Tender For Provn Of Sentry Post, Chain Link Fencing And Gate, Modular Kitchen, Realinement Of Rain Gutter, Extension Of Hardstanding And Supply And Installation Of Solar Plant At Various Locations Of Milit Girinagar Pune-25
Tender Value
45.59 Lakhs
Estimated cost
Bid Submission
22 Oct 2026
19 days left
EMD
91500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Sentry Post, Chain Link Fencing And Gate, Modular Kitchen, Realinement Of Rain Gutter, Extension Of Hardstanding And Supply And Installation Of Solar Plant At Various Locations Of Milit Girinagar Pune-25
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in post holes (or similar holes) each n exc 0.50 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft/ disintegrated rock and removing surplus earth work complete all as specified and directed. |
| 2 | M&L for PCC 1:3:6 type C2 (Using 40 mm graded stone agg.) as in foundations,filling or mass concrete or similar work complete all as specified and directed. |
| 3 | Removing excavated material to a distance n.exc 50 m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed |
| 4 | M&L for Non structural steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete, complete all as specified and directed. Confirming to Fe-290 (Gde-165). |
| 5 | S&F Chain link MS galavanised fencing including line wires, of mesh size 50x50x 3mm dia wire including standard rail, straining bolts and binding wire etc complete all as specified and directed . |
| 6 | M&L Mild steel round bars 10mm dia and over, cut to length complete all as specified and dirercted. |
| 7 | M&L Mild steel Flat iron filets (for securing wire mesh ) including all necessary drilling ,bolting or riveting etc and similar work confirming to Fe 290 (Gde -165) complete all as specified and dirercted. |
| 8 | S&F Mild steel screw bolts(machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long and dia of neck 11 to 15 mm complete all as specified and dirercted. |
| 9 | M&L for preparation of new steel Surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamel paint over a coat of primer complete and as directed. |
| 10 | M&L for preparation of new steel Surfaces of any description, exc 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of primer complete and as directed. |
| 11 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out.complete as specified. |
| 12 | M & L hardcore of broken stone or boulders of gauge n.exc.63mm,deposited,spread and levelled in layers n exc. 15 cm thick, watered and well rammed to a true surface complete all as specified and directed. |
| 13 | M&L 75 mm thick PCC 1:4:8 type D2 using 40 mm graded aggregate as in sub base etc complete all as specified and directed. |
| 14 | M&L for Cement concrete type B- 2,1:2:4 (20mm graded aggregate) in 75 mm thickness complete all as specified and directed. |
| 15 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams;and similar work; vertical or to batter complete all as specified and directed. |
| 16 | M&L for Forming 12mm thick Expansion joints filled with pre-formed bituminous fillerand top 30mm primed and sealed with sealing compound,Grade ‘A’ complete all as specified and directed. |
| 17 | Dismantling stone slab of any description or thickness in floors, approns etc complete all as specified and as directed. |
| 18 | M&L machine cut Granite stone slab 18 to 20 mm thick as in cooking platform ,floor,steps, pillars, window cills,and like and incl 10mm thick (avg thickness) cement mortar 1:4 screeding and setting coat in cement mortar 1:2, 3mm thick, with araldite adhesives set and jointed with white cement sturry mixed with pigment to match the shade of slab incl cutting, waste, rubbing and polishing etc complete all as specified and directed.Note:- (i) The rate of granite stone shall be deemed to incl for full rounded off corner/edges incl all cutting to make it square or rectangular. (ii) The rate shall also be deemed to incl for cutting and machine polishing to achive the desired granite finish complete all as specified and directed. |
| 19 | S & F Machine cut cuddappa stone slab one side polished 20 to 25mm thick, set and jointed in neat cement slurry and pointed in coloured cement to match, laid over and including 20mm screed bed in cement mortar (1:6) complete all as specified and directed. |
| 20 | S & F for Modular kitchen cabinet, wardrobe and wall cabinet comprising of with including necessary all other fixing arrangement and screws as per requirement at site etc. All cabinet made of factory made moulded 18mm thick glossy/Matt Finish solid waterproof HD HMR board and outer door and topside shall be of 18mm thick perlam coloured solid HD HMR board, for fixing the items fitted in position and complete all as specified directed by Engr-in-Charge. |
| 21 | S & F 12 mm thick factory made moulded glossy/Matt Finish solid waterproof HD HMR board for kitchen wall cabinet back side & wadrope etc comprising of with including necessary all other fixing arrangement as per requirement at site. For fixing the items fitted in position to walls minimum screws size 120 mm complete all as specified directed by Engr-in-Charge. |
| 22 | M&L for Preparation of old distempered surfaces of wall and applying one coat of oil bound distemper including wall putty works as in cracks, patches etc as required all as specificed and directed. |
| 23 | Material and labour for coloured glazed ceramic tiles of size 450mm x 300mm x 7mm thick as in dado/ skirting of colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 10mm thick backing coat in cement mortar (1:3) complete all as specified and as directed. |
| 24 | S&F stainless steel kitchen sink with drainage board of overall size 915x460mm and bowl size 410x330x160mm with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets complete all as specified and directed.. |
| 25 | S & F stainless steel grill pattern Bottle Rack size 8\\" wide and 20\\" deep including stainless steel channels.Dia of stainless steel bar used to make grill pattern shall be min 5mm complete all as specified directed by Engr-in-Charge. MAKE:- Johnson kitchen, Hafele, Godrej interio and hettich as approved. |
| 26 | S & F stainless steel grill pattern basket of size 21\\"x4\\"x20\\" deep including stainless steel drawer channels. Dia of stainless steel bar used to make grill pattern shall be min 5mm complete all as specified directed by Engr-in-Charge. MAKE:- Johnson kitchen, Hafele, Godrej interio and hettich as approved. |
| 27 | S & F stainless steel Cuttlery Box of size 21\\"x4\\"x20\\" deep with including stainless steel drawer channels. Thickness of stainless steel sheet shall be 1mm thick complete all as specified directed by Engr-in-Charge. MAKE:- Johnson kitchen, Hafele, Godrej interio and hettich as approved. |
| 28 | S & F stainless steel grill pattern Plate rack of size 21\\"x8\\"x20\\" deep with including stainless steel channels of make Hafele, Godrej, Hettich .Dia of stainless steel bar used to make grill pattern shall be min 5mm complete all as specified directed by Engr-in-Charge. MAKE:- Johnson kitchen, Hafele, Godrej interio and hettich as approved. |
| 29 | S & F stainless steel grill pattern Cup and Soucer Rack of size 21\\"x6\\"x20\\" deep with including stainless steel channels. Dia of stainless steel bar used to make grill pattern shall be min 5mm complete all as specified directed by Engr-in-Charge. MAKE:- Johnson kitchen, Hafele, Godrej interio and hettich as approved. |
| 30 | S&F stainless steel grill pattern Grain Trolley with base of size 21\\"x24\\"x20\\" deep and including stainless steel channels. Dia of stainless steel grill shall be minimum 5mm complete all as specified and directed by Engr-in-Charge. MAKE:- Johnson kitchen, Hafele, Godrej interio and hettich as approved. |
| 31 | S&F chromium plated auto hinges split box type overlay door mounting option, opening angle 110 degree fixed, with screw all as specified and directed.Make: Kea SCH or Hettich. |
| 32 | S&F 100 mm long cupboard stainless steel handles fixed with nuts screws and washer complete all as specified and directed. |
| 33 | M&L for Cupboard magnet of size 50mm including high quality magnet and steel plate complete all as specified and directed. Please Enable Macros to View BoQ information |
| 34 | M&L for Cupboard magnet of size 50mm including high quality magnet and steel plate complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysOct 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender