Tender For special Repairs Of T-37 (Single Nursing Offrs Accn) At Mh Namkum Under Ge Ranchi
Tender Value
28.80 Lakhs
Estimated cost
Bid Submission
22 Oct 2026
19 days left
EMD
57600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ranchi → Jharkhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repairs Of T-37 (Single Nursing Offrs Accn) At Mh Namkum Under Ge Ranchi
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling AC/ CGI/ translucent ( corrugated, semicorrugated,etc), as in roof covering complete. |
| 2 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.53mm thick AZ-150 GSM coating (super durable polyster coating) of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, Chhaja etc fixed with self tapping screws as specified. |
| 3 | S&F Pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in Ridge,velly gutter etc with self tapping screws or J hooks as specified. |
| 4 | Dismantling timber scantling 40 sq cm and over in framed work section complete all as spd and directed. |
| 5 | M&L roof trusses (framed ), trussed, purlins, rails & fastening and heavy bracket framing (beam, tee, angle, channel, flat, etc) incl distance pieces, cleats , holdfast etc complete all as spd & directed. |
| 6 | M & L preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete. |
| 7 | Dismantling of wall/ceiling boards (fibre, pulp, insulation, etc) of any type including cover fillets. |
| 8 | M&L for providing aluminium snap Grid frame work for false ceiling with of size 605X605 mm ,using Main and cross tee of size 36.5mmX25mmX1.4mm,weighing 0.24 kg/RM and 23.5mmX26.4mmX1.4mm weighing 0.191Kg/RM respectively. the snap grid shall be supported at end all along the wall with aluminium anodised angle of size 40mmX25mmX2mm weighing 0.36Kg/RM. The snap grid shall be fixed to ceiling supporting hangers consisting of 2mm dia MS wire/GI wire, J bolts, nuts and washers as per manufacturer's complete all as specified. |
| 9 | M&L 4mm thick non asbestos fibre designer cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws. |
| 10 | Taking down chowkats or frame with shutters (without taking off shutters from the frames) n. Exc 1.5 Sqm each |
| 11 | Description all as per above ser item No 10 item but exc1.5 Sqm but n.exc. 4 Sqm. |
| 12 | S & F factory made single extruded WPC (Wood polymer composite) solid door/window/ceosetory windows & other frames/chowkhats of size 50 x 100 mm comprising of virgin PVC ploymer of K value 58-60 (suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strenght of 2200 N (Face) & 1100N (Edge), minimum compressive strength of 58N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixede in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-charge. (M.S. hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerence in dimension i.e. depth and width of profile shall be acceptable. variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 13 | S&F factory made solid PVC Moulded door shutter(with particle board core), 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on front face and 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing . |
| 14 | M&L Pressed steel frames of section 105 x 60 mm for doors with one or more rebates including supply and fixing lugs, hinges, lock strick plate etc complete all as specified. |
| 15 | M&L Pressed steel frames of section 125 x 60 mm for doors with one or more rebates including supply and fixing lugs, hinges, lock strick plate etc complete all as specified. |
| 16 | Supply & fix second class hard wood 35m thick glazed and skeleton factory made shutter for door open rebated and prepared to receive glass gauge etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass/gauze etc, size members of shutters as specified in SSR Part-I Sec 8, Clause 8.24 (a) complete all as specified and directed . |
| 17 | Supply & fix 30mm thick flush shutter, solid core construction, with block board core and plywood face panels with decorative face vaneer with lipping/frame to match on both side complete all as specified and directed. |
| 18 | S&F in repair block boards 18/19mm thick gde 2 quality, interior grade, decorative type with decorative face vaneer on both face type for cupboard shutter, shelf, etc complete |
| 19 | S & F Aluminium anodised barrel tower bolts of extruded section and fixed 200 mm long. |
| 20 | S & F Aluminium anodised handles of extruded section and fixed 125 mm long. |
| 21 | S & F 100 mm size Butt hinges medium weight cold rolled mild steel and fixed. |
| 22 | Supply & fix 250 mm long Aluminium alloy, Sliding door bolts, with hasp, staple and fixing clips of sheet, cast or extruded section and fixing bolts of extruded section or cast aluminium alloy complete all as specified & directed. |
| 23 | S&F Floor door stopper of aluminium alloy body and tongue, anodised,with hard drawn steel spring,overall length of cover plate 150mm fixed in floor all as spd and directed |
| 24 | M&L for Door seal of size 18 mm x 6 mm suitable for filling gap below the door made from self adhesive rubber complete all as specified and directed. |
| 25 | Supply & fixing Mild steel helical door spring 300mm with roller and roller plate fixed with screws or welded to frame complete all as specified. |
| 26 | S&F Brass 4 lever Locks, cupboard,grade I, size 65mm complete all as spd and directed. |
| 27 | M&L Powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc.including (Minnimum thickness of powder coating 50 Micron) complete all as specified. |
| 28 | M&L Powder Coated Three track aluminium window fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws etc .including (powder coating not less than 50 micron) complete all as specified.. complete all as specified. |
| 29 | M&L Powder coating aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, Powder Coated aluminium snap beading, screws etc .including (powder coating not less than 50 micron) complete all as specified.. complete all as specified. |
| 30 | S&F 4.0 mm thick plain Sheet glass, area exc 0.5 sqm in each pane and fixed to aluminium frame work etc complete. |
| 31 | S&F 4.00 mm thick Figured glass,pin head type , area n exc 0.5 sqm in each pane and fixed to aluminium frame work complete. |
| 32 | Supply & fix stainless stteel alloy wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with aluminium wire staples complete all as specified and directed . |
| 33 | Supply & fix mild steel framed work such as grills, grating etc with end of bars shouldered and/ or riveted forged into spikes, framed guard bars, railings and similar work complete conforming to Fe-410-0 or Fe-310-0. |
| 34 | Demolition of brick work build in cement mortar including all quoins, arches, pillars, complete. |
| 35 | M&L brick work with sub class 'B' brick straight or curved on plan exc 6m means radius build in cement mortar 1:6 complete all as spd and directed. |
| 36 | M&L brick work with sub class 'B' brick straight or curved on plan exc 6m means radius build in half brick thick built in cement mortar 1:6 complete all as spd and direceted. |
| 37 | Taking down cement plaster any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc |
| 38 | M & L rendering 15 mm thick in cement mortar 1:4 on wall/chajjas/lintel etc and finished even and fair without using extra cement in patches. |
| 39 | M & L rendering 15 mm thick in CM 1:6 in on surface of walls and finished even and fair (without using extra cement) in patches. |
| 40 | Materials & labour preparation of newly plastered surface and finishing the walls surface with Acrylic Smooth exterior paint of required shade : (Two coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 41 | Materials & labour for prepration of newely plastered surface and finishing the surfaces of wall with 2mm thick wall putty and applying two coat distempering with 1st quality acrylic distemper(ready mixed) having VOC content less than50gms/liters,of approved manufaccturer,of required shadeand colour complete,as per manufacturer specification |
| 42 | Materials & labour complete removal of existing treatment finishing the surfaces of wall with 2mm thick wall putty and applying 2 coat distempering with 1st quality acrylic distemper(ready mixed) having VOC content less than50gms/liters,of approved manufaccturer,of required shadeand colour complete,as per manufacturer specification |
| 43 | Materials & labour complete removal of existing treatment finishing the walls surface with Acrylic Smooth exterior paint of required shade : (Two coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 44 | Demolition of (unreinforced)Cement concrete in ground floor and paving n exc 15cm thickness(below and above ground level)all as spd and directed |
| 45 | M & L for 75 mm thick PCC 1:3:6 type C-2 using 20mm graded stone aggregate including finished surface even & fair without using extra cement as in plinth protection including necessary form work of edge all as specified and directed. Note: 10mm wide and 75mm deep joints shall be made at 3 mtr intervel and at each corner and the same shall be filled with using bitumen 85/25 and sand in the ratio 1:3. |
| 46 | M&L Cement concrete 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in levelling course, coping, window cill etc complete. |
| 47 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete. |
| 48 | M&L vitrified coloured ceramic tiles 10 mm thick (square or rectangular) polished, area of each tiles not exceeding 0.36sqm, in floors etc over and including 15mm thick screed bed in CM 1:4 set and jointed in neat cement slurry and pointed in white or colored cement to match complete. |
| 49 | Description all as per above ser item No 48 but as in Skirting with 10mm thick rendering in CM 1:3 |
| 50 | M&L for joint free non skid coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc over & including 15mm thick screed bed in CM 1:4, set & jointed in neat cement slurry and pointed with white or coloured cement to match complete |
| 51 | M&L coloured ceramic glazed tiles 375x250x7mm/ 450x300x7mm thick as in dado/skirting etc including 10 mm thick rendering in CM 1:3, set & jointed in neat cement slurry & pointed in white or coloured cement slurry & pointed in white or coloured cement. |
| 52 | Demolition of cement concrete reinforced as in chullah hoods , shelves, cover slab,Lintel and plate form etc complete all as specified and directed |
| 53 | M&L for RCC as in kitchen platform, shelves, cover slab,Lintel type BO 1:2:4 (12.5 mm graded aggregate) including necessary form work complete all as specified |
| 54 | S&F mild steel TMT bars 8 to 10mm dia and over cut to length bend to shape required including cranking bending spirally for hooping for columns, hooking and binding with and including mils steel wire (annealed) not less than 0.9 mm dia quality conforming to Fe-410-S or F-410-0 etc all as spd. |
| 55 | M&L 20mm thick Granite(of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in CM(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of pigment |
| 56 | S&F in repair bib tap 15mm chromium plated fancy type long shank with crutch butterfly handle, screw down screwed for iron pipe or for brass ferrule etc complete all as specified and directed . |
| 57 | S&F in repair stop valve 15mm chromium plated screw down, high pressure with crutch or butterfly handle, screwed fboth ends for or iron pipe or for unions and fixed complete all as specified and directed |
| 58 | Description all as per above ser item No 57 but as Two way angle cock all as spd and direcetd |
| 59 | S&F in repairs15mm dia pillar tap cost copper alloy fancy type with capstan heads chromium plated screwed down high pressure with or without letered \\"Hot or Cold\\" high pressure with long screwed shanks & fly nuts screwed for iron pipe etc complete all as specified and directed |
| 60 | Supply & fix in repair wall mixer brass chromium plated for mixing hot and cold water screwed for iron pipe suitable for 15mm bore pipes complete all as specified and directed. |
| 61 | S&F in repair Brass chromium plated shower rose 125mm size fancy type with or without swelves joint fixed to iron pipe etc complete all as directed and spd. |
| 62 | S&F in repairs looking mirror selected quality 5mm thick glass mounted on 6mm ply wood & fixed with brass screw & cup washer |
| 63 | S&F in repair Vitreous Rimless Single piece Water closet with PP soft close slim seat cover with dual flushing cistern fitting Including P or S Traps all as directed and specified. |
| 64 | S&F in repairs Health faucet(ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connections and fixed in position complete in complete all as specified & directed. |
| 65 | S&F in repair vitreous china wash hand basin, white, flat back, size 550x400 mm incl chain and plug and porcelain stopper, brackets, waste pipe incl cutting for and pinning in ends of brackets or erecting stand including dismantling |
| 66 | S&F in repair PVC connection 450mm long with two PTMT nuts (Prayag) |
| 67 | S&F in repair CP brass towel rail, 20mm dia, D type,60cm long complete all as approved and directed by the EIC |
| 68 | Supply and fix sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromiun plated bracket guard and railing 60 cm long |
| 69 | S&F of white/colour PVC Cabinet Mirror of Size 350 mm X450 mm of approved make complete all as specified and directed. |
| 70 | S&F in repair,Toilet paper holder of with flat recessed type stainless steel fixed to walls with chromium plated(CP) brass screws complete all as specified and directed |
| 71 | M&L 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete. |
| 72 | S/F in repair PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joint laid in trenches complete. |
| 73 | S/F in repair PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joint laid in trenches complete. |
| 74 | S/F in repair PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joint fixed to wall complete. |
| 75 | S&F PVC (SWR) vent cowl 110mm bore |
| 76 | S&F grating doom 100mm dia of steel (Minimum weight 25gms). |
| 77 | Taking up or steel tubing & connections including cleaning for refixing bore of pipe 15mm etc complete all as specified and directed |
| 78 | S &F of 20mm Outer Dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in Wall/trenches or laying in floors(including all fittings) complete all as specified. |
| 79 | Taking up or steel tubing & connections including cleaning for refixing bore of pipe 20mm etc complete all as specified and directed |
| 80 | Supplying and laying of CPVC pipes 25 mm dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors(including all necessary fittings) complete all as specified. |
| 81 | S&F in repair for 20/25mm Stop valve of PTMT any colour high pressure screwed for Upvc pipe and fixed comlete all as specified and directed . |
| 82 | S&F in repair 1000 Ltrs capacity rotational moulded polythene water storage tanks in two layer cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I |
| 83 | S&F PVC ball valve 25mm diahigh pressure PTMT with epoxy coateed aluminium rod and high density ball (minium 25mm weight 455 gms) complete all as spd and directed. |
| 84 | S&F in repair MS conduit curtain rod with PVC coating fancy type drafry rod 20mm dia of any colour as approved design and fixed to wall complete all as specified and directed. |
| 85 | S&F fancy type sofia brakcet for the curtain rod (suitable for 20mm dia curtain rod) of any approved colour and design all as spd and directed. |
| 86 | Taking down copper /aluminium point wiring (light, fan, bell,socket or power) complete including fixture and fittings such as switches , ceiling roses , pendent , regulators, sockets, light fitting etc. Removing materials to store for taking credit and making good distrubed surfaces of walls, floors etc complete all as specified and directed at site. |
| 87 | Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface complete all as specified and directed. |
| 88 | Taking down exisiting ceiling fan/Exhaust fan from any height, opening and dismantiling for greasing and painting of fans complete with synthetic enamel paint by spraying including filling cavaties with filler one coat after cleaning all dust writing MES No with black paint etc and hanging of fans at same location including clamp with nut/bolt and rubber bush of any make connectting up including provision of cable from ceiling rose to fan complete all as specified and directed by Engr-in-Charge. |
| 89 | M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed for the following :- (Note: Rate of modular cover plates are deemed to be included in the rate quoted) |
| 90 | (a) One light point controlled by one, one way switch 5 Amps |
| 91 | (b) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator |
| 92 | (d ) One Bell point controlled by one , One way switch 5 Amps |
| 93 | (c) One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board. |
| 94 | (e) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad. |
| 95 | Description all as per above ser item No 89 here in before but using 2.5 sq mm single core copper conductor cable FRLSH of multistranded PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm FRLSH copper conductor cable PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly. |
| 96 | S & F for Ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fitting complete all as specified |
| 97 | S & F for Modular Bell Push, one way, and 5/6 Amp single module complete all as specified. |
| 98 | S & F for Modular Switch, one way, and 5/6 Amp single module complete all as specified. |
| 99 | S & F for Modular Switch, one way, and 15/16 Amp single module complete all as specified. |
| 100 | S & F for Modular Socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module complete all as specified. |
| 101 | S & F for Modular Socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module complete all as specified. |
| 102 | S & F for modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed. |
| 103 | S & F for sheet metal enclosure MCB DB VTPN 04 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. |
| 104 | S & F for MCB Triple pole and neutral rated capacity 40 to 100 Amps, 415 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed. |
| 105 | S & F for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts Single door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. |
| 106 | S & F for MCB Single pole pole and neutral rated capacity 40 to 63 Amps, 415 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed. |
| 107 | S & F for MCB Single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed. |
| 108 | S & F for LED mirror light 9/10 watts batten aluminium extruded with decorative end caps complete all as specified and as directed. Make-Havells, Phillips, Wipro. |
| 109 | S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holderconnecting up with three core flexible copper conductor cable of suitable size.ake :- Make Bajaj Philips, Havells. |
| 110 | S & F of wall mounted LED tube light fitting 40 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make :- Make Bajaj Philips, Havells. |
| 111 | S & F of wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make :- Make Bajaj Philips, Havells. |
| 112 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 150 mm and with opening of hole in wall for fixing of fans in suitable shape & size complete all as Specified and direcetd. |
| 113 | M&L for Sub main wiring with approved colour as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 sqmm nominal area and drawing into suitable size of PVC non metalic rigid heavy duty PVC conduit of white/ivory colour and its accssaries ISI marked heavy duty of suitable size including concealed in wall etc one runs of PVC insulated with 6 sqmm (nominal aea) stranded copper conductor FRLS cable as earth wire including taking down old unsv submain wiring complete all as pecified and as directed. Noted: Two runs of 06 sqmm cable, one runs of 6 sqmm cable and one run of PVC conduit willl be measured as one unit. |
| 114 | M&L for XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core laying in trenches/cable duct, fixed to wall/pole complete all as specified and as directed. Note: Exacavation & Earth work, sand, bricks for cable protection shall be measured & paid separatly. |
| 115 | Excavation in trenches n. exc 1.5 m wide & n. exc 1.5 m in depth for laying under ground cables/erection of pole and getting out in hard/dense soil, complete all as specified. |
| 116 | Returning, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick complete all as specified. |
| 117 | Removal of excavated surplus material (Soil) to a distance n.exc 50 mtr and depositing where directed at a level n.exc 1.5mtr above the starting point complete all as specified. |
| 118 | M&L for Sand filling in cable trenches for cable protection with clean dry sand unwashed including gently put in trences. |
| 119 | S&F for old size brick well burnt, laid flat, for cable protection complete all specified and directed. |
| 120 | M& L for GI tubing light of size 40 mm dia fixed on walls / laid in trenches as protection pipe for under ground cable including provisioning of specials and clamps etc including taking down of old unseviceable pipe any type and any size complete all as speified and directed.Note - Excavation/PCC cutting to be paid separately in respective items. |
| 121 | Supply & fix in replacement for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6.0 mm thick buried directly in ground (earth pit not less than 2.25 mtr below normal ground level) with top edge plate not less than 1.5 metre below normal ground level connected to galvanized earth strip of size 25 x 4 mm as earthing lead by means of bolts, nuts, chuck nuts and washers of galvanized iron earth lead with 15 cm thick alternate layers of charcoal dust & common salt including PCC pit in PCC 1:2:4 type B-1, RCC cover made out of cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) reinforced with TMT steel bars 8 mm dia @150 mm c/c both ways with suitable handle and angle iron 40x40x5mm frame, GI medium grade watering pipe 20 mm bore and funnel with wire mesh light grade protection pipe 40 mm bore up to main board complete as shown on electrical plate No 3 of MES Sch 2009 (Part-I) and testing on completion complete all as specified and directed by Engr-in-Charge. Note: - (i)On testing after completion of earthing, if desired earth resistance is not obtained, the earthing will be re-done by the contractor at his own risk & cost to the entire satisfaction of Engineer-in-charge.(ii) Item includes the cost of 7.5 m GI pipe for protection of earth strip. (iii) PCC pits extra cost of addtional length of watering pipe, bends elbows etc.shall be deemed to be included in the quioted rate. (iv) Item includes the cost of 7.5 mtr length copper earth strip 25x4 mm. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysOct 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender