Tender For Special Repairs To Control Room Partitions, Doors, Windows, Floor And Other Repairs In Collectorate Building In Mpc At Tiruvannamalai In Tiruvannamalai District.
Tender Value
2.97 Lakhs
Estimated cost
Bid Submission
16 Oct 2026
13 days left
EMD
2970
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tiruvannamalai → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Control Room Partitions, Doors, Windows, Floor And Other Repairs In Collectorate Building In Mpc At Tiruvannamalai In Tiruvannamalai District.
BOQ
| Sl. No. | Item Description |
| 1 | Labour Charges for fixing aluminium doors, windows and ventilators etc., complete complying with standard specifications and as directed by the departmental officers. |
| 2 | Clean removal of cement plaster from walls etc., complete complying with standard specifications and as directed by the departmental officers. |
| 3 | Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 4 | Providing Vinyl Flooring 2mm thick etc. complete complying with standard specification and as directed by the departmental officers. |
| 5 | Supplying Fabricating and placing in position of Aluminium natural colour matt finish fixed Partition with MDF Board 12 mm thick the outer frame of the Aluminium section of size 101.60x44.45x3.18mm @ 2.319Kg/m. at internal vertical 2 Nos & Horizontal 1 No, mullion of aluminium section of size 62 x 38 x 2mm @ 1.174 Kg/m with necessary aluminium clips of size 79.15 x 17.27 x 1.50mm at 0.176 Kg/m with necessary rubbor beading L angles including dismantling and redoing masonry as concrete where necessary etc., complete. The Aluminium section are to be anodised with matt finish under electrically controlled condition in accordance with ISI 1868 /1962 specification for an average anodic film thickness of not less than 15 microns. All aluminium sections are should be got approved by Executive Engineer before use on works. |
| 6 | Supplying and fixing door shutters for Medium Density Fibre board of exterior grade, Plain including external lipping with Kiln dried soft wood of 30 mm thick conforming to IS 12406 / 1989 with necessary adhesive and C.P. screws, including fixing of aldrops, tower bolts, hinges and lock strike plates, putty, fevical, varnish for T.W. lipping with thinner colouring agent etc., The rate includes cost of materials and cost for aluminium furniture fittings such as 3 nos SS 304 Grade Butt Hinges of size(125mm x 30mm), 1 no Alu. aldrop 250 x 16mm, 1no Alu. tower bolt of 300x12mm and 1 no Alu. tower bolt of 200x12mm, 2 Nos Alu. Handles, 1 no door stopper with rubber bush incase of Single leaf door inclusive of labour charges for fixing in position etc., complete. All Aluminium furniture fittings are to be anodised with matt finish under electrically controlled condition in accordance with ISI specification 1868/1968 for anodic film thickness of not less than 15 microns, The rate is inclusive cost of fevical and fixing charges, transportation, loading, unloading and all other incidential charges, handling charges etc., complete complying with standard specification. |
| 7 | Distempering the old wall and ceiling Two coats with best oil bound distember of approved quality including preparation of surface, the rate includes cost of brushes, high scaffolding arrangements, neat finishes, etc., complete complying with standard specification and as directed by the departmental officers. |
| 8 | Painting Old iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with Two coats of best approved first quality and colour of synthetic enamel paint in all floors etc., complete complying with standard specification and as directed by the departmental officers.(The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 9 | SUB TOTAL |
| 10 | GST @ 18 % Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysOct 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender