Tender For Providing Galvalume Sheet Roof Shed For Two Wheeler Parking Construction Of Compound Wall And Front Gate Arrangements In Staff Quarter At Arulmigu Subramaniyaswamy Temple Chennimalai Perundurai Tk Erode Dt 638051
Tender Value
Ref. Documents
Estimated cost
Bid Submission
16 Oct 2026
13 days left
EMD
22000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Erode → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Galvalume Sheet Roof Shed For Two Wheeler Parking Construction Of Compound Wall And Front Gate Arrangements In Staff Quarter At Arulmigu Subramaniyaswamy Temple Chennimalai Perundurai Tk Erode Dt 638051
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork excavation for foundation in all soils and sub soils and to full depth as may be directed except in, Hard rock requiring blasting, but inclusive of shoring, strutting and baling out water wherever necessary and refilling the sides of foundation with excavated earth in layers of not more than 15cm thick, well rammed watered consolidated and depositing the surplus earth within the compound in places as shown by the departmental officers with an initial lead, and lift etc., complete complying with standard specifications. ( Narrow foundation) |
| 2 | Supplying and filling in foundation and basement with M sand in layers of not more than 15cm.thick well rammed watered and compactedetc., complete complying with standard specification. |
| 3 | Providing and laying Plain Cement concrete 1:5:10 (one cement Five M sand & Ten HBGS jelly) using 40mm HBGS jelly including dewatering by bailing/pumping wherever necessary laying the concrete in layers not more than 15 cm thick and in bays with all leads and lifts, compacting and finishing the surface, watering, curing etc.,complete complying with standard specifications and as directed by the departmental officers for Foundation works. |
| 4 | Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, Sill slabs etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid with silver oak joists of size 10cm x 5cm & 7.5cm x 5cm as support runner , vertical stiffener,side support and Top Horizontal stiffener spaced at about 60cm to 90cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid). |
| 5 | Supplying and erecting steel centering including necessary supports For plane surfaces such as rectangular or square RCC columns etc. which require only nominal strutting using mild steel sheets made of 10 gauge thick welded with MS angle size 40mm x 40mm x 5 mm and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick).etc..complete in all floors complying with standard specifcation. Steel Adjustable telescopic props shall be provided as directed by the departmental Officers. (Payment for centering shall be given after the concrete is laid). |
| 6 | Brick work in Cement Mortar 1:6 ( One cement and six M sand) using II class ground moulded chamber burnt bricks of size 9\\"x4-1/2\\"x3\\" for Super structure including curing etc.,complete complying with standard specification. |
| 7 | Foundation & Basement |
| 8 | Super structure |
| 9 | Brick masonry Cement Mortar 1:4 using Country bricks including all varivargams, moulds,sthambams, mukapathrams, koodu, nasi and all ornamental brick work complete, all pancharams, agarais, karnakoodus, etc., forming core walls of Rajagopuram/ Vimanams complete including cost and conveyance of all materials including cement, all the labour charges including marking pathies shaping of the bricks, lifting of all the materials to required heights, curing and all extra for working in heights etc., complete 100 cft for vimanam / gopuram |
| 10 | Providing and laying Plain Cement concrete 1:2:4 (one cement Two M sand & Four HBGS jelly) using 20mm HBGS jelly including finishing the surface, watering, curing etc.,complete complying with standard specifications and as directed by the departmental officers for Foundation works. |
| 11 | Providing Vargapoochu over the corewalls of Vimanams / Gopurams, with Cement Mortar 1:4 complete including shaping the ukhapathram, mahanasi, Koodu all ornamentals works to proper shape by embedding broken bricks of shaped/chiseled bricks, roughplastering with Cement Mortar1:4and finishing with final ornamental plastering and nayam theervai including cost and conveyance of all materials, labour therefore, lifting of materials, all working in heights, curing with water etc, complete including all extra for folding and including clearing from the vimanams/gopurams 100sft superficial area for kalkaram |
| 12 | Providing and laying in position, standardised concrete Mix M-20 Grade by insitu machine mix concrete adopting weighing batch method in accordance with IS 456 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 Cu.m) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 Cu.m) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m) 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials). |
| 13 | Below Foundation up to 1.50m |
| 14 | Above Ground Level |
| 15 | Supply and fabricating of steel required for all RCC works involced in the schedule including cost of steel ,cost of fabrication,labour charges for cleaning the rods straightening, cutting, bending,tying grills including over lapping to the required length wheenever necessary and placing reinforcement in position as specified in the drawing including cost of binding wire provision for spacer bar cover blocks and all other incidental charges etc., directed by the departmental officers. |
| 16 | Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 17 | White washing two coats using freshly burnt white shell lime in all floors. Including cost of lime blue powder, fevical type gum brushes, scaffolding charges etc., complete complying with standard specifications. |
| 18 | Painting two coats of newly plastered wall surface with ready mixed plastic exterior emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification. |
| 19 | Painting new iron works such as steel steel members & Grill works with one coat of red oxide priming coat and two coats of best approved first quality and colour of synthetic enamel paint in all floors complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 20 | Providing, erecting and fixing of All steel members Using Steel rectangular hollow section for compound wall grill ,Executive officers quarters Roof portionand Front Gate as per approved drawing. All steel fabrication works & All welding works are strictly followed in IS code as mention in the approved drawing. The cost includes cost of all materials, process charges like gas cutting, welding, machining, scaffolding charges, labour charges for dismantling, loading, lifting, unloading, transport, erection, labour charges for equipments like crane, chain pulley block, power charges from generator, risk allowance for working at a height of more than 3m, conveyance to site and clearing them after completion of work complete and as directed by the departmental officers. |
| 21 | Supplying , fixing and roofing with colour galvalume sheet of 0.47mm thick with allnecessary accessories such as J/V bolt and nuts of suitable length with suitablebitumen washers complete complying with standard specification and as directed bythe departmental officers. |
| 22 | GST Amount for providing Service to Government Contract Works for the above works at 18%(9%+9%). {GST Amount is the Total GST Amount for overall quoted amount} Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysOct 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender