Tender For special Repair To Bldg No T-04 (Otm) Of Grc And Bldg No P-1 Jcos Mess Of 54 Coy Asc (Sup) Type C In The Area Of Age B/R-Ii Under Ge (West) Jabalpur
Tender Value
48.28 Lakhs
Estimated cost
Bid Submission
21 Oct 2026
17 days left
EMD
96560
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jabalpur → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Bldg No T-04 (Otm) Of Grc And Bldg No P-1 Jcos Mess Of 54 Coy Asc (Sup) Type C In The Area Of Age B/R-Ii Under Ge (West) Jabalpur
BOQ
| Sl. No. | Item Description |
| 1 | Taking down shutter exc 1.0 sqm but n exc 2.0 sqm each of any description complete all as specified and directed by Engr-in-charge |
| 2 | Taking down Chowkhats or frames,wooden door/PVC door/steel window,ventilator not exc. 1.5 sq. m each,any description complete all as specified and directed by Engr-in-charge |
| 3 | Taking down Chowkhats or frames wooden door/windows exc 1.5 sqm but not exc.4.0 sq. m each,any description complete all as specified and directed by Engr-in-charge |
| 4 | S & F Pressed steel frames made of 1.25 mm thick MS Sheet size 125x60mm for doors, with single rebates including necessary fixing lugs, hinges, lock strike plate etc, M & L for providing PCC 1:2:4 type B0 (using 12.5mm graded stone agg) to fill the frame & making good complete all as specified & directed by Engr-in-Charge. |
| 5 | S&F factory made plain framed ,35 mm Panelled shutter (three Panel) with lock rail of 9 mm B.W.P. commercial ply or 12 mm veneered patticle board with commercial veneering on both face , the size of rail and stile as per IS: 1003 (Part 1) kiln seasoned and chemically pressure treated complete all as specified and directed by Engr-in-charge |
| 6 | M&L for 35mm thick factory made second class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed by Engr-in-charge |
| 7 | S & F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tacks or galvanised wire staples complete all as specified and directed by Engr-in-charge |
| 8 | S & FS&F Solid PVC Double door frame of size 50mm x 95mm made out of 5mm Plain colour PVC sheet reinforced with M.S. tube, suppling & fixing in opening as per specification & drawing as per specification & drawing shown on Page No. 160 of SSR 2010 part II. |
| 9 | S&F Factory Made Solid PVC double Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 5mm thick Moulded PVC Sheet on the front face & 5mm thick plain colour PVC sheet on back face, with MS square tube along the frame with wood free EPS supplying & fixing in frame at site as per specification & drawing all as specified and directed by Engr-in-Charge. |
| 10 | S&F aluminium powder coated window sliding type (3 track), 1.5mm thickness of frame and shutter with two glass shutter and one mesh shutter including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading screws with and including 4mm thick plain float glass and 0.36mm dia apperture 1.4mm SS wire mesh and fittings etc and making good the jambs and painting with existing surface matching, complete all as specified and directed by Engr-in-Charge |
| 11 | S&F aluminium powder coated louvered ventilators of 1.50mm thick frame including 5mm thick frosted glass fixed in half portion & adjustable type louvers in another half and stainless steel wire mesh fixed type on outside frame etc. making good the jambs and painting with existing surface matching, complete all as specified and directed by Engr-in-Charge |
| 12 | S&F aluminium alloy anodized sliding door bolt with hasp, staples (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts or extruded sections or cast aluminium alloy length of bolt 250mm complete all as specified and directed by Engr-in-charge. |
| 13 | S&F Butt hinges stainless steel 100 mm long complete. |
| 14 | S&F Aluminium anodised barrel tower bolts of extruded section 200mm long complete, |
| 15 | S&F and in repair Aluminium handles cast type anodised of 150mm complete. |
| 16 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises |
| 17 | M&L non skid coloured ceramic tiles 300x300/400x400 mm x 7mm thick,in floors set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in CM 1:6, complete all as specified. |
| 18 | M&Lnon skid coloured digital ceramic tiles size of tiles 450x350/300x600x7mm thick vertical surface such as in skirting/dado etc over and including 10 mm thick cement plaster in CM 1:4,, all as specified and directed. |
| 19 | M&L Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering in cement mortar (1:4) |
| 20 | M & L Non Skid ceramic Coloured tiles 7 to 8 mm thick ( square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layer of mortar with CM 1:4 complete all as specified and directed. |
| 21 | Demolition of brick /stone walls built in cement mortar incl all quoins, arches, pillars etc, but excluding ashler facings, dressed stonework and precast concrete articles |
| 22 | M&L Brick work using old size bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6, complete all as specified and directed. |
| 23 | Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets |
| 24 | Supply and fix in repairs E-board 'Everest' make 600x600x4mm thick white prelaminated sett embosed reinforced designer ceiling board tiles of approved texture at all height laid on hot dipped galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white, the frame work shall comprise of main runner made from 0.33mm thick GS sheet and of size 24x32x3000mm and spaced at 1200mm centers securely fixed to the structural soffits by approved hangers at 1200mm maximum centers, hangers of GI wire 2mm dia to be fixed by approved rawl plug, level and justers and screws etc., the last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall, flush fitting of 1200mm long cross tee (with double stitching) to be interlocked between main runners at 600mm center to form 1200x600mm modules cross tee longer than 600mm to be supported independently. 600x600mm modules to be formed by fitting 600mm long cross Tee centrally between the 1200mm cross tee. Tee, Perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour all as per manufacturer instructions, including taking down wall/ceiling boards(fibre, pulp insulation etc) or inslutation boards any thickness including fillets complete all as specified and as directed. |
| 25 | Taking down steel tubing and connections including cleaning for refixing or removal form site for 25 t0 32 mm bore pipe all as specified and directed by Engr-in-charge. |
| 26 | Taking down steel tubing and connections including cleaning for refixing or removal form site for 20mm bore pipe all as specified and directed by Engr-in-charge. |
| 27 | Supply & laying of CPVC pipes 25 mm Outer dia, SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors ,complete all as specified and directed |
| 28 | Supply & laying of CPVC pipes 20 mm Outer dia, SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors complete all as specified and directed |
| 29 | M &L for preparation of new wooden surfaces of any description not otherwise described over 10cm width or girth and applyinbg two coat of synthetic enamel paint any tint over pink primer all as specified and directed. |
| 30 | M &L for preparation of new steel surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint of any tint all as specified and directed. |
| 31 | M &L for preparation of old painted wooden surfaces of any description not otherwise described over 10cm width or girth and applyinbg one coat of synthetic enamel paint any tint all as specified and directed. |
| 32 | M &L for preparation of old painted steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint of any tint all as specified and directed. |
| 33 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed |
| 34 | M&L for rendering 10mm thick on fair faces of brick or concrete surfaces of wall in CM 1:6,complete all as specified and directed by Engineer-in-Charge. |
| 35 | Material and labour for 15mm thick cemet plalster in CM 1:4 over wall / concrete surfaces finished even and smooth without using extra cement and using WPC 3% ,at any height, complete all as specified and directed by Engineer-in-Charge. Note WPC will be measured seprately |
| 36 | M & L for preparation of old plasterd surfaces of wall, complete all as specified and directed |
| 37 | M & L for preparation of new plasterd surfaces of wall, complete all as specified and directed |
| 38 | M&L for 1 mm thick wall care putty on wall,complete all as specified and directed |
| 39 | M&L for 1 coat Oil emulsion distemper on wall, complete all as specified and directed |
| 40 | M&L for subsequent coat Oil emulsion distemper on wall, complete all as specified and directed |
| 41 | M & L surfaces applying one coats of cement base paint complete all as specified |
| 42 | M & L for applying subsequent coats of cement base paint complete all as specified |
| 43 | S & F for vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe)including all necessary fittings, fixed in repairs complete. |
| 44 | S&F in rep Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) with trap, complete all as specified. |
| 45 | S & F in repairs PVC High/Low level flushing cistern 10 litres capacity including all fittings i.e float valve, syphon, flushpipe, brackets all as specified and directed by EIC. |
| 46 | S&F in repair vitreous china wash basin white flat back size 580x450 and brackets, complete all as specified and directed by Engr-in-charge. |
| 47 | S&F in repair,15 mm dia Pillar taps, cast copper alloy, with capstan heads, fancy type chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed |
| 48 | S & F in repair bib taps cast copper alloy CP with butterfly handle screwed down screwed for iron pipe or for brass ferrule 15mm bore dia all as specified and directed by EIC. |
| 49 | S & F in repair stop valves/angle cock cast copper alloy CP fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe 15mm bore dia all as specified and directed. |
| 50 | S&F in repair PVC floor trap square type with CP grating with or without hole including provision of jointing to waste pipes in run lead joint dia of outlet 75 mm, complete all as specified. |
| 51 | S&F in repairs PVC connections 15mm dia with brass nut on both ends and washers 450mm long all as specified and directed. |
| 52 | S&F in repairs for Towel Rail 600mm long of PTMT fixed with Towel Rail 600mm long of PTMT fixed with screws and wooden/plastic cleats (Minimum weight 190gms) complete all as specified and directed . |
| 53 | S&F in repairs600mmx450mm bevelled edge mirror of selected quality glass, mounted on 5.5 mm thick PVC frame or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers all as specified and directed by EIC. |
| 54 | Taking down of eves gutter,rain water pipes of any size or pattern including all fittings etc complete all as specified and directed. |
| 55 | S&F, PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in walls |
| 56 | S&F, PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in walls |
| 57 | S&F PVC (SWR) bends ISI marked any radius of 110 mm bore with access door complete all as specified and directed. |
| 58 | S & F PVC (SWR) bends any radius, 75 mm bore |
| 59 | PVC (SWR) 110mm bore 'T' equal or unequal complete all as specified and directed. |
| 60 | S&F PVC (SWR) junction single, (single T) equal or un equal of 75 mm bore of pipe complete all as specified and directed. |
| 61 | PVC (SWR) floor trap / Nahani trap with grating 75 mm dia incl jointing with solvent cement complete all as specified and directed. |
| 62 | Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same |
| 63 | Demolition of cement concrete (unreinforced) in ground floor or pavings n exc 15 cm thickness (below or above ground level) |
| 64 | M & L for 25 mm thick PCC 1:2:4 type B-0 using 12.5mm crushed stone aggregate as in leveling course Iincluding demolition of existing PCC complete all as specified and as directed. |
| 65 | S&F in Repair 15 mm bore Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed with complete accessories complete all as specified and directed . |
| 66 | S&F in repair plastic water closet seat, white/black closet pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device. |
| 67 | Supply only Integral water proofing compound all as spefied and directed. |
| 68 | M&L for applying two coat of distemper oil emulsion averaging minimum 2mm thick birla white wall care putty over a coat of alkali resistant cement based primer on wall/ceiling surfaces & smoothening the surfaces with sand papers etc., including complete removal of existing treatment of any description (such as OBD/ plastic emulsion/ interior/ exterior emulsion paint etc) before applying OBD on new/old surafaces all as specified and directed. |
| 69 | Material & Labour for preparation new/old plastered surfaces and walls including cornices, pilasters etc and applying two coats of cement base paint over a coat of white cement primer complete all as specified and as directed. |
| 70 | M&L Brickwork with subclass 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in CM (1:4) and as directed. |
| 71 | S & F in repair Factory mde signel extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frmes/ Chowkat of size 65 x 100mm comprising of visign PVC polymer of K vlue 58-60 (Suspension Grade), clcium carbonate and naturalfibers (wood powder/rice hisk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threded star headed SS screws having minimum frame density of 750 Kg/ cum, screw withdrawal strength of 2200N (Face) & 1100N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class category with property of being termite/borer proof water /moisture proof and fire retardant and fixed in position with MS hold fast/lugs /SS dash fasteners of reqd dia and length complete as per direction of Engineer-in-Charge (MS hold fast/lugs or SS dash fasteners shall be paid for separately) Note: For WPC solid door/window frames minus 5mm tolerance in dimension i.e depth and width of profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made Make: Rajshree or equivelent |
| 72 | S & F in repair Factory mde signel extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frmes/ Chowkat of size 125 x 65 mm comprising of visign PVC polymer of K vlue 58-60 (Suspension Grade), clcium carbonate and naturalfibers (wood powder/rice hisk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threded star headed SS screws having minimum frame density of 750 Kg/ cum, screw withdrawal strength of 2200N (Face) & 1100N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class category with property of being termite/borer proof water /moisture proof and fire retardant and fixed in position with MS hold fast/lugs /SS dash fasteners of reqd dia and length complete as per direction of Engineer-in-Charge (MS hold fast/lugs or SS dash fasteners shall be paid for separately) Note: For WPC solid door/window frames minus 5mm tolerance in dimension ie depth and width of profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made Make: Rajshree or equivelent |
| 73 | S & F in repair 35 mm thick WPC Door including making good after complete as directed as speicifed Make : Rajshree or equivelent |
| 74 | S & F in repair Door spring ordinary rat tail rod pattern springs including roller and roller plate complete of mild steel 300 mm long complete. |
| 75 | S&F anodised aluminium window and ventilator shutters,side hung type without sash bars,aluminium sections 0.55kg/m including necessary joining cleats,glazing clips,ruber neoprene packing,anodised alumium snap beading screws,anodised aluminium fittings such as peg stays 150mm long(1No.).hinges type B-21 100mm long2No suitable handle 1No complete all as specified with powder coating of any colour(thickness or powder coating not less than 50 micron) |
| 76 | Supply & Fixing 'in repair' 18 mm thick, PVC sheet one side 1mm prefemlaminated of approved texture (\\"Celuca ply of Rajshree make or equivalent in \\"Sintex\\" as approved by GE ) as in Kitchen cabinet (withshelves and partitions) inas per manuacturer's instructions complete all as specified & directed. |
| 77 | Supply & Fixing 'in repair' 18 mm thick, PVC sheet one side prelaminated of approved texture (\\"Celuca ply of Rajshree make or equivalent in \\"Sintex\\" as approved by GE ) as in cupboard (withshelves and partitions) as per manuacturer's instructions complete all as specified & directed. |
| 78 | S&F in repair stainless steel kitchen basket in various type of basket plain basket height 4'' Thali basket 8\\" height Cup saucer 4\\" height and performance cultlury basket 4'' height all as specified and directed. |
| 79 | S&F in repair hattich channel for basket sizes 600mm long and 46mm wide all as specified and directed. |
| 80 | S&F in repair stainless stell handle for basket size 6'' all as specified and directed. |
| 81 | S&F in repair stainless steel auto closing concealed hinges 9.5 crancks for half overlay doors with opening angle 95*(14-32mm) with adjustment 4mm complete all as specified Make: Godrej/Hettich |
| 82 | S&F Aluminium, anodised, barrel tower bolts 150mm long of extruded section. |
| 83 | S&F in repair Curtain dropary 25 mm dia PVC Coating mild steel fancy type rod of fancy type including brass and brackets with curtain rings of approved quality etc complete. |
| 84 | M&L for complete removal of existing treatment on wall and applying two coat of oil bound distemper over a coat of alkali resistance primer over a coat of wall care putty (to an average thickness of 2mm )thick including necessary scaffolding arrangement as required at site all as specified and directed. |
| 85 | M&L for complete removal of existing surface of wall and applying two coats of cement base paint, over a coat of white cement primer complete all as specified and directed.. |
| 86 | M & L for PCC 1:2:4 type B1 using 20 mm graded aggregate as in bed block/hold fast blocks, padding, chajjas repair, benching and coping etc with & including necessary form work for fair faces of concrete, complete all as specified and directed |
| 87 | M&L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including jointing with solvent, grinding, rounding to edges and polishing complete |
| 88 | M&L for plain Cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) in sub basefilling and mass concrete all as specified and directed |
| 89 | M&L for 75 mm thick plinth protection in/Subbase PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) complete all as specified and directed. |
| 90 | M&L double charged Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, Double tiles charged tiles in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over & including 15 mm thick screed bed in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of floor complete all as specified and directed |
| 91 | ditto- all as per item above but in skirting laid over and including 10 mm thick plaster in CM 1:4 complete all as specified & directed. |
| 92 | M&L 25mm thick PCC type B-1, (1:2:4) using 20mm graded stone aggregate finishing cement concrete surface even and rough complete all as specified and directed. |
| 93 | S&F in repairs Vitreous China wash basin, white, flat back, size 550x400mm excluding taps, waste chain & plug & porcelain stopper but including brackets |
| 94 | S&F Grating doom 100 mm dia of PTMT (min. weight 25 gms) |
| 95 | S&F in repairs Vireous china wash down water closet pan(pedestal pattern),white(excluding fixing bolts, flushing cistern and flush pipe) with Plastic water closet seat black,closed pattern with flat bottom and, cover and mild steel chromium plated or aluminium hinging device and wash down water closet(pedestal pattern) complete as specified |
| 96 | 3 mm thick sheet frosted glass and glazing with oil putty or fixed with bead / glazing pins in squares size n.exc 0.5 sqm in each pane all as specified and directed. |
| 97 | Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors |
| 98 | Along the external wall below concrete or masonry apron using chemical emulsion@ 2.25 litres per linear metre including drilling and plugging holes etc. in apron |
| 99 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations |
| 100 | S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm (Make Nirali ModelOlympia or equivalent of Prayag) |
| 101 | S&F in repairs Brass CP shower rose 125mm size |
| 102 | S&F Aluminium anodised Tubular towel rail 20mm dia, D type, 60cm long between flanges incl bracket etc. fixed in repair. |
| 103 | S & F Solid PVC Wall Lining consisting of 5mm thick single side Prelam PVC sheet used inclusive of solvent cement & fixing at site on PVC frame as per specification & drawing |
| 104 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification & drawing |
| 105 | M&L glazed ceramic coloured tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match incl rendering 10 mm thick in CM (1:6) and finished rough, complete all as spd & directed. |
| 106 | Taking down carefully any type point wiring (light, fan, socket bell or power) , complete with fitting such as switches ceiling roses,lamp holders sockets,regulators,call bell light fitting with PVC conduit surface /concealed or wooden pattens including sunken cast iron /pressed steel terminal boxes etc and making good the disturbed surfaces of walls, roof, floors etc to match with the existing surfaces all as specified and directed by Engineer in charge. |
| 107 | Taking down carefully Main switch and Distribution boards any make and size . |
| 108 | Taking down the ceiling fan/ Exhaust Fan in situ and submitting to MES store complete all as specified and directed. |
| 109 | Taking down the ceiling fan in situ and refixing after servicing, repairing and painting to ceiling fan including scratching old paint and preparation of surface for painting with one coat of white/grey enameled paint complete all as specified and directed. |
| 110 | Taking down carefully Old unserviceable any type sub main wiring with wooden batten/PVC surface conduit of any size and making good the disturbed surfaces of walls, roof, floors etc to match with the existing surfaces complete all as specified and directed by Engineer in charge. |
| 111 | M/L for Sub Main Wiring two single core PVC insulated copper conductor FRLSH cable of size 6.0 Sqmm multistranded copper conductor two run drawing into and including concealed rigid non-metallic PVC conduit, medium grade not less than 25mm dia with all conduit fitting,fixing accessories and one run of 6.0 Sqmm multistrand copper conductor cable as continuous earth wire complete all as specified and directed by Engineer in charge Note :-Two Nos of 6.0 Sqmm Wire and one No of 6.0 Sqmm Earth wire in One RM length Measured as one unit length. |
| 112 | M/L for Sub Main Wiring with two single core PVC insulated copper conductor FRLSH cable of size 4.0 Sqmm multistranded copper conductor drawing into and including concealed rigid non-metallic PVC conduit, medium grade not less than 20mm dia with all conduit fitting,fixing accessories and 4.00 Sqmm multistrand copper conductor cable as continuous earth wire complete all as specified and directed by Engineer in charge Note :- Two Nos of 4.00 Sqmm Wire and One No of 4.0 Sqmm Earth wire in One RM length Measured as one unit length. |
| 113 | Material & Labour for point wiring with three layer PVC Insulated 1.5 Sqmm multi-strand copper conductor FRLSH cable 1100 Volts grade drawn into and concealed PVC conduits medium grade not less than 20mm( ISI marked) including all fitting and fixing accessories including 1.25 mm thick sunken pressed steel terminal boxes/Modular metal flush box duly painted with two coats of anti-corrosive paint outside and two coats of aluminium paint inside with and including 3mm thick hylam brand laminated white bakelite sheet cover for mounting switches, sockets, fan regulators fixed with CP screws with cup wahsers and PVC insulated 1.5 Sqmm multi-strand copper conductor cable as earth wire and making good the disturbed surfaces with cement sand mortar 1:3 to match with the existing surfaces complete all as specified & directed by Engineer-in-charge |
| 114 | (a) One light point/Bell point controlled by one switch. |
| 115 | (b) One fan point controlled by one switch. |
| 116 | (c) One socket point controlled by one switch on same board. |
| 117 | (d) One socket point controlled by one switch on Independent board. |
| 118 | Description all as per item above here in befor but with 1100 volts grade copper standard conductor cable of size 2.5 Sqmm with 2.5 Sqmm solid copper conductor PVC for 3 pin switch socket outlet15 Amp independent board complete all as specified and directed by Engineer in charge . |
| 119 | S & F in replacement of bell ding dong AC 230 volts single pole one way complete all as specified and directed by Engineer in charge. |
| 120 | S & F in replacement of Switch piano flush type AC 230 volts 5 Amps single pole one way complete all as specified and directed by Engineer in charge. |
| 121 | S & F in replacement of Socket outlet 3 pin, 5 Amps and AC 230 volts flush type complete all as specified and directed by Engineer in charge |
| 122 | S & F in repair for switch socket combination 5 in 1 Pin 5 / 16 Amps AC 230 volts flush type complete all as specified and directed by Engineer in charge |
| 123 | S & F in replacement of Ceiling rose surface bakelite 65 mm x50 mm three terminal AC 230 volts flush type complete all as specified and directed by Engineer in charge |
| 124 | S & F in replacement of fan regulator Step type of polycarbonate complete all as specified and directed by Engineer in charge. |
| 125 | S & F in replacement of Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings including 9 watt led lamp complete all as specified and as directed by Engineer in charge. |
| 126 | S & F in repair Smart bright Batten Series, LED luminaire using LEDs 22 watt 110 LM/watt with diffuser which ensures uniform distribution and comfort batten series features latest LEDs and delivers consistent light output, stable color start Extruded Aluminum housing, Energy efficient, Flicker free start Inbuilt driver unit Suitable for wall and ceiling mounting using brackets complete all as specified and as directed. |
| 127 | S & F in repair of LED Decorative /mirror light fitting 10 watt diffuser which ensures uniform distribution and comfort batten series features latest LEDs and delivers consistent light output, stable color start Extruded Aluminum housing, Energy efficient, Flicker free start Inbuilt driver unit Suitable for wall and ceiling mounting using brackets complete with all accessories internally pre-wired and including round wood block, connecting up with three core flexible flexible copper conductor cable suitable size complete all as specified and directed by Engineer in charge. |
| 128 | S & F in replacement of Bulk head endura LED light fitting complete with10 watt LED and making necessary electric connection to ceiling rose with copper conductor of suitable size & length complete all as specified & directed. |
| 129 | Supply & fix in replacement of LED Security Light Luminaire 25 watt 6000K with .high power LED cool white,CRI 75,+/- 5% supply voltage 220/240/50 Hz, light engine driver base.pole adapter,powder coated pressure die cast aluminium with heat resistant toughened glass with lens type,GI pipe 40 mm dia medium Grade not less than with 1.2 m.long in any shape with 2 nos of pole fitting clamps made out of MS flat , nuts and bolts and painting with aluminium paint. complete all as specified and as directed. make Havells Cat Part No LHDAUU7PA7J025 or equivalent in philips or bajaj or suriya |
| 130 | S&F IN repair LED light fitting square 57x57 CM Not less than 36 watt along with fixture Recessed mounting LED luminaries with diffuser channel Luminaires ers, connector block, etc . Complete with all accessories internally pre-wired and including round wood block, connecting up with three core flexible flexible copper conductor cable suitable size complete all as specified and directed by Engineer in charge. Make: Philips cat part no: RC375B LED 36S/840 PSU W60 L660 S2 WH or equiv in luker/Havells |
| 131 | S & F Exhaust fan heavy duty size sweep 450 mm sweep, 230 v, 50 Hz , complete with louvers including making holes and making good the disturbed surface complete all as specified and directed by Engineer in-charge. |
| 132 | S & F in repair Sheet metal enclosure DBs Tripple Pole and Neutral 4 way with 200 Amps rated bus bar 240 volts single pole and neutral complete double door complete all as specified and directed by Engineer in charge |
| 133 | S & F in repair MCB TPN 415 volts 63 Amps, C Series complete all as specified and directed by Engineer in charge . |
| 134 | S & F in repair Sheet metal enclosure DBs Single Pole and Neutral 8 way with 200 Amps rated bus bar 240 volts single pole and neutral complete double door complete all as specified and directed by Engineer in charge |
| 135 | Supply and fixing in replacement MCB single pole and neutral 240 volts 40 Amps, B Series complete all as specified and directed by Engineer in charge |
| 136 | Supply and fixing in replacement MCB single pole 240 volts upto 40 Amps, B Series complete all as specified and directed by Engineer in charge |
| 137 | Supply & Fixing in repair single pole and netural sheet metal enclosure with a two pin and earth plug and socket complete with 01 number single pole MCB 20 Amps complete all as specified & directed. |
| 138 | Earthing complete with galvanised steel earth plate electrode 60 cm x60 cm x 6 mm thick buried directly in ground ,(Earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level ,connected to and including galvanised iron earth wire 4 mm dia by means of nut, bolts, check nuts and washers of galvanised iron or steel complete all as specified and directed including testing on completion including the material and labour of the following : - (a) Excavation and earth work for drilling hole for electrode in any type of Soil. -1, reinforced with welded steel wire fabric weighing not less than1.87 Kg/ Sq meter. (c) Funnel with watering pipe of GI 20 mm nominal bore light grade and lugs etc complete all as specified and directed (d) 15 mm nominal bore medium grade GI protection pipe 5 meter long for protection of earthing lead complete all as specified and directed. (e) Requisite quantity of common salt and charcoal. (f) Testing of earthing. |
| 139 | Supply , laying and testsilng cable XLPE insulated , screened, PVC bedded , galvanized , steel strip or wire armoured, electric power cab les ( Heavy duty ) 1100 volts grade with stranded aluminium conductor of size 3.5 core 35 Sqmm complete all as specified and directed by Engineer in charge |
| 140 | Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, for laying of pipe, cable etc or n. exc.10 Sqm on plan and n. exc. 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in soft /loose type of soil complete all as specified and directed. |
| 141 | M/L for Returning , filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed. |
| 142 | M/L for Removing excavated material n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and as directed. |
| 143 | Supply,laying & fixing double wall corrugated (DWC) pipes made of high density polythethyline (HDPE) with all accessories i.e. all type of joints,Sockets,Elbows,bends and End caps etc with all as required and specified as directed by Engr in Charge.of size 50 mm outer dia and 38 mm inner dia of |
| 144 | Supply and laying Sand cushioning to under ground cable in trenches/existing cable trenches/ducts in layers of 8 cm deep before laying the cable and 15 cm deep after laying and stretching the cable complete all as specified and directed by Engr in charge. |
| 145 | Supply and laying Brick covering with width equal to length of brick as mechanical protection to cable with well burnt sub class ‘B’ bricks laid dry flat complete all as specified and directed by Engr in charge. |
| 146 | Supply and fixing in replacement of decorative wall light fitting WITH LAMPS 9 WATT made up of Polycarbonate , City-1 , Cylindrical shape , complete with fixing arrangements on wall all as specified and directed. Make:City 1 of havells or equivalent in bajaj ,philips |
| 147 | Supply & fix LED Security Light Luminaire 35 watt not less than 130 Lumens/watt 6000K with IP66 or more .high power LED cool white,CRI 75,+/- 5% supply voltage 220/240/50 Hz, light engine driver base.pole adapter,powder coated pressure die cast aluminium with heat resistant lens type,GI pipe 40 mm dia medium Grade not less than with 1.2 m.long in any shape with 2 nos of pole fitting clamps made out of MS flat , nuts and bolts and painting with aluminium paint. complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 148 | Supply & fix LED Security Light Luminaire 35 watt not less than 130 Lumens/watt 6000K with IP66 or more .high power LED cool white,CRI 75,+/- 5% supply voltage 220/240/50 Hz, light engine driver base.pole adapter,powder coated pressure die cast aluminium with heat resistant lens type,GI pipe 40 mm dia medium Grade not less than with 1.2 m.long in any shape with 2 nos of pole fitting clamps made out of MS flat , nuts and bolts and painting with aluminium paint. complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysOct 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender