Tender For Repairs & Civil Maintenance To Lh Tower, Allied Building, Lift Tower, And Compound Wall Etc., At Kanyakumari Lighthouse.
Tender Value
21.94 Lakhs
Estimated cost
Bid Submission
14 Oct 2026
10 days left
EMD
43892
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kanniyakumari → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs & Civil Maintenance To Lh Tower, Allied Building, Lift Tower, And Compound Wall Etc., At Kanyakumari Lighthouse.
BOQ
| Sl. No. | Item Description |
| 1 | Finishing two coats with Anti algal weather proof emulsion (Exterior paint of reputed brand and manufacturer preferably apex ultima of asian paints 0068) of approved brand or its equivalent (Asian/ ICI-Dulux/ Berger), 1st quality and shade exposed surfaces of compound walls and roof projections of office buildings, store rooms, Power House buildings etc. at all heights to give an even shade after thoroughly brushing the surface with sand paper, wire brushes/ scrappers to remove all dirt’s, spots, loose pieces of scales/ softened mortar drops, cleaning with fresh water, preparation of surface with filling the holes by applying putty etc. wherever required including supply of all materials, labours, tools, scaffoldings etc. complete as directed by the engineer in charge.All as directed |
| 2 | Finishing two coats Interior emulsion (Interior grade paint of reputed brand and manufacturer preferably apex ultima of asian paints 0068) of approved brand or its equivalent (Asian/ ICI-Dulux/ Berger), 1st quality and shade exposed surfaces of office buildings, store rooms, Power House buildings etc. at all heights to give an even shade after thoroughly brushing the surface with sand paper, wire brushes/ scrappers to remove all dirt’s, spots, loose pieces of scales/ softened mortar drops, cleaning with fresh water, preparation of surface with filling the holes by applying putty etc. wherever required including supply of all materials, labours, tools, scaffoldings etc. complete as directed by the engineer in charge.All as directed |
| 3 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. |
| 4 | Providing and laying in position of reinforced cement concrete with 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) including laying, compacting, curing complete with all materials, tools, labours etc. as directed by the engineer in charge but excluding the cost of formwork and reinforcement. All as directed |
| 5 | All Works up to Plinth Level |
| 6 | Centering and shuttering including strutting, propping etc. and removal of form work including cost of all materials, Tools & Plants, labour charges etc. complete as directed by the engineer in charge.All as directed |
| 7 | Providing Steel reinforcement (Thermo-Mechanically Treated bars) of Fe 500 grade for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. All as directed |
| 8 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge.Concealed Internal work, including cutting chases and making good the wall etc as directed including supply of all materials, labours, tools etc. complete as directed by the engineer in charge. All as directed |
| 9 | 25 mm dia nominal outer dia pipes |
| 10 | 32 mm dia nominal outer dia pipes |
| 11 | 40 mm nominal dia Pipes |
| 12 | Providing and fixing water supply fittings and specials of approved quality as per the following items including all labour, materials etc complete and specials should be of ISI make and approved quality. All as directed |
| 13 | Providing and fixing 15mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. |
| 14 | Providing and fixing 15mm nominal bore C.P. Angle cock and Pillar cock of approved quality conforming to IS standards |
| 15 | PVC elbow of 110mm dia. |
| 16 | PVC Tee of 110mm dia. |
| 17 | Providing and fixing bath room fittings like Mirror,Towel rail, Soap dishtray including cost of supply of all materials, labours,Screws and tools and all other charges etc., complete. All as directed |
| 18 | 600x450 mm beveled edge mirror of superiorglass (of approved quality) complete with 6 mm thick |
| 19 | CP Brass 15 mm two Way Tap with Health Faucet Set |
| 20 | Supplying, fabrication & fixing of stainless steel (Grade of 304) handrailing height of 900 mm from floor this includes main vertical post dia of 50.8mm, top railing of 42.4 mm dia , intermediate support post of 38.10 mm dia pipe welded with 15 mm dia pipe and inter mediate runner of 20mm dia pipe, pipe wall thickness of 1.5mm grouted with out damaging the adjacent structure with approved epoxy over steps and floors , with all required fixtures of approved first quality as per drawing enclosed and as directed. The work Including supply of all labours, materials, fabrication, cutting, bending welding, fine polishing( mirror finish), fine finishing the joints, transportation, & fixing, tools & plants and all other charges etc complete. All as directed |
| 21 | Rewedging ,cramping,joinery of doors with new wedges in glue or white lead and repairing including rehanging or refixing of shutters, hinges or pivots etc as directed.etc, Supply of all materials, labour, tools etc complete. All as directed |
| 22 | Painting two coats with 1st qauality Synthetic Enamel Paint over previously painted Steel and wood based surfaces of doors, windows, ventilators etc. with Synthetic Enamel paint of approved brand ( Asian/ Berger/ ICI Dulux ) and colour to give an even shade including cleaning of all dirt, dust and other foreign matter, sand papering and cleaning the surface including supply of all materials, labours, tools etc complete as directed by the engineer in charge. All as directed (Doors, Windows, Ventilators, Cafeteria, Kerb walls etc..,) |
| 23 | Replacement of unserviceable/broken fittings of doors windows, Ventilators, Cupboards of shutters and as wherever directed with new aluminium fittings (Heavy duty) fitted with brass screws, including removing damaged fitting and Disposing unserviceable materials from the site etc, supply of all materials, labours, tools, etc. including removing the shutters and reapiring and refixing complete.All as directed |
| 24 | Repalcement of 100 mm S.S.Butt hinges (Heavy duty):- |
| 25 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even Two or more coats on existing wall surface. Including work of supply of all materials, labours, tools, rope,cradle, ladders, scaffolding etc. complete. All as directed (Inside LH Tower) |
| 26 | Painting to lighthouse tower to the exterior on existing painted surface with Two or more coats of Synthetic enamel paint of approved 1st quality and colour of approved brand of Asian/Berger in alternate band in Lighthouse tower at all height after scrapping and cleaning the worn out paint as and including applying one coat of premier wherever directed, etc complete and as per the direction of Engineer-in- charge. supply of all materials, labours, tools, rope,cradle, ladders, etc. complete. All as directed (Outside LH Tower) |
| 27 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to Ten story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineerin-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. For lift tower outside allround for sealent filling and other required works etc., complete. All as directed (For outside LH tower and Lift tower) |
| 28 | Finishing with epoxy paint (Two or more coats) at all heights/location and prepared and applied as per manufacture's specification including appropriate priming coat, preparation of surface, etc, complete.Supply of all materials, labours, tools & Plants, Transportation, Scaffolding etc., compelete. (Steel structures of Lift tower - inside) |
| 29 | Providing and fixing factory made UPVC glazed/wire mesh windows/doors comprising of lead free UPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, UPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/ mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of UPVC profiles to be as per design approved by Engineer-in-Charge.All as directed |
| 30 | Providing and fixing Structural Mild Steel L Angle steel work riveted, bolting, welded with 12 mm thick stiffner plate, 20mm dia studs as per drawing enclosed , framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as directed including supply of all materials, labours, tools etc. complete as directed by the engineer in charge. All as directed (Bio - Toilet steps and fencing posts repairs and replacing) |
| 31 | Providing and fixing 50 mm G.I. pipes hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. all complete as directed including supply of all materials, labours, tools etc. complete as directed by the engineer in charge. All as directed (LH tower Top and all round balcony) |
| 32 | Providing & fixing at all heights, levels and locations Mill finish aluminium alloy roofing sheets of alloy IS designation 31500, temper Hx8 conforming to IS 737 and dimensions as per IS code 2676 with characteristics of good formability and corrosion resistance. The profile sheets shall be fixed to truss members in slope or required pitch or curvature with Hex cap headed self drilling/tapping Stainless steel screws M6, 50 mm long with 3 mm EPDM seal washer etc. all inclusive of labour, scaffolding, T&P and sundries etc. complete as per directions of the Engineer-In-Charge. (Cost of truss/frame work shall be paid separately). 2mm (for corrugated roof sheets) All as directed (For Bio - Toilet removing old wornout sheet and replacing new one) |
| 33 | 0.56 mm, Aluminium troughed profile with center to center pitch of 200 mm, depth of 32 mm, overall profile width1092 mm, cover width 1000mm. |
| 34 | Dismantling barbed wire or flexible wire rope in fencing including making rolls and stacking within 50 metres lead. |
| 35 | Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with 6 rows of G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per metre cost of total length of barbed wire used. All as directed |
| 36 | Replacing the existing broken glass panes with new glass panes 4mm thick including removing the broken glass panes and beadings and replacing of teak wood wooden beadings to the doors & windows, cost inclusive of all materials, labours, tools & plants, transportation and all other charges etc., complete. All as directed (LH tower landing elevation glass panes at all heights) |
| 37 | Providing & Applying weather proof sealant on inner joints of approved make conforming to IS & directed by Engineer-in-charge. Sealant 25mmx10mm at joints cost inclusive of all Masking tape and Scaffolding, hire charges etc. materials, labours, tools & plants, transportation and all other charges etc., complete. All as directed (Inside Lift tower) |
| 38 | Providing & Applying weather proof sealant on outer joints of approved make conforming to IS & directed by Engineer-in-charge. Sealant 25mmx10mm at joints cost inclusive of all Masking tape and hire charges etc. materials, labours, tools & plants, transportation and all other charges etc., complete. All as directed (Outside Lift tower and LH tower all round balcony ACP gladding) |
| 39 | Cleaning of 12mm thick toughned glass gladding of Lift tower alround from bottom to top level upto +36.00M by using cleaning materials of soap solution and other required materials, tools and plants, labour, transportation etc.., complete all as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysOct 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender