Tender For Improvement Works To The Anganwadi Centre At Ichipatti Colony In Ward No 68, Central Zone Roc No. 7552/2026/D2c
Tender Value
10 Lakhs
Estimated cost
Bid Submission
12 Oct 2026
0 days left
EMD
10000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Coimbatore → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Improvement Works To The Anganwadi Centre At Ichipatti Colony In Ward No 68, Central Zone Roc No. 7552/2026/D2c
BOQ
| Sl. No. | Item Description |
| 1 | EARTHWORK Excavation for foundation in all soils and to full depth as my be directed except in rock requiring blasting, but inclusive of shoring, strutting and baling out water wherever necessary and refilling the sides of foundation with standard specifications. |
| 2 | Random rubble masonry in cement motor 1:5 (one cement, Five Crushed Stone M- Sand)) mix using all granite stones and bond stones for foundation and basement from approved quarry including watering, curing, and labour charges etc., completed as per standard specification |
| 3 | Plain CEMENT CONCRETE 1:4:8 (One Cement, four m.sand and eight aggregate) using 40 mm gauge hard broken granite stone jelly for FOUNDATION including dewatering if found necessary and laid in layers of not more than 15 cm thick, complying with standard specification. |
| 4 | Supply and Fabrication of RTS Rods in Various Dia. Including Cutting, Bending and Tying with all Labour Charges Etc., Complete. |
| 5 | Supplying and erecting SHUTTERING including necessary supports for plane surfaces in foundation and in all floors for PLINTH BEAMS, STAIRCASE STEPS etc., using mild steel sheets of suitable size and BG 10 stiffened with welded mild steel etc., |
| 6 | Supplying and Erecting and centering shuttering for sides and sofits of plain surface such as Rcc slab rectangular , T beam lintel , bed blocks, staircase waist slab , etc. including strutting shuttering , and remaining same etc. complete as per drawing |
| 7 | REINFORCED CEMENT CONCRETE 1:1.1/2::3 (One Cement, One and half sand and three aggregate) using 20 mm gauge hard broken granite stone jelly for FOUNDATION and BASEMENT including laying consolidating finishing curing etc complete complying with standard speification. |
| 8 | Supplying and filling in foundation and basement with Well Gravel in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification. |
| 9 | Fly ash BRICKWORK in cement mortar 1:5 (One cement and five sand) using second class table moulded chamber burnt bricks of size 23 x 11 cm x 7 cm for the following including curing etc., complete complying with standard specifications |
| 10 | Supply and fixing of M.S.Angle and Grills including one coat of red oxide paint etc. Complete |
| 11 | Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick laid in-situ and pointed with same coloured etc., complete. |
| 12 | PLASTERING with cement mortar 1:3 (One cement and three m.Sand) 10mm thick in all floors complying with standard specifications. |
| 13 | PLASTERING with cement mortar 1:5 (One cement and Five Sand) 12mm thick in all floors complying with standard specifications. |
| 14 | Dadoing the walls from the floor level colour glazed tile of size 30cm x 20cm x 6mm of approved quality in CM 1:2 12mm thick and pointing with the same colour cement suitable for the tiles etc., complete |
| 15 | Supplying and laying Rubberised interlocking Paver block M40 grade Providing and laying of 63mm thick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with sand cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, sand cushion 150mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification |
| 16 | Supply and run of 2 of 1.5 Sq.mm (22/0.3) PVC insulated SC Unsheathed CU.Condutor of 1100V on 3/20 GI bearer Wire in pvc rigid pipe concealed in wall and cealing with continious earthwire connection of 14 SWG TC wire and making good for concealed portion with suitable colour for Runof Mains. SD 55 |
| 17 | Plain CEMENT CONCRETE 1:2:4 (One Cement, two m.sand and four aggregate) using 20 mm gauge hard broken granite stone jelly including dewatering if found necessary and laid in layers of not more than 15 cm thick, complying with standard specification. |
| 18 | Wiring with 2 x 1.5 sq.mm. PVC insulated SC unsheathed copper cable of 1100 V grade with suitable rigid pipe on walls & ceiling for concealed light / fan point |
| 19 | Wiring with 2 x 1.5 sq. mm insulated SC unsheathed cu. Conductor of 1100 V grade with suitable PVC rigid pipe on walls & ceiling for concealed plug point |
| 20 | Wiring with 2 x 4 sq. mm insulated SC unsheathed cu. Conductor of 1100 V grade with suitable PVC rigid pipe on walls & ceiling for concealed power plug point |
| 21 | Supply and fixing TNEB Metre Board suitable for 32A single phase service connection with 32A fuse unit(500V) with frame work of size 2 feet x 1.50 feet using angle iron of size .50x1.50x1.25 feet fixed on wall covered with hylem sheet of size 2 feet x 1.25 feet of 12mm thickness with nessary bolts and nuts supports and supply and fixing of 3 Nos 100A fues units (500 V 2 No Netural Copper earth flat of size 1\\"x1/4\\" with inter connection of EB metre to fuse units by 7/16 PVC copper wire with earth connection completed(SD 126) |
| 22 | Supply and run of 2 of 6 Sq.mm (84/0.3) PVC insulated SC Unsheathed CU.Condutor of 1100V on 7/20 GI bearer Wire for service connection Mains.sd no 66 |
| 23 | Supply and fixing of WT bulk head fitting with guard suitable with 7W / 9W LED bulb (SD 84) |
| 24 | Painting with plastic emulsion paint in two coats over a base coat of Primer in approved colour and quality etc., complete. |
| 25 | Painting with enamel paint two coats over a base coat of approved colour etc complete - For Iron works |
| 26 | Supplying and fixing of 1200mm(48\\")sweep AC ceiling fan complete with stepped electronic 300W Regulator with 1 metre down rod with fan clamp with side plates and crpss arm of size 450mm(16\\") |
| 27 | Supply and fixing of 300 mm Sweep Exhaust fan with stepped electronic 300 W regulator with 1m down rod with fan clamp with side plates and cross arms of size 450 mm. sd 114 |
| 28 | Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the hutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, securityprotective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work |
| 29 | Supply and fixing of single box type 4\\"40W flu fitting completed with copper choke and condensor,with condult pipe suspension from the ceiling with PVC unsheathed Copper leads from terminals to the fitting with Tube. |
| 30 | Supply and Fixing of 30W LED Street light Fitting with necessary Bowl and Bracket and Bulp as per Standard Quality as per the Direction of the Departmental officers etc., complete. |
| 31 | Providing Putty work over plastered Wall using 1 st Class POP putty of approved Quality as per the Direction of the Departmental officers etc., Complete. |
| 32 | Supplying and fixing in position of FRB DOOR SHUTTERS using 19 gauge 19 mm MS sq tubes for styles and outer frames. 15mm MS square tubes for top,lock and bottom rails.The steel tubes shall be covered with 5mm thick solid PVC sheets.shutter usingetc. |
| 33 | Providing Ellis pattern flooring with chips including all labour Charges as per the Direction of the Departmental officers Etc., Complete. |
| 34 | Supply and fixing of RCC circuler ring with labour charges etc., complete as per the direction of departmental offiers |
| 35 | Supply and fixing of Ornamental design wooden Doors with high quality wood (country) with 2” minimum to 7” maximum thick Ornamental Frames, 2” thick to 5” thick Kamala (Flower Planks), Creeper, Birds, Animal Figures, Sculptures, etc. Backside 1” thick to 3” plank including necessary carving, shaping, wastage, etc., as per approved plan and design. |
| 36 | Earthing as per the ISI specification with an earth electrode of 1 1mt class B GI pipe of dia not less then 40mm with copper earth plate of size 125mmx50mmx6mm, with necessary funneling arrangements with necessary masonery work and with 38mm RCC cover slab for the brick masonry (SD 233) |
| 37 | Supplying and fixing in position of Indian make white water closet of size in 580mm * 440mm weight glassed earthan ware of approved with P Trap (or) S Trap and foot rest and filling all round the closet using 20mm broken brick jally in 10cm thick and plaster in c.m. 1:3 12 mm thick including fixing in position leveling complete with necessary connection as per standard specification |
| 38 | Lipped Mouth Porcelin Flat Back Urinal tub with all accessories such as 32mm dia Bell mouth PVC connection, 15mm dia G.M. wheel value, 15mm dia 'B' Class G.I. waste water pipe, 15mm dia nylon connection, 15 mm dia brass nipple etc., |
| 39 | Supply and fixing of 8way single pole and neutral MCB sheet steel enclosure distribution board with double door(metal)1No.32A DP MCB as incoming and 6Nos. 6A to 32A SP MCB outgoing in flush with wall and making good of the concealed portion with earth connection only.The MCB DB and MCB's should be with ISI mark (likestandardmake) |
| 40 | Supplying, Deliverying and fixing of 1HP monoblock open well pump AS PER IS 9079/ 2002 should be with ISI markincluding all labour charges as per direction of dept officers etc complete WD-M1555 |
| 41 | Supply and delivery and fixing of HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc. complete, WD-M1418 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender