Tender For special Repair, Resurfacing Of Internal Roads Of Arty Static Wksp Under Age B/R Haig Lines, Ge Devlali
Tender Value
60.57 Lakhs
Estimated cost
Bid Submission
29 Oct 2026
27 days left
EMD
1.16 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nashik → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair, Resurfacing Of Internal Roads Of Arty Static Wksp Under Age B/R Haig Lines, Ge Devlali
BOQ
| Sl. No. | Item Description |
| 1 | Repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) complete all as specified and directed. |
| 2 | Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exc 400 sqm, exc 50mm and n exc 100 mm deep complete all as specified and directed. |
| 3 | M&L for Laying and compacting 75 mm thick (compacted thickness) Wet Mix Macadam ( WMM) grading as per table 400-13 of MoRTH specification for Road and Bridge works 2013 manufactured in WMM plant, material comprising of clean crushed graded aggregate and granular material premixed with water to a dense mass spreading with sensor paver and rollingwith vibratory roller of capacity 80-100KN static weight and consolidating to required gradient and camber complete all as spd and directed. The finished surface tolerance to be as per Table 900-1 of MoRTH specification complete all as specified and directed. |
| 4 | M&L for preparing on WMM surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally cleaning the surfaces with mechanical compressor to remove all loose dirt etc and applying evenly a prime coat of Cationic Bitumen Emulsion of approved grade SS1 type (packed bitumen emulsion) confirming to IS: 8887-1978 at a rate of application of 8.5 kg/10 sqm on surface of WMM as specified in MoRTH Fifth Revision specification for road and bridge works including cost and carriage of bitumen emulsion and all other incidental cost of work using mechanical sprayer/means complete all as specified and directed. |
| 5 | M&L for preparing on existing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally cleaning the surfaces with mechanical compressor to remove all loose dirt etc and applying evenly a tack coat of Cationic Bitumen Emulsion of approved grade RS1 type (packed bitumen emulsion) conforming to IS: 8887-1978 at a rate of application of 2.5 kg/ 10 sqm on bituminous surface as specified in MoRTH Fifth Revision specification for road and bridge works, using mechanical sprayer/means complete all as specified and directed. |
| 6 | M&L for premixed bituminous macadam laid using mechanical paver for any width of road, rolled & compacted to required gradient and camber (consolidated thickness 75mm or less) with binder content (paving VG - 30 grade bitumen) of min. 4% by weight of total mix complete all as specified and directed. |
| 7 | M&L applying evenly tack coat of Cationic Bitumen Emulsion of approved grade RS1 type (packed bitumen emulsion) conforming to IS: 8887-1978 at a rate of application of 2 kg/ 10 sqm on bituminous surface as specified in MoRTH Fifth Revision specification for road and bridge works, using mechanical sprayer/means complete all as specified and directed. |
| 8 | M&L for premixed bituminous semi-dense asphaltic concrete 30 mm consolidated thickeness laid using mechanical sensor paver for any width of road with max 5% binder content, paving butimen VG-30 grade by weight of total mix, rolled and compacted to required camber and gradient using 8 to 10 tonne power roller complete all as specified and directed. |
| 9 | M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled,rolled and rammed including watering with power roller complete all as specified and directed. |
| 10 | M&L for painting line, dashes, arrow,centre lines, stop lines, dashes, arrows etc. and the like letters etc. on road pavement (parking etc.) providing & applying 2 mm thick road marking strips (reflective) of specified shade /colour using hot thermoplastic material fully / semi-automatic application machine fitted with profile shoe heater driven by experienced operator on road surfaces including preparation of previously treated surfaces , cleaning surfaces of all dirt, scales, oils, grease & foreign materials etc. complete all as specified and directed by Engineer- in- charge. |
| 11 | Supply and fixing in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA strip reflector and fixed with and incl MS stud of suitable size as per manufactures instructions incl chemicals as required complete all as specified and directed. |
| 12 | Supply and fix in repair solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc incl chemicals complete all as specified and directed. |
| 13 | Demolition of stone slabs and tiles/paver laid, bedded and pointed in any mortar of any description or thickness in floors, aprons, walls etc complete all as specified and as as directed. |
| 14 | M&L for Machine pressed precast concrete interlocking paver block 80 mm thickness Rubber moulded shape and size confiming to IS-15658-2021, with M 40 Grade as in floor/pavement laid on 30 mm thick stone dust cushioning laid dry to the profle, and laying as per IS 16777:2019 complete all as specified and as directed |
| 15 | M&L for Nominal Mix Concrete of Grade M 7.5 ( using 40 mm araded agg type 2 ) as in fdn filling and mass concrete/sub base complete all as spd and directed. |
| 16 | M &L for plain cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) Finishing cement concrete surface even and smooth using extra cement for filleting, benching, coping etc slightly rounded or chamfered on edges wherever required including necessary form work /moulds etc complete all as specifed and as directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 27 daysNov 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 34 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender