY INCLUDES SPARES AS PER SOR ATTA CHED WITH TENDER. [ Warranty Period: 30 Months after the date of delivery ] ] |
| 60 | Battery, Battery box and Battery Charger including battery management system (as required) as per clause 4.28 of RDSO specification no. RDSO/PE/SPEC/EMU/0196-2025 (Rev.1) with all latest addendum corrigendum and annexures (One se t per basic unit). NOTE: QUANTITY INCLUDES 4 SETS AS SPARES. [ Warranty Period: 30 Months after the date of delivery ] ] |
| 61 | 3-phase to single phase underslung transformer of adequate capacity (not less than 20 kVA) for auxiliary loads o perating at 230 V AC and 110 V AC as per clause no. 4.1.1 (XXXX) of RDSO specification no. RDSO/PE/SPEC/EMU/0196-2025 (Re v.1) with all latest addendum corrigendum and annexures. Note: The output voltage range and capacity of each output will be decided during detailed design stage. The drawing referred in the specification ICF/Elec/160 Rev 0 or latest is for reference only . (One per coach). NOTE: QUANTITY INCLUDES SPARES AS PER SOR ATTACHED WITH TENDER. [ Warranty Period: 30 Months after the date of delivery ] ] |
| 62 | IGBT/SiC based auxiliary converter catering power supply to all auxiliaries as per clause no. 4.27 of RDSO specifi cation no. RDSO/PE/SPEC/EMU/0196-2025 (Rev.1) with all latest addendum corrigendum and annexures Excluding Auxiliary Co mpressor as per clause no. 4.27.18 of RDSO spec. The supply shall include fasteners, crimping lugs, cable markers with heat s hrinkable sleeves for power and control cables, mating connectors, equipment mounting and earthing hardware and associate d auxiliary machines (One set per basic unit).NOTE: QUANTITY INCLUDES SPARES AS PER SOR ATTACHED WITH TENDER. [ War ranty Period: 30 Months after the date of delivery ] ] |
| 63 | Roof Mounted Cab AC (minimum capacity 2.0 TR) rivet less design with Control panel, mating connectors, water drain arrangement in the unit including mounting frame and anchoring arrangement to coach body and all accessories/hardware generally conforming to but not restricted to RDSO specification no. RDSO/2007/EL/ SPEC/0055 (latest) ( One set per DTC). NOTE: QUANTITY INCLUDES SPARES AS PER SOR ATTACHED WITH TENDER. [ Warranty Period: 30 Months after the date of delivery ] ] |
| 64 | A 110 V DC battery operated auxiliary compressor set as per clause 4.27.18 of RDSO specification no. RDSO/PE/S PEC/EMU/0196-2025 (Rev.1) with all latest addendum corrigendum and annexures, with Capacity not less than 100 LPM / 1 HP. Auxiliary compressor for pantograph shall be supplied as a module duly including - Aux.Compressor-1, safety valve -1, check v alve -2, pressure switch -1, Air Filter -1, 35 L Reservoir -1, Isolating cocks-2 and other associated equipment required for satisfa ctory functioning of Auxiliary compressor. (one set per basic unit) NOTE: QUANTITY INCLUDES SPARES AS PER SOR ATTACHED WITH TENDER. [ Warranty Period: 30 Months after the date of delivery ] ] |
| 65 | Lighting system (LED based) including coach lights,(Direct and indirect)along with local control switches at coac h level , cabin lights, and Disaster Management Light, Emergency alarm indication lights, 3-PIN Charging socket & switch along with USB type A and Type C (Fast charging), generally confirming to RDSO/PE/SPEC/TL/0091 Rev-2 or latest and USB socket co nfirming to RCF specification EDTS-411 with latest addendum/corrigendum, 3 pin socket confirming to IS 1293 latest & switche s confirming to IS 3854 latest including control switchgear (separate switch gear for Direct light & Indirect light including 50% c ontrols for each light circuit separately), Terminal boards for branching of Lights circuits, crimping lugs, cable markers with hea t shrinkable sleeves for power and control cables, mating connectors, equipment mounting and earthing hardware and accesso ries . (Refer Clause 4.29, of RDSO specification no. RDSO/PE/SPEC/EMU/0196-2025 (Rev.1) with all latest addendum corrigendu m and annexures (IN COACH SETS) [ Warranty Period: 30 Months after the date of delivery ] ] |
| 66 | Installation of cable ducts, trays, conduits, pre-assembled harness duly crimping, dressing, Bunching, termination of cable etc. (as mentioned in SOR item no.28 & 29) in the coach for 02 prototype rakes as per clause 4.41.13 of RDSO specific ation no. RDSO/PE/SPEC/EMU/0196-2025 (Rev.1) with all latest addendum corrigendum and annexures. Supply of one set of Ins tallation Jigs and fixture and its drawings, for each type of coach shall be part of scope of supply. (One set per rake). Note: Eve ry successful bidder to carry out the above activity for 2 prototype rakes. [ Warranty Period: 30 Months after the date of deli very ] ] |
| 67 | Cable Transit System with EPDM type cable gland rubber modules to 4.1.1 (xxxiii) & 4.41.8 of RDSO specification no. RDSO/PE/SPEC/EMU/0196-2025 (Rev.1) with all latest addendum corrigendum and annexures for sealing & shielding includi ng mounting hardware and fixing brackets generally conforming to but not restricted to RDSO specification no. RDSO/2008/EL/ SPEC/0067(latest). Suitable EMC methodology to be adopted (One set per Middle Basic Unit) [ Warranty Period: 30 Months af ter the date of delivery ] ] |
| 68 | Inter-vehicular couplers (Power and control) with coach jumper cable assembly assembled on SS plate including crimping lugs, cable markers with heat shrinkable sleeves, mating connectors, equipment mounting and earthing SS hardware and other associated accessories excluding Train line cables as per clause no. 4.41 of RDSO specification no. RDSO/PE/SPEC/EMU/0196-2025 (Rev.1) with all latest addendum corrigendum and annexures (One set per End Basic Unit). [ W arranty Period: 30 Months after the date of delivery ] ] |
| 69 | Cable Transit System with EPDM type cable gland rubber modules to 4.1.1 (xxxiii) & 4.41.8 of RDSO specification no. RDSO/PE/SPEC/EMU/0196-2025 (Rev.1) with all latest addendum corrigendum and annexures for sealing & shielding includi ng mounting hardware and fixing brackets generally conforming to but not restricted to RDSO specification no. RDSO/2008/EL/ SPEC/0067(latest). Suitable EMC methodology to be adopted (One set per End Basic Unit) [ Warranty Period: 30 Months after the date of delivery ] ] |
| 70 | Inter-vehicular couplers (Power and control) with coach jumper cable assembly assembled on SS plate including crimping lugs, cable markers with heat shrinkable sleeves, mating connectors, equipment mounting and earthing SS hardware and other associated accessories excluding Train line cables as per clause no. 4.41 of RDSO specification no. RDSO/PE/SPEC/EMU/0196-2025 (Rev.1) with all latest addendum corrigendum and annexures (One set per Middle Basic Unit). N OTE: QUANTITY INCLUDES SPARES AS PER SOR ATTACHED WITH TENDER. [ Warranty Period: 30 Months after the date of deli very ] ] |
| 71 | Power, control, Train line , Data / communication cables, fire survival cables in pre-harnessed form (as per claus e 4.41.13) including crimping lugs/Sockets/Wire end ferrules, suitable connectors, cable markers with heat shrinkable sleeves a nd other accessories like flexible conduits, cable jacket,End fittings ,Straight connectors etc. as per clause no. 4.41 and other r elevant clauses of RDSO specification no. RDSO/PE/SPEC/EMU/0196-2025 (Rev.1) with all latest addendum corrigendum and an nexures (The scope of supply does not include IV couplers under clause 4.41.14 (v) of RDSO specification) (One set per Middle Basic Unit). [ Warranty Period: 30 Months after the date of delivery ] ] |
| 72 | Power, control, Train line , Data / communication cables, fire survival cables in pre-harnessed form (as per claus e 4.41.13) including crimping lugs/Sockets/Wire end ferrules , suitable connectors, cable markers with heat shrinkable sleeves and other accessories like flexible conduits ,cable jacket, End fittings ,Straight connectors etc. as per clause no. 4.41 and other relevant clauses of RDSO specification no. RDSO/PE/SPEC/EMU/0196-2025 (Rev.1) with all latest addendum corrigendum and a nnexures (The scope of supply does not include IV couplers under clause 4.41.14 (v) of RDSO specification) (One set per End B asic Unit). [ Warranty Period: 30 Months after the date of delivery ] ] |
| 73 | Lighting system (LED based) including coach lights, (Direct and indirect) along with local control switches at coach level, cabin lights, Headlight, Tail light, Marker lights, Flasher lights, signal exchange light (along with PFC (Potential free contact) to enable LED based Signal Exchange light working status), Disaster Management Light, Emergency alarm indication li ghts, generally confirming to RDSO/PE/SPEC/TL/0091 Rev-2 or latest including control switchgear (separate switch gear for Dire ct light & Indirect light including 50% controls for each light circuit separately), Terminal boards for branching of Lights circuits, crimping lugs, cable markers with heat shrinkable sleeves for power and control cables, mating connectors, equipment mounti ng and earthing hardware and accessories. (Refer Clause 4.29, 4.30, 4.31, 4.32, 4.33 of RDSO specification no. RDSO/PE/SPEC/ EMU/0196-2025 (Rev.1) with all latest addendum corrigendum and annexures (one set per DTC) [ Warranty Period: 30 Mont hs after the date of delivery ] ] |
| 74 | Design and supply of electrical Underframe cable ducts/trays/conduits up to various equipment of the train (Not l imited to SOR items) with mounting & earthing hardware and associated accessories etc for all the rakes as per clause no 4.41. 13 of RDSO specification no. RDSO/PE/SPEC/ EMU/0196-2025 (Rev.1) with all latest addendum corrigendum and annexures (On e set per Basic unit) [ Warranty Period: 30 Months after the date of delivery ] ] |
| 75 | Three-phase fully suspended asynchronous induction motors or Permanent Magnet Synchronous Motor (encapsul ated design of traction motor will also be acceptable) as per clause no. 4.6 of RDSO specification no. RDSO/PE/SPEC/EMU/0196- 2025(Rev.1) with all latest addendum corrigendum and annexure compatible with IGBT/SiC based traction converter power sup ply, with coupling, gear box assembly with all the required fasteners, reaction arm and metal bonded rubber items, required se nsors and associated equipment including crimping lugs, cable markers with heat shrinkable sleeves for power and control cab les, mating connectors, along with all the required hardware, metal bonded rubber items required for fixing traction motor with the bogie frame, equipment mounting and earthing hardware and accessories. (One set consists of 4 Traction Motor assembly) NOTE: QUANTITY INCLUDES SPARES AS PER SOR ATTACHED WITH TENDER. [ Warranty Period: 30 Months after the date of d elivery ] ] |
| 76 | Speed Indicating cum recording equipment as per clause 4.19 of RDSO specification no. RDSO/PE/SPEC/EMU/019 6-2025 (Rev.1) with all latest addendum corrigendum and annexures. (One set per DTC) [ Warranty Period: 30 Months after the date of delivery ] ] |
| 77 | Set of two VCBs and two earthing switches for traction circuit protection and HT cable protection as per clause n o. 4.26.1 and 4.1.1(xxxv) of RDSO specification no. RDSO/PE/SPEC/EMU/0196-2025 (Rev.1) with all latest addendum corrigendu m and annexures (One set per basic unit). NOTE: QUANTITY INCLUDES SPARES AS PER SOR ATTACHED WITH TENDER. [ Warra nty Period: 30 Months after the date of delivery ] ] |
| 78 | Microprocessor based Train Control and Management System (TCMS) as per clause no.4.8 of RDSO specification no. RDSO/PE/SPEC/EMU/0196-2025 (Rev.1) with all latest addendum corrigendum and annexures), with Brake interface unit inc luding fault diagnosis and display system in the driving cab and multiplexing system for relevant control & other signals, remot e diagnostics and tracking system, Wheel slip/slide protection & anti-skid controls (as per clause no. 4.24) including integration of Automatic Door closure system, Brake system and Fire Detection system. (One set per Middle Basic unit) [ Warranty Perio d: 30 Months after the date of delivery ] ] |
| 79 | Microprocessor based Train Control and Management System (TCMS) as per clause no.4.8 of RDSO specification no. RDSO/PE/SPEC/EMU/0196-2025 (Rev.1) with all latest addendum corrigendum and annexures), with Brake interface unit inc luding fault diagnosis and display system in the driving cab and multiplexing system for relevant control & other signals, remot e diagnostics and tracking system, Wheel slip/slide protection & anti-skid controls (as per clause no. 4.24) including integration of Automatic Door closure system, Brake system and Fire Detection system. (One set per End Basic unit) [ Warranty Period: 30 Months after the date of delivery ] ] |
| 80 | Set of Equipment, switch gears for Toilet operation in emergency mode in assembled form including pre-wired p ump control panel assembly, 750 VA INVERTER and its set of contactors as per specification ICF/Elec/175(latest). (VTC compres sor and VTC Pressure switch is not in scope of supply) (One set per coach) [ Warranty Period: 30 Months after the date of del ivery ] ] |
| 81 | Event Recorder as per clause 4.9 including cab Recording Equipment as per clause 4.13 of RDSO specification no . RDSO/PE/SPEC/ EMU/0196-2025 (Rev.1) with all latest addendum corrigendum and annexures (One set per Rake). [ Warrant y Period: 30 Months after the date of delivery ] ] |
| 82 | CCMS (Centralized Coach Monitoring System) as per clause 4.43 of RDSO specification no. RDSO/PE/SPEC/EMU/0 196-2025 (Rev.1) with all latest addendum corrigendum and annexures. (One set per DTC) [ Warranty Period: 30 Months aft er the date of delivery ] ] |
| 83 | Design, development, manufacture, supply, integration, testing and commissioning of IGBT/SiC based 3-phase pr opulsion, control and other equipment for chair car version train sets suitable for operation on 25kv AC OHE system conforming to RDSO specification no. RDSO/PE/SPEC/EMU/0196-2025 (rev.1) along with all latest addendum corrigendum and applicable an nexures (excluding Annexure-XII of RDSO specification No. RDSO/PE/SPEC/EMU/0196-2025 (Rev. 1) wherever applicable as per SOR) but without design and supply of bogie. The firm to provide necessary instrumentation and special tools as per clause no. 1.8.11 of RDSO spec required for commissioning and field-testing of the equipment. Scope of supply also includes training of IR personnel as per clause XXXX of SCC of the bid documents at supplier's premises and at ICF and other railway works for propul sion system. CAMC as per Annexure -8 for items mentioned at GRP-2, PL no. 3176N004 of item details of tender document. Bid ders should factor in the quoted prices of the items of any other equipment on returnable basis, which the bidder feels necessa ry or shall be required during manufacturing, installation, testing/trails of the trainsets but not included in item details of tender document from GRP-2 S.no.1 to 56. Note: 1. The bidders are advised to quote only Rs.1/- against this item for accountal purpos e. 2. Additional information to tender description is at s.no.13 of special conditions of tender document. [ Warranty Period: 3 0 Months after the date of delivery ] ] |
| 84 | Pantograph with mounting insulators, pneumatic control panel, panto isolating cocks including interconnecting b us bars and associated stainless steel mounting hardware, mating connectors - Single pantograph suitable for 25kV AC supply as per clause 4.42 of RDSO specification no. RDSO/PE/SPEC/EMU/0196-2025 (Rev.1) with all latest addendum corrigendum and annexures (Pantograph Set) NOTE: QUANTITY INCLUDES SPARES AS PER SOR ATTACHED WITH TENDER. [ Warranty Period: 3 0 Months after the date of delivery ] ] |
| 85 | Complete air-conditioning system (passenger coaches) as per clause 4.38 of RDSO specification no. RDSO/PE/SP EC/EMU/0196-2025 (Rev.1) with all latest addendum corrigendum and annexures with necessary equipment such as 2 nos. Roof Mounted Package Unit (RMPU), micro-controller, bellows, gaskets and suitable drain arrangement including crimping lugs, cable markers with heat shrinkable sleeves for power and control cables, mating connectors, equipment mounting and earthin g hardware and accessories. (One set per coach) NOTE: QUANTITY INCLUDES SPARES AS PER SOR ATTACHED WITH TENDER. [ Warranty Period: 30 Months after the date of delivery ] ] |
| 86 | Design and supply of electrical Roof cable ducts/trays/flexible conduits up to various equipment of the train (Not Limited to SOR items) with mounting & earthing hardware and associated accessories etc for all the rakes as per clause no.4.4 1.13 of RDSO specification no. RDSO/PE/SPEC/ EMU/0196-2025 (Rev.1) with all latest addendum corrigendum and annexures (O ne set per DTC). [ Warranty Period: 30 Months after the date of delivery ] ] |
| 87 | Design and supply of electrical Roof cable ducts/trays/flexible conduits up to various equipment of the train (Not Limited to SOR items) with mounting & earthing hardware and associated accessories etc for all the rakes as per clause no. 4.4 1.13 of RDSO specification no. RDSO/PE/SPEC/ EMU/0196-2025 (Rev.1) with all latest addendum corrigendum and annexures (O ne set per MC). [ Warranty Period: 30 Months after the date of delivery ] ] |
| 88 | Design and supply of electrical Roof cable ducts/trays/flexible conduits up to various equipment of the train (Not Limited to SOR items) with mounting & earthing hardware and associated accessories etc for all the rakes as per clause no. 4.4 1.13 of RDSO specification no. RDSO/PE/SPEC/ EMU/0196-2025 (Rev.1) with all latest addendum corrigendum and annexures (O ne set per TC). [ Warranty Period: 30 Months after the date of delivery ] ] |
| 89 | Design and supply of electrical Roof cable ducts/trays/flexible conduits up to various equipment of the train (Not Limited to SOR items) with mounting & earthing hardware and associated accessories etc for all the rakes as per clause no.4.4 1.13 of RDSO specification no. RDSO/PE/SPEC/ EMU/0196-2025 (Rev.1) with all latest addendum corrigendum and annexures. ( One set per NDTC). [ Warranty Period: 30 Months after the date of delivery ] ] |
| 90 | Lighting system (LED based) including coach lights, (Direct and indirect) along with local control switches at coach level , cabin lights, and Disaster Management Light, Emergency alarm indication lights, generally confirming to RDSO/PE /SPEC/TL/0091 Rev-2 or latest including control switchgear (separate switch gear for Direct light & Indirect light including 50% controls for each light circuit separately), Terminal boards for branching of Lights circuits, crimping lugs, cable markers with he at shrinkable sleeves for power and control cables, mating connectors, equipment mounting and earthing hardware and access ories . (Refer Clause 4.29, of RDSO specification no. RDSO/PE/SPEC/EMU/0196-2025 (Rev.1) with all latest addendum corrigend um and annexures (one set per MC coach) [ Warranty Period: 30 Months after the date of delivery ] ] |
| 91 | Lighting system (LED based) including coach lights, (Direct and indirect) along with local control switches at coach level , cabin lights, and Disaster Management Light, Emergency alarm indication lights, generally confirming to RDSO/PE /SPEC/TL/0091 Rev-2 or latest including control switchgear (separate switch gear for Direct light & Indirect light including 50% controls for each light circuit separately), Terminal boards for branching of Lights circuits, crimping lugs, cable markers with he at shrinkable sleeves for power and control cables, mating connectors, equipment mounting and earthing hardware and access ories . (Refer Clause 4.29, of RDSO specification no. RDSO/PE/SPEC/EMU/0196-2025 (Rev.1) with all latest addendum corrigend um and annexures (one set per TC coach) [ Warranty Period: 30 Months after the date of delivery ] ] |
| 92 | Lighting system (LED based) including coach lights, (Direct and indirect) along with local control switches at coach level , cabin lights, and Disaster Management Light, Emergency alarm indication lights, generally confirming to RDSO/PE /SPEC/TL/0091 Rev-2 or latest including control switchgear (separate switch gear for Direct light & Indirect light including 50% controls for each light circuit separately), Terminal boards for branching of Lights circuits, crimping lugs, cable markers with he at shrinkable sleeves for power and control cables, mating connectors, equipment mounting and earthing hardware and access ories . (Refer Clause 4.29, of RDSO specification no. RDSO/PE/SPEC/EMU/0196-2025 (Rev.1) with all latest addendum corrigend um and annexures (one set per NDTC coach) [ Warranty Period: 30 Months after the date of delivery ] ] |
| 93 | Automatic smoke, fire detection with alarm system in each coach as per clause 2.9.2 of RDSO specification no. R DSO/PE/SPEC/EMU/0196-2025 (Rev.1) with all latest addendum corrigendum and annexures. (One set per coach) [ Warranty Period: 30 Months after the date of delivery ] ] |
| 94 | Exterior Lighting system (LED based) viz.,, Headlight, Tail light, Marker lights, Flasher lights , signal exchange lig ht etc., as per Clause 4.30, 4.31, 4.32, 4.33 of RDSO specification no. RDSO/PE/SPEC/EMU/0196-2025 (Rev.1) with all latest add endum corrigendum and annexures (IN COACH SETS) [ Warranty Period: 30 Months after the date of delivery ] ] |
| 95 | Supervision of installation as per clause 18.3 & Commissioning as per item No.18.4 of SCC of the bid documents for 16 car rakes. (One set equal to one 16 car rake). [ Warranty Period: 30 Months after the date of delivery ] ] |
| 96 | Set of Metal oxide Gapless lightning arrestors (02 nos.) for 25 KV AC as per clause no. 4.4 of RDSO specification no. RDSO/PE/SPEC/EMU/0196-2025(Rev.1) with all latest addendum corrigendum and annexures (One set per basic unit). NOTE : QUANTITY INCLUDES SPARES AS PER SOR ATTACHED WITH TENDER. [ Warranty Period: 30 Months after the date of deliver y ] ] |
| 97 | Lifting frames and special jigs & fixtures for mounting & dismounting of Main converter and Auxiliary converter [ Warranty Period: 30 Months after the date of delivery ] ] |
| 98 | Complete pre-fabricated driver desk housing all the necessary equipment and driver/ guard seat, Master cum Br ake controller , including crimping lugs, cable markers with heat shrinkable sleeves for power and control cables, mating conn ectors, equipment mounting and earthing hardware and accessories as per clause 4.15 & 4.16 of RDSO specification no. RDSO/ PE/SPEC/EMU/0196-2025 (Rev.1) with all latest addendum corrigendum and annexures Note: 1.Provision of Interface (hardware and Software) for KAVACH (TCAS), Brake equipment and RTIS display shall be in the scope of supply. Pneumatic horns, rolling b lind and Sun visors are excluded. Items separately mentioned in SOR are also excluded from Scope of Driver Desk. 2.Based on the approved layout, a mockup of the complete driver cab shall be made at purchaser premises/ nominated place to finalize th e finer details and freeze the design as per clause 4.16.1(xii). (One set per DTC). [ Warranty Period: 30 Months after the date of delivery ] ] |
| 99 | Electrically operated wiper system with washer tank as per clause no. 4.16.1(iii) of RDSO specification no. RDSO/ PE/ SPEC/EMU/0196-2025 (Rev.1) with all latest addendum corrigendum and annexures.(One set per DTC) NOTE: QUANTITY IN CLUDES SPARES AS PER SOR ATTACHED WITH TENDER. [ Warranty Period: 30 Months after the date of delivery ] ] |
| 100 | Transformer Mounting/dismounting kit (Numbers) [ Warranty Period: 30 Months after the date of delivery ] ] |
| 101 | High reach pantograph as per Clause 4.42.1 of RDSO specification no. RDSO/PE/SPEC/EMU/0196-2025 (Rev.1) wit h all latest addendum corrigendum and annexures with mounting insulators, pneumatic control panel, panto isolating cocks inc luding interconnecting bus bars and associated stainless steel mounting hardware, mating connectors - Single pantograph suit able for 25kV AC supply. (HR Pantograph Set) NOTE: QUANTITY INCLUDES SPARES AS PER SOR ATTACHED WITH TENDER. [ Wa rranty Period: 30 Months after the date of delivery ] ] |
| 102 | Set of Control Equipment such as relays, contactors, circuit breakers and related switchgears etc. for propulsion system, controls and all auxiliaries including RMPU switch gears/panels in the assembled form viz. cubicle or cabinet as per cla use 4.21 of RDSO specification no. RDSO/PE/SPEC/EMU/0196-2025 (Rev.1) with all latest addendum corrigendum and annexure s. The scope also includes electrical switch gears for Mini -Pantry equipment in each coach. (One set per End Basic Unit) [ War ranty Period: 30 Months after the date of delivery ] ] |
| 103 | Voice communication system Passenger information system, Wi-Fi based infotainment system including their int egration, coach displays (both internal and external), front destination board (Head code in DTCs), audio communication syste m, emergency talk back system and interface with the Train Monitoring System (TMS), Passenger Alarm system with Flush mou nted alarm push button with reset key mechanism with poly carbonate enclosure with separate LED indications beside respecti ve push button area, external flush mounted, LED based passenger alarm indicator on each side of the coach and any other eq uipment required for interfacing PIS with the Receiver equipment of TMS as per clause 4.10, 4.11, and 4.20 of RDSO specificati on no. RDSO/PE/SPEC/EMU/0196-2025 (Rev.1) with all latest addendum corrigendum and annexures. (one set per End Basic Un it) NOTE: QUANTITY INCLUDES SPARES AS PER SOR ATTACHED WITH TENDER. [ Warranty Period: 30 Months after the date of delivery ] ] |
| 104 | All special tools, fixtures, gauges etc., for assembly /disassembly with bogie/axle of drive complete (including ge arbox, pinion, gear wheel and components of gear box) and Traction motor. This includes special tools, fixtures, gauges for thei r Overhauling/repairing also. (set) [ Warranty Period: 30 Months after the date of delivery ] ] |
| 105 | Diagnostic Kit consisting of a laptop loaded with requisite life time licensed software and interface hardware for t esting & trouble shooting of propulsion system including power module of main and auxiliary converter-inverter, Traction motor etc (set) [ Warranty Period: 30 Months after the date of delivery ] ] |
| 106 | Passenger car Surveillance System as per clause 4.12 of RDSO specification no. RDSO/PE/SPEC/EMU/0196-2025 ( Rev.1) with all latest addendum corrigendum and annexures. (One set per Middle Basic Unit) NOTE: QUANTITY INCLUDES SPAR ES AS PER SOR ATTACHED WITH TENDER. [ Warranty Period: 30 Months after the date of delivery ] ] |
| 107 | Passenger car Surveillance System as per clause 4.12 of RDSO specification no. RDSO/PE/SPEC/EMU/0196-2025 ( Rev.1) with all latest addendum corrigendum and annexures. (One set per End Basic Unit) NOTE: QUANTITY INCLUDES SPARES AS PER SOR ATTACHED WITH TENDER. [ Warranty Period: 30 Months after the date of delivery ] ] |
| 108 | High Voltage cable running on the roof for feeding adjacent units as per clause no. 4.26.3 (excluding VCB and Ea rthing Switch) and Transformer HT cable with protection shield (as per clause 4.26.2) including isolation & protection system (e lectrical and mechanical), high voltage insulator, inter car jumper cable assembly along with crimping lugs, all mounting &eart hing hardware, mounting brackets and exterior cable protection system throughout the above roof area of RDSO specification no. RDSO/PE/SPEC/EMU/ 0196-2025 (Rev.1) with all latest addendum corrigendum and annexures. (One set per Middle Basic U nit).NOTE: QUANTITY INCLUDES SPARES AS PER SOR ATTACHED WITH TENDER. [ Warranty Period: 30 Months after the date of delivery ] ] |
| 109 | High Voltage cable running on the roof for feeding adjacent units as per clause no. 4.26.3 (excluding VCB and Ea rthing Switch) and Transformer HT cable with protection shield as per clause 4.26.2 including isolation & protection system (ele ctrical and mechanical) including high voltage insulator, inter car jumper cable assembly along with crimping lugs, all mountin g & earthing hardware, mounting brackets and exterior cable protection system throughout the above roof area of RDSO speci fication no. RDSO/PE/SPEC/EMU/ 0196-2025 (Rev.1) with all latest addendum corrigendum and annexures (One set per End Bas ic Unit). [ Warranty Period: 30 Months after the date of delivery ] ] |
| 110 | Set of Control Equipment such as relays, contactors, circuit breakers and related switchgears etc. for propulsion system, controls and all auxiliaries including RMPU switch gears/panels in the assembled form viz. cubicle or cabinet as per cla use 4.21 of RDSO specification no. RDSO/PE/SPEC/EMU/0196-2025 (Rev.1) with all latest addendum corrigendum and annexure s. The scope also includes electrical switch gears for Mini -Pantry equipment in each coach. (One set per Middle Basic Unit) [ W arranty Period: 30 Months after the date of delivery ] ] |
| 111 | Voice communication system Passenger information system, Wi-Fi based infotainment system including their int egration, coach displays (both internal and external), audio communication system, emergency talk back system and interface with the Train Monitoring System (TMS), Passenger Alarm system with Flush mounted alarm push button with reset key mecha nism with poly carbonate enclosure with separate LED indications beside respective push button area, external flush mounted, LED based passenger alarm indicator on each side of the coach and any other equipment required for interfacing PIS with the R eceiver equipment of TMS as per clause 4.10, 4.11, and 4.20 of RDSO specification no. RDSO/PE/SPEC/EMU/0196-2025 (Rev.1) with all latest addendum corrigendum and annexures. (one set per Middle Basic Unit) NOTE: QUANTITY INCLUDES SPARES AS P ER SOR ATTACHED WITH TENDER. [ Warranty Period: 30 Months after the date of delivery ] ] |
| 112 | Load weighing system including redundant weight sensors at bogie level, junction boxes for interfacing cables, m ating connectors, SS hardware, cable markers and crimp contacts. The scope of supply of pressure transducers shall be with S upplier as per clause 4.25 of RDSO specification no. RDSO/PE/SPEC/EMU/0196-2025 (Rev.1) with all latest addendum corrigend um and annexures. (One set per coach). [ Warranty Period: 30 Months after the date of delivery ] ] |
| 113 | CAMC for Train set items covered under PL.nos. 31763224, 31918578, 31761100, 31711777, 31721278, 317212 80, 31903629, 31721308, 31720791, 31711856, 31711728, 31711741, 31713257, 31711832, 31711765, 31761094, 3190439 7, 31720833, 31721266, 31721254, 31918463, 31918554, 31918529, 31918505, 31918475, 31918566 and 31712113 for 05 y ears after completion of warranty period of two years (rate to be quoted year wise) as per the details mentioned in ANNEXURE- 8 of NIT Bid document excluding spare quantity of respective item. (one set per Rake) [ Warranty Period: 2 years, AMC Peri od: 5 years, Rate of Discounting: 10 % ] ] |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 48 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender