Tender For special Repair To Water Supply Installation, Filtration Plant Including B/R Works At Pal Ur Mil Stn
Tender Value
Ref. Documents
Estimated cost
Bid Submission
22 Oct 2026
11 days left
EMD
77000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kangra → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Water Supply Installation, Filtration Plant Including B/R Works At Pal Ur Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work or stone /boulder masonry, built in CM, incl all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles etc, complete all as specified and as directed. |
| 2 | M&L Brickwork with sub class 'B' (old size) bricks, straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:4 complete all as specified and as directed. |
| 3 | Material & labour for Rendering 10 mm thick CM 1:6 on fair faces of brick or concrete surfaces finished even & smooth without using extra cement complete all as specified and as directed. |
| 4 | M & L for Rendering 15 mm thick in CM 1:4 using water proofing liquid compound as per manufacturer's instructions on other than fair faces brick or concrete surfaces and finishing surfaces even & smooth without using extra cement complete all as specified and directed.Note :- Water proofing liquid compound shall be measured and paid separately. |
| 5 | Preperation of new surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and as directed. |
| 6 | M&L for providing cement concrete type B1 1:2:4 (20 mm graded aggregate) in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60 cm in height, coping, kneelers, appex stones, bed plates, kerb, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, Complete all as specified and directed. |
| 7 | Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams flat for fair finished surfaces of concrete , complete all as specified and directed. |
| 8 | S&F mild rolled section in joist, channel, angle, or tee section fixed independently without connecting plate etc cut to ordinary length it means within 20 mm of length indicated , complete all as specified and as directed.(Gde FE-410 W (Gde-E-250) A Quality. |
| 9 | Providing and fixing galvanised iron wire mesh (GI jali) of 18 SWG( Wire dia 1.22 mm) wire with 25 mm square mesh (Wieght not less than 1.80 Kg per Sqm) including fixed to MS angle frame including necessary welding, cutting, complete all as specified and directed. |
| 10 | Preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zink chrome primer, complete all as specified and as directed. |
| 11 | S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165, complete all as specified and as directed. |
| 12 | S&F butt hinges 100mm, cold rolled medium weight mild steel complete all as specified and as directed. |
| 13 | Providing and carrying out repair to cracks, honeycombed and damaged concrete surfaces using polymer modified non-shrink repair mortar of approved make including preparation of surface by chiselling, cutting V-groove to cracks, removing loose concrete, cleaning with compressed air/water, applying bonding coat, placing and compacting non-shrink repair mortar, finishing smooth, curing complete all as specified and directed. |
| 14 | Providing and carrying out pressure injection grouting to cracks, joints and honeycombed concrete in RCC water retaining structures using single component hydrophilic/hydrophobic polyurethane (PU) injection resin including drilling holes at required spacing, fixing injection packers, flushing with water, pressure injection using suitable pump till refusal, removal of packers, sealing holes with polymer modified mortar and making surface good complete all as specified and directed. |
| 15 | Providing and applying crystalline waterproofing treatment to RCC surfaces of water retaining structures using cementitious crystalline slurry of approved make in two coats over properly prepared and saturated surface including cleaning, surface preparation, application by brush, curing and testing for water tightness complete all as specified and directed. |
| 16 | M&L non skid ceramic coloured tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick in CM 1:6 including dismantling of floor tiling incl cement mortar bedding (but not backing) removing serviceable tiles to a store and rubbish off premises, complete all as specified and directed. |
| 17 | All as per item no16 above item except in walls such as skirting, complete all as specified and directed. |
| 18 | M&L Distempering with 1st quality acrylic distemper (ready mixed ) having VOC content less than 50 gm/litre of approved manufacturer of required shade and colour complete as per manufacturers specification two or more coats over 2mm wall care putty on old surface of wall including preparation of surfaces with complete all as specified and as directed. |
| 19 | Material & Labour for appplying two or more coats of 100 % Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489 :2004, Alkali & fungal resistance dirt resistance exterior paint of required shade ( Company Depot Tinted ) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over old surfaces of wall complete including preparation of surfaces of walls by complete removal of existing treatment complete all as specified and as directed. |
| 20 | Demolition of cement concrete ( unreinforced) in ground floors and pavings n exe 15 cm thickness. Including tiles and screed bed layer if any ( below or above ground level) complete all as specified and as directed. |
| 21 | M&L for broken stone hardcore of guage n exc. 63 mm, deposited ,spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface,complete all as specified and as directed. |
| 22 | 75 mm thick PCC 1:2:4 type B-2(using 40 mm graded crushed stone aggregate ) as in sub base or base course. complete all as specified and as directed. |
| 23 | M&L Chequered colour tiles of size 20 cm x 20 cm x 25 mm thick or equivalent size as in machine pressed set .jointed and pointed in neat cement slurry in floors with grey cement and pigments over and including screed bed 20 mm thick in CM 1:4 complete all as specified and as directed. |
| 24 | 100 mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) in base .complete all as specified and as directed. |
| 25 | Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed. |
| 26 | M&L for Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size conforming to IS-15658-2006 of 60mm thickness, M-35 Grade, complete all as specified and as directed. |
| 27 | M&L for plain cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in roof padding, lintels upto 1.5 m span,coping,fillets,bed plates,plinth courses,seismic bands and the like finished fair and even including necessary formwork complete all as specified and as directed. |
| 28 | Dismantling posts or struts(wood,steel,or RCC) any section , including taking out embedded portion embedded in concrete, brick work, masonry etc and making good disturbed ground. complete all as specified and as directed. |
| 29 | Cement concrete 1:3:6 type C 2 using 40 mm Graded stone aggs as in foundations, filling and mass concrete.complete all as specified and as directed. |
| 30 | Dismantling wrought iron or mild steel work of any description not otherwise provided for .complete all as specified and as directed. |
| 31 | Dismantling timber scantling in fillets, rails, posts, rafters, purlins, etc under 40 sq. cm in section , any position in unframed work.complete all as specified and as directed. |
| 32 | S & F Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc. Fe 410 -W (Gde- E- 250) quality- A complete all as specified and as directed. |
| 33 | S& F Rolled sections as in main and cross beams, hips and jack rafters, purlins where connected to common raftes and running rails and guides for sliding doors fixed with angle cleats or other connecting plates of Gde-E-250 Gde-165, complete all as specified and as directed. |
| 34 | Dismantling of plain or corrugated steel sheeting,any gauge,thickness,including nanital or similar pattern roof covering, M&L pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws. Sheet colour approved by GE, complete all as specified and directed. |
| 35 | Dismantling of plain or corrugated steel sheeting,any gauge,thickness,including nanital or similar pattern roof covering, S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding/ridges to wall, fixed with self tapping screws complete all as specified and directed. |
| 36 | M&L for providing and fxing stainless steel (Gde 304) railing made out of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete , including fixing the railing with neccessary accessories & stainless steel dash fasteners, stainless steel bolts etc of required size on the top of floor or the side of waist slab wth suitable arrangement, complete all as specified and directed. |
| 37 | M&L for Cement concrete type C-2 1:3:6 using 20 mm graded crushed stone aggregate in surface channels and drains etc including necessary formwork. complete all as specified and as directed. |
| 38 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends,complete all as specified and as directed. |
| 39 | M&L for pre cast reinforced cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in landing,cover slab etc including necessary formwork set in cement mortar 1:4 complete all as specified and as directed. |
| 40 | M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.complete all as specified and as directed. |
| 41 | 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) in base .Complete all as specified and directed. |
| 42 | 150 mm thick PCC 1:2:4 type B-2 (using 40 mm graded stone aggregate) in base .Complete all as specified and directed. |
| 43 | Taking down chowkhat or frame with shutter (without taking off shutter from the frame) n exc. 1.50 Sqm each incl taking out hold fast.complete all as specified and as directed. |
| 44 | Taking down chowkhat or frame with shutter (without taking off shutter from the frame) exc. 1.50 Sqm but n exc. 4 Sqm each complete all as specified and as directed. |
| 45 | M&L Plain cement concrete, M-15 (Nominal mix), type B-1 (Using 20mm graded stone aggregates) as in filling of steel chowkats or frames, cills and hold fast etc.complete all as specified and as directed. |
| 46 | M&L Powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joing cleats for fixing etc complete all as specified and as directed. |
| 47 | S & F Anodised aluminium window and ventilator shutters, side hung type without sash bars,, (powder coating of any colour and thickness not less than 50 micron) aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed. |
| 48 | M&L Sheet glass, 4.8 mm thick ordinary quality and glazing with oil putty or in neoprene rubber in aluminium section in square exc 0.5 sqm in each pane complete all as specified and as directed. |
| 49 | S&F Stainless steel wire netting 0.56mm of nominal dia of each wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples.complete all as specified and as directed. |
| 50 | S&F pressed steel frames size 105mm x 60mm for doors with one or more rebates including necessary fixing lung, hings, lock strike plate etc. complete all as specified and as directed. |
| 51 | S&F pressed steel frames for door made out of MS Sheet 1.25mm thick of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and as directed. |
| 52 | S&F 35 mm thick plain framed panelled door shutters of 2nd class hard wood (Factory made) two panel with lock rail and panel of 9mm thick BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 Part-I, Kiln seasoned and chemically pressure treated, fitted to chowkats complete all as specified and as directed. |
| 53 | S&F 35 mm thick 2nd class hard wood plain framed factory made glazed and skelton shutters open rebated and prepared to receive glass/ wire gauge etc (without sas bars)edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for secring glass,etc size of members of shuters as specified in SSR Part-I,Section 8, clause 8.24 (a) complete all as specified and as directed. |
| 54 | M&L for preparation of wooden surfaces of any description exc over 10cm with or grith and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 55 | S&F 125mm size, extruded aluminium alloy handles, fabricated type, anodised.complete all as specified and as directed. |
| 56 | S&F 150mm long aluminium tower bolts (ISI Marked) extruded type complete all as specified and as directed. |
| 57 | S&F 300mm, Mild steel spring for door, ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and as directed. |
| 58 | S&F 300 mm size brass sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and as directed. |
| 59 | Dismantling fencing wire mesh , any type complete all as specified and as directed. |
| 60 | M&L for Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe -290 Gde E-165. complete all as specified and as directed. |
| 61 | Material only for chainlink fencing of MS galvanised wire any type or size .complete all as specified and as directed. |
| 62 | Fixing only chainlink fencing including line wires, any mesh, size and type to any type of standards, rails,straining bolts,etc including provission of binding wire.complete all as specified and as directed. |
| 63 | M & L for Rendering 15 mm thick in two coats i.e. 10mm thick in CM 1:6 and 5mm thick in CM 1:4 using water proofing liquid compound as per manufacturer's instructions on other than fair faces brick or concrete surfaces and finishing surfaces even & smooth without using extra cement including taking down cement plaster on brick or concrete surface and description including raking out joints Hacking for key scrubbing down with water.complete all as specified and as directed. |
| 64 | Supply only liquid water proofing liquid |
| 65 | S&F framed work as in doors or gates of angle iron or other section with gusset plates rails,braces etc complete drilled for fixing of still sheeting coverings,door etc to be preparid for hanging or sliding with and including either hooks and hinges or still hanging door fittings and hanging also and fastening and fixing complete,conforming to grade Fe-290 (Gde-E-165) |
| 66 | S& F 1.25 mm thick Mild steel ,plain, black sheet in wall cladding, steel gates and similar work cut to size, holes punched:, including round head screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seems, including bending or turning up, mitred anglesetc as required . |
| 67 | Taking up or down DI pipe line including all fittings from trenches etc including cleaning by roding for refixing or removing to store for safe custody or disposal under schedule of credit and all as specified for the size 250mm bore complete all as specified and as directed. |
| 68 | All as per item ser No. 67 above but for of size 200 mm bore, complete all as specified and as directed. |
| 69 | All as per item ser No. 67 Above but for of size 150 mm bore, complete all as specified and as directed. |
| 70 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in deep for foundation, taking up/down or laying of GI tubing/CI pipe etc or for shaft, wells, cesspits, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in any type of soil complete all as specified and as directed. |
| 71 | Returning, filling in, (soil) including spreading, levelling, watering and well ramming in layers not exc. 25cm thick in any type of soil, complete all as specified and as directed. |
| 72 | Removal of excavated materials (soil) to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 m above the starting point, complete all as specified and as directed. |
| 73 | Supply, laying, jointing and testing of DI pipe 250 mm bore with flanged type and socket ends, centrifugally cast class K-9 suitable for tyton joints, in any length, laid in trenches/pillars complete all as specified and as directed. |
| 74 | All as per item ser No. 73 above but for of size 200 mm bore, complete all as specified and as directed. |
| 75 | All as per item ser No. 73 above but for of size 150 mm bore, complete all as specified and as directed. |
| 76 | S&F Cast iron sluice valve long body type, both ends flanged and drilled, of size 150mm bore, (ISI marked) conforming to IS-14846 -2000 with pressure rating of PN-1.6 with brass spindle and iron wheel head including jointing material such as nuts, bolts, washers and rubber gasket etc, complete all as specified and as directed. |
| 77 | All as per item ser No. 76 above but for of size 200 mm bore, complete all as specified and as directed. |
| 78 | All as per item ser No. 76 above but for of size 250 mm bore, complete all as specified and as directed. |
| 79 | Material and labour for DI fittings such as bends (any type radius and angle) tapers any type, bends, tee pieces single branch Y junction double branch, cross ( all type socket as spigot and socket etc), collars, caps and plugs suitable for pipes upto 250 mm bore including rubber gasket complete all as specified and as directed. |
| 80 | All as per item ser No. 79 above but for of size 200 mm bore, complete all as specified and as directed. |
| 81 | All as per item ser No.79 above but for of size 150 mm bore, complete all as specified and as directed. |
| 82 | Dismantling of existing brick masonry valve pit 1200 x1200x1200mm including stacking serviceable material for credited to contractor and removal of unserviceable material from site complete all as specified and as directed. |
| 83 | M&L construction of valve pit of inner sizes1200 x1200x1200mm brick masonry construction complete with mild steel sheet cover 3.15 mm thick and angle iron frame of size 40 x 40 x 6mm duly painted with two coats of synthetic enamel paint over a coat of red oxide primer and including locking arrangement and lifting handle all as specified and shown on drawing. All internal surface and external surface upto 15 cm below normal ground level of brick masonry shall be plastered 15mm thick in cement mortar 1:4, finish even and smooth including necessary excavation and earth work in any type of soil and PCC work all as per TD drg complete all as specified and directed. |
| 84 | Supply and fix wall mounting type panel with automatic Star delta starter suitable for 22 KW motor of appropriate size as reqd Each at site with overload relay of range 20-32 Amps, power contrctors of suitable capacity, timer range and single phase preventor, ON/OFF actuators etc with MCCB 100 Amp, 4 Pole, 25 KA as main switch including taking down old un-serviceable panel complete all as specified and directed. |
| 85 | Material and Labour for Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 metre deep below normal ground level) with top edge of plate not less than 1.5 metre below ground level, connecting to galvanised iron strip 32x6 mm size (as earth lead strip), by means of bolt, nuts, check nuts and washer of galvanised and earth wire protected by provision of galvanised iron pipe light grade, 40 mm bore including provn of concrete pit in plain cement concrete M-15 type B-1 using 20mm graded crushed stone aggregates with 40mm thick cover of reinforced cement concrete M-15 reinforced with XPM (weight not less than 4 kg/Sqm) and frame of angle iron 25x25x3mm with lugs 2 Nos and with 6mm dia mild steel bar handle made to shape, galvanised iron medium grade 20mm bore pipe for watering perforated at bottom 1.75 metre long placed on top edge of earth plate, common salt and charcoal filling, test point made out of phosphorous bronze with fixing arrangement, funnel, wire mesh and including earth work in any type of soil, returning filling in and removal of surplus soil to a distance not exceeding 50 metre, all as per electrical plate No. 3 of SSR 2009 Part-I and connection to earth test point all as specified and testing on completion including taking down the U/S earthing. |
| 86 | Cutting of existing 200mm bore cast iron pipe in position to required length for repairs of blockage or insert new CI fitting such as collers, branches,tee etc or pipe complete all as specified and directed. Note:- Excavation and earth work,fittings,pipe etc shall be measured and paid saperately. |
| 87 | Cutting of existing 150mm bore cast iron pipe in position to required length for repairs of blockage or insert new CI fitting such as collers, branches,tee etc or pipe complete all as specified and directed. Note:- Excavation and earth work,fittings,pipe etc shall be measured and paid saperately. |
| 88 | S&F Glow sign boards of size not less than 3.5x3.5 mtr length with 2mm thick MS sheet plain type made out of angle iron channels frame backgorund and station name with high intensity retro reflective sheet letter as specified colour (Blue and white) complete all as specified and as directed. |
| 89 | Supply and installation with testing complete of digital water level indication device, operating on single phase supply direct display in 19mm size (letter display) digital system in meter/CM of water of over head tank ensuring alarm while water fall or rise over predetermined limits with the following description complete all as specified and as directed, including dismantling old unserviceable water level indicator. (a) The entire unit must operate through a compact electronic circuit which must ensure reliable operation at 230V + 10% at 50 Hz + 5%, with reliable display and alarm at low and high level of over head tank. (b) One circuit must be housed in high impact polystyrene molded box with nylon-moulded connection strips. The level system must resistance transducer, while unaffected by corrosion and other contents available in water. The product must be controlled by micro switch. (c) The whole unit must electronically controlled and the upper level and lower level indications must be in two parts. Each complete part must be fitted in MS CRS sheet box separately. One must be installed at over head tank and second at pump house with proper powder coating paint with locking arrangements. water level indicator with rope and float valve including fixing complete all as specified and directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysOct 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender