Tender For Provn Of Reinforced Cement Concrete Hume Pipe, Rainwater Drain And Misc B/R And E/M Works At Necklace Road Complex, Milit Girinagar, Pune- 25
Tender Value
43.64 Lakhs
Estimated cost
Bid Submission
22 Oct 2026
18 days left
EMD
88000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Reinforced Cement Concrete Hume Pipe, Rainwater Drain And Misc B/R And E/M Works At Necklace Road Complex, Milit Girinagar, Pune- 25
BOQ
| Sl. No. | Item Description |
| 1 | M&L for Earth work in excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth of any type of soil lead upto 50 m and lift upto 1.5m, complete all as specified and directed. |
| 2 | M & L for hardcore of gauge not exceeding 63 mm of broken granite stone, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 3 | M&L for PCC (1:4:8) type D2 using 40 mm graded stone aggregate as in fdn , filling & mass concrete complete all as specified and directed. |
| 4 | M&L for sand filling under floors including water and consolidation complete all as specified and directed. |
| 5 | S & F factory made machine pressed precast concrete inter locking paver block any shape any size conforming to IS-15658-2006 of 60mm thickness M-35 grade with grey cement no pigment complete all as specified and directed and as per manufacturer instructions. |
| 6 | M & L for Plain Cement Concrete Type C1, 1:3:6 (using 20 mm graded granite stone aggregate) cast in situ in lintels up to 1.5 M span, cills and other similar bands, plinth courses, parapets, copings, bed plates, bonds and the like including weathering, complete all as specified and as directed |
| 7 | M&L for 15mm thick rendering in CM (1:4) on brick masonary surfaces, finished even and smooth without using extra cement complete all as specified and directed. |
| 8 | M & L Brick work with old size fly ash bricks straight or curved on plan exc 6m in radius built in CM 1:4 complete all as specified and directed. |
| 9 | M&L Non Structural Steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooksand hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete. (cut to ordinary lengths i.e. within 20mm of the length indicated) using Fe 410-W (Gde- E- 250)quality- A painted one shop coat of zinc chromate primer paint (including preparation of surface) at Contractor’s workshop before fabrication complete all as specified and directed. |
| 10 | S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 11 | M & L Preparation of new or previously untreated steel surface of any discription over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of redoxide primer complete all as specified and directed. |
| 12 | M & L Reinforced concrete pipes, class NP3 450 mm dia confirming to I.S. laid and jointed with including collars complete all as specified and as directed |
| 13 | M & L for Concrete bed to drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested; in for 450mm hume pipes using cement conrete 1:3:6 type C2 complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysOct 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender