Tender For Special Reapirs To Road From T-77 (Near Ro Plant) To T-60 And Provn Of Fencing Of Xxxxxx At Lower Patiyala At Chakabama Mil Stn.
Tender Value
34.50 Lakhs
Estimated cost
Bid Submission
22 Oct 2026
19 days left
EMD
69000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
zakhama → Nagaland
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Reapirs To Road From T-77 (Near Ro Plant) To T-60 And Provn Of Fencing Of Xxxxxx At Lower Patiyala At Chakabama Mil Stn.
BOQ
| Sl. No. | Item Description |
| 1 | Material and labour for Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area not exceeding 400 Sqm and depth exc 50mm and n.exc 100 mm and removing materials from site of work or stacking for reuse at site complete all as specified and directed. |
| 2 | Material and labour for 75 mm thick WBM (compacted thickness) with broken metal of granite, trap or basalt stone of grading 2 (63mm to 40mm) or grading 3 (50 to 20mm size) spread, rolled with 8 to 12 tonne power road roller and consolidated to required camber and gradient complete all as specified and as directed. |
| 3 | Material and labour for preparing WBM surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly a priming/ tack coat with bituminous primer @ 10 Kg per 10Sqm using paving bitumen grade VG-10 complete all as specified and as directed. |
| 4 | Material and labour for premix bituminous macadam (using paving bitumen VG-20) laid / rolled and compacted to required gradient and camber (consolidated thickness 75mm or less), rolled with 8 to 12 tonne power roller complete all as specified and as directed.Note :- Binder content, paving bitumen VG-20 shall be @ 4% by weight of total mix. All materials are prepared by hot mix plant. |
| 5 | Material and labour for preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly a priming/ tack coat with bituminous primer @ 5 Kg per 10Sqm using paving bitumen grade VG-10 complete all as specified and as directed. |
| 6 | Material and labour for applying premixed bituminous carpet, 40mm consolidated thickness with 0.54 Cum of stone chippings mixed with 29.2 Kg of binder (using paving bitumen VG-20), rolled with power roller 8 to 12 tonne to required camber and gradient complete all as specified and directed. |
| 7 | Material and labour for liquid seal coat applying evenly binder @ 9.80Kg per 10 Sqm using paving bitumen of grade VG-20 blinding with 6.3mm size stone chippings @ 0.09 Cum per 10Sqm and rolled to required camber and gradient with power roller 8 to 12 tonne complete all as specified and directed. |
| 8 | Demolition of brick work or stone/boulder masonry, built in cement mortar including all quions, arches, pillers etc complete all as specified and as directed. |
| 9 | Material & labour for walling of random rubble masonry, with dressed stone, well bonded, laid dry for edging and similar works complete all as specified and directed. |
| 10 | Material & Labour for Painting lines, dashes, arrows, letters, etc. on road, pavements and the like exceeding 10cm wide with adquate no. of coats of road marking paint of colour white or golden yellow complete including preparation of surfaces all as specified and as directed. |
| 11 | Supply and fixing metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed |
| 12 | Supply and fixing in repair of cat eye reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector fixed with and including aluminium studs of suitable size as per manufactures instructions complete all as specified and directed. |
| 13 | Excavation in post holes (or similer holes) each n.exc 0.5 Cum getting out, returning filling and ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm watering and removing surplus soil to a distance n.exc. 50 m and making good the disturbed surface in any type of soil complete all as specified and as directed. |
| 14 | Supply and fixing Angle Iron, Flat Iron, Hand rails, half round or other steel section or posts and struts in fencing drilled and countersunk for balusters running bars, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire, etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed. |
| 15 | Supply and fixing Mild steel Round bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 16 | Supply and fixing galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire staples or steel pins etc complete all as specified and directed (each line wire to be measured). |
| 17 | Fixing only chain link fencing 4mm dia galvanised steel wire 75 x 75 mm mesh, made up into mattresses or cages, lapped including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and as directed. |
| 18 | Supply only chain link MS galvanised steel wire fencing 4mm dia and 75 x 75mm mesh , made up into mattresses or cages,lapped wired complete all as specified and as directed.Note- Weight of chain link shall measured through a BOO convened by GE. |
| 19 | Supply and fixing mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exc.5cm long, diameter of neck 11 to 15 mm complete all as specified and as directed. |
| 20 | Material and Labour Preparation of new steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer Complete all as specified and as directed. |
| 21 | Material and Labour Preparation of new steel surfaces of any description, n exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer Complete all as specified and as directed. |
| 22 | Excavation in trenches not exceeding1.5metre wide and not exceeding1.5 metre in depth and not exc10Sqm on plan in any type of soil and getting out in any type of soil Complete all as specified and as directed. |
| 23 | Material and Labour for plain cement concrete type C2 1:3:6 (using 40mm graded aggregate) as for in foundations, filling and mass concrete post holes for securing angle vertical posts complete all as specified and as directed. |
| 24 | Material and Labour for Cement concrete 1:4:8 type D2 using 40 mm graded crushed stone aggregates in foundation filling and mass concrete / in post hole and sub base complete all as specified and as directed. |
| 25 | Material and labour for reinforcement cement concrete (Nominal mix) Type B1 (1:2:4) using 20mm graded aggregate as in footing , foundation beams, plinth beams, based for column including suitable size of use and waste of formwork complete all as specified and as directed. |
| 26 | Material and labour for reinforcement cement concrete (Nominal mix) Type B1 (1:2:4) using 20mm graded aggregate as in column, pillars, piers, posts and struts including suitable size of use and waste of formwork complete all as specified and as directed. |
| 27 | Supply and fixing framed work as in door or gate of angel,mild steel plate or other section with gusset plates, rails, braces, etc complete of Gde Fe -410 W or E-250, drilling ,welding etc for fixing of steel sheeting or other covering .Doors etc to be prepared for hanging or sliding Complete all as specified and as directed. |
| 28 | Supply and fixing mild steel work conforming to Fe-310-0 or Fe-410-0 in hold fasts of flat of flat iron , hooks, pintle hinges, cleats hand made sliding bolt and smilar items complete all as specified and as directed. |
| 29 | Material and Labour TMT bars (Fe 500),10mm dia and over in reinforcement cut to length,bent to shape required incl bending spirally cranking,hooping for columns,hooking ends and binding with and including mild steel wire(annealed) not less than 0.9 mm dia or securing with clips, all as specified and as directed. |
| 30 | _Ditto -all as per item No 29 here -in -before but 5mm dia and over upto and including 10mm dia in stirrups space and binders all as specified and as directed. |
| 31 | Material and labour pre polished, precast Chequered cement concrete tiles of size 250mmx250mm of 22mm thick as in floors set , jointed & pointed with neat cement slurry with white cement and pigment including 15 mm thick screed bed or bedding layer in cement mortar (1:4) over 100mm thick hardcore with stone aggregates of 63mm guage spread and rolled complete all as specified and as directed. |
| 32 | Removal of excavated material (soil) to a distance n.exc 50 mtr and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed. |
| 33 | Returing, filling in (soil) including spreading, levelling,watering and well ramming in layer not exceeding 25cm thick in any type of soil complete all as specified and as directed. |
| 34 | Material and labour for 15mm thick rendering in CM (1:4) on brick work or concrete surface as on wall, finished the surface even and smooth without using extra cement complete all as specified and directed. |
| 35 | Materials and labour for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of white cement primer complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysOct 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender