Tender For Provn Of Plate Rack, Sink Wash Basin & Brick Wk In 24 X Or Qtrs (Np-1, Np-2 & Np-5) At Jaideep Vihar Of 14 Ew Bn) Under Ge (West) Pathankot
Tender Value
43.64 Lakhs
Estimated cost
Bid Submission
22 Oct 2026
18 days left
EMD
87280
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pathankot → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Plate Rack, Sink Wash Basin & Brick Wk In 24 X Or Qtrs (Np-1, Np-2 & Np-5) At Jaideep Vihar Of 14 Ew Bn) Under Ge (West) Pathankot
BOQ
| Sl. No. | Item Description |
| 1 | M&L for Brick work using sub class 'B' bricks straight or curved on Plan exc 6m mean radius built in CM 1:6 all as specified and directed |
| 2 | Taking down cement plaster on brick or concrete or stone walls etc including racking out joints hacking for key scrubbing down with water any description. |
| 3 | M&L 15mm thick rendering in CM 1:6 on brick wall or concrete surfaces finished even and fair complete all as specified |
| 4 | M&L for rendering 15mm thick in CM 1:4 mixed with liquid water proofing compound (as per manufacturer’s instructions) on fair faces of brick work ,concrete surface of wall, fin, facia, chajjas, parapet and similar article finished surface even and smooth without using extra cement including necessary scaffolding up to four storeys height of bldgs if required complete all as specified and as directed.Note:- WPC shall be measured and paid separately |
| 5 | M&L for preparation of newly plastered internally old surfaces of wall by scrapping with mechanical wall sander , having RPM not less then 1500 and applying min 1 to 1.50 mm thick wall care putty on the surfaces & making the surface absolutely smooth surface and applying one coat of primer (as per manufacturer’s recommendations) on the surfaces and applying two coats of distemper oil emulsion finished without any brush marks on the surface in any colour including necessary scaffolding up to four storeys height of bldgs if required ,Shade/colour shall be approved by GE,all painted areas site to be cleaned and hand over as earlier without any extra cost to Govt complete all as specified and as directed. |
| 6 | M&L for preparation of newly plastered external surfaces of wall and applying Two or more coats of 100% Premium acrylic emulsion paint (Weather coat) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm (weather proof/weather coat) over and including 1.5mm thick wall care putty without any brush marks on the surface in any colour over including necessary scaffolding up to three storeys height of bldgs,Shade/colour shall be approved by GE, complete all as specified and as directed. |
| 7 | M&L Rendering 5mm thick on fair faces of brick work or concrete surfaces in CM (1:3) in ceiling complete all as specified and as directed. |
| 8 | M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash without any brush marks on the surface including necessary scaffolding up to four storeys height of bldgs if required complete all as specified and as directed. |
| 9 | M&L for complete removal of existing treatment internally surface of wall by scrapping with mechanical wall sander , having RPM not less then 1500 and applying min 1 to 1.50 mm thick wall care putty on the surfaces and making surface absolutely smooth and applying one coat of primer (as per manufacturer’s recommendations) on the surfaces and applying two coats of distemper oil emulsion without any brush marks on the surface in any tint including necessary scaffolding up to four storeys height of bldgs if required ,Shade/colour shall be approved by GE,complete all as specified and as directed. |
| 10 | M&L for complete removal of existing treatment from ceiling surface and applying two coat of white wash on undecorated surfaces without any brush marks on the surface including necessary scaffolding up to four storeys height of bldgs if required complete all as specified and as directed. |
| 11 | M&L RCC type B-1, 1:2:4 using 20mm graded aggregate for Beam, bressummers, lintels, in shelves and the like complete all as specified and directed. |
| 12 | Use & Waste Form work for rough finished surfaces of concrete measured flat for lintel beams, shelves etc finished fair flat surfaces complete all as specified and directed. |
| 13 | M&L for Mild steel TMT bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified and as directed. |
| 14 | S&F steel window/Ventilator factory made out of box type and shutter (double shutter) with sash bar made out of section using flash butt welding, hinges shall be provided to both shutters complete including all fittings including grills, glazing (glass) , guaging (wire mesh) and two coat synthetic enamel paint over a coat of red oxide primer all as per drg No CEPZ/ C- TD/032/13 Sheet 1/2 all as specified and directed by Engr-in-Charge. |
| 15 | M&L Pressed steel frames of section 165 x 60 mm for doors with one or more rebates including supply and fixing lugs, hinges, lock strick plate etc complete all as specified. |
| 16 | M&L for cement concrete type C-0, 1:3:6 using 12.5 mm graded crushed stone aggregate as in back filling of hollow portion of frame with plain cement concrete and for fixing of hold fast complete all as specified and directed. |
| 17 | S&F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, confirming to IS- 2202(Part-I-1999) , ISI Marked complete all as specified and directed |
| 18 | S&F 35mm thick factory made 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats Note: wire cloth shall be measured separately |
| 19 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples or using metal nut and bolts complete all as specified and directed. |
| 20 | Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing) removing serviceable tiles to store and rubbish off the premises and removing the debris outside from defence land complete all as specified and directed . |
| 21 | S&F non skid coloured Ceramic tiles 08mm thick (square/ rectangular) polished, area of each tiles 400 x 400x 8 mm thick in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.Note:-The texture ,colour ,Shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by GE and Rates also including in this item for necessary raking circular cutting or notching and waste on tiles. |
| 22 | S&F non skid coloured Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles 600 x 600 mm x 10 mm thick, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.Note:-The texture ,colour ,Shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by GE and Rates also including in this item for necessary raking circular cutting or notching and waste on tiles. |
| 23 | M&L for coloured Glazed ceramic tiles in vertical surface such as dado etc 450mmX 350mmX 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of the tiles over and including 10mm thick rough cement plaster to receive tiles in CM 1:4 complete all as specified and as directed. Note:-The texture ,colour ,Shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by GE |
| 24 | M&L for non abrasive paving (endura) tiles 300mm x 300mm x8-10mm thick (square/ rectangular) polished, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement over & including 15mm screed bed CM 1:4 to match complete al as specified and directed.Note:-The texture ,colour ,Shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by GE and Rates also including in this item for necessary raking circular cutting or notching and waste on tiles. |
| 25 | S&F sink with drainage board made of stainless steel 1 mm thick with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets of angle iron and connecting union to pipe over all size 915 mm x460 mm and bowl size 410mmx330mmx 160mm complete all as specified and directed. |
| 26 | M&L Stainless steel plate rack(Utensil Rack) of size (900mm x 750mmx250mm ) made out of AISl 304 stainless steel 0.63 mm thick sheet fixed with brass screw of required size including necessary fittings/nuts,bolts & washers complete all as specified and as directed. |
| 27 | M&L 20 mm thick granite (pure black) work (table rubbed and polished) cills, cooking platforms, in steps, jambs, pillars, window-cill and like in cement mortar (1:4) 10mm thick including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of graniteNote : All Open Edges to be Half rounded. |
| 28 | S&F in in repair 15mm Gun -metal,globe or gate valves,with iron wheel head ,screwed both ends for iron pipe and fixed. |
| 29 | S&F in repair 20mm Gun -metal,globe or gate valves,with iron wheel head ,screwed both ends for iron pipe and fixed. |
| 30 | S&F 15mm Fancy type bib taps cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe of 15mm bore, complete all as specified & directed. |
| 31 | S&F in vitreous counter type china wash hand basin, white, flat back of size 22 x 16 x 8 Inchs (excluding taps, waste chain and plug and porcelain stopper) but including brackets suitable for 15mm dia pipe complete all as specified & directed. |
| 32 | S&F in angular valve, 15 mm dia, cast copper alloy, chromium plated, fancy type with long shank and cup, screwed down, high pressure screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified & directed. |
| 33 | S&F stop valves (ISI marked), 15mm dia, cast copper alloy,chromium plated fancy type with long shank and cup(concealed type) screwd down,high pressure with crutch or butter fly handle,screwed both ends for iron pipes or for unions and fixed in pipe all as specified and directed. |
| 34 | S&F in rotational moulded polyethylene water storage tanks 500 liters capacity, (cylindrical, vertical in closed top) hoisted and fixed in position with all fittings all as specified complete all as specified & directed. |
| 35 | S&F in PVC low level flushing cistern of10 ltrs capacity, ISI Marked, white, symphonic action type with inlet, ball valve, float and handle including brackets and PVC flush pipe of 32 mm bore, suitable for low level cistern complete all as specified & directed. |
| 36 | Cutting chase, pining in making good to facings where required and pointing in cement mortar (1:3) to ends, cutting chases for concealed water tubing ror concealed conduit wiring etc and making good cutting not exc 10cm girth. |
| 37 | S&F in 15mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including testing & taking down old tubes complete all as specified & directed |
| 38 | Supply, fix 20 mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including testing & taking down old tubes complete all as specified & directed |
| 39 | S&F in PVC connections of 450mm long suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed. |
| 40 | S&F PVC ball valves, high pressure with polyethylene float and fly nut complete screwed for iron pipe 20mm bore complete all as specified & directed. |
| 41 | S&F in repair pillar taps, fancy type cast copper alloy with capstan heads, chromium plated, screwed down, high pressure with or without lettered “hot” or “cold” with long screwed shanks and fly nut screwed for iron pipe of 15mm bore, complete all as specified & directed. |
| 42 | S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard & railing 60cm long fixed with chromium plated brass screws and wooden/plastic cleats complete all as specified and directed. |
| 43 | S&F corner glass shelf with bracket fixed with chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed by Engineer-in-charge |
| 44 | S&F in PVC Coloured bathroom cabinet looking mirror divided into shelf overall size 622mm x 432mm complete all as specified and as directed by Engr-in-Charge. |
| 45 | S&F Flush pipe of polyethylene of low or high density of PVC, 32 mm dia complete all as specified and as directed by Engineer-in-charge |
| 46 | S&F PVC (SWR) pipes 110 mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed by Engineer-in-charge |
| 47 | S&F PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed by Engineer-in-charge |
| 48 | PVC (SWR), junction single, (Single T) equal or unequal 110 mm bore complete all as specified and as directed by Engineer-in-charge |
| 49 | S&F PVC SWR Bends any radious 110mm complete all as specified and as directed by Engineer-in-charge |
| 50 | S&F in grating doom 100 mm dia of PTMT complete all as specified and as directed by Engineer-in-charge |
| 51 | S&F in repairs 75mm PVC floor trap, ISI marked with cp grating with/without waste pipe hole incl jointing to waste pipe fixed with solvent cement complete all as specified and as directed. |
| 52 | S&F 600mmx450mm fancy type bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers |
| 53 | S&F Tubular towel rail 20mm dia, D type, 60cm long between flanges complete all as specified and as directed by Engineer-in-charge |
| 54 | M&L for 18 to 20 mm thick PVC prelaminated solid board with one side decorative choice laminate and other side balancing white including 3mm thick lipping and equal to thickness of board as in kitchen cabinet, cupboard etc fixed with screws to steel/timber frame work etc complete all as specified and directed. |
| 55 | S&F for Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed. |
| 56 | S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of brass, polished complete all as specified and directed |
| 57 | S&F hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws, Size of hasp and staple in mm 100 complete all as specified and directed. |
| 58 | S & F Continuous (piano) hinges 30mm Width of flaps (when open) ,mild steel, bright finish or electrogalvanised complete all as specified and directed |
| 59 | M & L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer-in-charge |
| 60 | S & F mild steel angles/rectangular hollow section/steel tubular roof trusses (framed), purlines and fastening including distance pieces etc. complete all as specified and directed. |
| 61 | M&L for PCC in foundations, filling and mass-concrete type C-2 (1:3:6) using 40 mm graded crushed stone aggregate for post complete all as specified and directed. |
| 62 | S&F PCC 1:2:4 Type B-1 (using 20mm graded stone aggregates) in plinth coarses, string coarses, copings, kneelerss, kerbs and the like, complete all as specified and directed. |
| 63 | Note:-The accepted amount will be arrived after deducting the Sch of credit i.e. Rs 15600.00 and any other reduction if any from quoted amount. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysOct 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender