Tender For Stmc-For 2 Nos Of Roads For A Length Of 21.000 Km Under Nabarangpur R And B Division(Package 2)
Tender Value
1.04 Crore
Estimated cost
Bid Submission
15 Oct 2026
7 days left
EMD
1.04 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nabarangpur → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Stmc-For 2 Nos Of Roads For A Length Of 21.000 Km Under Nabarangpur R And B Division(Package 2)
BOQ
| Sl. No. | Item Description |
| 1 | Restoration of rain cuts with soil, moorum, gravel or a mixture of these, clearing the loose soil, benching for 300 mm width, laying fresh material in layers not exceeding 250 mm and compacting with plate compactor or power rammers to restore the original alignment, levels and slopes as per MORT&H specification cluse no 3002 and as per direction of the Engineer-in-chargeDhodra Singsari Road From km.0/00 km to10/00 km |
| 2 | Singsari to Kondagam Road via Silati From km.0/00 km to11/00 km |
| 3 | Removal of rank vegetation/weeds and undesirable vegetation from shoulders,embankment slopes up to ROW(bothsides) complete in all respects including breaking of clods,rough dressing and disposal of waste material and vegetation at a place outside ROW as per direction of Engineer-In-Charge and as per maintenance standards Clause no 3.1.(Frequency of cleaning will be one time in a quarter)a) Shoulders including side slopes of embankment upto toe line both sides of the carriageway.(Frequency of cleaning will be four times in a year, however limited to only areas prone to growth of rank/undesirable vegetation and weeds)Dhodra Singsari Road From km.0/00 km to10/00 km |
| 4 | Singsari to Kondagam Road via Silati From km.0/00 km to11/00 km |
| 5 | Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per Clause 406 of MoSRT&H Specifications for Road & Bridge works.(Latest Revision)Dhodra Singsari Road From km.0/00 km to10/00 km |
| 6 | Singsari to Kondagam Road via Silati From km.0/00 km to11/00 km |
| 7 | Providing and Applying Primer Coat with bitumen emulsion on prepared surface of granular base including cleaning the road surface and spreading primer @ 0.60kg per sqm using mechanical means as per Technical Specifications and as per Clause 502 of MoSRT&H Specifications for Road & Bridge works (Latest Revision).Dhodra Singsari Road From km.0/00 km to10/00 km |
| 8 | Singsari to Kondagam Road via Silati From km.0/00 km to11/00 km |
| 9 | Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom.Dhodra Singsari Road From km.0/00 km to10/00 km |
| 10 | Singsari to Kondagam Road via Silati From km.0/00 km to11/00 km |
| 11 | Providing 50mm thick Bituminous Macadam using crushed stone Gr.-2 materials & 60 / 70 penetration grade of bitumen as per approved Drawing & Technical Specifications and as per Clause -504 of MoSRT&H Specifications for Road & Bridge works (Latest Revision).Dhodra Singsari Road From km.0/00 km to10/00 km |
| 12 | Singsari to Kondagam Road via Silati From km.0/00 km to11/00 km |
| 13 | Providing 25mm thick S.D.B.C. using crushed stone Gr.-2 materials & 60 / 70 penetration grade of bitumen as per approved Drawing & Technical Specifications and as per Clause -508 of MoSRT&H Specifications for Road & Bridge works (Latest Revision).Dhodra Singsari Road From km.0/00 km to10/00 km |
| 14 | Singsari to Kondagam Road via Silati From km.0/00 km to11/00 km |
| 15 | Providing compacted granular materials in shoulder by using moorum having required P.I. value with sand admixture if required as per approved Drawing & Technical Specifications and as per Clause - 407 of MoSRT&H Specifications for Road & Bridge works (Latest Revision).Dhodra Singsari Road From km.0/00 km to10/00 km |
| 16 | Singsari to Kondagam Road via Silati From km.0/00 km to11/00 km |
| 17 | Stripping excess soil from the shoulder surface to achieve the approved level and compacting with plate compactor etc complete.Singsari to Kondagam Road via Silati From km.0/00 km to11/00 km |
| 18 | Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.Dhodra Singsari Road From km.0/00 km to10/00 km |
| 19 | Singsari to Kondagam Road via Silati From km.0/00 km to11/00 km |
| 20 | Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of class-B Type IV retro reflective sheeting fixed cover 2 mm thick aluminium sheeting vide clause 801.3, 3mm/4mm thick aluminium composite material sheet depending on the size of the sign fixed over back support frame of min 25 x 25 x 3 mm Angle mounted on a mild steel circular pipe 65 NB, 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The sign shall be maintained as per section 12 of IRC 67.Dhodra Singsari Road From km.0/00 km to10/00 km90 cm equilateral triangle |
| 21 | 90 cm circular |
| 22 | 80cmx60cm Rectangular |
| 23 | 90 cm high octagon |
| 24 | Singsari to Kondagam Road via Silati From km.0/00 km to11/00 km90 cm equilateral triangle |
| 25 | 90 cm circular |
| 26 | 80cmx60cm Rectangular |
| 27 | 90 cm high octagon |
| 28 | Providing and fixing of bi-directional retro reflective raised pavement markers of approved colour, quality & make conforming to ASTM D-4280 made from injection moulded high impact polymer including cleaning, preparation of surface and fixing at position with approved quality adhesives including cost of all materials, labour, transportation, taxes, duties, sundries, T&P etc. complete and as per Clause 804 of MoRT&H specification for road & bridge works (5th Revision) and as per direction of Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysOct 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender