Tender For Provn Of Catle Fencing For Runway And Maneuvering Area At Af Stn Thoise
Tender Value
4.34 Crore
Estimated cost
Bid Submission
30 Oct 2026
22 days left
EMD
5.09 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Leh → Ladakh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Catle Fencing For Runway And Maneuvering Area At Af Stn Thoise
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in hard and dense soil complete all as specified and directed. |
| 2 | Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard /dense soil complete all as specified and as directed. |
| 3 | Excavation in post holes (or similar holes) Each not exceeding 0.5 Cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layer not exceeding 25cm watering and removing surplus soil to a distance not exceeding 50M and making good in hard/dense soil complete all as specified and as directed |
| 4 | M&L for cement concrete 1:4:8 type D-2 (using 40 mm graded stone agg) as in foundation filling and mass concrete complete all as specified and directed. |
| 5 | M&L for cement concrete 1:3:6 type C-1 (using 420 mm graded mechanically crushed stone agg) as in foundation filling and mass concrete complete all as specified and directed. |
| 6 | M&L for cement concrete 1:2:4 type B-1 (using 420 mm graded mechanically crushed stone agg) as in foundation filling and mass concrete complete all as specified and directed. |
| 7 | S&F mild steel works as in posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 8 | S&F mild steel flat iron support or stays for fixing chain link fencing confirming to conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 9 | S&F Mild steel screw bolts (machine made) dia of neck 11 to 15 mm) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5 cm and n exc 10 cm long complete all as specified and directed. |
| 10 | S&F Mild steel screw bolts (machine made) dia of neck 16 to 20 mm) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 10 cm and n exc 20 cm long complete all as specified and directed. |
| 11 | S&F mild steel round bars 8 mm dia and over cut to lengthbent to shape required and all as specified confirming to Fe 410-W ( Gde E-250) quality -A or Fe 290 ( Gde E-165) for securing chain link fencing complete all as specified and directed. |
| 12 | Supply only Chain link MS galvanisd fencing, aof size ( 75 mmx75mm) and dia of wire 4 mm complete all as specified and directed |
| 13 | Fixing only chain link fencing including line wires, any mesh, size and type to any typeof standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed |
| 14 | M&L for mild steel reinforcement TMT bar 10mm dia and over cut to length, bent to shape as required including crancking , bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire ( annealed) not.less than 0.9 mm dia or securing with clips complete all as specified and as directed. |
| 15 | M&L for mild steel reinforcement TMT bar 5mm dia and over upto and including 10 mm dia as in stirrups , cut to length, bent to shape as required including crancking , bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire ( annealed) not.less than 0.9 mm dia or securing with clips complete all as specified and as directed. |
| 16 | M&L for M-30 Design Mix using 20 mm graded crushed stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed. |
| 17 | M&L for M-30 Design Mix using 20 mm graded crushed stone aggregate as in columns,pillars,piers, posts and struts complete all as specified and as directed. |
| 18 | M&L for form work to sides of concrete foundations, footing, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for flat rough finished surface of concrete complete all as specifiedand directed . |
| 19 | M&L for form work to sides of pillar,posts for fair finished flat surfaces of concrete complete all as specifiedand directed . |
| 20 | M&L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth (without using extra cement ) complete all as specified and directed . |
| 21 | M&L for preparing new plastered surfaces of walls and applying two coats of cement based paint on external surfaces complete all as specified and directed. |
| 22 | S&F mild steel in Joist, channel, angle, or tee sections,fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) of Fe -410 W Gde E-250 Quality A complete all as specified and as directed |
| 23 | M&L for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to beprepared for hanging or sliding with and including either hooks and hinges or steel hangingdoor fittings (exclusive of steel sheeting or other covering, running rails and guides) andhanging; also fastening and fixing Fe-410 W Gde E-250 Quality B complete complete all as specified & directed . |
| 24 | M&L for mild steel Rolled sections as in main and cross beams, hip and jack rafters;purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe -410 W Gde E-250 Quality A complete all as specified & directed by Engineer-in-Charge. |
| 25 | M&L for 1.00 mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws,clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified & directed . |
| 26 | M&L for two coat of synthetic enamel paint over a coat of red oxide/ zinc chrome primer on new steel surfaces of any description over 10 cm width or girth including preparation of new steel surfaces complete all as specified and directed. |
| 27 | Returning, filling in, including spreading, levelling,watering and well ramming in layers not exceeding 25 cm as in hard/dense soil complete all as specified and directed. |
| 28 | Removal of surplus soil upto a distance of 50 m and depositing where directed at a level not exceeding 1.5 metre above the starting point, complete all as specified and directed. |
| 29 | S&F 2 inch Groove wheel heavy duty rigid caster with bracket for inverted track, rolling gate, sliding gate , industrial machine,wire rope rail, loading capacity 660 lbs of following size/specification complete all as specified and directed by Engr-in Charge.Size: wheel diameter 2 inch/49 mm , wheel width: 1.14 inch/29 mm , groove depth: 0.4 inch/10 mm, overall height is 2.5 inch/63 mm from the top of wheel to the bottom of plate, mount hole diameter ; 1/4 inch( need 1/4 inch mounting bolts or weld) |
| 30 | S&F large size asjustable guide roller bracket with double ball bearing Nylon wheel for heavy industrial sliding gates complete all as specified and directed. Make Monarch or its equivalent |
| 31 | M&L for brick work with Sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed . |
| 32 | M&L for three coat of white wash to new plastered surfaces of wall including preparation of new surfaces complete all as specified and directed. |
| 33 | M&L for 300mm dia bore reinforced concrete pipes, class NP-2 laid and jointed complete with collars all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 22 daysNov 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 29 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender