Tender For Constructon Of Pump Room Including D-Tank At Bullachak 8 Tubewell In Suchetgarh Constituency Of Jammu District Under Ut Capex Budget 2026-27
Tender Value
6.31 Lakhs
Estimated cost
Bid Submission
15 Oct 2026
13 days left
EMD
12622
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Constructon Of Pump Room Including D-Tank At Bullachak 8 Tubewell In Suchetgarh Constituency Of Jammu District Under Ut Capex Budget 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides andramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed All kinds of soil |
| 2 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 4 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in. |
| 5 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 6 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1.5:3 mix |
| 7 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 8 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete. |
| 9 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 30x6mm for diagonal braces and central cross piece. |
| 10 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level . |
| 11 | Providing & laying damp-proof Course 40 mm thick with cement concrete 1:2:4. |
| 12 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). |
| 13 | Centering and shuttering including strutting,propping etc and removal of form forFoundation, footing, basis of columns etc, for mass concrete |
| 14 | Centering and shuttering including strutting,propping etc and removal of form work for.Walls (any thickness) including attached plasters, buttresses, plinthi and string courses etc. |
| 15 | Centering and shuttering including strutting,propping etc and removal of form for Lintel, Beams, plinth beams, girders, bressumers and cantilevers. |
| 16 | Centering and shuttering including strutting,propping etc and removal of form for slab |
| 17 | Centering and shuttering including strutting,propping etc and removal of form for Edges of Slab & breaks in floors and walls under 20 cm wide |
| 18 | Providing 12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 Coarse sand) |
| 19 | Providing 15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 coarse sand) |
| 20 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete. |
| 21 | Filling of available earth in foundation and plinth Qty. vide item 1=40.16 cum@40% |
| 22 | Dumping / filling of stones on level including supply. |
| 23 | Interior finishing white washing with lime to give an even shade on New Work (three or more coats) |
| 24 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work |
| 25 | Exterior finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) |
| 26 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength confirming to IS:4454 part-1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover |
| 27 | Providing and fixing ball bearing for rolling shutters |
| 28 | Half brick masnory with common burnt clay (non-modular) brick of class designation 7.5 in foundation and plinth including curing in: cement mortar 1:4 (1 cement : 4 coarse sand) |
| 29 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement: 3 fine sand) as per standard design. In 75x75mm deep chase. |
| 30 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20 mm nominal size stone aggregate. |
| 31 | Lettering with black japan paint of approved brand and manufacture. |
| 32 | Structural steel work in single section , fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 100 mm x 200mm (Steel Girder of size ISMB200) |
| 33 | Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.(i) Single socketed pipes 110 mm diametre |
| 34 | Carriage of sand and bajri av 25 km by MT |
| 35 | Carriage of stones av 26 km by MT |
| 36 | Carriage of bricks av 24 km by MT Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysOct 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender