Tender For Repair/Maint Of Retaining Wall, Boundary Wall, Fencing, Water Tank Stagging And Other Misc B/R Works At New Cantt Under Ge Gangtok
Tender Value
40 Lakhs
Estimated cost
Bid Submission
26 Oct 2026
8 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
sikkim → Sikkim
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maint Of Retaining Wall, Boundary Wall, Fencing, Water Tank Stagging And Other Misc B/R Works At New Cantt Under Ge Gangtok
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 13-Oct-2026 | Date Corrigendum | Date | 26-Oct-2026 |
| 2 | 13-Oct-2026 | BOQ Corrigendum | BOQ | 26-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing the rubbish off the premises complete all as specified and as directed. |
| 2 | M&L for 25 mm thick PCC (1:2:4) type B-0 (using 12.5 mm graded stone aggregates) as in floors complete all as specified and as directed. |
| 3 | M&L for prepolished, chequered cement concrete tiles of size 25cmx25cmx22mm thick, as in floors etc, over and including 15 mm thick screed bed or bedding layer in cement mortar (1:6) and set and jointed in neat cement slurry and pointed in grey cement and pigments to match with the shade of tiles complete all as specified and as directed. |
| 4 | Demolition of cement concrete (un reinforced) in ground floors and paving n. exc. 15cm thickness (below or above ground level) removing rubbish off the premises etc complete all as directed. |
| 5 | M&L for 75 mm thick, plain cement concrete (1:3:6) type C-2 (using 40mm graded stone aggregate) as in plinth protection/ hard standing etc, finishing cement concrete surface even and smooth without using extra cement including making joints with bitumastic filing in proportion of bitumen and sand (1:2) complete all as specified and as directed. |
| 6 | M&L for cement concrete (1:3:6) type C-2 (using 40 mm graded stone aggregates) as in foundation filling and mass concrete complete all as specified and as directed. |
| 7 | M&L for PCC (1:3:6), type C2 (using 40mm graded stone aggregates) as in Plum concrete in retaining wall etc. incl plumbs of stone boulder (Basalt. Trap or any other appproved) of size 200 to 300mm complete all as specified and as directed.Note : Boulders will be measured & paid seprately under respective item as Supply only. |
| 8 | Supply only Boulders exceeding 200mm and upto 300mm dia (Basalt. Trap or any other appproved) of size 200 to 300mm complete all as specified and as directed. |
| 9 | Use and waste formwork to faces for rough finished flat surfaces of concrete of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter complete all as specified and as directed. |
| 10 | M&L for PCC 1:3:6 type C1 (using 20 mm graded stone aggregates) as in coping, bed plates, parepet, plinth course including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed. |
| 11 | M&L for PCC 1:2:4, type B2 (using 40mm graded stone aggregates) as in surface channels and drains including forming fair finished to drain channel and incl necessary formwork complete all as specified and directed. |
| 12 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 13 | S&F Joist, channel, angle, or tee sections,fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) of Fe-410-W(Gde-E-250)quality-B |
| 14 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed. |
| 15 | Supply only chain link mild steel galvanised fencing any size or type or 4 mm dia galvanized wire (100x100) mm mesh made upto matress lapped wire and laid on position / fixed on posts etc complete all as specified and as directed. |
| 16 | S&F for mild steel screw bolts of 11 to 15mm dia of shank (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt not exceeding 5cm long complete all as specified and as directed. |
| 17 | M&L for round bars 10 mm dia and over, as reinforcement for concrete cut to length, bent to shape required including cranking, bending, spirally hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia, as in line wire for sec fencing etc and similar work conforming to Fe 290 Gde-E-165 complete all as specified and directed. |
| 18 | M&L for preparation of new or previously untreated steel surfaces of any description exc 10cm in width or girth applying two coats synthetic enamal paint over one coat of red oxide primer complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 13, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 26, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 8 days
Oct 26, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 8 daysOct 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysOct 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender