Defence Statutory Bodies & Commissions/Committees Closing in 0 days TDR #57831916

Tender For Repair/Replacement Of Modular Kitchen Cabinats, Cupboard Shutters And Other Connected B/R Works In Highrise Residential Bldgs Under Cell No 2 Of Ge (Nw) Nofra , Colaba, Mumbai.

Issued by Statutory Bodies & Commissions/Committees · Mumbai, Maharashtra
Tender Value
49.90 Lakhs
Estimated cost
Bid Submission
26 Oct 2026
0 days left
EMD
99800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Repair/Replacement Of Modular Kitchen Cabinats, Cupboard Shutters And Other Connected B/R Works In Highrise Residential Bldgs Under Cell No 2 Of Ge (Nw) Nofra , Colaba, Mumbai.

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 19-Oct-2026 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 26-Oct-2026

BOQ

Name of Work:- Repair/replacement of Modular Kitchen cabinats, cupboard shutters and other connected B/R works in highrise residential Bldgs under Cell No 2 of GE (NW) Nofra , Colaba, Mumbai.
Sl. No. Item Description
1Note: (1) Contractors/Venders shall be responsible for providing the all safety measures equipment and scaffolding at site wherever require as per site requirement. The cost of the same shall be deemed in coated rate/amount only. There is no extra payment will be made by the dept. for the same.
2Dismantling floor, hearth or wall tiling (fixed at any portion but not backing) including cement mortar bedding and removing rubbish of the premises (outside MD land) complete all as specified and directed.
3M & L for non-skid coloured ceramic tiles 7mm to 8mm thick (square or rectangular) area of each tile exceedimg 0.11Sqm but not exceeding 0.18Sqm, in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in CM(1:6), complete all as specified and directed.
4M&L for Glazed ceramic tiles coloured of size 450X 300X 7mm laid on vertical surface such as dado/skirting over cement mortar backing coat, set jointed in neat cement slurry and pointed in white or coloured cement including 15mm thick backing coat in CM 1:4, complete all as specified.
5Taking down shutters of any description exc 1 sqm and not exc 2sqm each and refixing in the same opening after easing and adjusting.
6Taking up or down 15mm bore steel tubing and connections, complete all as specified and directed
7S&F 20mm dia GI pipes SDR 11 & Plain CPVC SDR 11 fittings concealed on walls/ceiling or laying in floors including fixing of pipes in wall with clamps complete all as specified.
8S&F in repairs Sink Cock with swinging Spout (wall Mounted Model) Cat Part No.ARI-CHR-39347S of Jaquar or of equivalent in Parryware or Hindware as approved fancy type chromium plated suitable for 15mm dia bore pipe with fittings and complete all as specified and directed.
9Dismantling stone slabs and tiles of any description or thickness in floors laid bedded and pointed in any mortar, complete all as specified.
10M&L for 18-20 mm thick Granite slab (of any type and colour as approved by GE) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms (with provn of gas pipe hole), mounte sink/Wash hand basin over including bedding layer of 20mm thick in cement mortar (1:4) for laying floor finishes including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.
11Dismantling of boarding any description fixed in any position with screws.
12S&F in repair of Modular kitchen cabinet (Size will be as Per site requirement) with following specifications complete all as shown on drawing of Modular kitchen and approved by GE : (a) 18mm thick Marine plywood, grade BWP (IS:710), type BB with both side 1mm thick decorative choice laminate type 1 of surface finish, colour and pattern as approved, as in front and shutters with aluminium profile handles.(b) Carcass made up of combination of 0.50mm (body panels) and 1.20mm thick (Horizontal stiffener & leg channels), epoxy poylster powder coating with dry film and shelves made up of 0.50mm thick galvanised steel shelves.(c) Grossery Kit : Taiming Tranquil Solid Drawer 175mm, 304 grade stainless steel wire basket 525MM, 2 Drawer solid Tranquil Drarwers 350MM each, Dish Kit : 175mm Tranquil Drawer, 175mm cup and saucer wire basket , 350MM Wire Basket, Thali Holder 350MM, 200MM bottle pull out 2 layer utility of 304 Garde Stainless Steel. Wicker basket unit 450MM cane wood , undermount soft closing channels, weight bearing capacity of 35Kg each.(d) Hetich hinges with CED coating for extended edge bending of 2mm thick, corrosion resistance. Legs : Hetich make PVC legs with adjustable heights. Hardware & Screws made upof stainless steel.(e) Skirting : 100mm Rehau make PVC Co-extruded skirting in metallic silver color or as approved.Make : Godrej/ Sleek/ Kutchina as approved by accepting officer. Product compliant of ISO 14001/ISO 45001/ISO 50001 & IGBC Greenpro.[Note: - The Contractor may visit the site before quoting the rate of item each job.]
13S&F in repairs 18/19 mm thick Block boards, grade 2 quality, interior grade, with decorative face veneer on both side with decorative choice lamination as approved by GE fixed with screws to timber frame work including 6mm thick teak wood beading all around complete all as specified and directed.
14S&F in repairs 125mm long fancy type extruded brass handles, fabricated type fixed with nut screw and washer complete all as specified and directed.
15S&F in repairs plastic body Magnetic catcher with iron plate to be fixed with shutters of kitchen cabinet approved pattern and shape fixed with screws on wooden/ plywood surfaces all as specified and directed.
16S&F in repairs 100mm stainless steel butt hinges medium weight fixed with Stainless Steel Screws etc. complete all as specified and as directed.
17Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water, complete all as specified.
18M&L for Rendering 15mm thick cement plaster in cement mortor 1:6 on brick or concrete surfaces in patches, surfaces to be finished even and smooth without using extra cement, complete all as specified.
19Material and labour, rendering 10mm thick plaster in cement mortar (1:3), on brick/concrete surfaces of facia, facade,roof ceiling and chajja etc finished even and fair without using extra cement, including taking down old plaster complete all as specified and directd.
20M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat primer on 1 to 2 mm thick wall care putty all as specified and directed.
21M&L for preparation of old plastered surface of wall and applying one coats of oil bound distemper, all as specified and directed.
22M&L for preparation of old plastered surfaces of celing and apply two coats of oil bound distemper over and including 1mm thick wall care putty complete all as specified and directed.
23M & L for preparation of old painted steel surfaces over 10cm width or girth as in support of loft tank and applying one coats of synthetic enamel paint, complete all as specified and directed.
24S&F in repairs of 38mm dia PVC (flexible) waste pipe 900 mm long complete.
25S&F in repairs 75mmdia bore cast iron(Sand cast) soil, waste and vent pipes in any length with or without ears, with cement joints, fixing floors/trenches ,complete all as specified and directed.
26M & L for cast iron floor trap,75mm dia of out let,ISI marked, with mild steel cromium plated grating, including jointing to waste pipe in plain cement concrete(1:2:4) type B-1,as in repairs, complete all as specified and directed.
27Supply and fix, grating 125mm dia (Minimum weight 40 gms) with or without waste hole of PTMT fixed on floor/nahani trap with cement mortar, fixed in repairs, complete all as specified and directed.
28M & L for 6mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work as in kitchen cabinat / cupbord and similar work fixed in repair ect complete all as specified and as directed.
29M & L for 12mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work as in kitchen cabinat / cupbord and similar work fixed in repars ect complete all as specified and as directed.
30S & F 0.9mm thick Sunmica of choice coloure / pattern as in kitchen cabinates , cupboard / wardrobes etc and fixed with high quality adhesive after preparation and cleaning the surfces of the substrate etc complete all as specified and directed by Engr-in-Charge.
31S&F Telescopy channels,power coated with ball bearings,suitable for sliding SS kitchen bracket 60 cm long long standard width,fixed over 2nd class hard Wood rectangular fillet sectional area exc 3 & n exc 6 sqcm, clean swan secured with screws and the fillets fixed on cuddapah stone with screws ,all as specified and directed.
32M & L for 12mm thick Medium density fibre board, exterior grade, fixed to timber framework with screws as in kitchen cabinet shutters/drawers etc complete all as specified and as directed by Engr-in-Charge.
33S & F in repairs kitchen plate racks made of rust resistant stainless steel of 1mm thick with provision of 8 to 15 vertical slots measures roughly of size 450mm x 600mm , of rust -proof electro polished or lacqer-sealed for water exposure , fixed with screws on wall etc complete all as specified and as directed by Engr-in-Charge.
34M & L for 12mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice amination & other side balancing white lamination, fixed with screws to timber frame works as in repairs cupboard shutters, kitchen cabinet drawers etc complete all as specified and as directed. Please Enable Macros to View BoQ information
35M & L for 12mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice amination & other side balancing white lamination, fixed with screws to timber frame works as in repairs cupboard shutters, kitchen cabinet drawers etc complete all as specified and as directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 57831916
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 49.90 Lakhs
LAST DATE 26-10-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Repair/Replacement Of Modular Kitchen Cabinats, Cupboard Shutters And Other Connected B/R Works In Highrise Residential Bldgs Under Cell No 2 Of Ge (Nw) Nofra , Colaba, Mumbai.
Basic Detail
Tender No GE (NW) NOFRA 8573
Bidding Type Tender
Location
City Mumbai
State Maharashtra
Key Dates
Publish Date 19 Oct 2026
Submission Date 26 Oct 2026
Open Date 28 Oct 2026
Finance
Tender Value 49.90 Lakhs
Tender Fee 500
EMD 99800
Exemption Not Available
Document List
50326422-dfec-413e-8af1-3cceba9f2db3.html
BOQ_888176.xls
Tendernotice_1.pdf
tenderpages8573.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Oct 19, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Oct 26, 2026
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Today
Oct 26, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Today
Oct 28, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 2 days

Tender Documents

Download All (ZIP) ↓
html

50326422-dfec-413e-8af1-3cceba9f2db3.html

xls

BOQ_888176.xls

pdf

Tendernotice_1.pdf

pdf

tenderpages8573.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender