Tender For Procurement, Transportation, Installation And Commissioning Of Multilingual Metal/Gi Iec Boards For Solid Waste Management Awareness Under Kswmp, As Per Spmu-Approved Design At Designated Locations In Chalakudy Municipality

Sharing tender

Tender for Procurement, Transportation, Installation And Commissioning Of Multilingual Metal/Gi Iec Boards For Solid Waste Management Awareness Under Kswmp, As Per Spmu-Approved Design At Designated Locations In Chalakudy Municipality , Supply, Fabrication, Transportation, Installation And Commissioning Of Iec Boards With Multiple Languages As Approved By Spmu - Kswmp At Designated Locations Within Chalakudy Municipality, Thrissur District, Kerala , Board Of Size 4 Ft × 3 Ft, Using Gi Pipes For Fixing And Framework With Cement Concrete (1:2:4) For Securing The Board To The Ground. Display Board Sheet - Gi Sheet / Metal Sheet (Minimum 1.0 Mm Thickness,Rust-Resistant) ,Frame Section - Ms Hollow Rectangular Tube - 20 Mm × 20 Mm × 1.2 Mm,Printing Material - High Performance Vinyl (Minimum 100-120 Microns Thickness), Lamination Gloss/Matte Lamination - Anti-Fade, Anti-Scratch, Painting On Frame & Backside- Epoxy Paint (1 Coat Primer + 2 Topcoats), Fixing Hardware- Ss/Gi Anchor Bolts, Nuts, Washers As Required For Site,Height (If Free-Standing) -1.2 M Minimum From Ground To Bottom Edge,Backside Surface Protection- Anti-Corrosive Epoxy / Aluminium Coating,Edges & Corners- Smooth Finish, No Sharp Edges, Warranty- Minimum 1 Year Against Fading / Rusting / Peeling. , Board Of Size 3 Ft × 2 Ft, Using Gi Pipes For Fixing And Framework With Cement Concrete (1:2:4) For Securing The Board To The Ground. Display Board Sheet - Gi Sheet / Metal Sheet (Minimum 1.0 Mm Thickness,Rust-Resistant) ,Frame Section - Ms Hollow Rectangular Tube - 20 Mm × 20 Mm × 1.2 Mm,Printing Material - High Performance Vinyl (Minimum 100-120 Microns Thickness), Lamination Gloss/Matte Lamination - Anti-Fade, Anti-Scratch, Painting On Frame & Backside- Epoxy Paint (1 Coat Primer + 2 Topcoats), Fixing Hardware- Ss/Gi Anchor Bolts, Nuts, Washers As Required For Site,Height (If Free-Standing) -1.2 M Minimum From Ground To Bottom Edge,Backside Surface Protection- Anti-Corrosive Epoxy / Aluminium Coating,Edges & Corners- Smooth Finish, No Sharp Edges, Warranty- Minimum 1 Year Against Fading / Rusting / Peeling.