Tender For Comprehensive Repair And Maintenance Of B/R And E/M Works In Otm And Md Accn In 108 Inf Bn (Ta), Stn Hq And Other Small Units Under Age B/R-I Of Ge Saugor
Tender Value
30 Lakhs
Estimated cost
Bid Submission
15 Oct 2026
11 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sagar → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Repair And Maintenance Of B/R And E/M Works In Otm And Md Accn In 108 Inf Bn (Ta), Stn Hq And Other Small Units Under Age B/R-I Of Ge Saugor
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhat or frame (without taking off shutter from the frame), area of opening n'exc 1.5 Sqm each, removing from the site complete all as specified and directed.Note:- In order to facilitate the taking down of chowkhat or frame with holdfasts, the cost of cutting holes or dismantling of brick/stone/concrete masonry work of any description in Jambs of existing opening or removing any other fixing arrangement and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4, type B-1 as required so as to re-fix the holdfasts of new chowkhat or frame shall deemed included in quoted unit rates.(ii) Hold fast / fasteners shall be measured and paid separately in respective item hereunder. |
| 2 | M&L for mild steel framed work such as grills gratings, sun shed cover fixed with nut bolts incl, cutting drilling holes etc., with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed baluster, walk ways, railings, framework or water tanks and similar work conforming to Fe 290 Gde E 165 complete all as specified and directed. |
| 3 | S & F UPVC ventilator with exhaust fan, for ventilation in toilet with (openable type window / Fixed glass as per requirement) of frosted glass with UPVC frame of approved colour, thickness 60 mm, Length 750mm and height 600 mm complete all as specified and directed by Engr-in-charge. |
| 4 | S&F Factory made uPVC white color Sliding window(area not exceeding 2.00 sqm each), Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanized steel Frame (30mm x 18mm) 2 Nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. complete all as specified and directed.Note : Net Opening will be measured for payment purpose.) |
| 5 | Taking down chowkhat or frame (without taking off shutter from the frame), area of opening exc 1.5 sqm and n'exc 4.00 sqm each, removing from the site complete all as specified and directed.Note:- In order to facilitate the taking down of chowkhat or frame with holdfasts, the cost of cutting holes or dismantling of brick/stone/concrete masonry work of any description in Jambs of existing opening or removing any other fixing arrangement and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4, type B-1 as required so as to re-fix the holdfasts of new chowkhat or frame shall deemed included in quoted unit rates.(ii) Hold fast / fasteners shall be measured and paid separately in respective item hereunder |
| 6 | S&F Solid PVC door frame of size 50mmX47mm made out of 5mm single side prelam PVC sheet used instead of plain colour PVC sheet (edges will be painted to match with prelam sheet) reinforced with MS square tube, supplying & fixing in opening as per specification.Note: The cost of fasteners (10mm dia, 100mm long, min 6 Nos.) shall be deemed included in quoted unit rates. |
| 7 | S&F factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6mm raised panel design with 5 mm thick moulded PVC sheet on the front face & 5mm prelam PVC sheet on back face, supplying & fixing in frame at site complete all as specified and directed. |
| 8 | S&F 150mm size extruded aluminium alloy handle, fabricated type, anodized complete all as specified and directed. |
| 9 | S&F 150mm long aluminium anodized barrel tower bolt, extruded section complete all as specified and directed. |
| 10 | S&F100mm long extruded aluminium alloy butt hinges with galvanized mild steel hinge pin, anodized and fixed, type B-21 complete all as specified and directed. |
| 11 | S&F 105 mm X 60 mm size pressed steel frames for door with one or more rebates including necessary lugs, hinges, lock strike plate etc, one shop coat of red oxide primer, filing PCC (1:3:6), type C-0 (using 12.5 mm graded store aggregate) in hollow portion of frame and two coat of synthetic enamel paint after preparation of primed surface complete all as specified and directed.Note: The cost of lugs, hinges, lock strike plate etc, shop coat, synthetic enamel paint and PCC filling work shall be deemed included in quoted unit rates. |
| 12 | S&F 125 mm X 60 mm size pressed steel frames for door with one or more rebates including necessary lugs, hinges, lock strike plate etc , one shop coat of red oxide primer, filing PCC (1:3:6), type C-0 (using 12.5 mm graded store aggregate) in hollow portion of frame and two coat of synthetic enamel paint after preparation of primed surface complete all as specified and directed.Note: The cost of lugs, hinges, lock strike plate etc, shop coat, synthetic enamel paint and PCC filling work shall be deemed included in quoted unit rates. |
| 13 | S&F 35 mm thick flush shutters factory made, solid core construction, with block board core and plywood face panels commercial type on both side including both side decorative laminate 0.9mm thick type 1 of surface finish, colour and pattern as approved & fixed with approved adhesive as per manufacturer instruction complete all as specified and directed. |
| 14 | M&L for 2nd class HW (Teak) glazed and skeleton shutters ( factory made), 35 mm thick open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, cla-use 8.24 (a); for doors supplied and fitted to chowkhats complete all as specified and directed. |
| 15 | M&L for two coat of synthetic enamel paint over one coat of pink primer on new wood/wood based surface such as removing all splashes, drops dirt and leaving premises in al clean state complete all as specified and directed. |
| 16 | S&F 300 mm long Aluminium alloy, anodized, sliding door bolt with hasp not less than 12mm, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 17 | S&F 150 mm long door stopper made of aluminium alloy body and tongue, anodized fixed in door with stainless screws etc complete all as specified and directed. |
| 18 | S&F 150mm long mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 19 | M&L for two coats of synthetic enameled paint over a coat of red oxide including preparation of new steel surfaces of any description over 10 cm width or girth complete all as specified and directed. |
| 20 | S&F galvanized mild steel wire cloth, 0.46 mm nominal dia of wire and average width of aperture 1.45mm and fixed with tinned tacks, or galvanized wire staples complete all as specified and directed. |
| 21 | S&F mild steel work with rolled/hollow tube section as in post, main and cross beams, hip and jack rafters, purling where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates confirming to Fe-290 ( Gde E-165) complete all as specified and directed. |
| 22 | Dismantling existing scantling of any discretion in any position complete all as specified and directed. |
| 23 | M&L for second class hardwood (sal) as in scantling timber clean sawn, framed, unframed and fixed complete all as specified and directed. |
| 24 | M&L for complete removal of existing treatment from wall (any description) with entire satisfaction of Engr-in-Charge, complete all as specified and directed. |
| 25 | S&F GI based pre-painted galvalume sheet, 0.50 mm thick coloured having aluminum zinc coating 150 gsm/ sqm and tensile strength 550 Mpa, double ribbed trapezoidal profile steel sheet as in roof covering /cladding to wall fixed with self tapping screws complete, including dismantling existing sheet of any description complete all as specified and directed. |
| 26 | S&F 0.50mm thick galvalume Aluminum Zinc coating GI based corrugated steel sheet for ridge having tensile strength of 550 Mpa and AZ150 fixing for closing gable truss suitable for profile pattern sheet fixed with J-Hook and double washer at top and bottom of J-Hook and apply silicone sealant around the screw hole and screw head , esuring it fills the entire gap. including dismantling of Asbestos cement (corrugated, semi corrugated, etc) sheets roofing complete all as specified and directed. |
| 27 | S&F Mild steel screw bolts (machine made) with hexagonal / square heads at one end & screwed the other/ screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut, length of bolt exc 22.5cm & n exc 30cm long dia of shank 11 to 15 mm complete all as specified and directed. |
| 28 | S&F Rolled mild steel Plates (plain or chequered) channels. Square cut or notched (ordinary & counter sunk) forming holes, with riveted, bolted or welded attachment GDE Fe410-0 or Fe 310-O complete all as specified and directed. |
| 29 | Dismantling ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets & frames (if any) in ceilings (measured flat & not girthed) complete all as specified and directed. |
| 30 | S & F GI ( cold rolled) snap grid size of 595mm x 595 mm frame work of 24 x 38 x 0.60 mm, Tee Section ( bottom pre coated ) and 24 x 24 x 0.5 mm thick angle rung along the wall incl GI suspenders wire as per manufacturer instruction as in ceiling with and incl S & F coloured Non Asbestos designer ceiling cement boards 4 mm thick complete all as specified and directed. |
| 31 | Taking Down wooden/PVC wall panelling and similar work all as specified and directed by Engr in charge |
| 32 | S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling (At the spacing of 1 feet centre to centre) inclusive of fixing on to wall to make PVC Frame as per satisfication and as per manufacturer instruction /drawing comlplete all as specified and directed. |
| 33 | S&F 25mm thick insulated PVC wall Lining consisting of PVC insulated panels having expanded polytyrene (EPS) Stuck to 2 mm thick PVC insulated panels with wood grain printed pvc sheet duly fitted into the wall complete all assessories as per specification and drawing all as specified and directed by Engr in charge |
| 34 | S&F in repair 12 mm thick toughened glass doors with set of new SS hydraulic floor spring & top pivot, cutting to shape, drilling holes as required incl figured/ frosted glass film of approved pattern/ logo/ shape on one side, SS Handle 600mm Long of approved design and shape, locking arrangement and all other fixing assessories. Complete all as specified and directed.Note:- Hydraulic door spring shall be suitable for operating door having weight 120Kg to 150 Kg. |
| 35 | Taking down cement plaster on brick work or stone walls, etc incl raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 36 | M&L for 20mm thick cement plaster on brick / concrete/ stone surfaces in two coat (Ist coat 15mm thick in CM 1:6 and 2nd coat 5mm thick in CM 1:4 mixed with liquid WPC @ 200ml Per liter) complete all as specified and directed.Note:-WPC will be paid separately under respective item. |
| 37 | M&L for 15 mm thick rendering in cement mortar (1:6) on brick / concrete/ stone walls, surfaces finished even and fair without using extra cement including taking down of existing plaster of any description, complete all as specified and directed. |
| 38 | M&L for 5 mm thick plastering in cement mortar (1:3) on ceiling, surfaces finished even and smooth without using extra cement including taking down of existing plaster of any description complete all as specified and directed. |
| 39 | Demolition of brick work or stone/ boulder masonry work built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work and precast concrete articles complete all as specified and as directed. |
| 40 | M&L for Brickwork with old size sub class 'B' bricks, straight or curved on plan exc 6m mean radius, built in Cement mortar 1:6 complete all as specified and directed. |
| 41 | M&L for Brick work with old size subclass 'B' bricks, straight or curved on plan in half brick thick wall built in CM 1:4 complete all as specified and directed. |
| 42 | M&L for 15 mm thick rendering in cement mortar (1:4) on brick / concrete/ stone surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 43 | M&L for preparation of the newly plastered surfaces of wall & applying 3 coats of white wash on wall surfaces complete all as specified and directed. |
| 44 | M&L for one coat of synthetic enamelled paint on old painted wood/wood based surface of any desription over 10cm width or girth incl preparation surfaces and such as removing all splashes, drops, dirt after painting work and leaving premises in a clean state complete all as specified and directed |
| 45 | M&L for two coats of cement base wall care putty in two coats @ 1Kg/Sqm (0.5Kg in each coat) on new plastered surface of wall as preparatory work to painting including cleaning surface before application of putty and necessary rubbing of puttied surface with appropriate size of sand paper so as to make the surface truly smooth, free from all dirt/ dust and made ready to receive the finishing coat of paint complete all as specified and directed.Make : Birla white / JK putty/ Berger |
| 46 | All as per item No 45.00 above but including complete removal of existing treatment from old treated surface of any discription. |
| 47 | M&L for two coats of acrylic exterior emulsion paint over and including one coat of exterior primer on prepared surfaces of wall complete all as specified and directed.Make : Asian(Appex Altima)/ Berger(weather coat all Gaurd)/ Nerolac(Excel total)Note : (i) The emulsion used shall be of approved colour by GE diluted as per manufacturer's instructions(ii) Contractor shall ensure washing floors, cleaning glass , joinery , electric fitting, etc after painting work with entire satisfaction of Engg-in-charge. |
| 48 | M&L for two coat of acrylic interior emulsion paint over and including one coat of interior primer on prepared surfaces of wall complete all as specified and directedMake : Asian(Apcolite)/ Burger(self breath easy)/ Nerolac (nerolac Impression HD)Note : (i) The emulsion used shall be of approved colour by GE diluted as per manufacturer's instructions(ii) Contractor shall ensure washing floors, cleaning glass , joinery , electric fitting, etc after painting work with entire satisfaction of Engg-in-charge. |
| 49 | M&L for preparation of the newly plastered surfaces of ceiling & applying 3 coats of white wash on ceiling surfaces complete all as specified and directed. |
| 50 | M&L for one coat of white wash on old decorated surface of ceiling including preparation of surface i.e brooming down with steel wire brushes scraping down moulds moss and efflorescent salts and treating oil and greasy spots, removing of nails, making good holes , craks etc and washing floors, cleaning glass , joinery , electric fitting, etc all as specified and directed. |
| 51 | M&L for Two coat of white wash on old decorated surface of walls including preparation of surface i.e brooming down with steel wire brushes scraping down moulds moss and efflorescent salts and treating oil and greasy spots, removing of nails, making good holes , craks etc and washing floors, cleaning glass , joinery , electric fitting, etc all as specified and directed. |
| 52 | M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of pink primer all as specified and directed. |
| 53 | S&F in repair 25mm dia stainless steel (202 Grade) curtain rod not less than 0.70mm thick with end caps (Latoo) and brackets complete all as specified and directed.Note : In openings exceeding 1.2m wide, additional brackets shall be provided so as the distance between two consecutive brackets shall not exceed 1.2m. |
| 54 | M&L for GI tubing 15 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors including taking down existing tubing of any description complete all as specified and directedNote : Cutting chases and making good shall be measured and paid separately under respective item here-in-after. |
| 55 | S&F 20 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl fittings and the holes in walls and floors shall be made by drilling with drill or jumper and not by dismantling the brick/concrete. After fixing holes shall be made good with CM 1:3 properly including taking down 15 mm dia GI tubing and connections complete all as specified and directed complete all as specified. Note : Cutting chases and making good shall be measured and paid separately under respective item here-in-after. |
| 56 | S&F GI tubing 20 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors including taking down 20mm dia GI tubing and connections complete all as specified and directedNote : Cutting chases and making good shall be measured and paid separately under respective item here-in-after. |
| 57 | Cutting chases, pinning in, in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring etc. and making good, in cement mortor 1:3 cutting not exceeding 10cm girth complete all as specified and directed. |
| 58 | S&F in repair for 110mm dia PVC(SWR) pipes single socketed, in any length with rubber ring joints,fixed to walls complete all specified. |
| 59 | S&F in repair for 75 mm dia PVC(SWR) pipes single socketed, in any length with rubber ring joints,fixed to walls. complete all as specified . |
| 60 | S&F in repair for 75 mm dia PVC(SWR) pipes single socketed, in any length with rubber ring joints,laid in trenches or in floors complete all as specified . |
| 61 | S&F for 110mm dia PVC(SWR)pipes bends any radious \ complete all as specified and directed. |
| 62 | S&F for 75 mm dia PVC(SWR)pipes bends any radious. complete, complete all as specified and directed. |
| 63 | S&F for 110mm dia PVC(SWR)pipes junction,single (single T/Y ) equal or unequal any radious.with acces door, complete all as specified and directed. |
| 64 | S&F for 75 mm dia PVC(SWR)pipes junction,single (single T/Y ) equal or unequal any radious.with acces door, complete all as specified and directed. |
| 65 | S&F in reapir for 110mm dia PVC(SWR) vent cowl, complete all as specified and directed. |
| 66 | M&L in repair for 75 mm dia of out let PVC (SWR) floor trap plain with CP grating including jointing with solvent cement as in repair complete all specified. |
| 67 | S&F 32mm bore dia bottle trap size with 300 mm & 190mm wall connection pipes & wall flange chromium plated incl required concealed pipe up to trap with required accessories complete in all respect including taking down existing bottle trap/ waste coupling of any description, complete all as specified and directed.Make Jaquar (Cat Part No ALD-CHR-769LX300X190) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 68 | S&F in repair CP brass Single Lever High Flow Diverter consisting concealed body, Exposed part kit and bath spout Make of Jaquar cat no. FUP-CHR-29065MKPM, ALD-065M or equivalent in Kohler or , Grohe etc complete as per complete all as specified and directed. (Contractor Shall Provide 10 year Warrantee certificate and Manufacturer's Test Certificate including copy of invoice of each item). |
| 69 | S&F in repair chromium plated exposed part Kit of concealed stop cock & flush cock with fitting sleeve, operating lever & adjustable wall flange with seal including regular body of concealed stop cock cold only suitable for 15mm pipeline with protection cap with required accessories complete in all respect as specified and directed.Make : Jaquar (Cat Part No for exposed part-FUS-CHR-29083K and concealed Part:-ALD-083R,ALD-083L/ALD-089R/ALD-089L/ALD-081) or equivalent in kohler/Hans Grohe/Villeroy and boch. |
| 70 | S&F Overhead Shower 120X120mm Square Shape Single Flow (Face Plate Stainless Steel & ABS Body) with Rubit Cleaning System and Shower Arm Casted 160mm Long Light Body Round Shape for Wall Mounted Showers with Flange , chromium plated, fixed to pipe including taking down existing shower rose and arm of any description complete all as specified and directed.Make : Jaguar ( Cat Part No.: Shower : OHS-1667 , Arm : SHA-477) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 71 | S&F Hand Shower (Health Faucet) with 8mm Dia, 1 Meter Long Flexible Tube & Wall Hook with N.R.V (Back Flow Preventer), chromium plated with required accessories complete in all respect including taking down existing Hand Shower of any description, as specified and directed.Make Jaquar (Cat Part No ALD-CHR-577) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 72 | S&F Bib cock with wall flange, chromium plated, including taking down existing tap of any description, complete all as specified and directed.Make : Jaquar- ( Cat Part No FUP-CHR-29037PM) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 73 | S&F in repair 15mm bore 2 Way Bib Cock with Wall Flange chromium plated including taking down existing tap of any description, complete all as specified and directed.Make : Jaquar-(Cat Part No FUP-CHR-29041PM) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 74 | S&F Angular Stop Cock with Wall Flange, chromium plated with required accessories including taking down existing tap of any description, complete in all respect as specified and directed. Make : Jaquar (Cat Part No FUP-CHR-29053PM) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 75 | S&F Towel Rack 600mm long with Lower Hangers with 3 Hooks, chromium plated including taking down existing towel rod/rack of any description, complete all as specified and directed.Make : Jaquar- (Cat Part No CPA-CHR-1181FH) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 76 | S&F in repairs purposely moulded looking mirror 5 mm thick glass fixed with studs all as specified and directed by Engr-in- charge. |
| 77 | S&F in repair 15mm dia SS-304 Heavy Duty Connection Pipe for Wash Basin, Geyser, Hot & Cold Water, Basin Mixer | Leak Proof Flexible Tap Connector Pipe | Rust Free, Durable, Long Life ,,450 mm long, complete all as specified and directed. |
| 78 | S&F Vitreous china Rimless Single Piece WC with PP Soft Close Slim Seat Cover, Hinges, Dual Flush Cistern Fittings, Fixing Accessories and Accessories Set, Size: 370x665x750 mm, p or S Trap including dismantling/taking down existing WC of any description, complete all as specified and directed.Make : Jaquar (Cat Part No CNS-WHT-853P180SPPSM/CNS-WHT-853S220SPPSM) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 79 | S&F Wall Hung Cistern (Compatible with 39mm Drainage Pipes) with Black Top & Installation Kit with Drainage Pipes of require length, connectyion to WC complete including dismantling/taking down existing cistern of any description, complete all as specified and directed.Make : Jaquar (Cat Part No ESH-WHT-184NBTT or equivalent Hindware/ johnson/ parryware |
| 80 | S&F Soap Dish Holder with wall flange , chromium plated with required accessories complete in all respect including taking down existing Soap Dish Holder of any description, as specified and directed . Make Jaquar (Cat Part No CPA-CHR-1131) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 81 | S&F Vitreous china Table Top Basin, Size: 425x340x175 mm, white, Including with Waste coupling 32mm Size Half Thread with 130mm Height ,waste pipe, pvc connections and Single Lever Tall Boy with 190mm Extension Body Fixed Spout without Popup Waste System with 600mm Long Braided Hoses with required accessories complete all as specified and directed.Note : Pillar tap and PVC connection will be measured paid separately.Make : Jaquar (Cat Part No CNS-WHT-903-Basin), Cat Part No ALD CHR -709L130-waste), (Cat Part No FUP-CHR-29005BPM-mixer) |
| 82 | S&F Single Towel Rail 600mm Long, chromium plated including taking down existing towel rod/rack of any description, complete all as specified and directed.Make : Jaquar- (Cat Part No CPA-CHR-1111) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 83 | S&F in repair for peg set of six S.S. fixed to wall with PVC plugs and screw, complete all as specified and directed. |
| 84 | S&F rotational molded poly-ethylene water storage tanks (cylindrical vertical with closed top), 1000 litres capacity, triple layer in construction white in color hoisted and fixed in position including 20mm PTMT float valve assembly including accessories and dismantling of old tank ( any description and capacity) complete all as specified and directed.Make : Sintex / Supreme(Siltank) / Plasto |
| 85 | S&F chicken wire mesh 0.71 mm dia and aperture size 25mm fixed in position complete all as specified and directed. |
| 86 | S&F in repair gun metal globe /valve with iron wheel head screwed both ends for iron pipe of 20mm bore, complete all as specified and directed. |
| 87 | S&F kitchen sinks with drainage board, made out of 304 grade 0.8mm/1.0mm thick stainless steel sheet with ;plugs, washers, and waste pipe including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets, and connecting union to pipe including taking down existing sink of any description complete all as specified and directed.Make : Nirali (Popular range-SMALL-glossy finish) /Cera(Cat part No B4512122-glossy finish)/Johnson (Cat part No K030206SBG) |
| 88 | S&F in repair Stainless steel Plate Rack, 900mmx600mmx250mm in size, made of 1mm thick 202 grade stainless steel sheet including taking down existing Plate rack ( any description) complete all as specified and directed. Please Enable Macros to View BoQ information |
| 89 | S&F in repair Stainless steel Plate Rack, 900mmx600mmx250mm in size, made of 1mm thick 202 grade stainless steel sheet including taking down existing Plate rack ( any description) complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysOct 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender