Tender For Internal Electrification For Newly Constructed Cloak Room At Digha Under Wb Hidco.
Tender Value
1.86 Lakhs
Estimated cost
Bid Submission
12 Oct 2026
7 days left
EMD
3735
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Medinipur East → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Internal Electrification For Newly Constructed Cloak Room At Digha Under Wb Hidco.
BOQ
| Sl. No. | Item Description |
| 1 | Supply & Fixing 250 V, 2+10 way SPN MCBDB With IP-42/43 protection with 01 nso. 32 Amp Isolator as Incomer and 10 nos. 6-25 Amp SP MCBs (\\"C\\" Curve, 10 KA) as outgoing, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter Connection with suitable size of copper wire and neutral link & provision for earthing attachment. (Make - Crabtree / L&T / Siemens / ABB-Elegance Series) |
| 2 | Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 25mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required. (ii) 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC. |
| 3 | Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate and 2 no. suitable size “Ph & N” copper bar & earthing attachment fixed on wall incl. mending good damages to original finish. (C) Average run 8 mtr |
| 4 | Supply & Fixing 240 V, 01 nos. 16 A, 3 pin Modular type plug socket with 01 nos. 16A Modular type switch (Brand approved by EIC), and 01 nos. 1 Module Blank Plate 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. (Make - Crabtree / L&T / Siemens / ABB-Elegance Series) |
| 5 | Supply & Fixing 240 V, 06 nos. 6 A Switch, with 02 nos. 1 Module Fan Regulator incl, 8 Module GI Modular type switch board with 8 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. (Make - Crabtree / L&T / Siemens / ABB-Elegance Series) |
| 6 | Supply & Fixing 240 V, 05 nos. 6 A Switch, with 02 nos. 1 Module Fan Regulator and 01 nos. 1 Module Blank Plate incl, 8 Module GI Modular type switch board with 8 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. (Make - Crabtree / L&T / Siemens / ABB-Elegance Series) |
| 7 | Supply & Fixing 240 V, 04 nos. 6 A Switch, with 01 nos. 6 Amp 3 Pin Socket type 6 Module switch board with 6 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. (Make - Crabtree / L&T / Siemens / ABB-Elegance Series) |
| 8 | Supply & delivery 1.1 KV grade XLPE insulated stranded Aluminium Armoured conductor galvanised steel armoured cable of the following sizes. (Make : Havells / Polycab / Gloster). 2 core X 10 sq. mm. |
| 9 | Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, / 40 mm dia HDPE Pipe including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed. 2 core X 10 sq. mm. |
| 10 | Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting |
| 11 | Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : 2 core X 10 sq. mm. |
| 12 | Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : 2 core X 10 sq. mm. |
| 13 | Finishing of the PVC insulated wire ends by socketting with pin / ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. (I) 2.5 sq.mm to 1.5 sq.mm. |
| 14 | Supply & Delivery Single LED Fittings With LED tube (Make : Wipro / Jaquar / Klite) incl. 1x MAS LED (PC body) tube 1200mm 18W865 T8 I--2100lm. As per choice of EIC. |
| 15 | Fixing only fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports incl. S&F EI conduit, ball socket/socket type ceiling plate and connecting the length of PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm) flexible copper wire of 1.10 mt. length. |
| 16 | Supply and fixing 1200 mm sweep 230 volt A C Ceiling fan (make-Usha) inclu. Blades, canopy etc. With 18\\" down rod(14SWG), Fork (10SWG), Heavy type insulator, 3/8th inch bolt with nut, heavy type split pin etc. |
| 17 | Supplying & Fixing MS fan clam of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting – (As per Drawing no. 475 of PWD Specification Book – May 1991) |
| 18 | Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below : By ISI-Medium GI pipe |
| 19 | Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages. No. 10 SWG |
| 20 | Add GST @18% and Cess @1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysOct 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender