Tender For special Rep Tobldg No P-131/1, P-131/2 & P-131/1 (03 X Single Offr Living Accn & P-212 Offr Guest Room) At Khojatoli Pocket & special Rep Of Replacement Of Damaged / Unsv Aluminium Internal Wiring With Frlsh Copper Wiring And Connected Wor
Tender Value
47.48 Lakhs
Estimated cost
Bid Submission
22 Oct 2026
19 days left
EMD
95000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ranchi → Jharkhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Rep Tobldg No P-131/1, P-131/2 & P-131/1 (03 X Single Offr Living Accn & P-212 Offr Guest Room) At Khojatoli Pocket & special Rep Of Replacement Of Damaged / Unsv Aluminium Internal Wiring With Frlsh Copper Wiring And Connected Works At Various Accomodation At Namkum Under Ge Ranchi
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster on brick Walls built in cement mortar including raking out joints, hacking for key, scrubbing down with water etc |
| 2 | Demolition of brick work built in cement mortar incl all quoins, arches, pillar etc |
| 3 | M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortor 1:4 all as specified and directed. |
| 4 | 10mm thick cement plastering in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed. |
| 5 | 15mm thick cement plastering in cement mortar 1:4 with WPC on fair faces of brick work or concrete surfaces finished even & fair without using extra cement complete all as specified and directed. |
| 6 | 5mm thick cement plastering in cement mortar 1:3 as on ceiling surfaces finished even and smooth without using extra cement. |
| 7 | Supply only liquid water proofing compound as per manufacture instruction. |
| 8 | Preparation of new plastered surface and applying one & more coat of white putty min 3mm thick on wall surfaces all as specified and directed. (Make : Birla, JK) |
| 9 | Preparation of old surfaces by scrapping down smoke dust, moulds, moss and efflorescent salts and removing oily and greasy spots etc and applying one coat of white putty min 3mm thick on wall surfaces all as specified and directed. (Make : Birla, JK) |
| 10 | Preparation of new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion complete all as specified and directed |
| 11 | M & L for preparing old plastered surfaces of wall and applying two coat of distemper oil emulsion, incl Priming plastered and other surfaces with alkali resistant priming paint, white or tinted complete all as directed. |
| 12 | Preparation of new plastered or unplastered surfaces of walls and applying two coat coats of oil bound distemper on ceiling surfaces |
| 13 | Preparation of old plastered or unplastered surfaces of ceiling and applying one coat coats of oil bound distemper complete all as specified. |
| 14 | Preparation of new plastered surfaces of walls and applying two coats of Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete as specified and directed. |
| 15 | M & L for complete removal of existing surface of walls any description by washing, rubbing down and applying two coats of Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. ® as specified and directed. |
| 16 | Taking up or down steel tubing and connections incl cleaning for refixing or removing to store yard of size 15mm bore. |
| 17 | Supplying and laying of 16mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 18 | Taking up or down steel tubing and connections incl cleaning for refixing or removing to store yard of size 20mm bore. |
| 19 | Supplying and laying of 20mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 20 | S&F in repairs Gun metal, globe or gate valve with iron wheel head, 20 mm bore, screwed both ends for iron pipe all as specifed. |
| 21 | M&L Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement. |
| 22 | Taking down chowkhats or frames of any description n exc 1.5 sqm each (without taking off shutters from the frame) |
| 23 | Taking down chowkats or frame with shutters (without taking off shutters from the frames) but Exc 1.5 and n. Exc 4 Sqm each |
| 24 | S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube supplying & fixing in opening as per specified & drawing. |
| 25 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame wealded/sealed to the stiles & rails with sutable PVC sheet beading and jointed togeather with solvent cement, fix in frame as spd. |
| 26 | S&F factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+-0.2mm). Window profile with hollow section with multi chamber,frame (88mm x 52mm),sliding sash (42mm x 67mm),sliding interlock (one vertical length in each shutter)(45.5mm x 28mm), glazing bead (24.5mm x 16mm) will be mitered cut and fusion welded at all corners, including railing of holes for fixing hardware and drainage of water ets, making arrangement for fixing of hardware, EPDM gasket. 1.2 +- 0.2mm thick galvanized steel frame (30mm x 18mm) 2 nos,sliding sash (30mm x 18mm) 2nos,sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100m long fastener. Hardware (touch lock of zinc alloyed (white powder coated),steel roller system,stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate excludes cost of glass and includes all oyher connected accessories) area n.exc.2.00 sqm each fixed from ground floor to height of 12 floors |
| 27 | S&F 7 mm thick aluminium grills of make \\"Decogrill\\" model DG 104 surrounded by aluminum 'C' channel and size of opening 75x75 mm all as specified and directed fixed from ground floor to height of 12 floors |
| 28 | S&F factory made uPVC white colour fixed window/ventilator made of extruded profile with wall thickness of 2.3 mm (+-2mm). Window profile with hollow section with multi chamber .Frame (60mm x 58mm). T profile (one vertical length in between two shutters) (60mm x74mm). Glazed bead (35mm x 20mm) will be mitered cut and fusion welded at all corners. including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware,EPDM gasket. 1.2 +-0.2mm thick.galvanized steel frame (28mm x 21.5mm), T profile (27mm x 17mm) to be inserted in repair profile. Frame will be fixed to the wall with 8mm x 100mm long fasteners. 5mm thick glazing with selected quality glass (Note: The unit rate excludes cost of glass and includes all other connected accessories.) area n.exc. 1.00 sqm each. |
| 29 | S/F 4.80mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane |
| 30 | S&F 4.8mm thick tinted glass ordinary quality and glazing with rubber gasket in squares exceeding 0.50 sqm in each pane |
| 31 | M&L for hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe -290 Gde E-165 |
| 32 | M & L cement concrete type C - 1 (1:3:6) using 20 mm graded stone aggregate as in bed blocks,fillings for holdfast etc complete. |
| 33 | M&L 35 mm thick Glazed and skeleton shutters open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chemfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.20 (a); for doors supplied and fitted to chowkats complete all as specified and directed. |
| 34 | S & F 35 mm Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides |
| 35 | S&F block boards 18/19mm thick gde 2 quality, interior grade, commercial type for cupboard shutter, shelf, etc complete |
| 36 | S&F 18/19 mm thick prelaminated particle board interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination incl teak wood liping 6mm thick on sides complete all as specified and directed. |
| 37 | M&L 2nd class hard wood plain solid straight chowkhat & frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed by Engr-in-Charge |
| 38 | S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and avg width of aperture 1.40 mm and fixed with ss wire staple |
| 39 | S&F Aluminium anodised barrel tower bolts of extruded section and fixed 200 mm long. |
| 40 | S&F Aluminium anodised handles of extruded section and fixed 150 mm long. |
| 41 | S&F 100 mm size Butt hinges medium weight cold rolled mild steel and fixed. |
| 42 | S&F 100mm long hasp & staple aluminium anodised wire type, incl bolt to hinge plate and fixed with screw complete. |
| 43 | S & F Magnet catcher with nuts and screw of mild steel bright finish all as specified and directed |
| 44 | S & F mild steel Drawer handle projection drop 50 mm to 65 mm on screw plate complete |
| 45 | S & F Magic Eyes for doors complete |
| 46 | S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixibng bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as directed. |
| 47 | S&F Mild Steel 150mm, ordinary rat tail rod pattern springs,incl roller and roller plate complete. |
| 48 | S&F Continuous (piano) hinges, mild steel, bright finish or elecrogalvenised, 30 mm width of flaps(when open) . |
| 49 | M&L preparation of new wooden or wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying tow coats of synthetic enamel paint over a coat of pink primer |
| 50 | M&L for prepration of new steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer |
| 51 | S & F in repairs 40 mm dia, cupboard Knobs fixed with nut, screws and washer of mild steel, bright finished |
| 52 | S&F Pressed steel frames (Factory made) made out of 1.25 mm thick black MS sheet for doors, with one or more rebates including necessary fixing lugs, butt hinges, lock strike plate, etc complete, size of frame 105x60mm complete all as specified. |
| 53 | .Description all as per ser item No 52 above but size of frame 125x60mm complete. |
| 54 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as directed. |
| 55 | Roughing surfaces of old concrete floor by picking sweeping clean and washing down with water to remove dust etc. |
| 56 | M&L brushing neat cement slurry with 3 Kg of cement per sqm . complete all as specified and directed. |
| 57 | M&L for coloured non skid ceramic tiles, 6 to7 mm thick, edgeless , area of each tile exc 600 x 600 mm in floors etc set and jointed in neat cement slurry and pointed in colored cement over and incl 15 mm thick screed bed or bedding layers of cement mortar 1:6 to match Shade, pattern, laying etc of tiles as directed at site complete all as specified and directed. |
| 58 | M&L coloured ceramic glazed tiles 375x250x7mm/450x300x7mm thick as in dado/skirting etc including 10 mm thick rendering in CM 1:4, set & jointed in neat cement slurry & pointed in white or coloured cement slurry & pointed in white or coloured cement |
| 59 | M&L for 9-10mm thick coloured vitrified ceramic tiles of size in floors, 600 x 600 mm set & jointed in neat cement slurry and pointed in coloured cement to match over & including 20mm thick screed bed in CM 1:6 complete all as specified & directed. |
| 60 | Description all as per Ser item No 59 above but as in Skirting with 10mm thick rendering in CM 1:3 |
| 61 | Dismantling water tanks capacity exc 500 ltrs & n exc 1000 ltrs and removing from site complete all as specified and directed. |
| 62 | Rotational moulded polythene water storage tanks, double layered (Cylindrical vertical with closed top) of capacity 1000 lit, hoisted and fixed in position as in repair complete all as specified. |
| 63 | S& F Ball brass valve, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed to dia of pipe 20mm as in repairs, complete all as specified and directed. |
| 64 | M & L for repairing broken edges of chajja's, roof projection, Fascias etc . In small widths/depths ( exposed area exc 0.05 sqm but n exc 0.10 Sqm ) by breaking the cracked/loose portion and filling with Cement Mortar / Plain Cement Concrete 1:2:4 ,Type B-0 , using 12.5 mm Crushed stone aggregates , over GI wire mesh, giving a coat of anti corrosive paint to exposed Reinforcement and using coat of anti corrosive paint to exposed Reinforcement and using chemical for bonding old and new concrete/plaster and finishing with CM 1:3 plastering, incl 2 coats of white wash to match the exisitng surfaces incl removing debris , necessary scaffolding , etc all as specified and directed. (Note : Reinforcement if any provided shall be measured and paid separately) |
| 65 | Description all as per ser item No 64 above herein before but exposed area exc 0.10 Sqm but not exc 0.16 Sqm |
| 66 | M&L for repair and rendering 10mm thick in cm 1 :3 on chajjas, facia, roof projection, column sides, beam bottom and sides including throating after removing cracked plaster and concrete including cleaning of viisible reinforcement and treating with cement slurry also necessary repair to cracked concrete if any with cement concrete 1:2:4 Type B-0 using 12.5mm graded aggregate including necessary scafolding work for double/single storey bldgs all as directed . |
| 67 | Mild steel TMT bars 10 mm dia and over as in reinforcement, cut to length, bent to shape required, incl cranking bending spirally for hooping for columns and binding with MS wire (annealed) not less than 0.9 mm dia or securing with clips. |
| 68 | M&L for mild steel 6 - 8mm dia TMT bars bent to shape required, including cranking, bending and binding with mild steel annealed wire not less than 0.9mm dia complete all as specified and directed. |
| 69 | S&F of white/colour PVC Cabinet Mirror of Size 350 mm X450 mm of approved make |
| 70 | S & F Viterous china wash basin, white, flat back, of size 550x400mm with CP waste coupling, and PVC waste pipe and including fixing brackets, complete fixed as in repairs suitable for pipe of bore 15mm. |
| 71 | S&F PVC waste pipe 32 mm dia and 900 mm long for WHB and Kitchen sink. |
| 72 | S&F in repair Towel Rail chromium plated D type of 20 mm dia 600mm long fixed with and including Chromium plated brass screws and wooden/plastic cleats incl brackets. |
| 73 | S&F in repair Soap dish, chromium plated with fittings complete all as specified & directed by Engr.in.charge. |
| 74 | Brass CP toilet paper holder fixed to wall with plugs and brass chromium plated screws. |
| 75 | S&F in repair 15mm bore bib tap long body cast copper alloy CP fancy type with capstan head handle,screwed down, screwed for brass ferrule and fixed |
| 76 | Supply and fixing in repairs Brass CP mixer for mixing for basin hot and cold water screwed down for iron pipe of 15 mm bore, complete all as specified and directed |
| 77 | S&F in repair Vitreous china wash down water closet pan ( pedestal pattern), white (excluding fixing bolt, flushing cistern and flush pipe) but including P or S trap& incl sheet cover of white colour all as directed and specified. |
| 78 | S & F in repair chromium plated health faucet for EWC all as specified and directed by EIC . |
| 79 | S&F in repair, plastic water closet seat cover, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device for pedestal pattern WC, black/ white colour. |
| 80 | Supply and fixing in repair PVC valveless syphonic action low level flushing cistern of 10 Ltr capacity including flushing pipe bend etc. complete all as specified and directed. |
| 81 | S&F in repairs shower rose brass cromium plated with swivel joints of size 75 mm dia cast copper alloy CP, fancy type with CP neck 6\\" long made to shape comptete. |
| 82 | Mild steel Powder coated pipes 32 mm dia with wall thickness 16 gauge, with fixing brackets stops, roller etc. in curtain rods fixed in repairs complete all as specified and directed. |
| 83 | S&F end balls made in conical surface and coated with brown/cherry/Golden colour dia of ball not less than 50mm and suitable for curtain rod of 20mm dia complete |
| 84 | 450 mm long PVC connection with brass check nuts for 15mm bore pipes of aproved quality |
| 85 | S&F PVC in repair connection 15mm dia 600mm long with PTMT nut. |
| 86 | S&F in repairs 15mm bore brass stop cock, cast copper alloy CP with long shank and cup (concealed type), high pressure with capstan head handle, screwed both ends for iron pipe or for unions. |
| 87 | Demolition of cement concrete in ground floors & Pavings n exc 15 cm thickness below or above ground level. |
| 88 | 75mm thick, PCC 1:3:6, type C-1 using 20 mm graded stone aggregate, as in plinth protection finished even & smooth without using extra cement complete all as specified and directed . |
| 89 | Taking down eaves, gutters and rain water pipes (any sizes or pattern) incl all fitting incl cleaning for refixing or removing to store yard. |
| 90 | 110mm dia PVC(SWR) rain water pipes single socketed in any length with rubber ring joints fixed to walls with and including stack clamps made out of 40mm by 3mm FI and 12mm dia round iron stays and making good the disturbed portion in CM 1:3 to match with surrounding area, complete all as specified and directed |
| 91 | M&L PVC(SWR) pipes 75mm dia single socketed, in any length with rubber ring joints,laid in trenches or fixed to wall with and including stack and clamp. |
| 92 | S&F PVC (SWR) bends/shoes any radius of 110mm dia |
| 93 | M&L PVC(SWR) Tee of radius 110mm dia. |
| 94 | S & F PVC(SWR) vent cowl of 110mm dia. |
| 95 | S&F PVC (SWR) bends any radius provided with access door of 75 mm dia |
| 96 | M&L PVC(SWR) Tee of radius 75 mm dia. |
| 97 | S&F PVC (SWR) vent cowl of 75mm dia |
| 98 | S&F 75 mm bore PVC floor trap with 75mm dia grating including jointing to waste pipe, all as specified |
| 99 | S & F in repair Brass chromium plated wall mixer hot and cold arrangement long shank suitable for 15 mm bore of pipe of approved quality all as specified and directed. |
| 100 | S&F in repair waste coupling of PTMT (half or full threaded) for 32mm dia complete all as specified and directed. |
| 101 | S&F in repair PTMT grating doom 100mm dia. |
| 102 | M&L for antifungal Chequered cement concrete tiles 30cm x 30cm x 22 to 25mm thick with grey cement and pigment over & including 20mm thick screed bed in CM 1:6, set, jointed and pointed in neat cement slurry in floors complete. |
| 103 | Taking down copper /aluminium point wiring (light, fan, bell,socket or power) complete including fixture and fittings such as switches , ceiling roses , pendent , regulators, sockets, light fitting etc . Removing m,aterials to store for keeping in safe custody or for taking credit ( credit a for above items should be made as per condition seperately ) and making good distrubed surfaces of walls, floors etc. |
| 104 | Taking down old/unserviceable electric meter, distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface all as specified and directed at site. |
| 105 | Taking down carefully copper/aluminium Sub main wiring of any size from surface/concealed /existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed. |
| 106 | M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed for the following :- (Note- Modular cover plate and base plate of any module with all fittings are included in point wiring.) Contractor should make good even distributed wall/surface as before to match with existing finish with plaster complete all as specified and directed by Engr-in-charge for following :- |
| 107 | (a) One light point controlled by one, one way switch 5 Amps |
| 108 | (b) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator |
| 109 | (c) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad. |
| 110 | (d) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board. |
| 111 | (e) One bell point controlled by one, bell switch 5 Amps |
| 112 | One light point controlled by one , two way switch 5 Amps |
| 113 | Description all as per item No 106 here in before but using 2.5 sq mm single core copper conductor cable of multistranded FRLSH PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor FRLSH PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly. |
| 114 | Description all as per item No. 106 here in before but using 4.0 sq mm single core copper conductor FRLSH cable of multistranded PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 4.0 sq mm PVC insulated copper conductor FRLSH cable as earth continuity conductor along with wiring and connecting to the common eath dolly. (for AC Point) |
| 115 | S & F for Modular Switch flush type, single pole, one way, and 5/6 Amp single module complete all as specified. |
| 116 | S & F for Modular Switch single pole, one way, and 15/16 Amp single module complete all as specified. |
| 117 | S & F for Modular Socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete all as specified. |
| 118 | S & F for Modular Switch Socket comb, 6/16A - 2/3 pin combined 2 module complete all as specified. |
| 119 | S&F for modular socket outlet mulitpurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete all as specified. |
| 120 | S & F for for Bell push modular 6 Amps single module complete all as specified. |
| 121 | S & F for lamp holder , PVC / Polycarbonate type with back plate suitable for batten/ slanting fittings complete all as specified and directed. |
| 122 | S & F for Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply complete all as specified and as directed |
| 123 | Supply and fixing ceiling rose surface bakelite 3 terminals 65 x 50mm complete all as specified. |
| 124 | M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one runs of PVC insulated with 6 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable,one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit |
| 125 | S & F for sheet metal enclosure MCB DB SPN 12 way with 200 Amps rated bus bar 240 volts double door with locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. |
| 126 | S & F for MCB Single pole and neutral rated capacity 40 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed. |
| 127 | S & F for MCB Single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed. |
| 128 | S & F for metal clad box suitable for 230 volt 50 Hz AC supply three pin with MCB SP 20/32 Amps including removal of old unserviceable one complete all as specified and as directed complete all as specified and as directed |
| 129 | S & F for Highly efficient LED Bulbs, 10 W, used as a ready replacement for existing GLS/CFL direct fit lamp,in B-22 cap of make Bajaj, Havells, HPL complete all as specified and directed |
| 130 | S & F for Decorative wall mounted luminaire made out of polycarbonate with unbreakable globe suitable for LED bulb and provosion of LED bulb 10 watts complete all as specified and as directed. Make Havells Cat No LHDLO6160099 or its equvalent in Philips, Bajaj, crompton |
| 131 | S & F for wall mounted LED tube light fitting not less than 10 W, 220V, 6500K batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Cat Part No Phillips BN021 LED12S 6500K PSU GR, Bajaj-BCLSBAL 12W CW or Havells LUMILINEPLUSPROBS12WLED865SPCSSIND |
| 132 | S & F for Energy saving new generation 10 watts LED bulk head fitting IP 65 luminaire with opal diffuser pre wired with warranty option of 2 years from date of installation and necessary mounting arrangements , provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED bulb complete all as specified and as directed. |
| 133 | S & F for wall mounted LED tube light fitting 40 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make :- Make Bajaj Cat part No BCLAB 20 W, Wipro Cat part No LL20-281-XXX065-ALI or , Havells LHEXACP7IN1J040 |
| 134 | S & F for Energy saving new generation environmental friendly long life versatile pressure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity not less than 25 watts with pre wired, and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. Cat part No Jaquar- OSL-GRY-LPCRSRT25WLC, Bajaj- VISTA P 32L WH PO PC SD, Crompton- TRP-415-25-57-SL-LM-NBK |
| 135 | S & F in repairs ceiling fans complete with blades, down rods, electronic regulator accessories, 230 v , 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushleess direct current motor (BLDC). Note : Old UNSV fan shall be deposited to store yard at AGE E/M Ranchi |
| 136 | S & F for energy efficient exhaust fan of 230 mm sweep made of metal body Ventil Air -DS type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick wall for fan base compelte all as specified and directed. (Note : Cost of suitable opening wall for fixing exhaust fan is deemed to be included in overall rate quoted). Note : Old UNSV fan shall be deposited to store yard at AGE E/M Ranchi |
| 137 | S & F for PVC non-metallic rigid conduit ISI marked heavy duty white/ Ivory colour and its accessories heavy duty ISI marked of size 20 mm dia for LAN, telephone and TV connections including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed. |
| 138 | M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia. medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part I including excavation and earthwork in any type of soil/strata and testing on completion. Note :- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted. |
| 139 | Taking down ceiling fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades and deposit to MES store yard of AGE E/M Namkum complete all as specified and as directed. |
| 140 | S & F for Modular Switch flush type, single pole, two way, and 6 Amp single module complete all as specified. |
| 141 | S & F for Modular Socket, 6A - 2/3 pin combined 2 module complete all as specified. |
| 142 | S & F for modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed. |
| 143 | S & F for sheet metal enclosure MCB DB VTPN 4 way with 200 Amps rated bus bar 415 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. |
| 144 | S & F MCCB TPN 415 volts 25 KA suitable for fixing on DB of capacity 63 Amps with extended terminals complete all as specified. |
| 145 | S & F for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. |
| 146 | Labour only for refixing the celing fan/ Exhaust fan obtained from item No133 above with replacement of unsv 3 core PVC insulated PVC sheated 3 core multistranded copper conductor cable of size 23/ 0.193 from ceiling rose to fan terminal including over hauling the fan, painting of ceiling fans complete with two coats synthetic enamel paint by spraying including filling cavities with filler after cleaning all dust etc. complete all as specified and as directed. |
| 147 | Labour only for refixing the electric meter obtained from item No 104 above complete all as specified and as directed |
| 148 | S & F for LED 10 watts batten with decorative end caps complete all as specified and as directed. |
| 149 | S & F for wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. |
| 150 | Supply and erection of Earth electrode 17.2 mm dia 3 mtr long of low carbon steel electrode with copper bonding of thickness 250 micron, Back-fill earthing enhancing compound AXIS ULTRA / AXIFILL type Carbon based compound conductive concrete type which has a resistivity of less than 0.12 Ohm Mtr as per Clause 14.5D of IEEE : 80 standard. Back-fill compound should be electronically conductive (Like in metals) and should not depend on moisture for conduction. Back-fill comound should be environment friendly & should be solidify when mixed with water and set like concrete and should not leach / diffuse into the ground. Back-fill compound shall not be mixed with any soil while pouring in the bore hole. Test Certificate as per as per IEC: 62561-7 for Back-fill compound shall be submitted along with the material including SS clamp to be provode both side and PVC EARTH PIT 300 X 300 MM WITH PLASTIC LID complete all as specified Note - (i) Earth electrode should be applicable Standards IS: 3043, IEC 62561-2 & IEC 60364-5 and made of High Tensile steel rods copper bounded, High tensile strength,good electrical conduction & effective performance and suitable for all type of soil and provided minimum distance 3 Mtrs. (ii) Back-fill compound should be Compliance to the Standards IEEE: 80, IS-3043, BS 7430, IEC 62561-7, ANSI/NSF 60 Certification.(iii) Positive low resistance electrical connection to the earth. (iv) Does not contain hazardous chemicals.(v) Electronically conductive (like in metals) and is not dependent on moisture.(v) Provide the desire value of earth resistance as per required specified values.(vi) Provide the Exothermic welding joints to entire grid system joints of earthing electrode. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysOct 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender